Help - Orange SPV M700 Hard Reset Issue - SOLVED - P3600 General

I have an Orange SPV M700 which has been unlocked, Hard SPL'd and a new WM6.5 ROM applied.
It has been working well for a few years now and is used daily as a satnav.
The other day, I left it and when I came back, it looked like someone had done a hard reset (blue/grey screen with "Press SEND to restore factory default, press END to quit" in blue.
I have tried pressing both send and end. I have tried both a soft and a hard reset and I have tried to get into the boot-loader screen. I have also tried my spare battery.
I keep coming back to the same screen.
any ideas on how I can get my phone back?

Can you still connect the phone to your computer or does it say not connected on the computer screen, if it was me an it came up I would re-install the same 6.5 rom.

Lil-Moss said:
Can you still connect the phone to your computer or does it say not connected on the computer screen, if it was me an it came up I would re-install the same 6.5 rom.
Click to expand...
Click to collapse
No, the computer wasn't seeing the phone. However, he problem has been resolved.
A work colleague suggested that the battery may be at fault because he had had a similar problem with one of his Palm phones. New battery purchased, inserted into phone and bingo! problem solved

Related

Has it died??

My O2 XDAII is 10 weeks old. After using the internet and the screen freezing I SOFT-RESET it. Now the screen will only flash with the O2 logo between the backlight coming on and off and a few letters/numbers at the bottom right of the screen. Ive never had any problems before...I cant soft-reset, hard-reset or (it seems) to be able to charge it. The only way in which it stops 'flashing' is to take out the battery. Is there anything I can do at home?? (as you probably guessed Im a novice at all this!)
Any help would be greatly appreciated
Many thanks, Rob
This happened to me just yesterday, although It happened in different circumstances. Baiscally, I went to turn the phone on and it wouldn't (with any button.) I tried a soft reset and all that happened was the O2 screen appeared with the backlight flashing on and off every 10secs.
Before trying a hard reset I waited to see what would happen when i connected it to the cradle at work. Soon as I connected it. it switched back on, but it was as if it had done a hard reset (ie everything I have installed was erased. Good job I made a backup!).
Basically, it seemed to rectify the problem once connected to the cradle, which hasn't happened to you I know, but i thought I'd let you know that I got the same "symptoms".

XDA Exec, STUCK ON SPLASH SCREEN

Ok, Ive got a new problem with my XDA Exec.
Opened it up and tryied to turn on the backlight and nothing. tried a soft reset, nothingtried a hard reset now it just sticks on the splash screen, the red writing comes up on the right and side and just hangs there forever!
Please help
You're stuck. apparently the only remedy is turning it in to repair. For most of us it is under warranty.
Just off the phone to 02. Theres sending me a new one via courier on monday. it's less than a day old.
Is this a comon fault with the Exec?
erm ... I managed to experience this problem.
I was trying to uninstall SPB GPRS thingy that comes with the O2 package, and it just wouldn't go. I ended up deleting the program files and getting an error when it started up, so I deleted the GPRSNotify file under Startup. It never worked again ...
I got the splash screen, tried soft and hard resetting and various permutations (including standing on one leg and while holding breath) ... nothing. Did try to install fresh ROM, but startup wouldn't get far enough to let PC load ROM over USB.
Ended up contacting O2 who sent me a nice shiny new one, as it was only three weeks old. This time I haven't installed GPRS monitor thingy, and I don't intend to fiddle with it again ... or at least until I've forgotten my lesson ...
Sorry i ment to give you guys an update on this. I did manage to get it working again, although i still accepted the new one the sent to me.
What i did was installed a new rom off the 02 website. at 1st the computer couldnt see the phone so wot i did was enter what i think was the programming side of the phone. i found the instructions on how to this on the net. i think i pressed the 2 soft keys and the light switch while pressing the reset switch with the stylus (i think that was the buttons but unsure as i cant find the page again) when the screen light up again there was some faint writing on the screen with the word serial or usb. Double clicked on the rom file and 30mins later my phone was revived.
Funny it was the gprs monitor that i too installed before the phone screwed up? ive since installed it again on the new phone and have had no problems with it since.
trickydickyd said:
I think i pressed the 2 soft keys and the light switch while pressing the reset switch with the stylus (i think that was the buttons but unsure as i cant find the page again) when the screen light up again there was some faint writing on the screen with the word serial or usb.
Click to expand...
Click to collapse
Otherwise known as Bootloader mode
Aye, thats the one.
Cheers

