Related
In the quest for free tethering, I have got many different sources telling me many different techniques. Below are some of these techinques:
***IMPORTANT*** - Before you modify registry settings, make a backup using SPB backup or Sprite Backup. I tried to tether before changing the registry, and my internet got locked out permanently. I had to hard reset my phone because I didn't have a backup. If this happens to you (it will say your vision username and pass are incorrect, no matter what you do) then you can restore your backup and try again. You shouldn't have this issue if you change the registry keys and connect first before attempting to use the internet sharing app.
Here's the registry keys you need to change to hide that you're tethering:
get a registry editor like total commander, and go into
HKLM --> Software --> OEM --> Wmodem
Set every key in there (I think there's 4 IIRC) to zero.
This will disable tethering detection,and then you can actually go into settings --> connections --> Manage Existing Connections (under Sprint),and then change your default connection method to "Phone as Modem" instead of Sprint PCS.
after changing the registry keys and connection settings, you will want to soft reset, and then when your phone boots back up, you need to connect to EVDO by opening internet explorer. Once you are connected, you can close internet explorer, open the internet sharing app, change the connection from sprint pcs to phone as modem and then click 'connect' to start your tethering. It will do the rest by itself.
As a note, using the PAM as the default connection setting will give you a boost in download speeds as well, from what I've seen and what others have reported. Happy tethering!
________________________________________________________________________________________________________________________
Now that I look at it, there are three keys to modify... CheckProfile, Multi-NAI, and WModemDUN.
I am thinking that the CheckProfile key allows the phone to check your profile on sprint to see if you have the PAM service.
I think the WModemDUN is disabled by default anyway, and am not sure what it does. But I do know that I can connect all day now using Phone as Modem and tether with no issues and no additional programs to install
______________________________________________________
you need PHM Registry editor found here: http://www.phm.lu/Products/PocketPC/RegEdit/
now navigate to:
HKEY_LOCAL_MACHINE\SOFTWARE\OEM\WModem
and set all the values to 0
ok, so if you disable all 3 then sprint wont see it as tethering then?
Click to expand...
Click to collapse
Which of these should I use, If any? Help me!
bump! anyone?
if the new rom then use the cab added just unzip it then install it to ur phone...http://forum.ppcgeeks.com/showthread.php?t=30265 here is the link I got if from it u want to read up on it.
-edit-
I forgot to say wait a few mins then do a reset for the settings to take affect.
all you have to do is load the sprint test rom and go into registry to delete the key that says ipsext.dll and tether away all day all long. umm... that is until they see your data usage amounts and cut your account off since there going to start limiting now.....
udontknowmehomi said:
all you have to do is load the sprint test rom and go into registry to delete the key that says ipsext.dll and tether away all day all long. umm... that is until they see your data usage amounts and cut your account off since there going to start limiting now.....
Click to expand...
Click to collapse
would you please elaborate on this, i.e. have you read an article somewhere?...?
well yea theres lots of posts on how to do this already....so im not taking any credit but heres what I did. I used the cokemans unlocker and loaded the alltel rom which I didnt like. So then I flashed the sprint test rom, after I did that the internet sharing under the com manager was greyed out or disabled. To fix this I loaded phm registry editor and went here...
HKEY_LOCAL_MACHINE/Comm/InternetSharing and deleted the value that said ipsext.dll and powered down the vogue. After booting back up my internet connection sharing was now working and not greyed out anymore. Ive seen other posts where the value they deleted was something else besides ipsext.dll but thats what it was on mine anyway. The data capping you can google and see there now capping at 5gig which is alot unless your using it for your only internet.
udontknowmehomi said:
well yea theres lots of posts on how to do this already....so im not taking any credit but heres what I did. I used the cokemans unlocker and loaded the alltel rom which I didnt like. So then I flashed the sprint test rom, after I did that the internet sharing under the com manager was greyed out or disabled. To fix this I loaded phm registry editor and went here...
HKEY_LOCAL_MACHINE/Comm/InternetSharing and deleted the value that said ipsext.dll and powered down the vogue. After booting back up my internet connection sharing was now working and not greyed out anymore. Ive seen other posts where the value they deleted was something else besides ipsext.dll but thats what it was on mine anyway. The data capping you can google and see there now capping at 5gig which is alot unless your using it for your only internet.
Click to expand...
