How do I tether on Sprint plan without getting charged? - Touch CDMA General

In the quest for free tethering, I have got many different sources telling me many different techniques. Below are some of these techinques:
***IMPORTANT*** - Before you modify registry settings, make a backup using SPB backup or Sprite Backup. I tried to tether before changing the registry, and my internet got locked out permanently. I had to hard reset my phone because I didn't have a backup. If this happens to you (it will say your vision username and pass are incorrect, no matter what you do) then you can restore your backup and try again. You shouldn't have this issue if you change the registry keys and connect first before attempting to use the internet sharing app.
Here's the registry keys you need to change to hide that you're tethering:
get a registry editor like total commander, and go into
HKLM --> Software --> OEM --> Wmodem
Set every key in there (I think there's 4 IIRC) to zero.
This will disable tethering detection,and then you can actually go into settings --> connections --> Manage Existing Connections (under Sprint),and then change your default connection method to "Phone as Modem" instead of Sprint PCS.
after changing the registry keys and connection settings, you will want to soft reset, and then when your phone boots back up, you need to connect to EVDO by opening internet explorer. Once you are connected, you can close internet explorer, open the internet sharing app, change the connection from sprint pcs to phone as modem and then click 'connect' to start your tethering. It will do the rest by itself.
As a note, using the PAM as the default connection setting will give you a boost in download speeds as well, from what I've seen and what others have reported. Happy tethering!
________________________________________________________________________________________________________________________
Now that I look at it, there are three keys to modify... CheckProfile, Multi-NAI, and WModemDUN.
I am thinking that the CheckProfile key allows the phone to check your profile on sprint to see if you have the PAM service.
I think the WModemDUN is disabled by default anyway, and am not sure what it does. But I do know that I can connect all day now using Phone as Modem and tether with no issues and no additional programs to install
______________________________________________________
you need PHM Registry editor found here: http://www.phm.lu/Products/PocketPC/RegEdit/
now navigate to:
HKEY_LOCAL_MACHINE\SOFTWARE\OEM\WModem
and set all the values to 0
ok, so if you disable all 3 then sprint wont see it as tethering then?
Click to expand...
Click to collapse
Which of these should I use, If any? Help me!

bump! anyone?

if the new rom then use the cab added just unzip it then install it to ur phone...http://forum.ppcgeeks.com/showthread.php?t=30265 here is the link I got if from it u want to read up on it.
-edit-
I forgot to say wait a few mins then do a reset for the settings to take affect.

all you have to do is load the sprint test rom and go into registry to delete the key that says ipsext.dll and tether away all day all long. umm... that is until they see your data usage amounts and cut your account off since there going to start limiting now.....

udontknowmehomi said:
all you have to do is load the sprint test rom and go into registry to delete the key that says ipsext.dll and tether away all day all long. umm... that is until they see your data usage amounts and cut your account off since there going to start limiting now.....
Click to expand...
Click to collapse
would you please elaborate on this, i.e. have you read an article somewhere?...?

well yea theres lots of posts on how to do this already....so im not taking any credit but heres what I did. I used the cokemans unlocker and loaded the alltel rom which I didnt like. So then I flashed the sprint test rom, after I did that the internet sharing under the com manager was greyed out or disabled. To fix this I loaded phm registry editor and went here...
HKEY_LOCAL_MACHINE/Comm/InternetSharing and deleted the value that said ipsext.dll and powered down the vogue. After booting back up my internet connection sharing was now working and not greyed out anymore. Ive seen other posts where the value they deleted was something else besides ipsext.dll but thats what it was on mine anyway. The data capping you can google and see there now capping at 5gig which is alot unless your using it for your only internet.

udontknowmehomi said:
well yea theres lots of posts on how to do this already....so im not taking any credit but heres what I did. I used the cokemans unlocker and loaded the alltel rom which I didnt like. So then I flashed the sprint test rom, after I did that the internet sharing under the com manager was greyed out or disabled. To fix this I loaded phm registry editor and went here...
HKEY_LOCAL_MACHINE/Comm/InternetSharing and deleted the value that said ipsext.dll and powered down the vogue. After booting back up my internet connection sharing was now working and not greyed out anymore. Ive seen other posts where the value they deleted was something else besides ipsext.dll but thats what it was on mine anyway. The data capping you can google and see there now capping at 5gig which is alot unless your using it for your only internet.
Click to expand...
Click to collapse
I have a Sprint Vogue (HTC Touch) and followed the registry path you said and found the value isext.dll not ipsext.dll. Do you think these are the same? After deleting it, the "use phone as modem" showed up in Internet Sharing.
BTW, thanks for the info!

