anybody know what the two contacts under the case are for?
not the ones for the antenna
maybe test points or restore feature
b_atman said:
anybody know what the two contacts under the case are for?
not the ones for the antenna
maybe test points or restore feature
Click to expand...
Click to collapse
Antenna..Your phone will lose service without the back cover on.. oops never mind
Related
Today the sound on my phone has stopped completely. Works through the headphones and bluetooth but nothing through the speakers and the mic doesn't work. Tired rebooting, hard resetting etc to no avail.
Does anyone know if this is fixable please?
--update--
Just threw the phone to the ground several times in sheer frustration and the sound is back perfectly. I'd still like to understand what caused it for future reference in case it happens again. thanks.
there is a switch in earphone jack,try using some kind of contact spray,there is some oxydation in it
sloba said:
there is a switch in earphone jack,try using some kind of contact spray,there is some oxydation in it
Click to expand...
Click to collapse
Sorry, I don't know what contact spray is. Does it have a brand name and where do you get it, how do you use it and do I need to take my phone apart? Yes, the problem's back. Thanks
littld said:
Sorry, I don't know what contact spray is. Does it have a brand name and where do you get it, how do you use it and do I need to take my phone apart? Yes, the problem's back. Thanks
Click to expand...
Click to collapse
http://www.canford.co.uk/commerce/item_55-101_2004271.aspx
Hi there,
Does anyone have a spare vibration unit/module/thingy that is inside the hermes? Or know where i could get one?
If anyone has a trashed Hermes with it intact i would be willing to take it off your hands
Cheers
It seems that there are not so many variants of those devices.
I also dropped my Hermes leading the vibration alarm to malfunction.
I extracted a spare one from an old Nokia I had. So maybe you will find one in an old phone as well.
Good luck!
Dropping the Hermes is most unlikely to break the vibrator motor. What happens is that the two spring contacts bend a little and lose contact with the m/board. All you have to do is bend the contacts out a little and all will work again. A simple fix and only requires the back casing to be removed.
Mike
mikechannon said:
Dropping the Hermes is most unlikely to break the vibrator motor. What happens is that the two spring contacts bend a little and lose contact with the m/board. All you have to do is bend the contacts out a little and all will work again. A simple fix and only requires the back casing to be removed.
Mike
Click to expand...
Click to collapse
My contacts were allright.
The problem was, that the unbalanced mass deformed the axis of the vibration alarm, when it hit the ground.
the_dipe said:
My contacts were allright.
The problem was, that the unbalanced mass deformed the axis of the vibration alarm, when it hit the ground.
Click to expand...
Click to collapse
Ah ok - must have been a big hit that it took.
Mike
Wow, You sure you didn't throw it? LOL
Thanks for the replies. I might gut a few old phones when i get home and see if i can find one.
the_dipe said:
It seems that there are not so many variants of those devices.
I also dropped my Hermes leading the vibration alarm to malfunction.
I extracted a spare one from an old Nokia I had. So maybe you will find one in an old phone as well.
Good luck!
Click to expand...
Click to collapse
Do you know what version of nokia it was? I tried a few and thet didnt fit
I was hoping someone might be able to give me an idea if my idea would be possible. Basically, I want to take this Case and this Qi Reciever and be able to use them together.
The question I have is this: I see the case has 2 contacts that obviously match up with the phone. Could I use a piece of copper to make both the case and receiver make contact with the points on the phone? Or would this render either the Qi Charging or case to not function?
Thanks in advance!
toonhead85
toonhead85 said:
I was hoping someone might be able to give me an idea if my idea would be possible. Basically, I want to take this Case and this Qi Reciever and be able to use them together.
The question I have is this: I see the case has 2 contacts that obviously match up with the phone. Could I use a piece of copper to make both the case and receiver make contact with the points on the phone? Or would this render either the Qi Charging or case to not function?
Thanks in advance!
toonhead85
Click to expand...
Click to collapse
You can better ask your question here : http://forum.xda-developers.com/showthread.php?t=2438168
After screen replacement gps had stopped working.
First I thought it's a software issue so I flashed stock firmware,and still nothing.
I would like to know where the gps chip is located, and how can I fix it...
TIA
help plz?
shaiws said:
help plz?
Click to expand...
Click to collapse
Did you find more information about the GPS?
maybe you should check GPS antenna contaco on the top left corner (viewing the phone with screen down) put it off the back cover and see if the pins are making contact with the antenna on the back cover or not
Elendil_23 said:
Did you find more information about the GPS?
Click to expand...
Click to collapse
Yep..
After the screen replacement somehow the anthena of the GPS , wasn't fully connected to the motherboard, so I had to make soldering between them.
That's all.
Hello, when I play landscape games (eg. class of clans) and cover the top of the phone WiFi disconnect immediately and Sim 1,2 received signal got weaker even if I am 30 cm from the router, is it a problem with only my phone, or all other Zuk phones have this death grab
Sent from my Z1 using XDA Free mobile app
General hardware issue (on all Z1), sorry but there's nothing to do about it :/
For me it's a drop yes but no disconnect!
At the top of the device the 2 black lines is the wifi antenna and at the bottom the other 2 black lines is for gsm singal/3g/4g internet. If i turn the phone upside down and rotate the screen 180 i have better 3g/4g signal for web broswing.
Is there any way to solve this issue? Like do something with the internals (reposition something?). Or is the only way of fixing this replacing the hardware?
MrWhite98 said:
Is there any way to solve this issue? Like do something with the internals (reposition something?). Or is the only way of fixing this replacing the hardware?
Click to expand...
Click to collapse
You hold it wrong! [antenna gate]
strongst said:
You hold it wrong! [antenna gate]
Click to expand...
Click to collapse
Well, it's pretty annoying that I can't use my phone in landscape...
Is there any way to fix this?
MrWhite98 said:
Well, it's pretty annoying that I can't use my phone in landscape...
Is there any way to fix this?
Click to expand...
Click to collapse
No way to fix it on your zuk, only as I mentioned.
strongst said:
No way to fix it on your zuk, only as I mentioned.
Click to expand...
Click to collapse
Do you happen to know what's the issue? Is it the wifi antenna? (Which is the metal frame?)
MrWhite98 said:
Do you happen to know what's the issue? Is it the wifi antenna? (Which is the metal frame?)
Click to expand...
Click to collapse
Why you ask me instead of reading the whole thread. It's already been answered and, as I already mentioned, the same problem as "antenna gate". It's a design problem.