Click to collapse
I have a Sprint Vogue (HTC Touch) and followed the registry path you said and found the value isext.dll not ipsext.dll. Do you think these are the same? After deleting it, the "use phone as modem" showed up in Internet Sharing.
BTW, thanks for the info!
If you go to PPCHaven, register, and go to Premium Content, DHarvey has posted a .cab file for fixing this.
crazy treo 800
I remove the dll in registry setting in internet sharing.
I can't receive phone calls, my internet hangs in 1x mode
and drop off evdo mode even having 5 bars.
anybody
Anybody know how I can fix this without adding back the registry setting.
I still want to tether
I have an mp6900sp vogu100 by sprint, and I can tether (with no consequence so far...) by doing the following:
1. Go to your comm mgr.
2. Turn on internet sharing.
Now comes the tricky part... If you try to connect, it will not let you unless you have a phone as modem plan. So...
3. Go to Menu (bottom right) and select 'Connection Settings'.
4. Select the 'Advanced' tab.
5. press the 'Select Networks' button.
6. Select 'My Isp" for the second drop down menu (private network).
7. Press the 'Edit' button under the second drop down menu (private network).
8. Press and hold down your stylus on the 'Phone as Modem' name until the pop-up menu appears, and select connect.
At this point, you should see a window appear which states the phone is dialing to make connection. If all goes well, it should connect, and all you have to do is go back to the first screen after turning on the internet sharing switch(by pressing 'OK' 3 times I think), and select 'USB' for PC Connection and press the 'connect' button at the bottom lefthand side of the screen. Hook up your usb cable at this time and you should now be tethered to your computer.
I believe you need to have active sync installed in order to create the actual network connection on 'Windows'. Linux machines should connect automatically using the rndis driver.
hope this helps
In another thread in the Dev section someone mentioned that after you apply the leaked 2.2 update that you would be able to use the 3G Mobile Hotspot just like Wireless Tether, without charges from VZW. Is there any truth to this?
As I understand it, you can turn the feature on, but once a client connects, it will bring them to a VZW page telling them that you need to have said feature enabled on your account.
partizan81 said:
As I understand it, you can turn the feature on, but once a client connects, it will bring them to a VZW page telling them that you need to have said feature enabled on your account.
Click to expand...
Click to collapse
Ah well that sucks, really would be nice if it were to work. It seems like a nice app.
dial ##778, go into edit mode, the password is 000000, once in go to M.IP Default Profile and edit DUN NAI from [email protected] to [email protected]. Then hit menu and press commit modifications. It should then reboot or w.e and your done. Free 3g hotspot app
At least thats how other people have said to do it
chris61292 said:
dial ##778, go into edit mode, the password is 000000, once in go to M.IP Default Profile and edit DUN NAI from [email protected] to [email protected]. Then hit menu and press commit modifications. It should then reboot or w.e and your done. Free 3g hotspot app
At least thats how other people have said to do it
Click to expand...
Click to collapse
Hmmm interesting, I don't have the leaked update installed it was more of a curious question. Care to tell me where you found that info? I would like to read more.
StirCwazy said:
Hmmm interesting, I don't have the leaked update installed it was more of a curious question. Care to tell me where you found that info? I would like to read more.
Click to expand...
Click to collapse
idk where i got it from, its been posted in multiple threads though when the OTA was 1st leaked
re
chris61292 said:
dial ##778, go into edit mode, the password is 000000, once in go to M.IP Default Profile and edit DUN NAI from [email protected] to [email protected]. Then hit menu and press commit modifications. It should then reboot or w.e and your done. Free 3g hotspot app
At least thats how other people have said to do it
Click to expand...
Click to collapse
Yup this works with 2.2
chris61292 said:
dial ##778, go into edit mode, the password is 000000, once in go to M.IP Default Profile and edit DUN NAI from [email protected] to [email protected]. Then hit menu and press commit modifications. It should then reboot or w.e and your done. Free 3g hotspot app
At least thats how other people have said to do it
Click to expand...
Click to collapse
If you have previously used this method from stock 2.1 it also carries over from any type of wipe or installing the new radio.
I currently have the tethering plan through VZW from when I had my storm. I decided to take 3G Hotspot for a quick spin.
-WPA2
-AP Mode
-15 Devices max
Are all available.
Nothing special if you're rooted and use wifitether.
