Database Users

Stuck on HTC Logo Screen

I just tried to flash a new ROM by putting it on SD CARD...
i pressed my volume up key and power button for 3 seconds and now my phone is stuck on the HTC logo screen...
it did even go in the HSPL screen
whatever i do it reboots and gets stuck to that screen...
pressing the red button at the back made no difference
what can i do ?

I have the same problem. The phone is stuck on HTC logo screen and is not seen by the computer so I cannot reflash. Any idea what can be done???? Mine got stuck after I installed task 29

(1) Take out the battery / Unplug the phone
(2) Put the battery back in
(3) Turn it on and keep only Vol Down pressed
You should get a tri-color screen. Connect USB. Once it says USB at bottom, you are good to go with flashing.

hard reset

these solutions don't work. I had the same problem. Anyone has an idea?

any ideas about that? anyone found the solution?

enter boot loader n flash a new rom via sd card?

omnia1994 said:
enter boot loader n flash a new rom via sd card?
Click to expand...
Click to collapse
already done that... same problem... anything else?

reubenbubu said:
I just tried to flash a new ROM by putting it on SD CARD...
i pressed my volume up key and power button for 3 seconds and now my phone is stuck on the HTC logo screen...
it did even go in the HSPL screen
whatever i do it reboots and gets stuck to that screen...
pressing the red button at the back made no difference
what can i do ?
Click to expand...
Click to collapse
put phone into bootloader requires you to press volume DOWN while power resetting the phone. Make sure the ROM is named LEOIMG.nbh and is on the root of the sd card. Make sure the sd card is 8gb or smaller unless it is a class6.
www.golazo.ca said:
I have the same problem. The phone is stuck on HTC logo screen and is not seen by the computer so I cannot reflash. Any idea what can be done???? Mine got stuck after I installed task 29
Click to expand...
Click to collapse
you need to put your phone back into bootloader, volume down while powering on the phone. then after you see the tricolored screen, connect it to the usb.
t45o5 said:
already done that... same problem... anything else?
Click to expand...
Click to collapse
what problem are you having exactly???? you haven't told us any details to help you.

same problem, after returning back to stock from android, it is stucked on first htc logo.
phone was freezing, so i decided to flash from android to stock, i used micro sd (RUU_Leo_HTC_WWE_EastEurope_1.66.479.2_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship)
now it is stucked. please help

firebroker said:
same problem, after returning back to stock from android, it is stucked on first htc logo.
phone was freezing, so i decided to flash from android to stock, i used micro sd (RUU_Leo_HTC_WWE_EastEurope_1.66.479.2_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship)
now it is stucked. please help
Click to expand...
Click to collapse
stuck where, on the splash screen?
do the same thing only this time use the HTC support page for the correct stock ROM.

thank you it helped, but i had to flash the oldest rom on htc.com.. i wonder why i couldn´t flash newer...

firebroker said:
thank you it helped, but i had to flash the oldest rom on htc.com.. i wonder why i couldn´t flash newer...
Click to expand...
Click to collapse
That's weird, maybe they didn't make a 3.14 ROM for your region.

Help BRicked ! htc incredible s....
was using clockworkmod and cyanogen,decided to flash a android revolution hd rom, intsalled super wipe and flashed it ,then flashed the rom...now phone stuck at htc logo and cant go into clockworkmod recovery,the problem is i left my phone in usb while the flashing ...
..
so decided to format sd and place the PB13IMG.zip on root of sd to reflash rom...still not working !
computer cant detect usb when tried to connect.tried installing drivers,still cant get into recovery....i am using a s-offed htc incredible s...Please help!!!!
will sending phone to htc void warrenty?if so will they repair and how much they will charge?
Your help is much appreciated ...thx !!!

Just downgrade again, I had same prob. Everything good now.
sent from my inspire 4g using xda app.

kaysen said:
was using clockworkmod and cyanogen,decided to flash a android revolution hd rom, intsalled super wipe and flashed it ,then flashed the rom...now phone stuck at htc logo and cant go into clockworkmod recovery,the problem is i left my phone in usb while the flashing ...
..
so decided to format sd and place the PB13IMG.zip on root of sd to reflash rom...still not working !
computer cant detect usb when tried to connect.tried installing drivers,still cant get into recovery....i am using a s-offed htc incredible s...Please help!!!!
will sending phone to htc void warrenty?if so will they repair and how much they will charge?
Your help is much appreciated ...thx !!!
Click to expand...
Click to collapse
woah, how the hell did you end up in this forum? lol.
can you get ADB going?
Post your problem in this forum so people who know your device better can help.
http://forum.xda-developers.com/forumdisplay.php?f=1026

