Hi..
I bought a Vodafone V1605 ( HTC Tytn ) from ebay... the auction description indicated some alignment problems that could be resolved by screen re-alignment...
But when i got the package i found that the problem is worse than that... as you can see in the picture ( http://img81.imageshack.us/img81/4319/tytnscreenul8.jpg ) the top-right of the screen seems to be with problems.... I tries to draw several horizontal lines... and in the top-right part of the screen i got some waves...
I'm thinking about returning the phone... but can this be resolved by purchasing a new touch-screen ? I've seen that buying a replacing touch-screen is not very expensive....
Best regards,
A new touch screen might help. What also is a known issue is the screws at the back of the screen. Try to tighten these it helped for some guys allready.
I replaced my touch screen after i cracked it and now i can't get it to align at all.
I click anywhere on the screen and it thinks it's a click in the top left of the screen as the start menu opens up.
Haven't been able to find anyone to answer my posts for help either.
If there is dirt on the edges of the screen (between screen and cover) it can cause alignment problems as well. I had to recalibrate mine several times a day at some point as dirt would move and press different locations, biasing the digitizer. I got tired of it, dismantled the phone, took the LCD out, cleaned it as well as the inside of the case, and put it back together. No more issues so far.
kilrah said:
If there is dirt on the edges of the screen (between screen and cover) it can cause alignment problems as well. I had to recalibrate mine several times a day at some point as dirt would move and press different locations, biasing the digitizer. I got tired of it, dismantled the phone, took the LCD out, cleaned it as well as the inside of the case, and put it back together. No more issues so far.
Click to expand...
Click to collapse
Had exactly the same problem (and solution) for the screen alignment problem of my Xperia X1. I removed a tiny plastic piece (most likely a leftover from production process) which stuck between the metal frame and the touch screen. After that I could easily align the touch screen and have no alignment problems anymore.
Be careful to not break the screen - I used a thin sewing needle and tweezers to remove the plastic piece.
Hi,
The touch screen of my HTC elf doesn't work anymore.
I am going to order some parts to change the digitizer myself and also the casing to make it look a little newer.
Anyway, I'd like to understand how the touch functionality works exactly. Is it a pressure on the digitizer itself that make a "touch" or is it a pressure on the digitizer that press the screen and this action make a "touch" ?
When I power my disassemble Elf, a pressure on the screen itself doesn't do anything....
I'd like to know if I need to order a screen as well
Hi,
just replaced my own elf's digitizer a month ago... and the phone is like new.
To answer your question it's the digitizer that reads pressure and sends the data to the system (if you already disassembled it you should have noticed a flat cable that connects the digitizer to the board).
So if the screen on your elf is working you should solve the problem by replacing only the digitizer.
You rock, I order now
This is my first post here and though i read similar posts on this subject i would
like to read your opinions on this one.
I accidentally dropped some water on my touch hd and my display got damaged.The phone worked fine and so did the digitizer but the problem was that the backlight of the display was dead.At some point the backlight turned on but when i tried to input the unlock code it turned off right away (did this several times).I knew that i should replace the lcd (and the digitizer just in case).
I bought the lcd and the digitizer seperately and i managed to assemble the phone back using the service manual.Since then when i turn the phone on I hear the starting sound,i get the vibration then after a while the screen with no backlight again displays the "tap here to configure your phone" screen (after the hard reset),when i tap i get no response.
I checked the connections many times and i also used a second digitizer with no success.
Is there a possibility flashing a new ROM will solve the problem?
If so is there a way of flashing a ROM when the phone's screen is not usable?
Waiting for your precious opinions/suggestions/knowledge
Thanks in advance.
Hello,
Flashing the ROM won't solve an obviously hardware problem.
If you changed the LCD and still have no backlight, then either you bought a defective screen, or the problem is elsewhere, maybe on the main electronic board... Which would be bad news.
BTW, I wanted to change the digitizer in the apst years, but its not provided with the glue, so I had to buy a whole assembled screen + digitizer.
How did you manage to glue the digitizer on the screen ?
I aligned the screen with the digitizer and then i used small pieces of a special thin and trasparent tape to hold it in place.The tape holds the screen tight and it is barely visible, it also has the advantage that you can seperate the lcd and digitizer anytime you want with ease (though you have to be very delicate when applying it to get a good result)
I asked for a replacement of the defective lcd and i hope i will get a new one.
Hi guys,
What could be the possible reasons for a touchscreen and the capacitive buttons to stop working?
I purchased my Huawei U8800 only very recently but it was purchased 2nd hand. The phone came pre-installed with a custom rom, which is this one here: http://forum.xda-developers.com/showthread.php?t=1481168
I've had very minimal use of it ever since I received it, due to the reason that I have exams as I'm an UNI student. Therefore, I haven't modified the phone in any way, i.e I have not overclocked it or flashed a different kernel or recovery etc. The only thing I've done is installed GO SMS PRO and used it for txting and calling, that's it.
At first, everything seems to work fine. But on my 2nd day of use, the touchscreen started acting weird, where the right hand side of the screen stops working for no reason, as well as the 2 capacitive buttons on the right half of the screen (HOME and SEARCH). Then after a while, the BACK capacitive button on the left half of the screen stopped working, and eventually all 4 capacitive buttons and the entire screen stopped working.
The phone still turns on, but the entire screen doesn't pick up any finger input and there isn't any haptic feedback or vibration from the capacitive buttons. When I boot into the recovery, this is also the same.
So I contacted the seller about this, and he advised me to flash the Cyanogenmod 7.2 rom to see if this fixes the problem. It didn't, the touchscreen still doesn't work.