I am on the new FroYo leak and I just tried this with the included "3G Mobile Hotspot" app and it didnt work. I double checked my DUN NAI, and it is set to [email protected]. I could see and connect to my hotspot, but no web pages would load. Anyone have any ideas?
sprintrjm said:
Yup this works with 2.2
Click to expand...
Click to collapse
So you've done this and it works with the 3G Hotspot?
Sent from my ADR6300 using XDA App
Xxq TZ pxX said:
I am on the new FroYo leak and I just tried this with the included "3G Mobile Hotspot" app and it didnt work. I double checked my DUN NAI, and it is set to [email protected]. I could see and connect to my hotspot, but no web pages would load. Anyone have any ideas?
Click to expand...
Click to collapse
Did you put "yournumber" or did you put YOUR phone number?
Sent from my ADR6300 using XDA App
I have the same problem. I changed the dun NAI as directed. Wireless Tether was broken for me but I'll try copying the .bin file over again.
Sweet!
Just hope we don't get a huge bill at the end of the month.
re
Xxq TZ pxX said:
I am on the new FroYo leak and I just tried this with the included "3G Mobile Hotspot" app and it didnt work. I double checked my DUN NAI, and it is set to [email protected]. I could see and connect to my hotspot, but no web pages would load. Anyone have any ideas?
Click to expand...
Click to collapse
My laptop could not connect to the conn with wpa2 enabled. But with wpa and wep encryption it works great.
Just remember that wep is crap.. i can crack wep in 5 minutes easily.
"for your health"
Plus its fun putting the most revolting ssid name that you can think of.
sprintrjm said:
My laptop could not connect to the conn with wpa2 enabled. But with wpa and wep encryption it works great.
Just remember that wep is crap.. i can crack wep in 5 minutes easily.
"for your health"
Plus its fun putting the most revolting ssid name that you can think of.
Click to expand...
Click to collapse
5 minutes? You're slow Kidding hehe
chris61292 said:
dial ##778, go into edit mode, the password is 000000, once in go to M.IP Default Profile and edit DUN NAI from [email protected] to [email protected]. Then hit menu and press commit modifications. It should then reboot or w.e and your done. Free 3g hotspot app
At least thats how other people have said to do it
Click to expand...
Click to collapse
does this effect any other part of your phone? or does only wifi tether use this?
I did the mod, cranked up 3g hotspot, and connected my Ipod Touch. Worked great, and strangely enough was quite fast. Sweet! (Froyo 2.2)
chris61292 said:
dial ##778, go into edit mode, the password is 000000, once in go to M.IP Default Profile and edit DUN NAI from [email protected] to [email protected]. Then hit menu and press commit modifications. It should then reboot or w.e and your done. Free 3g hotspot app
At least thats how other people have said to do it
Click to expand...
Click to collapse
When I tried this last night I could see and connect to the hot spot, but it wouldn't give me an IP address.
From the instructions above it would appear that I could just remove "DUN" from the profile, commit the changes and then be up and running on VZWs network. Am I doing this correctly?
thanks,
Works for me. Thanks for all the good stuff guys!
need help
i have Droid X and i cat`t find cdma internet settings in my phone
my operator system have
dial number #777
login and password: cdma
but in setting-> wireless&network have only wifi and VPN setting
in Mobile networs only System select
help me, thx
Motorola Droid X
Android 2.2
What exactly are you trying to do?...
Internet settings for cdma? sounds like u need to call ur carrier for this, this has nothing to with your phone.
dr154 said:
What exactly are you trying to do?...
Click to expand...
Click to collapse
i want use internet on my phone. Not wifi, cdma internet
and i do not know how to configure connection
in windows mobile 6.5 very easy data connection -> manage existing connections -> new -> name, dial number, login, password.... finish. But in android i can`t find whis settings
im kind of confused. i just turn on my data connection and go. no settings needed...
sembios said:
i want use internet on my phone. Not wifi, cdma internet
and i do not know how to configure connection
in windows mobile 6.5 very easy data connection -> manage existing connections -> new -> name, dial number, login, password.... finish. But in android i can`t find whis settings
Click to expand...
Click to collapse
that information doesnt exist from my understanding with these types of phones... u either have the internet or you dont, which u should have the internet if ur paying the data package, unless ur bill is past due and some of your services are temporarily suspended...
No, the thing is - I bought Droid X on EBay and now want to use it with different carrier (not Verizon). Phone interface doesn't have any option to exchange settings for built-in EV-DO modem (dialing number, username, password, etc). phones running Android and build by HTC have easy access to modem internet settings.