s200 won't boot into windows anymore

hi,
i recently wanted to simply restart my qtek s200 (g3), it stops at the blue windows mobile boot screen and just hangs and does nothing (i've waited for hours).
I am not using any mods, simply the original rom/software. The only thing extra installed is 3rd party software and the home screen from the new htc touch (i've have been using it for some time now, and yes, i have been able to reboot several times during that period).
I have no idea why it isn't working anymore since I have been using it in an ordinary fashion and have not installed any software lately...
What I have tried so far:
- soft reset
- removing battery, sd card, sim card
- hard reset is impossible due to the fact that my comm button no longer functions.
Any ideas how I can get this phone to boot in windows again?
If there is no "normal" way, then a hard reset would also work for me as the phone contains no important data.
Let me know if you need more info.
Thanks!
thierry86 said:
hi,
i recently wanted to simply restart my qtek s200 (g3), it stops at the blue windows mobile boot screen and just hangs and does nothing (i've waited for hours).
I am not using any mods, simply the original rom/software. The only thing extra installed is 3rd party software and the home screen from the new htc touch (i've have been using it for some time now, and yes, i have been able to reboot several times during that period).
I have no idea why it isn't working anymore since I have been using it in an ordinary fashion and have not installed any software lately...
What I have tried so far:
- soft reset
- removing battery, sd card, sim card
- hard reset is impossible due to the fact that my comm button no longer functions.
Any ideas how I can get this phone to boot in windows again?
If there is no "normal" way, then a hard reset would also work for me as the phone contains no important data.
Let me know if you need more info.
Thanks!
Click to expand...
Click to collapse
Since no hard reset is available... try removing the battery for the whole night.
If you do manage to get to windows then watch out for the startup folder, you're probably overloading the memory at startup.(htc home and psxut eat a lot at startup and windows as well)
i have removed the battery, sim and sd, and just left it there the whole night, but it still won't go further than the windows boot screen...
any suggestions ?
is is possible to do a hard reset by connecting it to usb and enter the bootloader somehow ? if yes, how ?
thanks!
hi,
have you tryed entering bootloader by the normal process?
"Hold down the camera button and reset the device. (Boot Loader Mode is: Press Camera + Soft Reset, then release soft reset and keep pressing camera button till appear the Boot Loader.)"
regards
yes, I can get into the bootloader, I can then also connect with USB with a notification at the bottom of the screen saying it's connected. However, I have no idea what to do afterwards ...
thierry86 said:
yes, I can get into the bootloader, I can then also connect with USB with a notification at the bottom of the screen saying it's connected. However, I have no idea what to do afterwards ...
Click to expand...
Click to collapse
Okay then there is still hope.. When you have connected the device run an opdate tool like the NVID WM5 Rom.. that should work as a hard reset..
are there any working links available for this ? rapidshare seems to have disabled this...
thanks!
thierry86 said:
yes, I can get into the bootloader, I can then also connect with USB with a notification at the bottom of the screen saying it's connected. However, I have no idea what to do afterwards ...
Click to expand...
Click to collapse
As long as you are able to enter bootloader then you can flash it with any old prophet rom. I had the same issue after installing WM6 rom. I used a Spanish rom on wiki to bring it back and then installed WM6 VII touch. So far it has worked well for a week.
HTC 6tab Home screen killed my 818pro!!!!!!
Here is what happened a few days back. My 818pro (aka prophet) suddenly heat up while not in use 3 days ago. I thought it was caused by the hot weather in my country (I was driving with aircond in full blast). The heating up eventually go away. Then 2 day later, after I put down a call, my phone just frozen / hung. Hence, I do a soft reset & guess what It never recovered & stop at the black screen with the dopod logo while restarting. Some service centre I visited told me that the main memory chip need replacement & reflash!!! I can't even see the window screen. I have use the HTC 6tab for 2 months & I am very sure it's the culprit here. Hopefully you are not having the same problem like me
Try plug in the ac charger before u do soft reset. My phone need it in order to restart after soft reset (after I started using the HTC 6tab Home Screen).
That is before my phone die yesterday

Help Please? My Wizard (Cingular 8125) is stuck on hard reset screen.

