Hi,I bought an htc hd2 that show only HTC green logo without red information. The seller told me that He bricked it flashing a rom (that I don't know if it is a wrong rom). What should I do ? Thanks in advance
Try pushing vol up + en power button when the phone is off. What do you get then?
What should I push ? vol up and end call ?
hold vol down, tap and release power.
i cant say for certain whether yours is the same as the situation i had, but my original hd2 wouldnt boot and would only show a white screen with the green HTC and none of the rom/radio info in red in the bottom corner..it ended up being toast and had to be replaced under warrenty. not saying yours is, but thats what happened with mine.
Razorbacktrack5535 said:
Hi,I bought an htc hd2 that show only HTC green logo without red information. The seller told me that He bricked it flashing a rom (that I don't know if it is a wrong rom). What should I do ? Thanks in advance
Click to expand...
Click to collapse
Wrong rom? Probably - wrong radio... Congrats! You bought a nice paperweight.
I had the same a week ago. I had my phone for just 2 hours, then it suddenly stopped working when I restarted it. My HD2 wouldn't boot and did only show the white screen with HTC logo. I tried to do a hard/soft reset, and I even updated the rom, but nothing worked. I't happened because I was removing a app in the Windows Mobile Device centre and it crashed. My phone is now in repair.
Follow the 2nd part of this guide:
http://www.htc.com/europe/howto.aspx?p_id=297&id=182
Had the same prob with op and kept sticking at white logo htc and didn't progress any further. Just do that guide and phone will return back to normal.
Razorbacktrack5535 said:
Hi,I bought an htc hd2 that show only HTC green logo without red information. The seller told me that He bricked it flashing a rom (that I don't know if it is a wrong rom). What should I do ? Thanks in advance
Click to expand...
Click to collapse
Download from HTC site the original ROM from you phone using the serila number under the battery. Unzip it in some directory. Rename the file RUU_signed.nbh to LEOIMG.nbh. Put the SD card from your phone in the computer, format it to FAT32 and copy LEOIMG.nbh file to the rot directory of SD card. Put the card back in phone (phone should be switched off). Then put phone in boot loader: push and hold VOLUME DOWN button and push for short the POWER button, keep holding VOLUME DOWN button until bootloader starts (4 colors screen). Follow the instructions on screen. The phone will be flashed with the original SPL, ROM & Radio from the file LEOIMG.nbh on SD card.
After that it should work normally. After flashing perform hard reset.
Note that battery should be well charged before flashing.
If above does not work your phone probably has hardware defect which could be rectified only in service by changing of some PCB inside. I had similar problem but not related to flashing and service changed power PCB (on warranty).
@AndrewSh
The seller tell me that he flashed a rom from emulr
Razorbacktrack5535 said:
@AndrewSh
The seller tell me that he flashed a rom from emulr
Click to expand...
Click to collapse
You know - English is not my native so can you please be more specific - what do you mean by emulr - emulator or anything else?
Anyway - open the battery rear cover, find the Reset (bottom left), press and hold Volume down and push reset with a stylus or pen or whatever, holding Volume down. It will try to enter to bootloader mode. Do not release Volume down until the three-color picture will appear on screen.
Read what you see and write down here....
Sorry I made an error. I would say emule ,the filesharing program
If you can see the HTC logo your device isn't bricked.
This means that SPL is still alive and working. You only need to enter bootloader mode and flash a FULL RUU.
@kholk
Can you tell me what should I do ? Can you give me the link to the files that I need?
kuwait said:
Download from HTC site the original ROM from you phone using the serila number under the battery. Unzip it in some directory. Rename the file RUU_signed.nbh to LEOIMG.nbh. Put the SD card from your phone in the computer, format it to FAT32 and copy LEOIMG.nbh file to the rot directory of SD card. Put the card back in phone (phone should be switched off). Then put phone in boot loader: push and hold VOLUME DOWN button and push for short the POWER button, keep holding VOLUME DOWN button until bootloader starts (4 colors screen). Follow the instructions on screen. The phone will be flashed with the original SPL, ROM & Radio from the file LEOIMG.nbh on SD card.