Help, plz!
I don't think you can use the x on another carrier by my understanding.
Sent from my DROIDX using XDA App
The only other carrier you *might* be able to use it on is one that uses CDMA, so not T-Mobile or AT&T
sembios said:
...in windows mobile 6.5 very easy data connection -> manage existing connections -> new -> name, dial number, login, password.... finish. But in android i can`t find whis settings
Click to expand...
Click to collapse
Connection Manager paradigm doesn't exist on this platform. Provisioning is done OTA when you first set up.
Hello all! I recently won a Sprint Moto X on eBay for the shockingly low price of $130, and I decided to attempt to flash it to Page Plus. So, in order, that others may benefit from this awesomeness, I decided to post a basic guide. One thing to note is that, if you have flashed Sprint phones to Page Plus before, the process is very similar.
DISCLAIMER: This guide comes with no guarantees of any kind. If you lose personal data or service, brick your phone, or lose your arm to gangrene, I am not responsible.
Stuff You Need
A PC running Windows
Motorola Drivers (download here)
SPCUtility APK (download here)
DFS (download here)
QPST (download here)
Page Plus PRL (attached)
10.key file (attached)
Stock, rooted Moto X 4.4.2 firmware (you can try an older version, but I've only tested on this)
How to Do It
First, if you don't have one, get a Page Plus phone number and account. You'll need it for manually programming.
If you have trouble getting Page Plus to accept your ESN (which is the MEID you'll find in Settings > About Phone > Status), try live chat until someone is okay with activating a 4G phone. They will probably warn you that they offer no support for programming 4G phones.
Make sure to Live Chat with Page Plus and ask for your MDN, MIN, and SID. Most likely, your MDN and MIN will be your phone number.
Once everything on Page Plus' end is set up, dial ##DIAG# on your phone. In the screen that appears, click the overflow button and choose Edit. Then set Diag Port to Enable.
Now install the Motorola drivers so you can connect your phone to your PC. This is sometimes a tricky process, and I don't know why. Google is your friend if you have trouble. When successful, you will see this in Device Manager.
Before attempting to program, you need your MSL. Install the SPCUtility APK and use it to get your MSL.
If you haven't already, install DFS. Open the program and click the Ports button in the upper-left corner. Then double-click the Motorola QC Diag Port to select it. (If you don't see this port, the drivers are not properly set up.) Close the Ports window.
Enter your MSL in the SPC box under the Ports button. Then click the SPC send arrow. Your log window should show DEVICE UNLOCKED. (If the log window is not visible, click the Log button in the upper-right.)
(Optional) In the General tab, click Read in the SPC box. Then replace the SPC string with 000000 and click Write. This sets your MSL to all-zeroes, useful for future programming.
In the General tab, click Read in the Config box. It may already read NV_ONLY. If it does not, set it and click Write.
Go under the NAM tab and click Read at the bottom. The fields will populate with your phone's current programming. Now replace the numbers in both MIN A and MIN D fields with your MIN. Fill the MDN and PCS fields with your MDN. Finally, in the Home box, fill in your SID and click Write.
In the PRL box, click Load and select the Page Plus PRL you downloaded. Click Write.
At this point, you may click Reset and your phone should have talk/text. Try taking and sending one of each to verify that everything has gone right so far.
Now go back to DFS and send your SPC again to get back to work. In the Data tab, click Read, and then fill out all of the UID fields and the HDR AN NAI field with [email protected] (the X's being your phone number). In the PPP SIP NAI, use [email protected]. Put "vzw" (sans quotes) in all of the password fields, and make sure the authentication box is checked. Click Write.
Go to the Mobile IP tab and click Read. At this point, I admit that I do not know 100% what I am doing, but that these settings worked for me. Basically, make your settings look like these ones, but input your number where I scribbled out my own. Also, for everything in the Selected Profile Settings box, put it in both the first and second profile selections. After filling each of those out, click Write current profile settings. Then click Write in the left box.
At this point, reset your phone. You might have working 1X after a minute. Irrelevant, because we're about to go for 3G. Close DFS.
Open QPST Configuration (install it if you haven't). Click Add New Port... and select the only available port. Click Okay, then go to Start Client > EFS Explorer. Select your phone and enter your MSL. It will take a minute to read the phone's EFS data.