I'm wondering if this is related to the digitizer, which is the part of the phone that sense your finger inputs? If not, what are the other parts of the phone that could relate to the capacitive buttons and touch screen?
Definately a digitizer problem. The capacitive buttons are part of the touch screen, the touch screen is extended over the bottom of the display.
You should buy a new one from eBay or similar. If you want to buy it with a frame (black part on the front), you will have to open your phone to see if the front speaker is big or small. There are two types of front speakers and they are not cross-compatible. If you just want to buy the digitizer, you will have to remove the old digitizer from it's frame and add some glue on the new one to make sure it won't stick out.
If you don't want to mess with your phone, I am sure there are paid services that will do it for you, since replacing the digitizer is fairly easy.
Blefish said:
Definately a digitizer problem. The capacitive buttons are part of the touch screen, the touch screen is extended over the bottom of the display.
You should buy a new one from eBay or similar. If you want to buy it with a frame (black part on the front), you will have to open your phone to see if the front speaker is big or small. There are two types of front speakers and they are not cross-compatible. If you just want to buy the digitizer, you will have to remove the old digitizer from it's frame and add some glue on the new one to make sure it won't stick out.
If you don't want to mess with your phone, I am sure there are paid services that will do it for you, since replacing the digitizer is fairly easy.
Click to expand...
Click to collapse
thanks for your reply mate!
Ok so I've found this one here:
http://www.ebay.com/itm/Original-To...Glass-For-Huawei-U8800-Ideos-X5-/170721993712
Since it says it's "original", I don't have to worry about the speaker problem right?
chaoscreater said:
thanks for your reply mate!
Ok so I've found this one here:
http://www.ebay.com/itm/Original-To...Glass-For-Huawei-U8800-Ideos-X5-/170721993712
Since it says it's "original", I don't have to worry about the speaker problem right?
Click to expand...
Click to collapse
They are selling the digitizer, so there will be no problems as it's only the digitizer glass and not the frame around it. The frame itself is holding the digitizer and the speaker so that's why there may be issues when buying the front cover.
If you need a disassembly tutorial, check my Mediafire (signature) -> Documents -> U8800 Basic Maintenance Manual. It's the official disassembly guide so you can be sure you are doing it right .
Blefish said:
They are selling the digitizer, so there will be no problems as it's only the digitizer glass and not the frame around it. The frame itself is holding the digitizer and the speaker so that's why there may be issues when buying the front cover.
If you need a disassembly tutorial, check my Mediafire (signature) -> Documents -> U8800 Basic Maintenance Manual. It's the official disassembly guide so you can be sure you are doing it right .
Click to expand...
Click to collapse
Wait, that doesn't have the frame around it? I thought the black part surrounding the glass is the frame? I'm confused.......
I just want something that looks exactly like shown in that Ebay listing photo, where it has that bit of the connector part that you push into the motherboard (or whatever it's called on the phone).
chaoscreater said:
Wait, that doesn't have the frame around it? I thought the black part surrounding the glass is the frame? I'm confused.......
I just want something that looks exactly like shown in that Ebay listing photo, where it has that bit of the connector part that you push into the motherboard (or whatever it's called on the phone).
Click to expand...
Click to collapse
On your listing, it does not have frame.
If it's without frame, it is simply the front glass with connector. If it is with the frame, it has the black curve too (and speaker with led).
See this:
Without frame.
With frame.
Hope it makes sense now
Blefish said:
On your listing, it does not have frame.
If it's without frame, it is simply the front glass with connector. If it is with the frame, it has the black curve too (and speaker with led).
See this:
Without frame.
With frame.
Hope it makes sense now
Click to expand...
Click to collapse
Ahh ic ic.....so would I need to use glue to stick the digitizer glass onto the frame?
chaoscreater said:
Ahh ic ic.....so would I need to use glue to stick the digitizer glass onto the frame?
Click to expand...
Click to collapse
Yeah, but not much. Maybe you don't need to add any glue at all, the old one might hold it too.
u8800-51 touch screen bottom not responding
Blefish said:
On your listing, it does not have frame.
If it's without frame, it is simply the front glass with connector. If it is with the frame, it has the black curve too (and speaker with led).
See this:
Without frame.
With frame.
Hope it makes sense now
Click to expand...
Click to collapse
hi blefish
just posted a similar question:
http://forum.xda-developers.com/showthread.php?p=39201328#post39201328
is it the same solution? (the 4 buttons at the bottom do not work as well as the lower half of screen)
my speaker is 15 mm by 5 mm long (i looked inside). is it big or small?
all the ebay posts do not mention a frame - i will be happy not to mess with the glue
thanks
huwaei G 510
Hi guys,
I did have the same problem with a Huawei G 510. Digitizer broken and replaced, but still not working.
I have no action on screen. It lits but i can't press any button. Either the 3 buttons are working.
Checked the plug, checked some voltage in the pins.
Any other ideas ?
Thanks in advance,
Miltos Matt
Hey guys,
broke my Nexus 4 screen a few years ago - now I wanted to replace it just so I have a backup phone.
I removed the glass with some tools, and while doing so another layer at the bottom of the screen came off. (exactly the part that was broken and didnt respond to touches)
It now shows solid white color when the phone is turned on, and I cant find any info wether this layer
is supposed to come off while changing digitizer and glass or not.
Have I borked this completely? Would like to know before I waste money on the Digitizer + Glass instead of just getting a new front frame.
Edit: Okay found out that this is the polarizer which is pretty cheap on the internet.