Related
Hi all!
With the latest Dopod's ROM it was nice for the first month, but now I have strange behaviour.
Sometimes the device does not return from standby/suspend mode. It does nothing at all if I press the power button. The LEDs are blinking as usual and if I call my mobile from other phone, I got no answer signal, whi my Prophet does not ring at all, means that GSM part works. Any alarmas and notifications fails to appear, as well.
I noticed, that the prsence of any extra unclosed applications increases the chance to hang. So far, I have no idea how to workaround it...
Any ideas? Is someone have the same problem?
It happens to me with my JAMin with both the old and the new WWE rom. somebody exolain it with the backlight settings, but nobody really understand why it happen
Someone alse have this problem?
I also had this issue for a time. I performed a hard reset and it stopped happening, so I am going to assume that it probably had something to do with some of the software that I had installed on it. My money is on SPB PocketPlus. I've not installed it since the hard reset and it hasn't happened since.
Any extra ideas?
I have the same behaviour since the very first day i upgraded to the latest rom.
I find that it happens regularly if it does, meaning you soft reset the device to get access again and then sure enough one hour later again the same behaviour. I have been on travel the last weeks, where i did not have a chance to sync the device and I have not experienced this behaviour at that time.
Maybe it has something to do with the Sync Process.
I hope we can dig into this a little more because it is really annoying. Especially if you consider that the phone does not ring anymore so you never know if someone calls or not.
Cheers Ulf
Password?
Have you set a password on your phone? If so, then remove the password and see if it makes a difference.
Yes I use the Password Funtcion on the PDA part and also for the SIM card.
I will try to turn off the PDA password and see what happens.
I keep you posted.
Thanks for the suggestion.
Ulf
___________________________
Dopod 818pro
Hi All,
turning off the PIN function has solved the problem. The effect is reproducible.
Raised a next question though:How to protect from your wife sniffing into your private appointments without using the PIN?
Gruss Ulf
I have no used any passwords, but has the problem. I've noticed that it happens when the phone is charging. But not only that.
i had the same issue...i read before somewhere in the other forums...(maybe this forum but couldn't find it) to adjust the backlight and standby time to the same value..that fixed mine and hope will work on yours.
thycpt737 said:
i had the same issue...i read before somewhere in the other forums...(maybe this forum but couldn't find it) to adjust the backlight and standby time to the same value..that fixed mine and hope will work on yours.
Click to expand...
Click to collapse
Thanks great, so far it helps. If I got the bug agait - I will post. BTW, on the Dopopd's 2.15 it is the only reason for softreset, all the rest works fine!
I have the same problem with prophet touch IX and VIII.
Sometimes, after the device was set to standby (or the display was disabled after some minutes), I can't enable it by pressing the powerbutton.
It seems to have contact to the GSM net (you can call the phone, but it won't ring).
ActiveSync also recognizes the phone, but won't connect.
Maybe this happens less often with battery ~70-100%, but I'm not sure.
The problem occured some weeks after installing Touch IX, and didn't disappear after changing to Touch VIII.
With pdaviet 6, there wasn't anything like this (only the known bootscreen-freeze-problem).
Any ideas?
I had the Standby of Death SOD this is when the phone fails to come out of standby with a power button press. This issue only affects some people on some networks. I'm not sure if its a network problem or a software problem but as only a minority of people have it, I suspect its mainly a network problem there is a software solution.
The solution is to change the phone settings band option from auto 3G/2G to either 3G Only (WCDMA + UTMS 2100 in Europe) or 2G Only (GSM + AUTO) depending on your requirements.
Also read this thread http://forum.xda-developers.com/showthread.php?t=540943&highlight=standby&page=2where the resolution was to get a new SIM.
Obviously this only solves the problem when the crash is because of the sim and/or settings which impact the sim. To rule out a software cause its best to start with a hard reset.
Hi,
I have MDA Vario version of HTC Wizard.