Once the EFS data is loaded, right click the root directory and click New > Directory. Name the new folder DMU.
Inside the DMU folder, click File > Open and select the 10.key file you downloaded. Verify the target path is /DMU/10.key.
When the file is copied successfully, click Phone > Reset Phone. When the phone reboots, wait a minute or two. You should have 3G!
3G speed test results here
MMS Fix
Download and install 8sms from the Play Store or their website.
If you're using KitKat, be sure to set the new app as your default SMS app.
In the app, go to Settings > MMS Settings.
Now set the following:
MMS Network: Sprint
MMSC: http://mms.vtext.com/servlets/mms?X-VZW-MDN=XXXXXXXXXX (the X's being your phone number)
MMS Proxy: leave blank
MMS Port: 8080 (if that doesn't work, try 80)
MMS over WiFi: Off
Volia! You should have working MMS.
Now, I freely admit that there are numerous places to go wrong here, but this is what worked perfectly for me. If you have trouble, tell me and I'll try to help. Also, check out this thread for general flashing reference. Viper is an expert at these kinds of projects.
Happy flashing!
Can I flash Sprint Moto X to Verizon ? and else does you did it already with success
MrSaba said:
Can I flash Sprint Moto X to Verizon ? and else does you did it already with success
Click to expand...
Click to collapse
Flashing between major, independent carriers is illegal. Legally we can only flash between MNVOs.
but what mean MNVO ? I am not USA citizen I live in Republic Of Georgia
MrSaba said:
but what mean MNVO ? I am not USA citizen I live in Republic Of Georgia
Click to expand...
Click to collapse
Ah, in that case I don't know Georgian laws. Even so, I do not know how to flash to Verizon, or even if it is entirely possible.
pageplus is cdma network only? in georgia its not illegal to flash on other network. I need to make sim unlock for gsm metworks
Sent from my DROID RAZR HD using XDA Premium 4 mobile app
MrSaba said:
pageplus is cdma network only? in georgia its not illegal to flash on other network. I need to make sim unlock for gsm metworks
Sent from my DROID RAZR HD using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes, Page Plus is CDMA only.
Updated with MMS fix.
Nice guidance.. Carry on..:good::good:
When entering ##DIAG# it asks for a passcode tried 000000 it didn't work
Any ideas??
Thanks very much for the post
ac2014 said:
When entering ##DIAG# it asks for a passcode tried 000000 it didn't work
Any ideas??
Thanks very much for the post
Click to expand...
Click to collapse
It wants your MSL/SPC code. Look for the app called SPCUtility.apk in the OP.
I downloaded it from an XDA page by the guy who developed it but I no longer have the URL and don't recall his handle.
It will tell you your subsidy unlock code, at least it did for me on my Moto X and for several other folks with other Android phones.
How do i get the drivers installed properly?
ac2014 said:
How do i get the drivers installed properly?
Click to expand...
Click to collapse
here's how to install the driver
search for this on google it should be the 1st youtube video
"How to Install Motorola QC Diag Driver"
so i got everything working thanks very much
just few things
1) every time restarting the hone it goes to activation any way to remove it ?
2) im getting notification "Mobile IP Registration response error MIP Error 131:mobile node failed authentication" which makes me nurses cause it pops up every few seconds :crying:
any help would be appreciated
thanks in advanced
ac2014 said:
here's how to install the driver
search for this on google it should be the 1st youtube video
"How to Install Motorola QC Diag Driver"
Click to expand...
Click to collapse
Which version of QC Diag Driver you have used ?
DANIEL AMBRUSO said:
Which version of QC Diag Driver you have used ?
Click to expand...
Click to collapse
The latest available. Dono exactly which 1
ac2014 said:
The latest available. Dono exactly which 1
Click to expand...
Click to collapse
Exactly i want to know about your available version..
DANIEL AMBRUSO said:
Exactly i want to know about your available version..
Click to expand...
Click to collapse
Motorola Mobile Drivers 6.3.0
I successfully got talk and text with this but no data connection. Does anyone have data working?
lswiggins said:
I successfully got talk and text with this but no data connection. Does anyone have data working?
Click to expand...
Click to collapse
It did took 3 minutes but showed up
It might be a bit tricky, u have to input in 2 spots. As you can see it pic provided by @Nicene Nerd
Nicene Nerd said:
Basically, make your settings look like these ones, but input your number where I scribbled out my own. Also, for everything in the Selected Profile Settings box, put it in both the first and second profile selections.