If you go to PPCHaven, register, and go to Premium Content, DHarvey has posted a .cab file for fixing this.

crazy treo 800
I remove the dll in registry setting in internet sharing.
I can't receive phone calls, my internet hangs in 1x mode
and drop off evdo mode even having 5 bars.

anybody
Anybody know how I can fix this without adding back the registry setting.
I still want to tether

I have an mp6900sp vogu100 by sprint, and I can tether (with no consequence so far...) by doing the following:
1. Go to your comm mgr.
2. Turn on internet sharing.
Now comes the tricky part... If you try to connect, it will not let you unless you have a phone as modem plan. So...
3. Go to Menu (bottom right) and select 'Connection Settings'.
4. Select the 'Advanced' tab.
5. press the 'Select Networks' button.
6. Select 'My Isp" for the second drop down menu (private network).
7. Press the 'Edit' button under the second drop down menu (private network).
8. Press and hold down your stylus on the 'Phone as Modem' name until the pop-up menu appears, and select connect.
At this point, you should see a window appear which states the phone is dialing to make connection. If all goes well, it should connect, and all you have to do is go back to the first screen after turning on the internet sharing switch(by pressing 'OK' 3 times I think), and select 'USB' for PC Connection and press the 'connect' button at the bottom lefthand side of the screen. Hook up your usb cable at this time and you should now be tethered to your computer.
I believe you need to have active sync installed in order to create the actual network connection on 'Windows'. Linux machines should connect automatically using the rndis driver.
hope this helps

Related

Turn GPRS OFF!

Hello,
How do I turn GPRS OFF On an Xda Exec?
I have a successful WiFi connection set up to my Works Netork and I want to browse the internet via that. However, GPRS just will not GO AWAY & keeps on insisting that IT rather what I WANT is the route to the internet.
Hence I want it gone, nada, no more.
I can safely say that I will NEVER browse the net using GPRS or poxy WAP sites - excessively expensive crapola!
Thanks in advance,
Andy
i have same problem , plz help
sakinah said:
i have same problem , plz help
Click to expand...
Click to collapse
and me! been searching but no luck yet!
not sure about 2005 but with 2003 i can just choose which connection i wanna use in connection->advanced
If you never going to use GPRS, just delete the settings:
Settings->Connections->Connections, under My ISP choose 'Manage existing connections', then long click on the GPRS setting (not sure what the name in your case will be, but it is probably the only one there) then choose delete.
You are now safe from GPRS charges.
levenum said:
If you never going to use GPRS, just delete the settings:
Settings->Connections->Connections, under My ISP choose 'Manage existing connections', then long click on the GPRS setting (not sure what the name in your case will be, but it is probably the only one there) then choose delete.
You are now safe from GPRS charges.
Click to expand...
Click to collapse
there is not option to delete?
It is possible that on your phone the connection is set up under 'My work network', try checking there. Somewhere there should be a connection with your GPRS settings and you should be able to delete it.
i must be going blind, there is no option to delete, just edit or add
You are not going blind.
On the dialog it self there are two buttons 'Edit' and 'New'.
But if you tap and hold the connection it self (see little circles) you get a pop-up menu saying 'Delete' and 'Connect'.
It works on my Jamin, and it should work for you.
levenum said:
You are not going blind.
On the dialog it self there are two buttons 'Edit' and 'New'.
But if you tap and hold the connection it self (see little circles) you get a pop-up menu saying 'Delete' and 'Connect'.
It works on my Jamin, and it should work for you.
Click to expand...
Click to collapse
aaahhh now youre talking! ok i'll give that a go ta
oh bugger, ok thats worked BUT i thinki deleted my phone settings as now it cant find the network for calls, pratt, anyone got the setting so i can ut them back in, i dint reallt want to reset it after i got everything else working!
got it working now! ta
Same problem here, however I would like to use GPRS occasionally, so do not really want to delete the setting.
Example whilst at home, I want to use wi-fi, on the road GPRS.
Is there any tools that can turn GPRS on and off ?
Just press the E or G icon on the top bar and you should have the option to disconnect. That is, if you've enabled GPRS Disconnect in your registry. Works like a charm. Whenever I want to connect via WiFi, I just disconnect GPRS and fire up WiFi...

