I have a Mogel (PPC6800) that I made work on Verizon (thanks to many fine posters here).
I convinced the techs to add my ESN but they say the data won't ever work. I know that someone here, that is smarter than I am, will be able to prove them wrong. I have copied everything that is editable from my XV6700 into the EX-Mogel now XV6800 but it still doesn't work yet.
Please someone with some smarts guide me to what needs to be done. It looks like the following items MAY be what is keeping me from being able to access it:
* The NAI is blank on the M.IP Customer Profile 1 screen.
*I don't know what to put in the HDR AN AUTH Password Location (the contents are scrambled)
*On M.IP Default Profile, the DUN NAI info is blank.
* On M.IP Default Profile, the HA Shared secret is :Secret and the AAA shared Secret is: scrambled text.
*On all the other screens, the HA shared Secret and the AAA shared secret is blank.
Other than these unknowns (unknown because I don't know if any of these are important) Everything looks the same as my XV6700.
hopefully, someone will know these answers and can help all of us move the cheaper Mogels to Verizon. I say cheaper because Mogels are $150 - $225 less than XV6800s on Ebay.
Other post shows exactly how to move the voice portion of the phone over with relative ease but the DATA?????
Thanks
http://forum.xda-developers.com/showthread.php?t=376829
and
http://forum.xda-developers.com/showthread.php?t=376873
may help!
With the DroidX how do you get in to the EPST to edit it I have tired ##778# with no success. I am wanting to edtit the DUN settings.
Thanks
Bumping this up
Do we need to be able to do this?
its ##program or ##7764... something or the other just spell the word program with the key pad. the PW is 000000. i didn't notice any dun settings in there thought. if you see anything intresting let me know
There are two similar setting programs. First is PST (##7764726) and the other is *#*#4636#*#* the second may have what you are looking for..
I am looking for the ## codes for the fascinate. I am sure that someone is able to find them. I have searched the web for hours and not found any that will work with the fascinate. I am only looking, because I am sure that just like my incredible I can change the IP settings and use the wifi tethering for free on the fascinate too.
I appreciate any and all help to get these codes.
Have you tried the codes that work on the international I9000, Samsung's first Galaxy S model?
Thanks for the link. I tried about half of those and none of them work. I think their must be a set of codes specific to the CDMA version.
I was able to get a few codes out of a verizon represenative, but not everything.
This code enables the ability to use the second code I got.
*#22745927
you then enter 000000 for the spc
and change to Hiddenmenu Enable and press ok.
the type **772
you then enter 000000 for the spc
This will enable you to manually program the NAM.
Now I just need the code to modify the network settings for the data portion of the phone.
candrist said:
I was able to get a few codes out of a verizon represenative, but not everything.
This code enables the ability to use the second code I got.
*#22745927
you then enter 000000 for the spc
and change to Hiddenmenu Enable and press ok.
the type **772
you then enter 000000 for the spc
This will enable you to manually program the NAM.
Now I just need the code to modify the network settings for the data portion of the phone.
Click to expand...
Click to collapse
Verizon told me to do *228 option 2 to re-sync roaming towers to get a better signal.
--**Here's a method to get the Epic flashed to cricket with internet and apps***--
***Edit- I cleaned up my post and attached a good PRL to use (42700) and "ConnectBot.apk". I also believe I have MMS sorted out. I'm gonna double check everything later tonight to make sure there's no issues and I'll update my post accordingly.
---Requirements---
*Download and install Qpst. 2.7 build 355
*Download and install normal Epic 4g drivers.
*Cricket prl. (42700 PRL is what I recommend. I've attached it to my post)
*USB Cable
*Your MSL.(I attached connectbot to my post in case you need it)
_________________________
---Getting your MSL---
-If you know your MSL already you can skip this part and start at the "Getting started and setting up QPST".
1. Find and install "Connectbot" found in the market or at the bottom of my post.
2. Select the dropdown box on the bottom left that says "SSH", and choose "local". Put whatever you'd like in the nickname box and hit "enter".
3. Click on "Android".
4. Use the command "getprop ril.MSL" and hit "enter".
5. Your MSL should now be displayed.
...If that doesnt work...
1.Type "getprop" instead.
2. It should show a long list, scroll down to the section that starts with "ril".
3. You should see "ril.msl", the 6 digit MSL number will be after that.
---Getting started and setting up QPST---
1. Plug in your phone to your computer and when prompted to choose between "Charging, mass storage, or tethered modem", choose "Tethered modem", then choose "3g modem".