Click to expand...
Click to collapse
Did u input the 2nd profile?
Just need someone with an activated Sprint LS993 (LGG6) to test FoxFi 2.19 with Full version key. Just install both FoxFi apks on phone and install PDAnet on Windows 7. Test USB mode and bluetooth if possible. Please make sure to test USB mode with USB cable.
Having problem uploading the PDAnet .rar. Try this https://forum.xda-developers.com/lg-g6/help/pdanet-foxfi-compatibility-nougat-7-0-t3584055
I have an activated ls993 by sprint
enzeden said:
Just need someone with an activated Sprint LS993 (LGG6) to test FoxFi 2.19 with Full version key. Just install both FoxFi apks on phone and install PDAnet on Windows 7. Test USB mode and bluetooth if possible. Please make sure to test USB mode with USB cable.
Having problem uploading the PDAnet .rar. Try this https://forum.xda-developers.com/lg-g6/help/pdanet-foxfi-compatibility-nougat-7-0-t3584055
Click to expand...
Click to collapse
Message me so we can get it done
No Longer Need Someone with an activated Sprint LS993 mind testing FoxFii 2.19 with
UPDATE GOOD NEWS!!!!
Just to let all the Sprint LGG6 owners out there know. FoxFi 2.1.9 does not work with Android 7.0, however, PDAnet 4197 (aka PDAnet+) does, but Sprint blocks access to it in the play store. I have attached the .apk. The FoxFi Key.apk will convert it to a full unlocked version.
Enjoy,
enzeden
enzeden said:
Just need someone with an activated Sprint LS993 (LGG6) to test FoxFi 2.19 with Full version key. Just install both FoxFi apks on phone and install PDAnet on Windows 7. Test USB mode and bluetooth if possible. Please make sure to test USB mode with USB cable.
Having problem uploading the PDAnet .rar. Try this https://forum.xda-developers.com/lg-g6/help/pdanet-foxfi-compatibility-nougat-7-0-t3584055
Click to expand...
Click to collapse
If you guys have you're MSL or Service Code from Sprint then you can enable the native wifi tethering.... ONLY IF YOU HAVE THE MSL!!!
wtharden said:
If you guys have you're MSL or Service Code from Sprint then you can enable the native wifi tethering.... ONLY IF YOU HAVE THE MSL!!!
Click to expand...
Click to collapse
How did you go about unlocking native wifi tethering with MSL code?
I could not add the "Dun" to the apn for it to work even with my MSL code it was grayed out.
PLease! Please! share how you managed it.
Thanks
uacolon said:
How did you go about unlocking native wifi tethering with MSL code?
I could not add the "Dun" to the apn for it to work even with my MSL code it was grayed out.
PLease! Please! share how you managed it.
Thanks
Click to expand...
Click to collapse
I'm not sure if it's a fluke but mines worked like this.... I'm about to post instructions now.
uacolon said:
How did you go about unlocking native wifi tethering with MSL code?
I could not add the "Dun" to the apn for it to work even with my MSL code it was grayed out.
PLease! Please! share how you managed it.
Thanks
Click to expand...
Click to collapse
Before Starting Make Sure You Have A Copy Of Your Internet Settings. (Everything in APN Settings)
Go to the Data Menu by entering ##DATA#
Select the APN Settings & Select Edit (Enter MSL)
Tap Each APN Separately (Select Edit & Enter MSL) & DELETE APNs (By Selecting The 3 Dots To The Right)
**You won't be able to delete ota apn but that's fine.
**Now you should have no internet!!!
Go To Regular Settings Then Select (More, Mobile Networks, Access Point Names) & Add APN Manually. **Adding "default,mms,supl,dun" under APN TYPE
**Put in all the correct settings the first time before saving APN. YOU WON'T BE ABLE TO GO BACK & EDIT APN AFTER IT'S SAVE. (The only way to correct the APN once saving it is to start at step one. Yes starting all over.)
Once You Put The Correct APN Settings In & Save It, LTE or DATA Should Show Up.
TRY TETHERING!!! OH IT WORKS.....?
uacolon said:
How did you go about unlocking native wifi tethering with MSL code?
I could not add the "Dun" to the apn for it to work even with my MSL code it was grayed out.
PLease! Please! share how you managed it.
Thanks
Click to expand...
