Database Users

CINGULAR GPRS

I am wondering where the password information is stored for the cingular gprs settings. I am not asking how to enter the settings into the dialogues, rather where in the registrythe password info is stored.
I am aware of the settings located at these two locations...
[HKEY_LOCAL_MACHINE\Comm\ConnMgr\Providers\{7C4B7A38-5FF7-4bc1-80F6-5DA7870BB1AA}]
and
[HKEY_CURRENT_USER\Comm\RasBook\My ISP GPRS]
Exporting/importing these restores everything but the username/password info. What I am trying to do is save the settings so I will be able to more quickly restore them after a hard reset, which I do often because I am constantly playing with different roms.
or... is there already a premade cab file that will install the needed settings including cingular's generic username/password?
and for that matter, where is the password stored for activesync? After I import a reg file I have on my phone, I have all the activesync info properly entered except for the password.
I realize these are one time items to have to enter, but it would certainly make system rebuilding go a bit faster...
I hope you managed to get this far into this rather overly verbose essay.

found it.
hell yes:
[HKEY_LOCAL_MACHINE\Comm\Security\CredMan\Creds]
I am cool.

Okay, the question I have then is how did you figure it out, and more importantly, how do you know which key is associated to which connection?

Some crappy registry snapshot program
It is called ssnap, that coupled with a program called idiff, I was able to discover changes made to the registry after doing something (check/uncheck something, enter a setting, etc...)
http://s-k.al.ru/wince.html
If anyone knows a better program than these rather primitive monsters, please let me know. I am looking for something similar to installwatch for the PC by Epsilon Squared.
Those settings did not work anyway. That was definately the location where the settings were stored, but they must be coupled with something else. I was able to install and uninstall the username/password by setting/removing those registry entries, but after a hard reset, they did not work anymore.

Workaround to avoid GPRS connections conflict with phone calls

I found this in a post. when i go to "add value" in the the reg editor (TC) what type of file is this and where do i enter the string? is that comma in the front part of the code, or just grammer?
thanks
Workaround to avoid GPRS connections conflict with phone calls
HKLM,"Drivers\BuiltIn\RIL","GPRSStallWorkaround",0 x00010001,0

Code:
[B]HKLM\Drivers\BuiltIn\RIL[/B]
[B]Dword-[/B] '[I]GPRSStallWorkaround[/I]' value should be '[I]1[/I]' (Decimal)

thanks.. why would the poster write that instead of what you wrote? just trying to understand how it works..
thanks,
ada,

thanks. why did the orignal poster of that code just write what you wrote? Just trying to understand how this works.
thanks,
adam

tried this, still doesnt work...ofcourse i did a softreset, yet it doesnt work...

Bluetooth and USB DUN Tether on verizon TP2

I had a very hard time finding this information so I thought I would post a topic. If it is somewhere hidden in these 50 pages of threads I am sorry.
Bluetooth & USB DUN Tethering on the Verizon TP2
Dial ##778
Click Edit
Unlock Code is 000000
Click View Info
Scroll Down to M.IP Default Profile
3rd row down is DUN NAI
Click DUN NAI and then click Menu
Then Edit
Change the Value to (yournumber)@vzw3g.com
example [email protected]
Click ok
Click Menu , OK
Should Soft reset and then you are good to go!
In fact I am typing this on my laptop which is bluetooth tethered to my TP2 right now
Enjoy

I have a vx5600 accolade. I also just bought a new laptop / Windows 7
I used my old phone on my old laptop to connect to the internet.
Won't let me do now. I tried dialing the ##778
Did not work. Is there another number, or way to unlock my phone?
Sam
[email protected]

Any way to do this on ATT Tilt 2? what is the dialing code?
Thanks much!

is this for getting your computer to recognise your phone again if there is n glitch in the rom?

EPST on Hero

Ok, so i need to change some of the settings in EPST. Cant change a good portion of what i can see/view, yet on the Eris, there's a full working EPST and you can basicly edit anything you can see. Is there something im missing or need to do to make the values editable and or has anyone tried to use the Eris EPST on the Hero?
Thanks, in advance..

need password to edit EPST on Hero
When accessing the EPST on the Hero, I get:
1. View Mode
and
2. Edit Mode
View mode has two options:
1. User Name (Active Profile, user Name, SPI MN-HA, SPI MN-AAA, Reverse Tunnel Preferred, Home IP, Primare Home Agent, Second Hoome Agent, DSA Server URL)
and
2. Advanced [ESN(dec), MEID(hex), P_REV, SCM, Slot Mode, Slot Cycle Index, MCC, MNC, MSID, ACCOL, Vocoder, Home Orig, Roam Orig, Home Sys Reg, Foreign SID Reg, Foreign NID Reg, MN HA SPI Set, MN AAA SPI Set, Home SID/NID #1]
Edit Mode has:
A Password Protect!!! Hence the post
Anyone know the password, or how to obtain it?

That's your MSL number. There is a thread that has a step by step on how to get it. I got mine that way but don't remember at all which one is it. Search MSL number and stuff like that and you should find it.

Sprint will give u the msl number. It may be tricky. Like call up and say data isn't working and say u can't make it to a store. Something like that or just try asking for it. They may give u some kinda run around. But they can and will give it to u. I had issues with my diamond and data not working. I called up and they actually had me go into epst and gave me the password and all. I think though they had me look at it first and see if a setting had a 1 or a 0 by it and it had a 0. So then they asked me to go in and edit it and put a 1 on instead. Anyhow it went something like that. Is say to call up and ask or give them a line of **** and ill most likely get it. Good luck

[Q] ## Codes Programming

I am looking for the ## codes for the fascinate. I am sure that someone is able to find them. I have searched the web for hours and not found any that will work with the fascinate. I am only looking, because I am sure that just like my incredible I can change the IP settings and use the wifi tethering for free on the fascinate too.
I appreciate any and all help to get these codes.

Have you tried the codes that work on the international I9000, Samsung's first Galaxy S model?

Thanks for the link. I tried about half of those and none of them work. I think their must be a set of codes specific to the CDMA version.

I was able to get a few codes out of a verizon represenative, but not everything.
This code enables the ability to use the second code I got.
*#22745927
you then enter 000000 for the spc
and change to Hiddenmenu Enable and press ok.
the type **772
you then enter 000000 for the spc
This will enable you to manually program the NAM.
Now I just need the code to modify the network settings for the data portion of the phone.

candrist said:
I was able to get a few codes out of a verizon represenative, but not everything.
This code enables the ability to use the second code I got.
*#22745927
you then enter 000000 for the spc
and change to Hiddenmenu Enable and press ok.
the type **772
you then enter 000000 for the spc
This will enable you to manually program the NAM.
Now I just need the code to modify the network settings for the data portion of the phone.
Click to expand...
Click to collapse
Verizon told me to do *228 option 2 to re-sync roaming towers to get a better signal.