2. Open up QPST > "QPST Configuration". Click on the "Add new port" on the bottom right. Uncheck mark the "Show serial and USB ports only". In the box above it, you should see your phone connected and the corresponding COM port. Select it and the "Port" and "Port label" will autofill. Hit "Ok".
3. Open up QPST > Service programming. Select your phone in the "Select an active phone" box.
Click on "Read from phone" and enter your SPC when prompted.
***(Note: If you are having trouble with QPST recognizing your phone, instead of using the "Tethered modem" method when plugging in your phone, dial ##8778# and switch both the "UART" and "USB" options to "MODEM". QPST should then see your phone. Revert the "MODEM" option in the previous menu to "PDA" when done.)
---For talk/text---
1. You will first write a new prl to your phone. Cricket prl 42700 is preferred.
2. Click on the "Roam tab at the top.
3. Click on the "browse" button under "Preferred roaming" and locate the prl file you wish to write.
4. Click on "Write to phone".
5. Let QPST do it's thing and voila, your new PRL will be written to your phone.
---For internet---
1. Click the "M.IP" tab (may be "M.IPv6") and set "Mobile IP Behavior" as "MOB + Simp".
Select any profiles listed under "user profiles" and click edit. Do the following for all profiles:
Make sure that "profile enabled" is checked and enter in the following:
NAI: [email protected]
Tethered NAI: [email protected]
2. Change "home address", "primary ha", and "secondary HA" to all zeros.
3. On both "HA Shared" and "AAA Shared Secret, select the "enter text string" and type in the following password (all lower case): "cricket".
4. Click "Ok".
5. Set active user as "0".
6. Click "PPP Config".
7. Click the "Um" Button.
8. Under user ID enter: [email protected] as well as for tethered NAI. If a text box is black with red lines in it, click it and press ctrl + D. Enter "cricket" in the password box.
9.Click the "AN" Button and repeat the last step.
10. Click "write to phone"...After that, you should now have the 3g icon on your phone.
11. Last step to get internet and apps working, if you're already activated on cricket, is to call customer service and have them switch you to the 55 dollar Android plan.
_________________________
*Please note: They have a 55 dollar "All-in" plan, as well as the $55 Android one. So make sure you're put on the right one. I've had most luck by asking to speak with the "Smartphone department" and then requesting them to have my equipment and plan changed.
**Thanks to anderdroid for testing Android plan with fascinate.
Hope this helps! PM me if you need a download link for QPST.
how would if you do it using QPST?
I am still waiting for mine to arrive but I always use QPST to inject to other networks and unlock the EVDO
wait for further infomation, because i want to use it in China, where the carrier situation is a little complicated.
cdma isn't carrier locked, if its the same frequency then you should se if cricket will flash it for u
cricket flash
do ##8778# and select modem to get com port, samsung default 16 digit password, write prl, and done. for talk and text
kc720 said:
do ##8778# and select modem to get com port, samsung default 16 digit password, write prl, and done. for talk and text
Click to expand...
Click to collapse
what is samsung default 16 digit password? Where I could find the password for my samsung epic 4G. If some one could help me I will donate. thanks
kc720 said:
do ##8778# and select modem to get com port, samsung default 16 digit password, write prl, and done. for talk and text
Click to expand...
Click to collapse
Alternatively...you can install the regular Epic drivers and plug in the phone...when given the three choice prompt, choose "tethered modem"...then select 3G tether. The phone will then connect on a COM port and you can then connect to your phone using CDMA Workshop, QPST, or whichever programming tool you prefer and flash the prl that way. I'm still working on getting the data up and running.
cineung02 said:
what is samsung default 16 digit password? Where I could find the password for my samsung epic 4G. If some one could help me I will donate. thanks
Click to expand...
Click to collapse
Default 16 digit should be 01F2030F5F678FF9, give it a try. You can also use CDMA Workshop to read and change your Epic's SPC, which is the way I prefer.
So, quick question, do I need a specifically modded rom to run my Epic on Cricket, or is it that I can use any rom and then flash the phone??? I'd like to know this because I bought the phone off contract and would like to use it on Cricket. -thanks
dcorn619 said:
So, quick question, do I need a specifically modded rom to run my Epic on Cricket, or is it that I can use any rom and then flash the phone??? I'd like to know this because I bought the phone off contract and would like to use it on Cricket. -thanks
Click to expand...
Click to collapse
Nope, doesn't need to be any specific rom. It can be whichever one, even the stock one.
Sick!!! this makes my life so much easier thanks!
