Database Users

Im so scared...!!

I just bought a t-mobile wallaby from here in india, And i decided there was a update available after 3.14 or something. so i ran it. But it stopped in the middle. Said 20 min but waited an hour. Then i took the xda of its cradle and did a hard reset... Now all it does is switches on and show t-mobile and the light stay on...nothing after that. I think i really messed it up. Gave it to a guy who said he could fix it but now 4 days later says he cant. Really need help on how to do it myself Please. Please help me, cant throw money away like that......can some show me step by step instructions as i am stupid with upgraded or reinstalling this device.

why have you decided that you could upgrade your device if you don't understand anything to upgrading and its consequences.
Upgrading is *dangerous* for dummies.
You are the weak link[/list]

mananmistry said:
I just bought a t-mobile wallaby from here in india, And i decided there was a update available after 3.14 or something. so i ran it. But it stopped in the middle. Said 20 min but waited an hour. Then i took the xda of its cradle and did a hard reset... Now all it does is switches on and show t-mobile and the light stay on...nothing after that. I think i really messed it up. Gave it to a guy who said he could fix it but now 4 days later says he cant. Really need help on how to do it myself Please. Please help me, cant throw money away like that......can some show me step by step instructions as i am stupid with upgraded or reinstalling this device.
Click to expand...
Click to collapse
:x Forget what this guest just said we are a community who help each other out :x
I am now using the XDAII but when i had the XDA1 i had a similar problem. Got stuck upgrading. Hang onto your horses dude your device isn't dead so breath a sigh of relief. If you have a SD/MMC Card reader then use it to burn the base Rom from
http://lumpistefan.dyndns.org and then install it through the boot loader(Hold the Power button and then press the soft reset button using the stylus(you will enter the boot loader mode and then follow the instructions on how to install the Rom.
------------------------------OR--------------------------------------------
Go to a shop or a friend who had similar device, make sure you have a SD/MMC card with you and then enter the bootloader mode as described above and then copy the ROM on the SD Card. Then insert the card in your device and again enter the Boot Loader mode and Copy the Rom from the SD Card to your device after you are done press the Hard reset button on your device to switch it off keep it off for atleast 60 sec before pressing the hard reset button again to switch it on. Your device will live again.
[/b]A WORD OF ADVICE
Don't touch the Radio Stack on either your device or the other one. Always select Rom only.
If you need further help with using the bootloader search these forums you'll come up with alot of info.
Let me know how it works out

one question
Thanks for the advice.....your must be the better part of the site.
what happens if i cannot get into the boot loader.
thanks again

Re: one question
mananmistry said:
Thanks for the advice.....your must be the better part of the site.
what happens if i cannot get into the boot loader.
thanks again
Click to expand...
Click to collapse
I believe there's a way to go-back! Do a flush by pressing on the power button+the hard reset+the navigation button pressed. All at once and that's how you go-back to the original ROM. Let me know if it works and if you dare to do it anyways.. 8)

guest said:
why have you decided that you could upgrade your device if you don't understand anything to upgrading and its consequences.
Upgrading is *dangerous* for dummies.
You are the weak link[/list]
Click to expand...
Click to collapse
Mr. Guest you are an idiot, many of us have been at this point one time our another. This is no way to respond to a forum member in need of help.

i'm no techie when it comes to these things but just out of curiousity WHAT causes the upgrade to stop? mananmistry said he was in the middle of upgrading already; is it the rom he used or is it the connection (power flux, cable, sync, etc)? just curious... :wink:
oh and its beers for the others and the loo for the guest

update
now the thing is i got the phone back. I have connected the usb but pc cannot find device and xdatools or the rom .exe files wont install. it says "xda not found via activesync", something like that. I went into the boot loader and it said GSM ERROR and stops. have to press calender key to get into sub-menus. what is the problem. does the rom kitchen .exe files need sactive sync to be present. please can some one tell me.
do i need a sd card reader. can i not just use someone phone to put my sd card and burn onto sd...??

You are now in serious trouble, the GSM error often proves fatal for the phone. You can still flash the rom though by following the previous instructions. After that is completed you will have to try flashing a radio stack. Please be prepared to be disappointed, I wish you the best of luck. The good news is that even if the phone doesnt work you should still have a working pda.

Where can i get a radio stack rom...???
Click to expand...
Click to collapse

where can i get a radio stack rom....will try...
If my gf has a pda with sd card can i use the unit to see the sd card and write the rom on it???