After a ROM upgrade (to version 2.21.2.11) I have the following problem :
If I set AlwaysOn=1 in the registry, then GPRS is always connected as it should be - but when the device goes out of standby (by pressing (I) button or by an incoming call/message), the keyboard and touch screen do not respond for 10-20s. I can hear beeps when pressing keys but nothing happens (e.g. I cannot pick up a call...). After an annoying while, everything goes back to normal until a next standby-wake up cycle.
I've re-flashed the device with my operator ROM three times already, no other programs are installed (except customization stuff) and still have the same problem.
Before I decide to use some custom ROM, I'd rather try to find some other solution...
Any idea ?
regards
Maciek
AHHH me too
same setting applied and now i can i get a white screen after the tmob boot screen. when i call my phone it dosnt ring but the send & end buttons light up. the green signal indicator light is on too, and thats it. it also sleeps after a few min like normal, but the when i wake it up, the signal light is flashing but the backlight is not on. i really want to figure out how to put a txt file in the root of a card with instructions ot reinstall the backup reg i have. or get an activesync of my favs, list of apps, and outlook. any thoughts would be appreciated.....its my first ppc/wm device (xircom rex 6k --> handera 330 --> sharp zaurus 5500sl --> sharp zaurus 6000l --> HTC Wizard/T-mobile MDA Vario).
Resurrection
Hi - I am having a problem almost identical to the one in the first post. when my phone is in standby something happens which means it does not respond when turned on for about 20seconds, although it will anser a call. it's very annoying if you want to add a date quickly or send a text.
I have turned off gprs always on, removed any storage card plugins, and changed exchange server to only sync the last 3 days instead of everything. I am really a bit confused as tbis problem has only come about since I installed the tmob 2.26 rom and latest uk radio (after unlocking my phone) my phone previously worked fine with the current uk rom but was very slow toboot up. I don't really want to downgrade but i'm not seeing much option rihgt now. did anyone ever solve this?
any help greatly appreciated.
I am not really sure if this is a result of the GPRS ALWAYS ON settings - it just does not look that way!
I had a similar problem without having GPRS always turned on. After I reflashed the phone with exactly the same ROM again everything works fine. Did you booth install the CUSTOM ROM integrated in the flashed ROM as well or did you perform a SOFT RESET before it could install? The reason I ask is because of I think the problem is in the way how the WIZ writes / adds contents to the REGISTRY. It might have been that you resetted the device a bit too fast after HARD RESET or REFLASH and some of your REGISTRY KEYS are messed up!
If you have the possibility to perform a HARD RESET or REFLASH of your device: please try it and see if the problem persists! But please do not reload a backup afterwards because it would import also the faulty registry again ...
Please post your results afterwards, so, others would have a solution in future!
will give that a shot, although I did a completely clean install on this phone - no imported backups etc... is there any tool that can reset my registry to default settings?
the_angry_monkey said:
... is there any tool that can reset my registry to default settings?
Click to expand...
Click to collapse
Not really!
Depending on your phones ROM and CUSTOM ROM your registry will differ from others anyway, so, the only one way to get a 'default registry' is to perform a hard reset.
I just got AMEO from T mobile which I believe the same as HTC advantage.
despite of being SIM locked by T-mobile, I am experiencing another problem in waking up the device after it goes into sleep mode.
After I left the device idle for few minutes, it turn the whole screen off. (not only the back lit).
I can see the LED for BT/wifi still blinking.
But no matter which button I press, it couldn't be turn on at all.
As final resolve, I have to soft reset the device every time after it sleep!!!
Can some experts here advise me? is it a defective unit? or some other settings are wrong? Do I need to return it to the vendor?
I don't want to keep the device always on by disabling the auto off feature in power setting either.
Does someone have the same problem like me?
Thanks for any advise in advance.
What happens if you put it on the keyboard while "asleep"? Even if it means taking it off there first.
If doing that and pushing the power button fail to turn it on, it's a defective unit.
it's the same problem even i attach it to the keyboard.
a bit funny though, if i press the power button from the side to turn it off. I won't have any problem to turn it on.
but if i leave it to auto off mode, then i can't turn it on until resetting it from the back hole.
can it be improved if I flash to other ROM?