Click to collapse
Here are my APN Settings..... But I'm On Sprint
wtharden said:
Here are my APN Settings..... But I'm On Sprint
Click to expand...
Click to collapse
Much thanks for this write up wtharden.
i am pretty sure this would have worked flowlesly on my G6, im on sprint as well..unfortunately i do not have the option to add an APN.. not three dot menu..
uacolon said:
Much thanks for this write up wtharden.
i am pretty sure this would have worked flowlesly on my G6, im on sprint as well..unfortunately i do not have the option to add an APN.. not three dot menu..
Click to expand...
Click to collapse
I'm not sure why mines have it.... Have you tried the old method from the G5, do you have debugging on?
uacolon said:
Much thanks for this write up wtharden.
i am pretty sure this would have worked flowlesly on my G6, im on sprint as well..unfortunately i do not have the option to add an APN.. not three dot menu..
Click to expand...
Click to collapse
I don't think it's anything special because it's everywhere... It's crazy if you don't have that option.
I thought i was going MAD..but im not ...see screen shot
I did not know there was a way to do it on the G5.
I only knew methods for G2 G3 ill jump back to the G5 forums and search.
And yes i have all great setting on dev mode ,unknow sources..usb debug..etc
uacolon said:
I thought i was going MAD..but im not ...see screen shot
I did not know there was a way to do it on the G5.
I only knew methods for G2 G3 ill jump back to the G5 forums and search.
And yes i have all great setting on dev mode ,unknow sources..usb debug..etc
Click to expand...
Click to collapse
That's strange, I'm not sure why I have it in mines. I wish I could compare our phones settings.
If it's not too much trouble could you post your system settings..just curious i remeber one time i got and update forced on my phone.
uacolon said:
If it's not too much trouble could you post your system settings..just curious i remeber one time i got and update forced on my phone.
Click to expand...
Click to collapse
Here it is.
wtharden said:
Here it is.
Click to expand...
Click to collapse
Much thanks
i was finally able to get the APN option to show up.
Here is what i did ..
Called sprint and asked to get my Phone UICC unlocked. I explained needed it to be able to use my phone abroad with other carries. (I have business trip in two weeks.)
This request takes two to three business days to get this through their system and your account has to be in good standing.
Then today i did ##72786# which resets provisioning parameters... Now the APN menu is available.
Now that the settings are available to me. I did try your method posetd but got no LTE data after all was said and done.
So i do have a few questions for you if you can still assist.
1. Where/did you get the full APN settings from ..on my phone it will not display it.(mms address ip etc..)
2. on my phone for LTE its using the IMS APN can you share your IMS APN settings with me?
much thanks once again.
uacolon said:
Much thanks
i was finally able to get the APN option to show up.
Here is what i did ..
Called sprint and asked to get my Phone UICC unlocked. I explained needed it to be able to use my phone abroad with other carries. (I have business trip in two weeks.)
This request takes two to three business days to get this through their system and your account has to be in good standing.
Then today i did ##72786# which resets provisioning parameters... Now the APN menu is available.
Now that the settings are available to me. I did try your method posetd but got no LTE data after all was said and done.
So i do have a few questions for you if you can still assist.
1. Where/did you get the full APN settings from ..on my phone it will not display it.(mms address ip etc..)
2. on my phone for LTE its using the IMS APN can you share your IMS APN settings with me?
much thanks once again.
Click to expand...
Click to collapse
I deleted the IMS, the only thing that I kept was ota. And then add the Internet APN manually. Yours might be r.ispsn.... And it's in the ##DATA Menu.... MMSC
wtharden said:
I deleted the IMS, the only thing that I kept was ota. And then add the Internet APN manually. Yours might be r.ispsn.... And it's in the ##DATA Menu.... MMSC
Click to expand...
Click to collapse
Awesome
Much thanks once more..
I am using the r.ispsn... good call.
Now works...
uacolon said:
Awesome
Much thanks once more..
I am using the r.ispsn... good call.
Now works...
Click to expand...
Click to collapse
Just glad I could help... Had no ideal that the phone had to be UICC unlocked.... I guess they did that when I brought the phone. :good:
wtharden said:
Just glad I could help... Had no ideal that the phone had to be UICC unlocked.... I guess they did that when I brought the phone. :good:
Click to expand...
Click to collapse
Thanks Again,
last question.. what app are you using to depict your LTE signal?
Top left of your screen shots?