T-Mobile MMS/GPRS Question

For some reason I've done this a thousand times but its not working this time. I'm pretty sure I've set this up right but its not working. 1st question: Is it possible to send MMS messages through 'internet2.voicestream.com'? It works through 'wap.voicestream.com', but then GPRS/EDGE wont work through that, it will only work through 'internet2.voicestream.com'. In addition to that, the auto switch isn't working for me. The MMS is trying to use 'internet2.voicestream.com' and the GPRS/EDGE is trying to use 'wap.voicestream.com'. 2nd question: Is there a way to set this up MANUALLY, without a provisioning cab? I hate those things, they add in other customizations that I don't like or want.
hiimcliff said:
For some reason I've done this a thousand times but its not working this time. I'm pretty sure I've set this up right but its not working. 1st question: Is it possible to send MMS messages through 'internet2.voicestream.com'? It works through 'wap.voicestream.com', but then GPRS/EDGE wont work through that, it will only work through 'internet2.voicestream.com'. In addition to that, the auto switch isn't working for me. The MMS is trying to use 'internet2.voicestream.com' and the GPRS/EDGE is trying to use 'wap.voicestream.com'. 2nd question: Is there a way to set this up MANUALLY, without a provisioning cab? I hate those things, they add in other customizations that I don't like or want.
Click to expand...
Click to collapse
I've been using the T-mo cab since day 5 (days 1-4 I was racking my brain trying to get MMS to work) and it configures the connections as follows:
-Use internet2... under "My ISP" (or "T-Mobile US" in your case)
-Use wap... under "My Work Network" and change the "Connect via:" setting under MMS settings appropriately. Also, proxy settings are enabled for this connection ("This network connects...." and "This network uses..." both checked, proxy server blank, and under advanced settings: WAP server is: 216.155.165.50:9201)
-Network management (under the advanced tab of connections) => "My ISP" in the top, and "My Work Network" in the bottom.
The autopick within a connection never seemed to work for me, but the above works fine. In order to send an MMS, you must first disconnect from your GPRS/EDGE connection (alternatively, MMS will be the first to connect when recovering from a dropped data connection).
Hope that helps, if not just run the provisioning cab...hell-of-a-lot easier and I don't see what "other" things are added, all it does is set up the network connections and all the settings, nothing more, nothing less. Filename of the one I've been using for quite some time is T-Mobile_USA_Internet_UNI_SA_V2.0.CAB
glhs509 said:
I've been using the T-mo cab since day 5 (days 1-4 I was racking my brain trying to get MMS to work) and it configures the connections as follows:
-Use internet2... under "My ISP" (or "T-Mobile US" in your case)
-Use wap... under "My Work Network" and change the "Connect via:" setting under MMS settings appropriately. Also, proxy settings are enabled for this connection ("This network connects...." and "This network uses..." both checked, proxy server blank, and under advanced settings: WAP server is: 216.155.165.50:9201)
-Network management (under the advanced tab of connections) => "My ISP" in the top, and "My Work Network" in the bottom.
The autopick within a connection never seemed to work for me, but the above works fine. In order to send an MMS, you must first disconnect from your GPRS/EDGE connection (alternatively, MMS will be the first to connect when recovering from a dropped data connection).
Hope that helps, if not just run the provisioning cab...hell-of-a-lot easier and I don't see what "other" things are added, all it does is set up the network connections and all the settings, nothing more, nothing less. Filename of the one I've been using for quite some time is T-Mobile_USA_Internet_UNI_SA_V2.0.CAB
Click to expand...
Click to collapse
on the contrary. when you open the cab you find all sorts of new favorites, changed home page, setup.dlls, and other customizing crap.
i've tried your way in the past. it does work. but i also know there is a way to get the auto pick to work. it has worked in the past. i just cant figure it out again.
hiimcliff said:
on the contrary. when you open the cab you find all sorts of new favorites, changed home page, setup.dlls, and other customizing crap.
i've tried your way in the past. it does work. but i also know there is a way to get the auto pick to work. it has worked in the past. i just cant figure it out again.
Click to expand...
Click to collapse
Dunno which CAB you've been looking at, but the one I use has 4 files: an XML file for network settings, registry settings file (for MMS), and Check/Recheck executables for installation. No changes to favs, home page, etc...
The is the same one I've been using since grabbing from I-Mate's website back in Oct. '05.
glhs509 said:
Dunno which CAB you've been looking at, but the one I use has 4 files: an XML file for network settings, registry settings file (for MMS), and Check/Recheck executables for installation. No changes to favs, home page, etc...
The is the same one I've been using since grabbing from I-Mate's website back in Oct. '05.
Click to expand...
Click to collapse
well the ones from tmobile's extended rom do. and quite simply put, i dont want to use a provisioning cab.
now the question at hand is... has anyone gotten the auto pick to work with manual configuration and not with provisioning cabs
Odd wap.voicestream.com works fine for me for my edge connection. Makes it real easy to send an MMS no dropping connections or anything. I've used the above mention method using two different settings before works fine but not the autopick method.