My Ameo does it occasionally - I find that (re)attaching the keyboard tends to bring it out of sleep better than pressing the power button. I get the impression that by pressing the power button, it sometimes gets confused that its still on and tries to turn itself off (even when it is already off). Tends to lead to a reboot every few days though. Waiting (fingers x'd) for WM6 to see if it behaves better.
do you guys have this option
settings>button>lock
try to toggle the checkbox to see if it helps
I'll try it! I found it under Settings/System Tab, 'Key Lock' icon.
I'll report back within the week.
I can confirm that it doesn't help my AMEO.
anyway, thank for your thought.
Digital.Diablo said:
I'll try it! I found it under Settings/System Tab, 'Key Lock' icon.
I'll report back within the week.
Click to expand...
Click to collapse
To digital:
can I ask for a favor from you. could you try to make the device auto power off without sim card in.
and see whether u will have the exact problem i have or more frequent it dead...
due to my unit is locked to T mobile network, i still haven't put any sim card in.
Tried it without simcard in but it still turns on ok after the fix. TBH, sounds like you're getting the issue more than me - mine only does it occasionally (once every couple-3days) and as yet, I've not managed to locate a consistent cause. I'll keep my eye on it though with the fix and let you all know how I get on.
the other thing that i can think of out of at the moment is that you are running some prog from the sd card/microdrive in the background so when you try to switch your device on then it does not get started and hence the problem...
try tweaks2k (you can use the trial version)
it has a bunch of settings for this... (just check that it is compatible with ameo first)
install 'screenoff' and assign to one of the button.
it works fine.
have to make work around like this now. no idea why this problem only happen to my AMEO...
anyway, thanks for all of u!
royalmail said:
Does someone have the same problem like me?
Click to expand...
Click to collapse
I have a similar problem. My device does not wake up in one case from 10 approximately.
Frequency of occurrence of a problem decreases if to close the phone's program compulsorily.
In other branch to me have told, that the problem can be because of the Active Sink's program. Have allowed advice to disconnect automatic start of this program. But I cannot check up because my program all the same is started if to switch off an option of the automatic device. :-(
hard reset can solve the problem completely. ;-)
I'm pleased to say that the 'button' tweak posted here has worked... So far!
Thanks Gents (and lasses if there are any).
That happened to me too yesterday.
I hard reset it and reinstalled everything to microdrive now. (trying to eliminate the possiblity of compaction thread) Removed SPB Pocket plus, which I've come to be quite suspecious by now. Also removed true VGA. So far I have not got a single freeze yet, touch wood. If it runs okay for a few more weeks with no freezing, will put back true VGA and see how it goes again. Will try to isolate the offending software bit by bit.
Hi,
I've had the same problem with my Advantage
After some weeks of test i have found how to solve the problem on my Advantage. perhaps it's only works on mine but you can try.
i have installed "all" progs on memory and not on microdrive. on microdrive i have only a few exe like wififofum or progs not intend to run when i turn my Athena off.
then no more problem waking up my athena.
I think the problem could be that microdrive cause a time out or thing like this when we wake up the PDA then athena freeze waiting about datas from microdrive.
then for me now it's programs like browsers, sscontact, traylaunchers etc .. => memory
programs like painting tool, etc ... => microdrive and close (kill process) them before sleep mode.
and all is ok now for me. The only freeze in 1 week was Pocket IE freezing (but the reason is pocket IE sucks)
There was actually another point that I forgot to mention concerning the freezing. I found out that the free miniSD card came with the bonus pack was actually faulty. With the pocket mechanic professional benchmark, I managed to see only less than 200kb/s read and write! I did a hard reset, and installed everything on microdrive, and touch wood, I have not got a single reset or freezing yet these two days. I install nothing into memory, as we all know that it takes up to 2 seconds to write a block of data into NOR ROM, which is why we should always shift our directory of IE cookies/history/cache away from the main memory. Since the main memory (NOR ROM) is good for executing program in place but terrible in writing, Microsoft's MikeCal thinks we should not keep any data there. (See this thread: http://blogs.msdn.com/windowsmobile/archive/2006/03/16/552996.aspx ). I try to keep the memory as free as possible to minimise compaction thread kikcing in. Will see how it goes in the next couple of weeks and take on from there.