I have a HTC Wizard (Cingular 8125) that i bought several months ago. I SIM and CID unlocked the phone, installed T-Mobile's software and upgraded windows to a custom Mobile 6.5 build i got from this site. The battery was near dead the night before so i plugged it in and went to bed, woke up the next morning started using it and the windows record utility kept popping up repeatedly and recording. so i shut the device off and went to work for the day, came home and turned it on and it was stuck on the "Press Sent to restore factory default, Other keys to quit" None of the buttons work, i can take the battery out and put it back in as soon as i turn it on it returns to this screen, if i plug it in it returns to this screen. i have tried to hard reset, soft reset, charging the battery further, etc. nothing seems to work. Any advice/comments would be highly appreciated. I still owe money on this phone and im not quite ready to give up on it yet...
i just got it to sorta work this morning, keys are finnicky and software runs real buggy, im gonna reinstall windows and see if that solves it however i believe it is a hardware issue. any opinions?
once i got it going i hard reset it and updated all my software. appears to be working fine now. my build of windows must be to blame or a undiagnosed hardware problem, not sure just happy it works again
what happened?
dsabin2011 said:
once i got it going i hard reset it and updated all my software. appears to be working fine now. my build of windows must be to blame or a undiagnosed hardware problem, not sure just happy it works again
Click to expand...
Click to collapse
didnt understand...
plz explain ince again what´s happening with your phone ok?
i will try to help (if i can)
Good luck!
WM6 doesnot boot up
i upgrade the wm6 form wm5 on htc wizard ( cingular 8125) but after reset my device does not boot . i tried to reset again and again but the device does not work. It just freezes and does not do anything. Plz help

