Hello,
i m in problem with xda atom running wm6.5 clean ROM that was downloaded from this site.
my mobile is blinking red led when charging.without connecting charger mobile is not switched on.a cross sign in netwok
when i click phone layed in settings menu its return msg below
"A wireless radio must attached to use the phone"
in system info , radio:not ready
can anyone tell me what to do?
plz reply me soon
i knew that this forum is quite active.but within 12 hours i didn't get any solution about my problem.
Related
i have recently bought a XDA 2 i and i was upgrading the ROM on it and i was half way through the update when i had a power cut!! it now says on the front of the xda USB at the top and V1.60 At the bottom both in red? i have tryed to do a re-set and that wont work and also tryed to re-install the update but all it says the rom is not surported please contact your vender?
plz could some one help me THANKS Scott
try this it worked for me i was worse i had my bluetooth connected to the activesyn accidentally click on the himaupgrade and had the bootloader stuck too!!! and 1 more thing go and change the version to 1.72 tmobile its a good rom
http://forum.xda-developers.com/viewtopic.php?t=9047&highlight=error+100
Can anyone help me out i was trying to downloading a new software upgrade for my mda pro and the computer froze on me no the phone is stuck with the screen saying with no light on serial at the top of it and at the bottom it say v2.01 but when i put the usb cable in or charge it it says usb on the screen instead of serial.The programme crash and now i cant ger out of that screen ive just told u about.I can do i hard restet and the light goes on saying press 0 to restore factory default and press x to exit.
When i press 0 it just goes back to the 1st screen i jst told u abt.With no light on and cant get light on or do anything with it.HELP i think when the update crashed on me it crashed the phone to and just kept on that screen with the serial on it.ACTIVE Sink will not work anymore when i put cable into the comptuer with my phone so updaing my phone agine will not work.Can anyone please point me in the right place to fix this promblem.Many thanx mono33
PS sorry it was so long winded but i needed to give you all the info possible i could give you.If there anything asle u need to know ust ask me and ill tell u what i can.Many thanx mono33
http://wiki.xda-developers.com/inde...ose stuck on Boot Screen (UNI_exitbootloader)
or
http://wiki.xda-developers.com/index.php?pagename=Instructions for those stuck on Boot Screen
Hi there a big thanx to you for doing this for me this works great im so happy now.The 1st link is the 1 that work better for me.Its still loading up all the softwere onto my mda pro if ive got anoth problem ill get back to you.What a great site.You have just made my day.Thanx mono33
PS Im so sorry if i posted this in more that 1 place on this fourm but i did not know where to post it.
--------------------------------------------------------------------------------
Hi...
I was trying to Upgrade my O2 XDA Exec Rom with Windows Mobile 6.5 by explode. The process went successfully till 99% and after that it ended up with Error. Then I unplugged my pda from the pc and tried to restart the device. I was surprised that the device did not respond to any of the following
Soft Reset
Hard Rest
Boot Loader mode Start (Bulb + Power + Reset)
It is totally blank screen whatever you do.
When I connected the device to the pc with usb cable, a Red Light is shown for 2 seconds and then goes off and a message comes up on the pc that "USB DEVICE NOT RECOGNIZED".
Then I tried to Remove battery from the device for a whole night and the next day morning i did all the above procedures again to get no results.
Kindly Help me out
Thanks
Dinesh Kumaar
dineshkumaar said:
--------------------------------------------------------------------------------
Hi...
I was trying to Upgrade my O2 XDA Exec Rom with Windows Mobile 6.5 by explode. The process went successfully till 99% and after that it ended up with Error. Then I unplugged my pda from the pc and tried to restart the device. I was surprised that the device did not respond to any of the following
Soft Reset
Hard Rest
Boot Loader mode Start (Bulb + Power + Reset)
It is totally blank screen whatever you do.
When I connected the device to the pc with usb cable, a Red Light is shown for 2 seconds and then goes off and a message comes up on the pc that "USB DEVICE NOT RECOGNIZED".
Then I tried to Remove battery from the device for a whole night and the next day morning i did all the above procedures again to get no results.
Kindly Help me out
Thanks
Dinesh Kumaar
Click to expand...
Click to collapse
Try to reflash with another ROM
And maybe your battery is not working
Good luck and don´t forget to vote!
Im new to this forum and spending a few weeks doing searches I have found a new world of things I can do with my M5000! Only problem is I have the same problem as this guy. The problem started with no GSM, No Protocol version and no IMEI number, After countless rom installs and failed all I thought I left the sim in? Took batt out, No sim, Put the batt back in and now it wont turn on or do anything.
Has anyone found a solution to this problem or its it an expensive paper weight?? Im lost without it!
ronnie5 said:
Im new to this forum and spending a few weeks doing searches I have found a new world of things I can do with my M5000! Only problem is I have the same problem as this guy. The problem started with no GSM, No Protocol version and no IMEI number, After countless rom installs and failed all I thought I left the sim in? Took batt out, No sim, Put the batt back in and now it wont turn on or do anything.
Has anyone found a solution to this problem or its it an expensive paper weight?? Im lost without it!
Click to expand...