I'm happy to confirm that, after a weeks testing, the button 'fix' seems to have resolved the issue! Thanks all.
I have been experiencing similar problems.
After being left on standby for a period of time (>10mins), the unit sometimes goes into "autistic" mode.
i.e:
Power button does not function. Unit GSM light flashes, but will not resume from sleep.
I've tried the following:
Attaching USB cable. No change.
Attaching keyboard. No change.
Calling phone. No change.
Soft reset. Starts ok.
I have now tried:
Settings/System/Key Lock
- set to 'Do not lock buttons'
However, I suspect ActiveSync.
The unit was attempting to Sync every 5 minutes, while connected with a USB cable. I therefore followed advise (read elsewhere) to create a dummy server to allow an ActiveSync schedule to be created, then deleted.
http://www.modaco.com/index.php?showtopic=246522
This is coincident with the start of the problem.
Regards
Devany said:
I have been experiencing similar problems.
After being left on standby for a period of time (>10mins), the unit sometimes goes into "autistic" mode.
i.e:
Power button does not function. Unit GSM light flashes, but will not resume from sleep.
I've tried the following:
I have now tried:
Settings/System/Key Lock
- set to 'Do not lock buttons'
Click to expand...
Click to collapse
I had same problem once I enabled Key Lock function.
However, once I disable key lock, it works fine again.
Hello,
I have three Polaris (O2 XDA Orbit 2) here that crash randomly.
a) Sometimes they just refuse to wake up pressing power. Screen stays black, right green network LED blinks normally (as if phone is registered correctly) but the phone is NOT reachable, the mailbox answers the call
b) the device resets and reboots without any obvious reason...
the mentioned problems occur once in 1 or 2 days, not really reproducible...
Does anybody have the same behaviour? Is it a problem of installed Software?
Additional Software installed:
AvantGo
GoogleMaps
TrendMicro Office Scan
PocketCM Contacts 0.19b
Memmaid
Sprite Backup
Resco Explorer 2007, FTP, Registry
WakeUp Tweak
Calendar+
Advanced Config 2.1
TomTom 6
Battery Status Plugin + Clock
What kind of configuration you did with the Advanced Config 2.1?? the others applications are on my phone too, except Battery Status Plugin + Clock and WakeUp Tweak
is there any option to export the config? Its hard to type everything...
WakeUp Tweak is necessary for Alarm Bug prevention (IMHO) and does only set 2 reg keys AFAIK
nobody who has the same issue?
Can DirectPush can be the reason? I am connected with an SBS 2003 Exchange almost all the time...
Thx for an help,
Hmm... I have the same issues and im am using direct push as well. I am going to disable direct push for a few days to see if that will solve the problems...
One more thing. Apart from direct push we are both using resco explorer 2007 but I don´t think that this has something to do with the problems.
I would try to uninstall batterystatus had the issue too had to do hardreset.
The Bleedin' Obvious...
Apologies if this is just too damn obvious to be of any use, but on earlier XDA models I have had problems with poor connections on batteries, so I would check:
1. That your SIM is clean and properly seated - reseat if necessary
2. That your battery terminals are making good contact with no potential obstructions and that it latches properly when closed
3. Try removing, cleaning and reinserting any SD card you may have inserted
That should eliminate any hardware-based causes. The only other thing that I recall having caused problems in the past (on the Artemis) was battery status - especially it's behaviour on boot (and wake??). Might be worth removing it for a bit to see if it makes any difference.
Good luck...there's always return to manufacturer - you might just have a dodgy unit?
Hi, I have the same problem as you (the first one only).
Do you use push mail palmbluetooth? I am trying to test if it has something to do with direct push. I turned it off right after yesterdays post and had no black screen or reboot since. But well... It will take some more days to figure if direct push and these problems are related.
exactly the same problem.
Hi,
I have exactly the same problem of hazardous reboot.
I have a Cruise with the SFR (Vodaphone French) ROM.