After that it should work normally. After flashing perform hard reset.
Note that battery should be well charged before flashing.
If above does not work your phone probably has hardware defect which could be rectified only in service by changing of some PCB inside. I had similar problem but not related to flashing and service changed power PCB (on warranty).
Click to expand...
Click to collapse
Did u even tried that? I am 99% sure that that will work!
Razorbacktrack5535 said:
@kholk
Can you tell me what should I do ? Can you give me the link to the files that I need?
Click to expand...
Click to collapse
I told you what to do and what to write here afterward. Then we will see what to do after you read your current SPL info....
Hi,
I tried to power on the phone after some days and it didn't show nothing,black screen.I opened It and the "power keyboard" was broken in two parts (the connector and the keyboard).So I bought a new one and The phone doesn't want to show something.What should I do ? Please,Please help me :'(
Up :'( Please help me
Little Up :'(
Razorbacktrack5535 said:
Hi,
I tried to power on the phone after some days and it didn't show nothing,black screen.I opened It and the "power keyboard" was broken in two parts (the connector and the keyboard).So I bought a new one and The phone doesn't want to show something.What should I do ? Please,Please help me :'(
Click to expand...
Click to collapse
When I first started reading posts in this thread i thought you had some hope, but now, your device is officially bricked
Send it in for repair, even without warranty . You have to, unless you know how to fix it. Sorry
Related
Hello. First I want to thank all of you who develop roms and the like. I have had such a blast over the past month and a half customizing my phone in ways I never thought possible. Last night I ran flashaholicruu.exe on my HTC HD2 Leo. The task29 seemed to work properly, however when I attempted to flash the rom I received errors. I tried Leo_Radio_2.11.50.26.sfx, which had previously worked on my phone. It stopped at 96%. I did the recovery, however the phone now will not even boot the splash screen. It simply vibrates non-stop when I turn it on until I remove the battery. Does anyone have ANY advice at all? Am I able to load a ROM onto the SD card and directly boot from it while my phone is in this state?
I have removed the battery and reinserted it. Did not work.
I have also tried pressing the volume buttons and the power on button to get the bootloader, but just vibrates in the same manner as when I press on button.
Please help!
Thank you
happend to me with a friends phone...i jus replaced it under insurance
Nismo300zx said:
happend to me with a friends phone...i jus replaced it under insurance
Click to expand...
Click to collapse
Ahh. I wish. T-Mobile is giving me a hard time about replacing it because I was not the original owner of the phone. The phone is only about 3-4 months old though.
I had this happen to me.
Try to load it directly into bootloader by holding vol-down when you press power button, then flash another radio (i recommend 2.12.5) then try another ROM thru RUU.
Also, make sure your battery is place in there securely and that all 3 pins from the phone are sticking out.
I had a situation where one of the pins was sticking vertically and the battery was only hitting 2 (from doing too many battery pulls) and it did this weird vibrate splash screen boot sequence.
electrokitten said:
Ahh. I wish. T-Mobile is giving me a hard time about replacing it because I was not the original owner of the phone. The phone is only about 3-4 months old though.
Click to expand...
Click to collapse
You'll need contact details for the original owner, but by law they have to honor the agreement they put in place with them, regardless of whether you are that person or not.
Just get back onto T-Mobile and if they say no then speak to someone higher up. I know this to be the case after selling a palm pre to someone at the beginning of the year and it died on him shortly after.
johncmolyneux said:
You'll need contact details for the original owner, but by law they have to honor the agreement they put in place with them, regardless of whether you are that person or not.
Just get back onto T-Mobile and if they say no then speak to someone higher up. I know this to be the case after selling a palm pre to someone at the beginning of the year and it died on him shortly after.
Click to expand...
Click to collapse
Really? This is good to know. I contacted the original owner. I feel so bad and I hope he doesn't think I am trying to scam him. I just want a working phone and I think that T-Mobile should honor that.
orangekid said:
I had this happen to me.
Try to load it directly into bootloader by holding vol-down when you press power button, then flash another radio (i recommend 2.12.5) then try another ROM thru RUU.
Click to expand...