I finally managed to write AN data parameter for EV-DO, using QPST 2.7 build 355, other version wont write the ev-do parameter. Data is ON now for my network.
This is only because my carrier using simple IP, I believe cricket is using a mobile IP, so the case might be different.
Well, I'm kinda new at this flashing business and my contract with my gsm provider has been over. I just wanted to transfer my number onto my new epic 4g on cricket but so far I haven't found a dealer who can do it, can anyone help me out, maybe post a tutorial or guide, it would be hugely appreciated
dcorn619 said:
Well, I'm kinda new at this flashing business and my contract with my gsm provider has been over. I just wanted to transfer my number onto my new epic 4g on cricket but so far I haven't found a dealer who can do it, can anyone help me out, maybe post a tutorial or guide, it would be hugely appreciated
Click to expand...
Click to collapse
Assuming you have your MSL...
-Requirements
*Download and install Qpst. 2.7 build 355
*Download and install normal Epic 4g drivers.
-Plug in your phone to your computer and when prompted to choose between "Charging, mass storage, or tethered modem", choose "Tethered modem", then choose "3g modem".
-Open up QPST > Service programming. Select your phone in the "Select an active phone" box and click on "Read from phone" and enter your SPC when prompted.
For talk/text
1. Write a cricket prl using the "roam" tab, Cricket prl 32100 is preferred.
2. Click on "browse" and locate the prl file and then click on "write to phone".
For internet
1. Click M.IP (may be M.IPv6 and set Mobile IP Behavior as MOB + Simp.
Select any profiles listed under user profiles and click edit. Do the following for all profiles.
Make sure that "profile enabled" is checked and enter in the following:
NAI: [email protected]
Tethered NAI: [email protected]
2. Change home address, primary ha, and secondary HA to all zeros.
3. On both HA Shared and AAA Shared Secret, click enter text string and type in the following password (all lower case): cricket
4. click ok
5. Set active user a 0.
6. Click PPP Config
7. The "Um" Button
8. Under user ID enter [email protected] as well as or tethered NAI. If a text box is black with red lines in it, click it and press ctrl D. Enter cricket in the password box.
9.Click "AN" Button and repeat the last step.
10. Click "write to phone"...After that, you should now have the 3g icon on your phone.
11. Last step to get internet and apps working, if you're already activated on cricket, is to call customer service and have them switch you to the 55 dollar Zio android plan. They have a 55 dollar "All-in" plan, as well as the zio one. So make sure you're put on the right one.
I made this in a hurry, but I believe I got everything.
**thanks to anderdroid for testing Zio plan with fascinate.
***Edit- Since I'm a new member, it wouldn't let me post the links to the downloads of Qpst and the 32100 cricket PRL. PM me if you need either.
Now if there was a way to make sprint think this was a Hero and not an Epic then we could avoid the $10 charge. That's the only real reason I have went back to the Hero.
Wow, great guide, thanks! Just a couple o more questions, sorry. Where one has to input the 10 digit cricket number it is assuming then that you have an account already and that you'll be moving to 55 dollar plan in order to achieve that change to 3g enabled correct?
dcorn619 said:
Wow, great guide, thanks! Just a couple o more questions, sorry. Where one has to input the 10 digit cricket number it is assuming then that you have an account already and that you'll be moving to 55 dollar plan in order to achieve that change to 3g enabled correct?
Click to expand...
Click to collapse
No problem, but to answer your question...yes, it is assuming that. You can get your account set up first and flash the text/talk portion using the steps above and once that's done, you can get the internet set up and working...
Perfect, thanks! :]
If anyone would like screen dumps I can do this... There were a couple of steps I needed to do to connect.
Thanks for the help everyone!
EDIT:
Rock on... Got data now! I had to do this all because my wife and I are going through a divorce. I purchased the phone, but it was on her account. Well she decided to turn it off, and I remembered hearing about how everyone changed their phone over to Cricket...
The store that I started my Cricket service with gave me the all in 55 plan. Had to make a call tonight to get it changed. Nothing happened after the first call and after the second call I asked if there was anything I needed to do. He told me to dial *228 talk and then it would reboot itself. I was hesitant because I thought this might be standard operating procedure for just the Zio. I dialed it and listened to the message. Then it hung up and a pop up screen said CDMA call dropped. There was an X inside of a circle next to the signal bars. I finally rebooted it and then the data worked.
I got the MSL by using ConnectBot from the market and followed this procedure, logging in local (bottom left drop down menu), typing a random username, connecting, and using the "getprop" command.
What will we have to do to get the Froyo update though?