HD2 TMOUS stuck after performing task29
www.golazo.ca said:
I have the same problem. The phone is stuck on HTC logo screen and is not seen by the computer so I cannot reflash. Any idea what can be done???? Mine got stuck after I installed task 29
Click to expand...
Click to collapse
im having the same problem!i installed task29 (i had elegancia rom but i wanted to try another rom)and now im stuck on the htc logo screen that says 'stick together' in a red square.....i tried vol down+power button to go into bootloader but nothing happens, then i tried to hard reset but still nothing happens...i pushed the reset button and i did it all over again but still nothing...
my HD2 is a T-MOBILE usa with :
radio 2.08.50.08_2
2.08.HSPL
3.14.531.1 elegancia rom(http://forum.xda-developers.com/showthread.php?t=651729)
i love my hd2 and i want it back...PLEASE HELP!!!!!!!

Rom update failure!

TMO USA, HTC HD2, WINDOWS 7, WinMobDevCenter,
I updated my ROM before to the stock one, but now when I am trying to update my ROM to a custom one from XDA Developers site, my phone resets and goes to the HTC screen with % bar at the bottom. The % bar stays on zero and does not move. Also I noticed when my phone resets to do that, the connection with the PC is lost. I tried three different computers, WIN XP Desktop, Win 7 Laptop, and now Macbook Pro with Windows 7 on it. I tried the "mini sd card" method flashing but no luck.
This is what I did if anybody decides to help me.
1. I reseted my phone by going using the "Factory Reset" or something like that in options.
2. I sucesfully installed hspl 2.xxx.0000 (or something like that, it was the second option tho)
3. Tried to install the ROM, even did a hard reset and did not work.
Any ideas? I am looking for cleanest, fastest ROM that comes with nothing or almost nothing.
Thanks

if you chose the option ending 0000(your step 2 above) in the hspl program then that's what you did wrong. use hspl3 and choose 2.08.hspl
2.08.0000 is for returning to stock.

I am going to do that right now, and give you a feedback right away. Thank You.

THANK YOU!!! I should definitively send you a check for that. lol

heh, my pleasure.

htc hd2 tmobile usa rom downgrad problem helpe please
i downgraded my HTC HD2 TMOBILE USA FROM ROM VERSION 213.... TO 210.. EVERY THING WENT WELL THE COMPUTER SCREEN IT SAID SUSCESSFULLY UPDATED .BUT WHEN THE DEVICE RESTARTED IT IT STACKED ON STICK TOGETHER. AND AFTER MAYBE 50 TIMES RESET AND TOOK THE BATTERY OUT FINALLY IT STARTED BUT ANY TIEM WHEN I TURN OFF THE PHONE IT STACKS ON STICK TOGETHER AND I HAVE TO RESET OR TAKE THE BATTERY OUT LIEK MAY BE 40 TO 50 TIMES UNTILE IT TURNS ON. PLEASE HELPE ANY HELPE WILL BE APRECIATED THANKS

May be a bad flash... HardSPL it again and Flash it fresh with Stock 2.10

htc hd 2 tmobile usa stacks on start up (stick together)
i have installed and reinstalled all the htc hd2 tmobile usa stock shiped roms but still it stacks and then ihave to take the battery or press the reset butoon some 40 and 50 times or i have to take out the battry and leave it for 5-10mints then it loads fine.

bent battery pin.

white HTC boot screen after ANDROID -> no reaction whatsoever

Hi XDA Devs,
I've managed to break my HD2.
I was in ANDROID and shut down the phone over A. since then:
It's stuck on the white boot screen with the HTC logo (without any numbers in the left low corner).
No usb connection, no further sign of hope.
Hard reset, battery out -> nothing seems to help.
Do you got an idea how to get my HD2 working?
Thank you in advance!
Max
HD2 was running on:
2.10 radio (Vodafone Germany)
Artemis 24

Get into the bootloader mode ! do a task 29 format ..once it is completed again get into the bootloader mode and then flash the rom u were using ! cheers

I've managed to get into the bootloader mode and perform task 29.
Right now I'm tryin to upload artemis 24 to my phone but its either stuck at 0% or somewhere between 35%-60%. never came further than that AND it always takes awefully long!
EDIT: now its always 0%. I'm flashing with SSPL_RUU.exe
Do you got an idea how I'm able to fix that?
Thanks

ok ..do one thing ..enter bootloader ..perform task 29 again ...then again bootloader ...change ur radio to 2.07.50. ...u will find this radio in the energy rom thread ..once u have flashed the radio ...enter bootloader again and flash the latest energy rom .:. forget abt the artemis rom for now ..do this and then tell me

yeah! thx, everything went just fine.
I get the feeling something was wrong about Artemis rom.
thanks very much!