Click to collapse
I think the bootloader may be gone. Does the task29 remove this? I can't get even to the bootloader using the method above (I have tried many times).
orangekid said:
Also, make sure your battery is place in there securely and that all 3 pins from the phone are sticking out.
I had a situation where one of the pins was sticking vertically and the battery was only hitting 2 (from doing too many battery pulls) and it did this weird vibrate splash screen boot sequence.
Click to expand...
Click to collapse
Good to know, I will try this. I do have some bent pins.
No task 29 doesn't remove the bootloader, I always use it before flashing a new ROM...
Sent from my HTC HD2 using XDA App
copy the nbh file from the stock rom to the sd card..that usually fix it..
gabbs said:
copy the nbh file from the stock rom to the sd card..that usually fix it..
Click to expand...
Click to collapse
Good advice... Now if only he could access the bootloader he'd be sorted
gabbs said:
copy the nbh file from the stock rom to the sd card..that usually fix it..
Click to expand...
Click to collapse
Major_Sarcasm said:
Good advice... Now if only he could access the bootloader he'd be sorted
Click to expand...
Click to collapse
he needs to rename the .nbh file to LEOIMG.nbh and pair it with the RUU that came
with that same stock ROM
but then again, if he cant get into bootloader, the phone is definitely bricked
electrokitten said:
Hello. First I want to thank all of you who develop roms and the like. I have had such a blast over the past month and a half customizing my phone in ways I never thought possible. Last night I ran flashaholicruu.exe on my HTC HD2 Leo. The task29 seemed to work properly, however when I attempted to flash the rom I received errors. I tried Leo_Radio_2.11.50.26.sfx, which had previously worked on my phone. It stopped at 96%. I did the recovery, however the phone now will not even boot the splash screen. It simply vibrates non-stop when I turn it on until I remove the battery. Does anyone have ANY advice at all? Am I able to load a ROM onto the SD card and directly boot from it while my phone is in this state?
I have removed the battery and reinserted it. Did not work.
I have also tried pressing the volume buttons and the power on button to get the bootloader, but just vibrates in the same manner as when I press on button.
Please help!
Thank you
Click to expand...
Click to collapse
What exactly did you do to try and enter bootloader mode? You said you pressed the volume 'buttons' and the power button but that combination would initiate a Hard Reset and not bootloader mode..
How to get into your Bootloader
1. Turn your phone off
2. Press and hold the VOLUME DOWN then Press and hold the POWER button. After about 3 seconds the tri-coloured screen should appear.
3. To exit Bootloader you need to remove your back cover and pull the battery out for a few seconds, then replace it and press the power button to reboot your phone.
If you cannot get into the bootloader with the above instructions then it looks like you have bricked your device somehow but im not sure exactly how you could do it as task29 doesnt touch HardSPL.
If you can get into bootloader then you can flash a rom back to your device using the sd card method in my guide *HERE*.
Mark.
HALLO ALL,
i install hspl2 on t mobile htc hd 2 then i try to flash my phone with 1.66.405 rom.after that my mobile is not booting did i brick my phone or it can be recoverd........sorry for my poor english..help me friends
Is it a t-mo USA device? If so.. yes it's bricked.
When you say it wont boot do you mean you can power it on but it wont get past the splash screen? Or it just streight up wont power on?
Same as he said.. Does it power on? Power = good. Somtimes units will only power on when plugged into usb / charger. If this is the case, when it boots up go into boot rom by pressing vol down and reset in the back. When the tri color screen loads and says USB. Flash to a official rom such as the tmobile one.
man if you instaled 1.66 he is bricked i did the same with mine a big f mistake , but i fix it with cost , but is very hard to find service that will fix it , it just need a resurection ... if you still have the phone contact me. maybe i can help
Hey, the same happened for me..
When I put in my battery, it turns on automatically, shows the HTC screen, but never boots. Anyways, before it turns on automatically, I managed to do a light and a hard reset too, non of them is working.
Please, if somebody knows the way to fix it, contact me here or on my mail, [email protected]
I'll be waiting for you messages!
rvida said:
Hey, the same happened for me..