I have see it live twice while my phone was on my table without having touch it.
I'll test this like you without 3G a few days and let you know.
hardware is not be the reason, although its worth to check. But it happens also if the unit is laying on the table without touching it at all...
batterystatus is NOT the reason, had reboots without it installed, can someone verify?
Resco Explorer 2007 is NOT the reason, had reboots without it installed, can someone verify?
Direct Push is the open issue to check. Without this enabled, I have a stable unit for 32 days but I'll try many more since this was not so often...
Any comments are appreciated but its definitely NOT a faulty unit since all three of mine have the same issue. Faulty firmware? Faulty OS ;-)
CU
do you have bandswitch installed?
your is a software installed problem mate!
Report here all software installed, bye
Still no reboot or hang since disabling direct push... I did not change something else and had reboots or hangs nearly every day. Would be great to know if it is really direct push/active sync...
same with my device, I think DirectPush is the reason. Can somebody else confirm?
You guys mean to tell me that direct push, which is built into the OS and is a major component of AS on the device for years doesn't work? Come on now. I refuse to believe it. If it truly caused instability like you guys say, that would be an even BIGGER issue than the lack of video drivers!
If anything, there must a software conflict going on that is causing the instability. As a true test, try hard resetting and without installing anything, turn on AS push. Wait a day and let us know what happens.
I'll be getting my TC tomorrow and loading it up to the hilt, including setting it up for my 4smartphone account.
Well... It may sound strange but I really start to belive that this is a direct push issue. I did not have these reboots and hangs right from the start and thought about what I have done before getting the problems. I uninstalled a lot of software and nothing changed. After reading the post of avoigt about direct push I remembered that I did enable this right before the issues started. On the other hand I would not bet all my money that it is really direct push causing the problems but it is the No.1 candidate now.
I am not willing to do a hard reset right now and test just direct push course I need some of the installed components for my working days. I hope someone else is able to test that. I would even offer my exchange server for testing...
Exactly the same problem (Polaris hangs or reboots) several times a day. Removed Direct Push and have not had a problem in three days. I set the schedule in ActiveSync to every five minutes. Also changed the GPRS connection to "Always on".
Same problem!!
My Polaris just cuts completely off a few times a day or screen goes black and can't awaken it. It was working fine for weeks and just started doing this.
I do have bandswitch installed and I do not use direct push.
EDIT: When I push on the battery it turns off. I hope its the battery and not the contacts.
Hi, same problem here.
The original version was the french ROM, and it worked for a week without any problem. (I have the phone for only one week). Last night I flashed it with a english version, and installed only 2 programs, skype and core player.
Facts:
1. if the phone is usb connected with the computer, it doesn't turn off.
2. if the phone is going in power save mode automatically refuses to turn back on by pressing the power button. It's like the display is disabled. If I call my number when is down like this, from the phone that I am calling from I can here the call, but the HTC doesn't ring.
3. it goes off after about 2 minutes if is innactive, and I can turn it back on only by reset. If I am using the phone (playing, browsing, etc.) it doesn't turn off.
I guess it's a soft problem. (but then again, I'm just a beginner user with this phone)
Does anyone has a solution for this?
Thanks
Hi guys,
Having an issue with my Note 4 (SM-N910F) international version since the MM 6.0.1 update. I received a further update after the MM 6.0.1 recently and thought the issue would've been fixed but alas, no!
Current version of Software: N910FXXS1DPE7.
Issue is, I have power saving mode turned on and set to: Start power saving "Immediately". However it keeps getting turned off and the screen becomes bright and I could not recognise a pattern how this occurs.
Things tried so far:
-Unticked automatic brightness and dragged all the way to low.
-Smart stay was/is never ticked.
-Auto adjust screen tone is ticked, but unticking that and also leaving automatic brightness turned off still causing power saving to automatically turn off.
-I have tried to check for this issue in Safe mode and it still happens.
Any ideas of what could be causing this? I do not want to do a factor reset for this issue and if it can be avoided after all. Safe mode is somewhat similar isn't it?