Thats awesome ! ..good ! always use energy roms they are much more stable and much better and perfect in itself ,artemis is just like the stock rom and has its own benifits ! welcome anytime ! cheers

My HTC HD2 is not reacting when i touch the screen!!
Hi.... I have an HTC HD2... i have 3 months since i bought it... ever since the phone was working awsome... but like 3 weeks ago the phone started working really slow.. so i decided to do a factory reset to solve the problem... after the phone was rebooted it worked about 10 min perfectly fine.. then it locked as it usually dose (when its not in use).. but when i tried to unlock the phone,the screen was not reacting.. the problem is NOT that the screen dose not display.. the problem is that when i pass my finger throgh the screen to unlock,it dosnt work.. its like freezing... i tried to upgrade the ROM but it still gives me the same problem!!!
Is there a way i can fix this problem??? if there is i would really apreciate youre help!!! Thanks...

[Q] Crashed HD2, destroyed?

after flashing to 14 jan mdj. my hd2 crashed after 1 day of use. After that I can't boot into android or use USB. I think I even can't charge the phone. I don't see the red led. Andy ideas for fixing it? Try a new battery? It doesn't start up anymore, but it did a few times and said 12.fatal hit when booting android. I haven't tried Tricolour because I can't start it up anymore
Thanks,

When you turn on your phone what happens? What screen dow it take you to? What does it say when trying to run android? .......and for future notice this is the comnplete wrong section for this....and some more info regarding device, hspl, radio would be helpful too.

oh word? ... try this
1..first download the official wm 6.5 rom from tmobile or http://www.htchd2forum.com/general-...SID=799c9ce6abe4e3ddc05368f8432db509#msg22469
2...second remove the SD card and connect the phone to ur computer
3...hold the down volume + power buttom till u see 4 colurs and them run the tmobile official rom... let me know what happens

it doesn't boot up anymore, I will post again when I have it booting again.

All have to do is to download an htc official rom and connect ur Htc hd2 to
computer and flash it
Good luck
Sent from my HTC HD2 using XDA App

phaverkamp said:
it doesn't boot up anymore, I will post again when I have it booting again.
Click to expand...
Click to collapse
connect the phone to ur computer
hold the down volume + power button till u see 4 colors and them run the tmobile official rom... let me know what happens

In the name of the wee man.
Post this in the right bloomin' topic.
The Mods have just spent an age reorganising this whole corner of XDA and what do you do?
Bugger it all up.
Well done.
At least you are consistent, you buggered your phone and the forum. Bravo.

phaverkamp said:
it doesn't boot up anymore, I will post again when I have it booting again.
Click to expand...
Click to collapse
Can you seriously follow anyone's instructions given man? Quit trying to boot the phone. Connect the phone with your PC via the USB cable. Hold down the "volume down" key and the "power" key at the same time. Tell us if you see the tri colored screen.

phaverkamp said:
after flashing to 14 jan mdj. my hd2 crashed after 1 day of use. After that I can't boot into android or use USB. I think I even can't charge the phone. I don't see the red led. Andy ideas for fixing it? Try a new battery? It doesn't start up anymore, but it did a few times and said 12.fatal hit when booting android. I haven't tried Tricolour because I can't start it up anymore
Thanks,
Click to expand...
Click to collapse
Have you checked the battery contacts? They bend very easy, and the symptoms you describe are exactly those of that. If they are bent, VERY, OH SO VERY CAREFULLY straighten them up. If one or more are broken, I hate to tell you this, but you need to buy a new phone.