Re: update
mananmistry said:
now the thing is i got the phone back.
Click to expand...
Click to collapse
how did U get the phone back 2 work (bootloader)
thanks
:?:

get a radio stack from here
http://lumpistefan.dyndns.org/tools/

HTC TOUCH HD2 Help Please

Hi, All
It has been more then a few days trying to remove HSPL from my HD2. Numerous post & even watch a Youtube video to make sure I was doing everything right & still no success.
I really need to get this over and done with as I am posting the phone tomorrow.
I was wondering if anyone could walk me through on how to create a Gold Card & flash my HD2 back to Stock. Even if I have to pay for this I will.
My HD2 is a Sim Free Non Branded UK spec Phone
Please help.
Thanks
JAW$

JAW$ said:
Hi, All
It has been more then a few days trying to remove HSPL from my HD2. Numerous post & even watch a Youtube video to make sure I was doing everything right & still no success.
I really need to get this over and done with as I am posting the phone tomorrow.
I was wondering if anyone could walk me through on how to create a Gold Card & flash my HD2 back to Stock. Even if I have to pay for this I will.
My HD2 is a Sim Free Non Branded UK spec Phone
Please help.
Thanks
JAW$
Click to expand...
Click to collapse
1. you download the stock rom of your choice (Stock Roms include Radio)
2. Copy the ruu_signed.nbh file to your storage Root and rename to LEOIMG.nbh
3. Fire Up your Leo by pressing power on+vol down untill bootloader comes
4. if all goes well it will ask you to press power on to flash your device
5. do what it says
when finished hard reset (by pressing red button in back or power on+vol up+vol down)
then you should be fine and on your boring stock way again

Tokolosh said:
1. you download the stock rom of your choice (Stock Roms include Radio)
2. Copy the ruu_signed.nbh file to your storage Root and rename to LEOIMG.nbh
3. Fire Up your Leo by pressing power on+vol down untill bootloader comes
4. if all goes well it will ask you to press power on to flash your device
5. do what it says
when finished hard reset (by pressing red button in back or power on+vol up+vol down)
then you should be fine and on your boring stock way again
Click to expand...
Click to collapse
Hi,
I have already tried that & tried using different memory cards/different roms, different Format methods etc . But still can't get into Bootloader screen.
This is the reason I posted this thread.
Thanks
JAW$

JAW$ said:
Hi,
I have already tried that & tried using different memory cards/different roms, different Format methods etc . But still can't get into Bootloader screen.
This is the reason I posted this thread.
Thanks
JAW$
Click to expand...
Click to collapse
youve been given the same answer now in several threads. Its probably time to give us more information. because the answer we have all given you is the only way to remove hspl.
So, since you keep saying it wont work, it can only be either
1 a problem with the sd card
2 a problem with the sd card socket on your phone
or
3 a problem with the leoimg.nbh image you are using.
so, question 1 - is your phone rom locked to the provider? (can you download roms from the htc website using your correct serial number?)
question 2 - when you are formatting teh sd card, are you formatting it inside the phone or in your pc?

Closed - duplicate thread.
WB

[q] help me my phone is not booting

HALLO ALL,
i install hspl2 on t mobile htc hd 2 then i try to flash my phone with 1.66.405 rom.after that my mobile is not booting did i brick my phone or it can be recoverd........sorry for my poor english..help me friends

Is it a t-mo USA device? If so.. yes it's bricked.
When you say it wont boot do you mean you can power it on but it wont get past the splash screen? Or it just streight up wont power on?

Same as he said.. Does it power on? Power = good. Somtimes units will only power on when plugged into usb / charger. If this is the case, when it boots up go into boot rom by pressing vol down and reset in the back. When the tri color screen loads and says USB. Flash to a official rom such as the tmobile one.

man if you instaled 1.66 he is bricked i did the same with mine a big f mistake , but i fix it with cost , but is very hard to find service that will fix it , it just need a resurection ... if you still have the phone contact me. maybe i can help

Hey, the same happened for me..
When I put in my battery, it turns on automatically, shows the HTC screen, but never boots. Anyways, before it turns on automatically, I managed to do a light and a hard reset too, non of them is working.
Please, if somebody knows the way to fix it, contact me here or on my mail, [email protected]
I'll be waiting for you messages!

rvida said:
Hey, the same happened for me..
When I put in my battery, it turns on automatically, shows the HTC screen, but never boots. Anyways, before it turns on automatically, I managed to do a light and a hard reset too, non of them is working.
Please, if somebody knows the way to fix it, contact me here or on my mail, [email protected]
I'll be waiting for you messages!
Click to expand...
Click to collapse
Yours is totally different problem, and you should try flashing stock rom from sd.