Removing GPRS on 8525?

Is there an option on the 8525 to disable GPRS completely? I have MediaNet blocked on my account, just to be on the safe side. Being overly cautious, I even changed the settings for GPRS from the AT&T defaults by using fake letters for the connections.
With that said, it is annoying that when I lose connection with the Wi-Fi, it tells me the GPRS failed. It's like, hello -- yea I know, I don't want it on my device!
I have used Wi-Fi successfully to find websites at home, work, and a local restaurant. I even used it to send a yahoo IM without needing MediaNet, which uses data or even messaging. The next thing that needs to be addressed is avoiding the GPRS messages.
Oh yea, when IE opens, I would like to get rid of the AT&T screen as the default. I tried to delete the page, but it wouldn't let me do so! Is there a way to change the "homepage"?
Thanks for all future help!
Yes there is. Go to start>settings>connections> connections> and edit everything you see there and delete it (tap and hold). I have this done because i also don't have a data plan.
kareem9nba said:
Yes there is. Go to start>settings>connections> connections> and edit everything you see there and delete it (tap and hold). I have this done because i also don't have a data plan.
Click to expand...
Click to collapse
That was a temporary fix. It doesn't say GPRS error anymore, but now it says:
"
Error S7019: Cannot connect to server. Please
check your data
connection and try again.
"
I've only tried it on "Xpress mail" so far, it may be only on that program. Does Xpress mail only work on the AT&T MediaNet connection?
If anyone is still reading this, I recently removed both the AT&T and Cingular Xpress Mail programs from the device. Haven't checked other programs to see if it's still trying to access the AT&T internal internet. However, that was the program that created the previous error posted.