I have noticed the issue occur when I start using Gmail app (not the Inbox one), but that is just one scenario.
It seems like the light sensor gets triggered when it faces bright light and turns off power saving mode and screen becomes bright, but just could be a red herring.
Thanks a million!
Bharath
corpuscallosum said:
Hi guys,
Having an issue with my Note 4 (SM-N910F) international version since the MM 6.0.1 update. I received a further update after the MM 6.0.1 recently and thought the issue would've been fixed but alas, no!
Current version of Software: N910FXXS1DPE7.
Issue is, I have power saving mode turned on and set to: Start power saving "Immediately". However it keeps getting turned off and the screen becomes bright and I could not recognise a pattern how this occurs.
Things tried so far:
-Unticked automatic brightness and dragged all the way to low.
-Smart stay was/is never ticked.
-Auto adjust screen tone is ticked, but unticking that and also leaving automatic brightness turned off still causing power saving to automatically turn off.
-I have tried to check for this issue in Safe mode and it still happens.
Any ideas of what could be causing this? I do not want to do a factor reset for this issue and if it can be avoided after all. Safe mode is somewhat similar isn't it?
I have noticed the issue occur when I start using Gmail app (not the Inbox one), but that is just one scenario.
It seems like the light sensor gets triggered when it faces bright light and turns off power saving mode and screen becomes bright, but just could be a red herring.
Thanks a million!
Bharath
Click to expand...
Click to collapse
I have just one problem like yours. When i receive Marshmallow i just update. But Power Saving turns off every reboot. Just back to factory settings and make your wipes. I solve this with wipes and factory.
Tavok said:
I have just one problem like yours. When i receive Marshmallow i just update. But Power Saving turns off every reboot. Just back to factory settings and make your wipes. I solve this with wipes and factory.
Click to expand...
Click to collapse
Thanks. Yeah I am trying to avoid factory reset because can't go thorugh the process of installing apps, setting up all the various accounts etc especially since there is no built in fully restorable backup feature. Family man with kids and have enough IT stuff to do at work.
I'm on stock/non-rooted device also. And this will be my last Samung device, if not the last Android!
I understand you very well. You can use HELIUM apk to make your nandroid backups without root and make easier this tedious work. I don't have rooted my phone but helium makes all faster that, and i use also wondershare mobile go for android and PC.
I hope this helps you and you can resolve your problem. Good luck and regards from Switzerland - (Mexico)
Tavok said:
I understand you very well. You can use HELIUM apk to make your nandroid backups without root and make easier this tedious work. I don't have rooted my phone but helium makes all faster that, and i use also wondershare mobile go for android and PC.
I hope this helps you and you can resolve your problem. Good luck and regards from Switzerland - (Mexico)
Click to expand...
Click to collapse
Thanks Tavok. I did download Helium and wanted to test it out, however my phone is now staying in Power Saving mode since a few days! I have done nothing new, didn't uninstall any app or change any settings as such for it to work. This is bugging me because I want to know what fixed it so that I can re-apply the fix again if need be.
I've also read that some people are complaining about Note 4 getting stuck in Power Saving mode and I hope this is not the case with mine, now that it seems to work as expected.
I will update this thread once I check it out further.
I found out how this power saving mode gets turned off. It is the Location settings. If location is off, the power saving mode stays on (this is what it was set to hence I didn't see the issue happening). But when I changed it back to High accuracy, I started to notice the power saving getting turned off from time to time when using certain applications that require Location accuracy.
This is a bug since the MM update!!
Any ideas how to use Location accuracy and still retain Power saving mode?
I did a factory reset and the issue persisted! I tried various location settings(of the 3 choices) asks none of them helped. When set to any one of them power saving automatically turns off after a while I.e. when location needs to be detected. The only workaround us to turnoff location altogether but that messes with the auto sync of accounts! Grrrrrrrr
I verified with Samsung Tech Support that Location and Power Saving are incompatible on the Galaxy Note 4, even with the latest Android version available for the device (6.0.1) . In other words, Turning on Location while Power Saving is active will disable Power Saving after a short period. Fortunately, the problem is fixed on later devices.