Click to collapse
Welcome to the forum
You have a great device!
Have a look here:
http://forum.xda-developers.com/showthread.php?p=3999833#post3999833
Hope it helps and good luck,
Hi,
I made a HSPL and it's succesfull cause i saw "we hacked it" on screen, than i download a rom from htc's site and install it successfully and than my device turned off.
I tried all of the button variations but unable to open my phone again. I tried the hard reset (volume down+on) and etc.
And still no sign of living
I tried another battery which is working and still a NO. I tried to charge it and no amber or green light appears.
But i find out when i connect the device to pc with usb, it gives me a sign of living that my 64 bit win 7 tries to install a driver called Qualcomm CDMA Tech. MSM driver. But unable to install it too.
Please tell me what to do cause i need to give this phone working to my cousin.
You downloaded a rom from HTC's site? Im no expert... but could you link to where you found this?
www . htc . com/tr/SupportViewNews.aspx?dl_id=878&news_id=534
Hi,
It's a Turkish rom upgrade, i wanted to change the WM to Turkish
Interesting.... but its Tmobile US HD2?
Yes it's a Tmobile US HD2
but the rom isn't tmous.and it won't have a .50. radio.
unlucky. theres a thread sticky at the top of the tmous section with a possible new brick fix. don't know ifit's this problem,but worth a look.
edit - ROM versiyonu: 1.66.468.1
couldn't find it actually i'm a newbie can u give me the address?
bookmark this
http://forum.xda-developers.com/forumdisplay.php?f=631
that's your tmous section the thread is top one or two posts in rom development section
I read that topic now but i couldn't understand how will i open the device to bootloader status cause i tried it million times and no sign of living from my leo
first i have to put the device on bootloader but this is my problem
yeai've just been reading it too. seems it's for a different problem.
your only hope then is take it back.
2 words: Search Function.
Seriously though, please use the forum's search function before posting yet another thread.
On topic, your bricked. The brick fix only works if you can actually get to the bootloader: which you can't do because you installed the wrong ROM. The only current solution is to send it back to T-Mobile and play dumb.
Sorry,
~Jasecloud4
htc hd2
i put a rom on my phone it looked like it was working whem i came back my phone was black so i thought it was off so i thought it will turn on so i tryed turning it on it dosent at all i also tryed hard resr hold up and down to manufacter reset and nothing it stays black but when i connect it to my computer it says its connected but nothing pops up please help im only 13 and my parents r going to scream the living hell out of me so work hard and help or even send me a free htc hd2 thanks
actually ur phone bricked.only the solution is jtag method to getting bootloader.better u have to give this expert tech in any service centre........
does anyone know how to upgrade the bootloader on the himalaya at the moment mine reads at the top of the screen SERIAL and at the bottom V1.01.
I have a file which i think is a upgrade [boot_1.06.nb0]
but i have to need to know the do's and dont's as i would think this would be if done wrong brick my himalaya?
any help or links would be thankfull?
advanced15 said:
does anyone know how to upgrade the bootloader on the himalaya at the moment mine reads at the top of the screen SERIAL and at the bottom V1.01.
I have a file which i think is a upgrade [boot_1.06.nb0]
but i have to need to know the do's and dont's as i would think this would be if done wrong brick my himalaya?
any help or links would be thankfull?
Click to expand...
Click to collapse
The only one question is
Why the hell you want to do that?
I have 1.01 also on my second today-use himalaya and it is really stable and works same as 1.06, but has some debugging output in mtty which is so useful
I tried also to upgrade it and I failed.
I have an O2 XDA II with windows mobile 2003 on it.
When in Bootloader Mode it says v1.01
when connected to the PC it says USB so i know its working in its own little way
I am trying to upgrade it to windows mobile 6.5.
I have tried everything so far and searched forums and tried things suggested on them but i just cant seem to do it.
Can someone send me a guide on how to do it please.
id be very greatful.
Thanks in advance.
mikeymcmk said:
I have an O2 XDA II with windows mobile 2003 on it.
When in Bootloader Mode it says v1.01
when connected to the PC it says USB so i know its working in its own little way
I am trying to upgrade it to windows mobile 6.5.
I have tried everything so far and searched forums and tried things suggested on them but i just cant seem to do it.
Can someone send me a guide on how to do it please.
id be very greatful.
Thanks in advance.
Click to expand...
Click to collapse
Hay mickey tell me that are you able to sync data or contects,msgs etc with system without disconnecting ?????????
or sometimes connection disconnects automatically ????/
if yes then put something stable thing in between data cable & device.
reply soon
KAASHP said:
Hay mickey tell me that are you able to sync data or contects,msgs etc with system without disconnecting ?????????
or sometimes connection disconnects automatically ????/
if yes then put something stable thing in between data cable & device.
reply soon
Click to expand...
Click to collapse
if anybody have same problem do as per my suggestion
put something in between data cable & device if you connect it without disconnection then it works flash the rom after putting it in bootloader mode
Don't do it
the bootloader is the main program which executes the system programs so avoid to upgrade bootloder.
the result will be permanent damage to your lovable device...
it can't boot more. so be careful.
no need to upgrade it as per my suggestion.