Deactivate data connection on HD2

On my Diamond, I had a handy little application called NoData which deactivated data connections so that I didn't get charged for using mobile internet by mistake.
Is there any way to do the same thing on the HD2?
Thx.
I am also looking for an app that can do this.
I'm off abroad in a couple of weeks and I am already having nightmares about the bill I may have when I return if I can't find a way to deactivate the data!
pkchips said:
On my Diamond, I had a handy little application called NoData which deactivated data connections so that I didn't get charged for using mobile internet by mistake.
Is there any way to do the same thing on the HD2?
Thx.
Click to expand...
Click to collapse
Just use the same app
Grtz,
Degake
there is a app out there called...................nodata
oh, are you sure it works on the HD2?
nodata works fine but i use bsb tweaks to disable data connections manually before crossing the border so i can enable it just in case
Since I have no data plan with my carrier i disable connections not referring to WIFI alltogether, I just go to Settings, connections, menu, connections, advanced, select network, and put "work network" (or something, I have it in italian) to both.
pkchips said:
On my Diamond, I had a handy little application called NoData which deactivated data connections so that I didn't get charged for using mobile internet by mistake.
Is there any way to do the same thing on the HD2?
Thx.
Click to expand...
Click to collapse
there is a vey simple way to deactivate the data connection: long press the on/off key and you will get a little menu: one of the menu items is deactivate data connection. Press it and it's done.
kuzibri said:
there is a vey simple way to deactivate the data connection: long press the on/off key and you will get a little menu: one of the menu items is deactivate data connection. Press it and it's done.
Click to expand...
Click to collapse
That terminates it, but it doesn't stop it coming back on when an app tries to use it.
Is there a reason that no-one has suggested airplane mode?
no cab needed, the answer is on the HTC site:
How do I disable my 3G/GPRS Data Connection?
Follow the steps below to ensure that your phone will never connect to a GPRS/3G Data Connection.
1. Go to Start > Settings > Menu > All Settings > Connections > Connections
2. Tap Add a new modem connection > then under Select a modem, select Celluar Line (GPRS) > Name the Connection "Offline" >Tap Next.
3. In the Access point name text box input "Offline" and tap Next.
4. On the next page tap Finish.
5. On the second Connections Menu, tap Manage existing connections and select "Offline" then click OK.
Re-enable the data connection if you want to connect to the internet via 3g/Edge.
1. From the home screen, slide to the Settings tab, Wireless Controls > Data Connection.
2. Select your Country and Operator
3. Tap OK.
4. On the subsequent screen, tap Yes.
The phone will automatically configure itself with the appropriate settings.
Note: When disabling the connection in this way, your phone may report errors when trying to connect to "Offline." The error is caused by the phone being unable to connect to a data source due to the settings, and is normal.
traianescu said:
no cab needed, the answer is on the HTC site:
How do I disable my 3G/GPRS Data Connection?
Follow the steps below to ensure that your phone will never connect to a GPRS/3G Data Connection.
1. Go to Start > Settings > Menu > All Settings > Connections > Connections
2. Tap Add a new modem connection > then under Select a modem, select Celluar Line (GPRS) > Name the Connection "Offline" >Tap Next.
3. In the Access point name text box input "Offline" and tap Next.
4. On the next page tap Finish.
5. On the second Connections Menu, tap Manage existing connections and select "Offline" then click OK.
Re-enable the data connection if you want to connect to the internet via 3g/Edge.
1. From the home screen, slide to the Settings tab, Wireless Controls > Data Connection.
2. Select your Country and Operator
3. Tap OK.
4. On the subsequent screen, tap Yes.
The phone will automatically configure itself with the appropriate settings.
Note: When disabling the connection in this way, your phone may report errors when trying to connect to "Offline." The error is caused by the phone being unable to connect to a data source due to the settings, and is normal.
Click to expand...
Click to collapse
that's what bsb tweaks does, but with one click.
d3l1 said:
that's what bsb tweaks does, but with one click.
Click to expand...
Click to collapse
in case you dont feel like installing bsb tweaks, get nodata here
http://www.modaco.com/content/pocket-pc-software/246171/new-free-utility-nodata/
This is what i want to know. How can we auto disconnect data connection after certain period of time. For example if i set up my device to update weather every hour using EDGE, it wont disconnect automatically but i want it to auto disconnect once the weather is updated regardless of i notice it or not. How do we achieve that?
Hello, I have installed the modaco no data app and it works a treat.
yusufjee said:
This is what i want to know. How can we auto disconnect data connection after certain period of time. For example if i set up my device to update weather every hour using EDGE, it wont disconnect automatically but i want it to auto disconnect once the weather is updated regardless of i notice it or not. How do we achieve that?
Click to expand...
Click to collapse
Why not give this a try? http://forum.xda-developers.com/showthread.php?t=286844&highlight=bandswitch
Thought i'll post a qn here instead of starting a new thread:
Is there any way to allow data connection for just one application in hd2? disabling all others?
I want just IM+ to have data connection but not others like weather update,stock update etc...
any ideas friends?
An application having the same functionality of the famous MoDaCo Nodata but with Manila touch screen interface!!
http://www.redfrogfish.com/data-controller/
sevoflurane said:
An application having the same functionality of the famous MoDaCo Nodata but with Manila touch screen interface!!
http://www.redfrogfish.com/data-controller/
Click to expand...
Click to collapse
Thx...but its only showing 3 connections:mobile TV,MyWorld and MMS.
IM+ is not there although its running.
disabled data but now cant connect to wifi
Hi,
I've disabled my data connection using the HTC mehtod but now when I've connected to wifi, I keep on getting an error message say page cannot be displayed and there is a problem with my connection?
Can someone please tell me if I've done something wrong? and if this is suppose to happen?
Thanks,

