When the screen is off and a call comes in, I get the "swipe down to answer" thing. You can press the volume buttons to mute the ring. Is there any way to just ignore the call and send it to voicemail?
Basically you just "swipe up" to do that
Related
I use the feature in Voice Command to announce incomming callers so I know who is calling me without looking at my phone. I have set my ringers to none, so all I hear is the name of the person who is calling. However, for some reason, Voice Command seems to ignore the system volume, and still works when I have the phone set to mute.
Does anyone know of away to force Voice Command to adhere to the system volume so my phone does not go off in class or when i am at work. It doesn't happen all the time, but I know when pressing the voice command button even when the phone is mutted, it will unmute the phone and still sound the beep and confirm your commands, then put the phone back on mute. It might be a bug that exists because of this feature, but if there is anyway i can disable it, that would be great! I don't mind having to turn my volume up when using voice command to here the command confirmations, becase having the incomming callers not going off randomly is more important.
Thanks!!!
This is what I do
Go to settings, then click on Voice Command Settings. Highlight the word 'Phone', then press options. Uncheck the box that says 'announce incoming calls'. As far as I know, this is the only way to make the voice silent when a call is recieved.
Thanks....I was hoping there was a way to do this without having to change the settings everytime I have class, but I guess not. I think its just a bug anyway because it only happens sometimes. Guess I'll have to go back to good ol' ringtones....
How do you turn the ringer off, by turning the volume all the way down with the volume slider? By clicking the speaker and then clicking off?
I hold the comm button until it goes into vibrate mode then I use the volume slider to go down to off and VC has never announced the calls when the ringer is off.
is it possible to mute the phone when it's ringing? it's qtek s200...
Sure. Use volume slider to silence the phone while it's ringing.
press the red button
wmu said:
Sure. Use volume slider to silence the phone while it's ringing.
Click to expand...
Click to collapse
is there any only one button to do it? just silence?
You want the phone to continue ringing but just silence it?
Because when you get a call in the bottom there is "answer" and "ignore". Then again if you press ignore the one calling is directed to voicemail or just hung up.
As far as I know thats the only way to immediately mute a phonecall, just press ignore.
And otherwise just use the volume slider when someone is calling. Or put the phone on vibrate when you need silence (which is also volume slider all the way down, or put it on vibrate via the com-manager).
thanks. you mean only way to silence it using volume slider when want to continue ringing. i don't want to ignore calling. the caller must be think i didn't hear the ringing...
hehe lol
Perhaps an extra program on the device would work. Inesoft Addressbook might support it.
Have it here somewhere, can check later today if it indeed has a mute button.
Just to say it more clearly: If you move the volume slider one time in any direction, the phone will mute imediately!
I think this was not understood correctly before - this is the one-key-solution you wanted, isnt it?
thanks... it works!!!
I have Dutty's HG R9 on my TD2, and using TD Tools 3 I've switched off the HTC Phone Dialer Canvas.
I do have the "mute ring on phone facedown" option enabled, but it doesn't seem to take effect.
When my phone is locked and I receive a call, I get a green accept slider and a red ignore slider. The ignore slider does the same thing as the End/hangup key - sends the call to voicemail. I don't see a way to simply silence the ringer without taking any action regarding the incoming call itself.
When my phone is not locked and I receive a call, I get a popup from the bottom of the screen, in black & white, with an answer button and a hangup button. Pressing the hangup button does the same thing as the End/hangup key - sends the call to voicemail. I don't see a way to simply silence the ringer without taking any action regarding the incoming call itself.
How, using the basic WM6.5 phone-is-ringing software (not sure if this is the Dialer? anyway...) with the HTC Phone Dialer canvas switched off by TD Tools 3, can I mute an incoming call withOUT rejecting / sending it to voicemail?
Thanks!
Eliminate "Print via Bluetooth" menu option?
I have Dutty's HG R9 on my TD2. I would like to eliminate the Print via Bluetooth menu option. How do I turn that off?
Thanks,
Jay
Prevent "the answering modem has disconnected" pop-up entirely?
I have Dutty's HG R9 on my TD2. Each time I restart the device, before it asks me for my device unlock password and my SIM unlock PIN, I get the annoying "The answering modem has disconnected" pop-up.
Of course the answering modem has disconnected - the phone is still off!
How do I disable this pop-up, at least so that I don't see it when the phone is actually off (and the software shouldn't be trying to make a data connection through the phone then anyway)?
Or if that fine grain of control isn't possible, how do I disable the message completely at all times?
Thanks,
Jay
You can silence the ring by touching the volume key one time.
Nope, the volume slider/rocker doesn't affect the volume, either with the phone locked or unlocked, once it starts to ring... :-(
Then there's something wrong, because it works for me.
libove said:
I have Dutty's HG R9 on my TD2, and using TD Tools 3 I've switched off the HTC Phone Dialer Canvas.
I do have the "mute ring on phone facedown" option enabled, but it doesn't seem to take effect.
When my phone is locked and I receive a call, I get a green accept slider and a red ignore slider. The ignore slider does the same thing as the End/hangup key - sends the call to voicemail. I don't see a way to simply silence the ringer without taking any action regarding the incoming call itself.
When my phone is not locked and I receive a call, I get a popup from the bottom of the screen, in black & white, with an answer button and a hangup button. Pressing the hangup button does the same thing as the End/hangup key - sends the call to voicemail. I don't see a way to simply silence the ringer without taking any action regarding the incoming call itself.
How, using the basic WM6.5 phone-is-ringing software (not sure if this is the Dialer? anyway...) with the HTC Phone Dialer canvas switched off by TD Tools 3, can I mute an incoming call withOUT rejecting / sending it to voicemail?
Thanks!
Click to expand...
Click to collapse
Set phone to quiet ring on pickup in Sounds and Display settings.
Not sure how to get it to mute, maybe S2U2 can do this, or find another dialer with this capability.
There is no "quiet ring on pickup" under Sounds and Display settings in this WM6.5.5 based build...
Is there still no solution? I also would like to mute a incoming call... like the old phone canvas...
Any ideas?
Try Advanced Configuration Tools.
i have a custom notifications tone and its about 10 sec long is there a way to silence it without pulling out my phone. i use to use a blackberry and all i had to do was push the volume rocker and it would silence call and the text tone. if any one know an app or how to silence incoming calls and text please let me know
Get a shorter ring tone.
Shortest way I know is to hold the power button and select "silent mode." mytouch doesnt have a dedicated switch like iphone and other phones.
Edit: just noticed I miss read the question. To silence an incoming call you can hit a volume key and it will be silent without actually hanging up. I believe this works on many phones.
Anyone else experiencing this problem?
I cannot click back over to the original call when using call waiting. I get the notification when I am on a call, that a second call is coming in and I get the options (ignore, send to voice, or answer). If I answer, I am never able to switch back over to the original call after I am done. Any ideas?
n my phone when I receive another call I get the options to "Answer", "Ignore", "End and Answer"
If I answer the banner at the top displays the current caller's name and call time but gives an option to "Tap to Swap".
This is what SHOULD be there emphasis on should.
Whenever the second phone call ends, I have to press the drop-down menu and take the first call off "Hold". It's really annoying and should automatically occur once the second caller hangs up.
Odd. Mine just switches back over automatically.