Helppppp HD2 Well not boot up anymore

Hey,
I had my HD 2 for 2 days now.
It just crash on me for the first time soft rest the unit now it well not boot up anymore stuck in the HTC with white background screen and the rom version at the left bottom side.
Tried removing battery nothing still stuck.
I tried to hard rest the pda but cannot get it to hard rest.
Can someone explain how to hard rest what do you have to do hold the volume key up or down and switch the unit on tried it but nothing.
Please any help.
Thanks
Gigino
Have a look here (point 15) on howto do the reset(s)
http://forum.xda-developers.com/showthread.php?t=583638
Good luck..
Same as Gigino, my HD2 is only giving me white HTC screen. I haven't even had it long enough to connect it to my pc. No messing around. It locked up about 5 times in the 5 days I have had it. Each lock up was only resolved with the battery removal. Curiously no lockups until I set an alarm.
The difference between my issue and Gigino is that I do not have the rom version showing up at reboot, just the white screen. Hardware issue, or software?
Followed the Hard Reset procedure as outlined by HTC and your link above. The reset commands are recognized, but after reload, back to white HTC screen.
Bricked?
If you cant get functionality back by taking the battery out or by soft or hard resetting then theres not much more you can do. You could try taking the battery out and giving it a full charge with the mains charger provided but I dont think that will do much good.
As long as you havent flashed a new rom with the goldcard then call your service provider. If you got a sim free phone then call the place where you bought it as its covered by warantee. You should be able to get it replaced if theres a fault.
the same thing happened to me after 2 weeks with phone, I'd had no problems with the phone then one morning while using opera it froze. I had to remove the battery to try and reboot the phone but it wouldn't boot past the htc screen. eventually after removing the battery several times the phone wouldn't even turn on, also the phone got very hot with the battery in. I called htc and told them and they picked up it for repair. it looks like they couldn't fix it cos they sent me a replacement phone. they returned the phone to me within a week.
HTC White Screen of Death
Thanks, guess I feel a bit better knowing it wasn't anything I did..and that I am not alone in this world of WSOD
I have contacted the seller and haven't heard back yet. I don't imagine it will be a problem. Perhaps above and beyond the alarm clock/freezing thread a WSOD thread is in order until it is determined if they are related.
Thanks all.
GR8
Update;
I pulled battery and replaced so device is off. Charged over night and the orange power charging light didn't go off or go green by morning. device was hot.
Get this though, when I pull the phone off the charger the orange light doesn't go out!. Now the phone won't turn on either. Had to pull battery again to make orange light go out and when it powered back up, back to HTC whit screen.
gigino said:
Hey,
I had my HD 2 for 2 days now.
It just crash on me for the first time soft rest the unit now it well not boot up anymore stuck in the HTC with white background screen and the rom version at the left bottom side.
Tried removing battery nothing still stuck.
I tried to hard rest the pda but cannot get it to hard rest.
Can someone explain how to hard rest what do you have to do hold the volume key up or down and switch the unit on tried it but nothing.
Please any help.
Thanks
Gigino
Click to expand...
Click to collapse
I don't know what is the cause.
But it is really pissing me off.
The only solution out is to do a "hard" reset by holding volume up and down TOGETHER while doing that .... press the power on button for about 1 second ... then ONLY let go the "power on" button which still hold volume up and down.
You should see the screen to restore to factory default .... and proceed to do so.
I have encounter quite a number of times but after trying various "solution" ... it still happens.
By the way, I am using cooked ROM (which I don't think is the problem).
palmerj100 said:
the same thing happened to me after 2 weeks with phone, I'd had no problems with the phone then one morning while using opera it froze. I had to remove the battery to try and reboot the phone but it wouldn't boot past the htc screen. eventually after removing the battery several times the phone wouldn't even turn on, also the phone got very hot with the battery in. I called htc and told them and they picked up it for repair. it looks like they couldn't fix it cos they sent me a replacement phone. they returned the phone to me within a week.
Click to expand...
Click to collapse
I encounter similar situation .... was installing the new taskbar .... then it took very long ..... so while the installation in progress thingy is still in the middle .... I did a soft reset ... then it start up till the white screen and stock there and showing the ROM version etc at the bottom left.
So have to do a Restore to Factory Default to get it up and running again.
Seems there is something really wrong with this model.
I have it for two months now and lots of issues.
Now it is with HTC for repair as I also have the white screen with green HTC issue.
Nothing helped Hard Reset nor flashing rom.
I can't wait to get it back ;-)
Tons of issues with this phone, but my love for it is just a bit bigger than the hate.
hello all gettin frustrated here too bout a week ago my brick started and stopped on std rom reflashed duttys 1.3 and new radio.was fine for a few days then it seemed to crash and hard reset by itself.now i have a crash every day which inccurs a hard reset very annoying........gets stuck at boot screen as does every ones.now if you if your like me and have HSPL,cooked rom and upgraded radio.....sorry htc....and are sending it back for repair,you should still be able to activate bootloader mode and reflash std rom/radio.if its like mine after flashin it might behave as normal again untill next crash.so.........
1. Turn your phone off
2. Press and hold the VOLUME DOWN then Press and hold the POWER button. After about 3 seconds the tri-coloured screen should appear
3.connect it to your pc it should install drivers.the screen should now say "USB"