When I put in my battery, it turns on automatically, shows the HTC screen, but never boots. Anyways, before it turns on automatically, I managed to do a light and a hard reset too, non of them is working.
Please, if somebody knows the way to fix it, contact me here or on my mail, [email protected]
I'll be waiting for you messages!
Click to expand...
Click to collapse
Yours is totally different problem, and you should try flashing stock rom from sd.
Could you help me with that?
'Cause I don't even know where to start basically...
rvida said:
Could you help me with that?
'Cause I don't even know where to start basically...
Click to expand...
Click to collapse
Take a image from the original ROM Say Vodafone, T-Mobile (your operator)
Extract the file, for me it is : "RUU_Leo_Vodafone_NL_1.72.172.0_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship"
Use Winrar to extract this file : RUU_signed.nbh maybe called different but look for the biggest file extracted.
I hope you have a MicroSD
Rename
RUU_signed.nbh to leoimg.nbh put it on the MicroSD card
Put the MicroSD in the Phone,
Press down the Volume (left side) like you want less sound out of your phone
Press same time the Power On button hold it down until you see a bootloader
Now your ready to reflash original rom from the MicroSD
use HSPL 2.08 to load the not branded roms to the divice
Hope it works,
When you have Power in the phone then it wil work for sure
Ariebombarie
Hello guys,
I got a HTC HD2 today from ebay, the seller has 100% feedback.
I have done a search about my problem but I dont wanna do anything wrong on the phone if the phone is faulty and send it back.
My situation was, I got the phone, inserted my SIMcard and set all the first settings. after 2min someone called me, when I answered the call couldnt hear anything and the phone was frozen :\ after few seconds the phone reboot itself and I waited 5min to see if turned back on, but didnt :\
I've tried pressing the yellow reset botton near the battery, I've tried hard reset.
And if I press VOL down and turn the handset on thats the info I get :
PB81120 SS-B3
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
and on the bottom of the screen says SERIAL, nothing else
I've got the phone from America (T-mobile) I'm in australia, melbourne
I've worked hard to get this phone and now when I got, could only use it for couple minutes
Please help me asap.
Thank you and sorry open other topic about it
Guessing its TMoUS HD2 Leo1024. BTW what rom is installed on it did you get to notice while you had it? Something is odd here you are not sharing with us how does it go and get stuck in that screen.
Well to be safe if you don't know flash it. So don't matter remove the battery and restart it and go to bootloader mode by pressing power button while holding down the bottom volume button. Then connect the device to your PC via USB mount and download and run HSPL or you can do it via stock rom go download 2.10 from WM dev archive thread.
I just got the phone today :\ the seller said to me the phone is the tmobile version 512mb. I'm a bit noob with HTC, Ive been with iphone until today. well, Im not sure which rom I had, but I think its LEO.
Ive tried all afternoon, I removed the battery out of the phone for 2 hrs, then tried again(without SIMcard) and the phone started up again as new settings and asked me to put my simcard in, so I removed the battery and put the simcard in, turned the phone on, it got stuck again in STICK TOGETHER screen
I dont wanna be inconvenient about all my questions, I just want my phone fixed :\
I couldnt do anything with the phone cos I set up the settings, after couple min got a call and the phone froze and it reboot it self stucking in STICKY TOGETHER screen. I was trying to flash it, but how can I sync my phone with windows 7? cos if I put in bootloader screen, it says USB at the bottom but WMDC says device not conected.
Do you have any solution for my problem?
thank you for your reply
Ahhh as you said TMobile I naturally thought it would be Leo1024(HD2-US) but now that you say its 512mb thats not TMobile you are using Leo512(HD2-EU). I had a feeling you flashed your rom as you flashed wrong one then.
So to verify post the HSPL and ROM data from where you got it from so we know. Also visually verify your actual device does it say TMobile on the top? does the button have colors? If both = yes its TMobile.
My phone has T-Moline on the top and has colors on the buttons. its definately t-mobile. I asked the seller and he said was 512, maybe he is wrong.