I need those couple extra steps to connect since I'm having trouble getting the phone recognized by QPST please
Open QPST Configuration > Ports > Add New Port (you may have to uncheck Show Serial and USB....)
If you can't locate the port based on the results then go into your Device Manager on your computer. Check under COM ports there to see what your Samsung is under. After you add this port then you should be able to use QPST Service Programmer.
Uh another cool thing is that I can use the Sprint Hotspot utility. I took the security off and it works. 3g hotspot for free and without root.
1043kb down 150kb up, w/ 2-3 bars
well anyways people are getting cheated by the cricket company on flashing and junk but i assure you that this well work without the *228 CRAP
first offfff if yours is rooted with z4root you have to factory reset it cause z4root wont work with that junk
dail ##778 and go to the prl setting update it with this file http://www.mediafire.com/?t6o7shabflfj4hh then hit menu and commit changes wait until it reboots.
mmkkk then now go back into pst setting go to nam and name the NAM name cricket and MDN your number like 555-555-555 you get the example lol
now the MIN1 should be your other number (which you obtained from cricket themselfs) like 555-5555 and the MIN2 should be your area code
and MSID should be the MIN2 and MIN1 combined together in that order MCC should be 310 and the ACCOLC should be 1 leave the rest of the alone then go to CDMA setting and put EVRC shhould be disabled and everything im going to post below is from thisss guyy
http://forum.xda-developers.com/member.php?u=1430573 Click view info click modem settings, change slot cycle index to 1, This will make the phone ring a little sooner, also get your texts a bit sooner. The other 4 options should be Auto, Auto, Enable, No in Order from top to bottom.
8. Click View Info and pick Security, now we are changing this regardless you must do this, we are going to Unauthenticate you and Re-authenticate, it is a Needed step everything in this How To needs to be done and Not skipped! Change the HDR Auth User ID to something bogus like [email protected], the password below it make it something random but remember it, now do the same for PPP user ID and password but make them the same as the HDR ones.
9. Click view info and pick MIP Settings, Make sure Active Profile is on 0, MIP mode should be Simple IP only, MIP reg retries should be 1, MIP reg retry timeout should be 2000 ms, MIP pre-reg timeout should be 30, Mobile Node HA auth should be Disable, send a reg request should be Enable, dormant handoff to disable.
10. Click view info and pick MIP Default Profile, Enable profile should be ENABLE, NAI should be [email protected], MN HA SPI set should be enable, MN HA SPI value should be 12c, MN AAA should be enable, MN AAA SPI value should be 2, reverse tunneling should be enable, home address should be 0.0.0.0, Primary HA address should be 68.28.15.12, secondary should be 68.28.31.12, HA shared secret and AAA secret should be cricket <--lowercase, DMU public should be 0, MN Authenticator should be 0.
11. Click view info and pick MIP customer profile 1 and make sure Enable profile is DISABLED. Now do the same with the other 4 profiles (profiles 2-5), make sure that the only profile enabled is MIP Default Profile.
12. Ok now click menu, ok and let it reset, but make sure not to do anything we are going to be going right back INTO EPST, so when it boots back up open the Phone application and dial ##778 call button (PST/EPST), we are going to re-authenticate you its easy, now click edit and enter six zeros, click view info and goto Security, now change the HDR AN Auth to [email protected], password should be cricket<--lower case, same for PPP user id and Password make them same as HDR.
13. Click view info and goto MIP default profile, make sure the HA, and AAA shared secrets are both cricket<---lowercase, then click menu OK and let it reset.
and p.s. for mms to work you download backup restore then reboot into recovery and and flash this file cricket web/mms downthere some where and here are the apns to restore it 475191View attachment 475191 on the apn setting go to the apn and restore app and then click delete then restore from your apn file i gave there you go and if you need like help and junk message me or something
Now how are people on froyo without epst supposed to do this?
Sent from my Vanilla FroShedYo using XDA App
Do a nand backup of your Froyo ROM
flash a SenseUI ROM like xtrSense
Do the ##778 stuff.
Do a nand restore of your Froyo ROM
then do your APN Backup & Restore business
profit
pkopalek said:
Do a nand backup of your Froyo ROM
flash a SenseUI ROM like xtrSense
Do the ##778 stuff.
Do a nand restore of your Froyo ROM
then do your APN Backup & Restore business
profit
Click to expand...
Click to collapse
what he saaid lol
Which Roms or any particular? Anyone tested CM7.03 2.3.3?
I'm running CM7.03 GB 2.3.3 on D1. Has anyone tested this config?