[Q] Changing the default network connection

I want to automatically select the default network to which the device connects
(the first combo in Settings->WirelessControls->menu->Connections->Advanced->SelectNetworks -
See attached image)
My problem is as follows -
When I set up the connection to the operator -
it sets the default network to be <<3G Portal>>
I want to automatically change it to <<Internet 3G>>
(Or in the worst case -
Automatically delete the <<3G Portal>> -
making the <<Internet 3G>> the only available option -
which will force it to be default)
Does anyone know how to do this ?
(Even if some Cpp/C# code is needed - does anyone know the API ?)
Thanks
Not a lot of sense there
Looking at the screen print
The phone is set up to access the web FIRST via the 3G portal (every phone needs a portal to get online).
The second option looks to me to be a WIFI connection. Wifi always take priority over gprs/3g/hspa
so unless you can make a bit more clear what your looking for......................
http://www.filesaveas.com/gprs.html
Of course, if you mean a different web access point get the APN settings and manualy add then from the settings menu - wireless and networks access point names - press the menu button - add apn
As I understand your Q, you wanna auto set the default network without having to manually change it everytime you hard reset / change roms?
Here's what I do for such things.
Get ceregistry editor, connect to your phone, export the registry to file, then, on the phone, change the default access point to the one you would rather it was, (possibly reboot phone here to be sure the registry has changed the default apn,) back into ceregistry editor, compare current registry to the snapshot, figure out which key changed, and to what value, then provision that reg key (via a cab, or provxml,) whenever you hard reset, after the network has been set up. (I have a cab with dozens of tweaks in it,you can just keep adding to it)
johnerz said:
Not a lot of sense there
Looking at the screen print
The phone is set up to access the web FIRST via the 3G portal (every phone needs a portal to get online).
The second option looks to me to be a WIFI connection. Wifi always take priority over gprs/3g/hspa
so unless you can make a bit more clear what your looking for......................
http://www.filesaveas.com/gprs.html
Of course, if you mean a different web access point get the APN settings and manualy add then from the settings menu - wireless and networks access point names - press the menu button - add apn
Click to expand...
Click to collapse
Thanks for the reply.
Both connections are over the Cellular network.
The first one (3G Portal) is set up by the operator to go via some proxies and stuff, which block certain services/sites as they are not stored on this proxy.
The Second one is "unfiltered" internet connection over the Cellular network.
Whenever the network is detected and set up, the settings are automaticelly set to go via the "proxied" connection.
I want to change it to work over the unfiltered connection.
I would like to know the registry keys or any other place this information is kept, so I could automatically change it.
I tried searching the registry for these values but could not get to a definite conclusion about where exactly the "default connection" is stored, or if it is stored in the registry altogether.
(If it is stored in the registry - I do NOT want a complete registry import/export - just the relevant keys)
Many thanks in advance.
Yes it is stored in the reg, but it stores an ID for each connection which is different for everyone, hence the method I suggested which would reveal both the key and the ID, I wasn't suggesting you import a whole registry, simply make a cab of just the one key. It would take about 10 mins to do, but I'm not running winmo so can't lookup the key for you.
Som30ne said:
Thanks for the reply.
Both connections are over the Cellular network.
The first one (3G Portal) is set up by the operator to go via some proxies and stuff, which block certain services/sites as they are not stored on this proxy.
The Second one is "unfiltered" internet connection over the Cellular network.
Whenever the network is detected and set up, the settings are automaticelly set to go via the "proxied" connection.
I want to change it to work over the unfiltered connection.
I would like to know the registry keys or any other place this information is kept, so I could automatically change it.
I tried searching the registry for these values but could not get to a definite conclusion about where exactly the "default connection" is stored, or if it is stored in the registry altogether.
(If it is stored in the registry - I do NOT want a complete registry import/export - just the relevant keys)
Many thanks in advance.
Click to expand...
Click to collapse
Try using Data Controller by Red Frogfish. With this app, you can turn on and off all of your different connections indvidually.
Since, I have T-Mobile, I have the following connections:
T-Mobile Data
T-Mobile MMS
T-Mobile Internet
And, Data Controller lets turn each on or off as needed/wanted.
Rob
samsamuel said:
Yes it is stored in the reg, but it stores an ID for each connection which is different for everyone, hence the method I suggested which would reveal both the key and the ID, I wasn't suggesting you import a whole registry, simply make a cab of just the one key. It would take about 10 mins to do, but I'm not running winmo so can't lookup the key for you.
Click to expand...
Click to collapse
Ok, thanks.
I will try this method.

Categories

Resources