Could you help me with that?
'Cause I don't even know where to start basically...

rvida said:
Could you help me with that?
'Cause I don't even know where to start basically...
Click to expand...
Click to collapse
Take a image from the original ROM Say Vodafone, T-Mobile (your operator)
Extract the file, for me it is : "RUU_Leo_Vodafone_NL_1.72.172.0_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship"
Use Winrar to extract this file : RUU_signed.nbh maybe called different but look for the biggest file extracted.
I hope you have a MicroSD
Rename
RUU_signed.nbh to leoimg.nbh put it on the MicroSD card
Put the MicroSD in the Phone,
Press down the Volume (left side) like you want less sound out of your phone
Press same time the Power On button hold it down until you see a bootloader
Now your ready to reflash original rom from the MicroSD
use HSPL 2.08 to load the not branded roms to the divice
Hope it works,
When you have Power in the phone then it wil work for sure
Ariebombarie

Brick HD2 ,I've only htc logo without red info

Hi,I bought an htc hd2 that show only HTC green logo without red information. The seller told me that He bricked it flashing a rom (that I don't know if it is a wrong rom). What should I do ? Thanks in advance

Try pushing vol up + en power button when the phone is off. What do you get then?

What should I push ? vol up and end call ?

hold vol down, tap and release power.

i cant say for certain whether yours is the same as the situation i had, but my original hd2 wouldnt boot and would only show a white screen with the green HTC and none of the rom/radio info in red in the bottom corner..it ended up being toast and had to be replaced under warrenty. not saying yours is, but thats what happened with mine.

Razorbacktrack5535 said:
Hi,I bought an htc hd2 that show only HTC green logo without red information. The seller told me that He bricked it flashing a rom (that I don't know if it is a wrong rom). What should I do ? Thanks in advance
Click to expand...
Click to collapse
Wrong rom? Probably - wrong radio... Congrats! You bought a nice paperweight.

I had the same a week ago. I had my phone for just 2 hours, then it suddenly stopped working when I restarted it. My HD2 wouldn't boot and did only show the white screen with HTC logo. I tried to do a hard/soft reset, and I even updated the rom, but nothing worked. I't happened because I was removing a app in the Windows Mobile Device centre and it crashed. My phone is now in repair.

Follow the 2nd part of this guide:
http://www.htc.com/europe/howto.aspx?p_id=297&id=182
Had the same prob with op and kept sticking at white logo htc and didn't progress any further. Just do that guide and phone will return back to normal.

Razorbacktrack5535 said:
Hi,I bought an htc hd2 that show only HTC green logo without red information. The seller told me that He bricked it flashing a rom (that I don't know if it is a wrong rom). What should I do ? Thanks in advance
Click to expand...
Click to collapse
Download from HTC site the original ROM from you phone using the serila number under the battery. Unzip it in some directory. Rename the file RUU_signed.nbh to LEOIMG.nbh. Put the SD card from your phone in the computer, format it to FAT32 and copy LEOIMG.nbh file to the rot directory of SD card. Put the card back in phone (phone should be switched off). Then put phone in boot loader: push and hold VOLUME DOWN button and push for short the POWER button, keep holding VOLUME DOWN button until bootloader starts (4 colors screen). Follow the instructions on screen. The phone will be flashed with the original SPL, ROM & Radio from the file LEOIMG.nbh on SD card.
After that it should work normally. After flashing perform hard reset.
Note that battery should be well charged before flashing.
If above does not work your phone probably has hardware defect which could be rectified only in service by changing of some PCB inside. I had similar problem but not related to flashing and service changed power PCB (on warranty).

@AndrewSh
The seller tell me that he flashed a rom from emulr

Razorbacktrack5535 said:
@AndrewSh
The seller tell me that he flashed a rom from emulr
Click to expand...
Click to collapse
You know - English is not my native so can you please be more specific - what do you mean by emulr - emulator or anything else?
Anyway - open the battery rear cover, find the Reset (bottom left), press and hold Volume down and push reset with a stylus or pen or whatever, holding Volume down. It will try to enter to bootloader mode. Do not release Volume down until the three-color picture will appear on screen.
Read what you see and write down here....

Sorry I made an error. I would say emule ,the filesharing program

If you can see the HTC logo your device isn't bricked.
This means that SPL is still alive and working. You only need to enter bootloader mode and flash a FULL RUU.