4.reflash with std rom/radio (should be located here http://forum.xda-developers.com/showthread.php?t=577717 and http://forum.xda-developers.com/showthread.php?t=611787 and bingo HTC are none the wiser and it may restart again if it does dont trust it!!!!!!!!
i think i read somwhere that a shipped rom will remove HSPL but you might want to clarify that with a senior member here.
camo.b said:
hello all gettin frustrated here too bout a week ago my brick started and stopped on std rom reflashed duttys 1.3 and new radio.was fine for a few days then it seemed to crash and hard reset by itself.now i have a crash every day which inccurs a hard reset very annoying........gets stuck at boot screen as does every ones.now if you if your like me and have HSPL,cooked rom and upgraded radio.....sorry htc....and are sending it back for repair,you should still be able to activate bootloader mode and reflash std rom/radio.if its like mine after flashin it might behave as normal again untill next crash.so.........
1. Turn your phone off
2. Press and hold the VOLUME DOWN then Press and hold the POWER button. After about 3 seconds the tri-coloured screen should appear
3.connect it to your pc it should install drivers.the screen should now say "USB"
4.reflash with std rom/radio (should be located here http://forum.xda-developers.com/showthread.php?t=577717 and http://forum.xda-developers.com/showthread.php?t=611787 and bingo HTC are none the wiser and it may restart again if it does dont trust it!!!!!!!!
i think i read somwhere that a shipped rom will remove HSPL but you might want to clarify that with a senior member here.
Click to expand...
Click to collapse
If you flash a shipped rom via activesync as you described then the HardSPL will be left intact and HTC will be the wiser and will invalidate your warranty.
The only way to remove the HardSPL is to flash a shipped rom via microSD Card which will flash the shipped rom, radio and spl back and will leave you with a stock device.
White screen with HTC logo is a hardware defect
I also have the issue with not booting HD2 after less than a month of use . It shows white screen and green HTC logo but without the red digits in the bottom part of the screen. And one more strange behavior to mention - when phone is switched off and I connect it to the charger it starts itself after 30sec approximately.
What is inside:
Original SPL with an original ROM but for different region than the one which originally was inside. I flashed it by SSPL (without using HSPL).Only ROM was flashed without radio as radio was the same.
What checks were done:
1)Soft reset
2)Removing of battery
3)Hard reset several times
4)Flashing back with the original ROM through ActiveSinc and cable from computer. As the original SPL is intact this should return it to the factory condition. After flashing I did 2 hard resets. But no change - still showing white screen on boot up.
Finally I gave it to the repair workshop. They confirmed that this is a hardware problem and sent it for repair in authorized HTC service.
Suggest that this is a problem with a bad soldered chip (integrated circuit) during manufacturing of the PCB. In this case the power controller chip is suspected. The contact pad of the chip and solder are touching each other and phone works. With the time passing the contact surface oxidate and contact is lost. So initially the phone will work but reset itself occasionally while the contact is instable and will stop fully to operate when the contact is completely lost. Only replacement of defective PCB can rectify this problem. Trials to re-solder the chip are usually not successful. This is purely manufacturing defect. However sometimes it may happen if you drop down your phone.
i had same problem, it was stuck on first white screen with some version numbers in red in bottom left.
I did a hard reset and it got fixed.
i had not installed anything or flashed anything. it just got stuch at that screen 1 fine day for no reason
mskip said:
If you flash a shipped rom via activesync as you described then the HardSPL will be left intact and HTC will be the wiser and will invalidate your warranty.
The only way to remove the HardSPL is to flash a shipped rom via microSD Card which will flash the shipped rom, radio and spl back and will leave you with a stock device.
Click to expand...
Click to collapse
I have the same problem my htc hd2 freezes at the white screen.
I have tried to do a hard reset but i have not the time to put the usb cable in at the red green white screen.
Is it possible to resolve this problem or must I send my phone to HTC.
Thanks.
Hermanb
WSOD FIX
To all the people having WSOD issues, check your microSD cards. I had this issue while ago with the white HTC screen and NO RED TEXT and I norrowed the problem down to my microSD card. When taking it out of the HD2, it would boot up fine. So I plugged my card into a USB adapter on my PC, formatted it and then put it back into the HTC. Everything worked fine.
EDIT: My HD2 is a T8585 and is unbranded bought from UK. I have always been using the stock 1.66 WWE ROM
I have exactly the same prob as camo.b, and right now I`m formatting my SD card, hoping that I'll be able to at least restore the SPL so that the warranty will still be available. I'm bringing it in tomorrow, if everything turns out to be fine with my SPL...
AinsCrowbar said:
To all the people having WSOD issues, check your microSD cards. I had this issue while ago with the white HTC screen and NO RED TEXT and I norrowed the problem down to my microSD card. When taking it out of the HD2, it would boot up fine. So I plugged my card into a USB adapter on my PC, formatted it and then put it back into the HTC. Everything worked fine.
Click to expand...
Click to collapse
Stil have the same problem even with the Sd card out,
hermanb2004 said:
Stil have the same problem even with the Sd card out,
Click to expand...
Click to collapse
My HD2 will not let me flash anything, even though I can get into the bootloader screen. Right now it's semi-bricked, and I have tried flashing a stock ROM via both usb and sd card, I have tried using task29, I have even tried uninstalling HSPL, but nothing works. Everything fails, either at the beginning, at the middle or at the end of the operation.
I flashed it with a shipped rom and he works,
I was unable to do a hard reset with any card still in the device. be sure both sim and sd card are removed, then reinstall battery and follow vol up/down etc. procedures. good luck.

Categories

Resources