phaverkamp said:
after flashing to 14 jan mdj. my hd2 crashed after 1 day of use. After that I can't boot into android or use USB. I think I even can't charge the phone. I don't see the red led. Andy ideas for fixing it? Try a new battery? It doesn't start up anymore, but it did a few times and said 12.fatal hit when booting android. I haven't tried Tricolour because I can't start it up anymore
Thanks,
Click to expand...
Click to collapse
I think you have wrongly done the Clock Work Mod which shows the 123Fatal Hit error and ur hd2 remains stuck there. Your HD2 is not crashed at all just charge it with an external charger then go to bootloader by pressing n holding Volume Down key and Power button until you the triple coloured screen, then connect your data cable to HD2 and flash it with a stock windows mobile rom so it will restore ur hd2 and after that u can install nand rom on it by following each and every step mentioned in tutorials here. Whenever I select boot AD SD after flashing partition layout I always get 123Fatal error now I don't understand what the problem is....If someone has a solution for this problem please reply in this thread as I don't want flashing through DFT method.

my htc hd2 is STUCK.. HELP ME PLS

I bought an HTC HD2 FEW WEEKS BACK FROM ONE OF MY FRIEND.
I DO NOT HAVE THE HISTORY OF WHAT HE TRIED TO DO WITH IT.
BUT BECAUSE IT WAS STUCK/DEAD , HE GAVE TO ME FOR CHEAP.
NOW THIS PHONE IS UNDER WARRANTY TILL AUG-2012 AND IS FROM VODAFONE.
(EVEN AFTER INSTALLING ANDROID IT IS VOID)
HE MUST HAVE TRIED SEVERAL ROM/HSPL TO GET TO THIS POINT.
PROBLEM:
When I power up the phone, it displays a NRG LOGO SCREEN (energize software), and it gets stuck on it forever.
When I do hold the volume down + power button, then it comes up with the three colour screen and it says SPL-2.08.0000, AND also says rom update failed (only if i try to install and then start up)
The phone does connect through USB when it is on the three colour screen, but it does not let me install ANY OF THE romS or the spl'S...
I have tried literally every single step possible. I have tried to do task 29, i have tried install the original rom, i have tried to put the rom in the sd card and try it that way.. I have also tried to do hard reset... vol up and down and it does not complete either..
I best rom it let me install was 99% of 2.10.50.19.2.. but after 99% it got stuck .. it seems like it gets stuck within 1 min or so.. anything you do!
Some times after several hundred attempts, it does let me change the spl... as it was displaying 3.... before then i changed to 1.4..... and then to 2.08...
All i want to do is to get rid of the NRG SCREEN, so i could send to the htc ,, for repair ( i know that it is not under warranty if i used andriod, but they will not know) .. or is there any way to completely format the phone,,, is there any solution to install andriod or microsoft? pls help

Before we start, you can ask him how his device has ended up like this, can't you?
boxboy said:
I bought an HTC HD2 FEW WEEKS BACK FROM ONE OF MY FRIEND.
I DO NOT HAVE THE HISTORY OF WHAT HE TRIED TO DO WITH IT.
BUT BECAUSE IT WAS STUCK/DEAD , HE GAVE TO ME FOR CHEAP.
NOW THIS PHONE IS UNDER WARRANTY TILL AUG-2012 AND IS FROM VODAFONE.
(EVEN AFTER INSTALLING ANDROID IT IS VOID)
HE MUST HAVE TRIED SEVERAL ROM/HSPL TO GET TO THIS POINT.
Click to expand...
Click to collapse
Sir, you have forgotten your caps locked.
boxboy said:
PROBLEM:
When I power up the phone, it displays a NRG LOGO SCREEN (energize software), and it gets stuck on it forever.
When I do hold the volume down + power button, then it comes up with the three colour screen and it says SPL-2.08.0000, AND also says rom update failed (only if i try to install and then start up)
Click to expand...
Click to collapse
Because you have stock SPL, you won't be able to install any custom ROM or any stock ROM not made for your region/SN.
boxboy said:
The phone does connect through USB when it is on the three colour screen, but it does not let me install ANY OF THE romS or the spl'S...
I have tried literally every single step possible. I have tried to do task 29, i have tried install the original rom, i have tried to put the rom in the sd card and try it that way.. I have also tried to do hard reset... vol up and down and it does not complete either..
Click to expand...
Click to collapse
AFAIK, task29 is, also to be considered, a custom rom so it needs HSPL to be flashed. Are you sure you have followed the steps correctly?
boxboy said:
I best rom it let me install was 99% of 2.10.50.19.2.. but after 99% it got stuck .. it seems like it gets stuck within 1 min or so.. anything you do!
Some times after several hundred attempts, it does let me change the spl... as it was displaying 3.... before then i changed to 1.4..... and then to 2.08...
Click to expand...
Click to collapse
That is not a ROM, it's a radio. You need to flash HSPL to be able to change the splash screen (NRG Screen). HSPL should go like this: SPL 2.08.HSPL .
boxboy said:
All i want to do is to get rid of the NRG SCREEN, so i could send to the htc ,, for repair ( i know that it is not under warranty if i used andriod, but they will not know) .. or is there any way to completely format the phone,,, is there any solution to install andriod or microsoft? pls help
Click to expand...
Click to collapse
Microsoft is a corporation, Windows Phone is the OS .
One more thing, to be able to flash a LEOIMG from sd, the .nbh must be a rom that is compatible with your device (It will work if you get it from htc.com using the device's serial number)
I hope this helps. And I'm sorry if I am incorrect at something.
Good luck.
------------------------------------------------------------------------------------------------------------------------------------------------
To summarize it, you need to do either one of the following:
1- Install HSPL, and do what you want.
2- Go to HTC.com, download a rom using your Serial Number, rename file to .zip, extract the .nbh file, rename to LEOIMG.NBH [Capital letters], put onto sd card and insert into phone, boot up device while holding volume down ONLY, and make sure splash is removed and you're back to the "htc" stock, then send to repair [why?].