@kholk
Can you tell me what should I do ? Can you give me the link to the files that I need?

kuwait said:
Download from HTC site the original ROM from you phone using the serila number under the battery. Unzip it in some directory. Rename the file RUU_signed.nbh to LEOIMG.nbh. Put the SD card from your phone in the computer, format it to FAT32 and copy LEOIMG.nbh file to the rot directory of SD card. Put the card back in phone (phone should be switched off). Then put phone in boot loader: push and hold VOLUME DOWN button and push for short the POWER button, keep holding VOLUME DOWN button until bootloader starts (4 colors screen). Follow the instructions on screen. The phone will be flashed with the original SPL, ROM & Radio from the file LEOIMG.nbh on SD card.
After that it should work normally. After flashing perform hard reset.
Note that battery should be well charged before flashing.
If above does not work your phone probably has hardware defect which could be rectified only in service by changing of some PCB inside. I had similar problem but not related to flashing and service changed power PCB (on warranty).
Click to expand...
Click to collapse
Did u even tried that? I am 99% sure that that will work!

Razorbacktrack5535 said:
@kholk
Can you tell me what should I do ? Can you give me the link to the files that I need?
Click to expand...
Click to collapse
I told you what to do and what to write here afterward. Then we will see what to do after you read your current SPL info....

Hi,
I tried to power on the phone after some days and it didn't show nothing,black screen.I opened It and the "power keyboard" was broken in two parts (the connector and the keyboard).So I bought a new one and The phone doesn't want to show something.What should I do ? Please,Please help me :'(

Up :'( Please help me

Little Up :'(

Razorbacktrack5535 said:
Hi,
I tried to power on the phone after some days and it didn't show nothing,black screen.I opened It and the "power keyboard" was broken in two parts (the connector and the keyboard).So I bought a new one and The phone doesn't want to show something.What should I do ? Please,Please help me :'(
Click to expand...
Click to collapse
When I first started reading posts in this thread i thought you had some hope, but now, your device is officially bricked
Send it in for repair, even without warranty . You have to, unless you know how to fix it. Sorry

[Q] Wildfire SDCard Update .. Help

I have t-mobile UK unrooted + simlocked
When i power on phone .. Round red icon comes on screen , then HTC logo & some music , then again tmobile logo comes & move a little & phone hangs there .. not going forward
Hard reset not helping
i have downloaded this rom
RUU_Buzz_Froyo_HTC_WWE_2.22.405.1_signed hboot + radio removed .
I make a gold card & rename it to update.zip but updating not starts
HELP
i am a newbie in this
Thanks

anyone know which name to be set in update file

Who can help me here ?

You don't need to rename it to update.zip, just select install zip from sd card.

Download the right rom from shipped rom for your phone and run it from your PC
I don't think you can use the file you mentioned above as your phone is not rooted ( I might be wrong)

foxy6800 said:
Download the right rom from shipped rom for your phone and run it from your PC
I don't think you can use the file you mentioned above as your phone is not rooted ( I might be wrong)
Click to expand...
Click to collapse
Tmobile UK Shipped Rom for wildfire .. i am searching for last 2 days but did not get it ..

http://shipped-roms.com/shipped/Buzz/
tmo stand for T Mobile ( I think)

foxy6800 said:
http://shipped-roms.com/shipped/Buzz/
tmo stand for T Mobile ( I think)
Click to expand...
Click to collapse
Thanks
let me download & check it up
RUU_Buzz_TMO_UK_1.14.110.1_Radio_13.45.55.24_3.35.15.19_release_130442_signed.exe
is this supports rooting ?

Update comleted by Shipped Rom
but still same position
Round red icon comes on screen , then HTC logo & some music , then again tmobile logo comes & move a little & phone hangs there .. not going forward
so the problem is related to any H/W issue ?

http://img703.imageshack.us/img703/4314/82699533.jpg
this is the condition on phone

what type of forum is this ??
no one reply's ??? Just reading ... Ugghhhh

Have you tried holding the volume key down and switching on the phone
then facotry rest

yes offcourse ... Hard reset was always my first step ..
update with shipped tmobile uk rom .. Then hard reset again but still same

Can you not run unrevoked?
Sent with love from f0xy while mobile!

how can i unrevoked it if USB debugging is not ON ... ...
i think problem is from h/w b/c if shipped rom is flashed OK & phone still have same problem then it must be hardware problem