posting teh same post in multiple sub forums is considered rude
http://forum.xda-developers.com/showthread.php?t=1440265

Yeah, HSPL is needed for flashing pretty much everything. One thing you could do would be to flash a stock ROM from your SD card (just google it I CBA to provide links and stuff) which would reset everything to factory WinMo (including SPL to SPL3.03 [assuming you flash the latest ROM 3.14]) and from here it would basically be a fresh start. Probably the safest route without HSPL

Hi.
Thank you for your replies...
Let me tell u guys if I forgot to say earlier. The mobile phone is not letting flash any of the Hspl... be q series, 2 series or 3.series... all the times it says error 0000006 and 000000010 etc... a couple out of hundreds it did let flash but then it doesn't let me flash the factory rom fom HTC.

I have succesfuly flashed the 3.03 hspl... bit still no success in flashing any roms ... it gets stuck sometimes at 99% and sometimes at 0% and sometimes it comes up with a scrambled screen and stuck

OK,
My final.outcome.
This phone let's me flash the hspl but it doesn't let me flush any roms including the original HTC factory rom.
I can also perform the task 29. Etc but still the NRG screen is still there.
I would like to know that if I flash the original Split and send it HTC, will be repairable for free? Sure? Even with the NRG.

now i think the only option available to you is jtagging the device which may permanently void the warranty !!
it had happened with me once, but somehow it got solved !
i used to randomly install clk, magldr, radios, hspl etc multiple times !
it used to get stuck while installing and then i used to remove the battery and try again !!
somehow it started ! !!
STRANGE DEVICE !!

Yeap its a real problem!!
Now , It will not let me change the hspl to spl whatsoever I do.
I would like your suggestions
I bought this brick for £50 and I can return it to get my money back. Has any used jtagging and does it 100% work?. The thing is if I do used jtagging, and if it doesn't work ,then I can,t return it!. How much does it cost and is it worth it?

jtagging will solve your problem !!
they remove the motherboard of the device and flash the os into the motherboard directly through a device named riff box !!
refer this video for more info !!
http://www.youtube.com/watch?v=zElsUERTzOU
but pls do not try this at home ! !!
just contact a local repair shop to jtag your device !!
also u can contact these guys from the video !!
good luck ! !!

boxboy said:
I have succesfuly flashed the 3.03 hspl... bit still no success in flashing any roms ... it gets stuck sometimes at 99% and sometimes at 0% and sometimes it comes up with a scrambled screen and stuck
Click to expand...
Click to collapse
Check that the micro USB connection isn't "wobbly".
I had a TMOUS HD2 and never had any issues. Then, I sold it and got a Telstra HD2 and had big issues getting ROMs installed until I realized that the connection at the phone was a little weak. I can't send any updates to WP7 via cab sender unless the phone is in a certain position to keep the connection from breaking.

boxboy said:
I bought an HTC HD2 FEW WEEKS BACK FROM ONE OF MY FRIEND.
I DO NOT HAVE THE HISTORY OF WHAT HE TRIED TO DO WITH IT.
BUT BECAUSE IT WAS STUCK/DEAD , HE GAVE TO ME FOR CHEAP.
NOW THIS PHONE IS UNDER WARRANTY TILL AUG-2012 AND IS FROM VODAFONE.
(EVEN AFTER INSTALLING ANDROID IT IS VOID)
HE MUST HAVE TRIED SEVERAL ROM/HSPL TO GET TO THIS POINT.
PROBLEM:
When I power up the phone, it displays a NRG LOGO SCREEN (energize software), and it gets stuck on it forever.
When I do hold the volume down + power button, then it comes up with the three colour screen and it says SPL-2.08.0000, AND also says rom update failed (only if i try to install and then start up)
The phone does connect through USB when it is on the three colour screen, but it does not let me install ANY OF THE romS or the spl'S...
I have tried literally every single step possible. I have tried to do task 29, i have tried install the original rom, i have tried to put the rom in the sd card and try it that way.. I have also tried to do hard reset... vol up and down and it does not complete either..
I best rom it let me install was 99% of 2.10.50.19.2.. but after 99% it got stuck .. it seems like it gets stuck within 1 min or so.. anything you do!
Some times after several hundred attempts, it does let me change the spl... as it was displaying 3.... before then i changed to 1.4..... and then to 2.08...
All i want to do is to get rid of the NRG SCREEN, so i could send to the htc ,, for repair ( i know that it is not under warranty if i used andriod, but they will not know) .. or is there any way to completely format the phone,,, is there any solution to install andriod or microsoft? pls help
Click to expand...
Click to collapse
Don't worry ... you can give the life to your phone back... it shows fail bcus u have 2.08.0000.. so it means u Sud have 2.08 v hspl.. so try flashing hspl by getting into bootloader(3 colour) by pressing volume down + power Then flash hspl.. but remember select 2.08v.. then again after flashing hold volume down + power.. bootlooder.. then flash magdlr 1.13 ... now the phone will boot into a black screen with written mangdlr.. wen the black screen magdlr screen comes then press power off for 5mintzz.. follow the guide to flash.. there is a stick thread in NAND DEVELOP... U can get the windows version back to your phone to get the warranty...
Sent from my HTC HD2 using Tapatalk

Ok ,, some good new at last ..
I have used the HSPL4 to change my 3.03hspl to 3.030000 spl...
Success, as when i go to the tri colour screen it says spl and no hint of hspl...
Bad news, is that i still cant get the rom flashing,, as it gets stuff at some point and mostly at 99%.. Have tried both ways through SD (leoimg) and through USB.
Now final question is ... When i on the phone a big logo of NRG (ENERGIZE) writtten comes up and it gets stuck there.. the phone has SPL .. so it still under warranty to return it?.. I still have all the void sticker intact.

boxboy said:
Now final question is ... When i on the phone a big logo of NRG (ENERGIZE) writtten comes up and it gets stuck there.. the phone has SPL .. so it still under warranty to return it?.. I still have all the void sticker intact.
Click to expand...
Click to collapse
did you try to flash just a splashscreen as i suggested in your other thread? (they can be flashed alone, no need for a whole rom, , just like radios)
if you can get a stock splashscreen on there you are sorted.

Maybe try to download the original Software from HTC.
With you serial number you can get the latest windows for this phone.
Flash the Software you get from HTC.
If this is working ok you can try to install any Android ROM.
Read at first this
http://forum.xda-developers.com/showthread.php?t=905841
Try to understand and follow the steps..
But if you have even no luck with original Windows soft. You will also (maybe) have a lot of probs. with Android..

Thank you guys for all your help..
I have flashed andriod on several phones some time ago and I actually forgot the right steps to follow.
But this phone is unique is not letting me finish.
After following all the right steps, i wasnt able to install a rom succesfully even after installing the HSPL... and I am also not able to install the factory rom from htc on either the hspl or spl settings.
But i now got rid of the NRG screen and I have also installed the spl 3.03.. When you on the phone, it displays software upgrade failed..
So I have now sent the mobile to HTC as it is under warranty. I will then re-flash andriod following the right steps and see what happens!
Thanks again!

My mobile came back from HTC with a week.. Looks like a brand new one!
In the letter it says the replaced IMEI, PCBA, FL BD, W/O_ REGIONAL_ID, LEO
WOW
GREAT PHONE... ITS MUCH FASTER THAN THE PREVIOUS ONE FOR SOME REASONS