I havent done anything to the phone I cant flash cos I cant even conect with my computer the phone came from USA. I'm in australia
thank you
If it's a USA TMobile, then it's not the 512 version, and you need to flash only US TMO compatible ROMs or you could brick it.
When you say you tried a hard reset, how did you do that?
It should be when the phone is off you hold down both volume up and down, and keep them held down, then briefly press the power button but keep holding the volume buttons.
What happens when you do that?
Try to flash it through the sd card.
- Download the rom you want, uncompress the files, rename the nbh file to LEOIMG.nbh
(The original HTC rom files can be uncompressed too, even if they are .exe files - you will find a .nbh file inside)
- Copy this file to the root of the sd card.
- Reboot while pressing volume down.
It should start to flash the new rom.
That's what I called Hard reset
I'm doing it again and comes up a grey screen saying
This operation will delete all ur personal data, blah blah blah..
Press VolUp to restore manufacturer default, or press other keys to cancel
I pressed VolUp
..restore..completed
Press VolUp to bootup
Jeckas said:
That's what I called Hard reset
I'm doing it again and comes up a grey screen saying
This operation will delete all ur personal data, blah blah blah..
Press VolUp to restore manufacturer default, or press other keys to cancel
I pressed VolUp
..restore..completed
Press VolUp to bootup
Click to expand...
Click to collapse
Well if that appears to work, but doesn't, you could have a real problem there. Do what joooe suggested above - that's the only option you've got left, without sending it away for repair.
joooe said:
Try to flash it through the sd card.
- Download the rom you want, uncompress the files, rename the nbh file to LEOIMG.nbh
(The original HTC rom files can be uncompressed too, even if they are .exe files - you will find a .nbh file inside)
- Copy this file to the root of the sd card.
- Reboot while pressing volume down.
It should start to flash the new rom.
Click to expand...
Click to collapse
how can I know the right ROM for my phone, cos the seller is saying its t-mobile 512mb and @johncmolyneux says that t-mobile is 1024mb
I dont wanna brick my phone at all.
I'm from portugal but I'm in australia, let me know if you can help me flashing my phone detailed. regarding I'm noob about it :\
thank you
or what ROM do you recomend for me?
can I provide you more info about my phone? to get the right ROM for me.
thank you
AFAIK, if it says T-Mobile on it and it has coloured call buttons then it's a US TMobile. Only the US ones have coloured buttons, and they're all 1024MB ROM.
May be wise though to wait for someone else to confirm this, as you've got me doubting myself now!
what would happen if I install AFAIK rom and then my phone is 512mb? would brick my phone? I would be unable to use my phone anymore? thank you so much for all ur help guys
Jeckas said:
what would happen if I install AFAIK rom and then my phone is 512mb? would brick my phone? I would be unable to use my phone anymore? thank you so much for all ur help guys
Click to expand...
Click to collapse
I don't know if it's 100% bricked afterwards, but you do need to install a compatible ROM, made for your device, so you need to be sure which one it is. It's really not worth rushing this and trying to just install a ROM as you may irreparably damage your phone.
ok, I will follow ur advice
should I follow this thread?
http://forum.xda-developers.com/showthread.php?p=6894936#post6894936
how can I make sure is 512mb or 1024mb?
but it says :
1024LEOs (from T-Mobile with 1024ROM) ARE NOT SUPPORTED
but then if my phone is T-mobile with 1024ROM
I can follow this one yeh?
http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893
thank you very much
Like I said earlier, wait for a while and let someone confirm that it is indeed a 1024MB ROM, or you will probably brick it and not be able to fix it.
HSPL3 works on all types of HD2 though, so you can flash that. Those links are both actually the same thing.
Just don't flash a ROM until you know 100% that you have the right type.
It is the TMOUS 1024 LEO.
Go to the HTC website and download a T-Mobile USA ROM, you are required to enter the phone's serial number. This will guarantee that you only download a ROM that is suitable for your phone.
Since you really just want to test the phone then go for the 2.10 ROM.
Firstly press and hold the Volume Down button, then tap the power button. This will bring you into Bootloader Mode (as you previously have done). When you plug in the USB cable to the computer the 'Serial' on the phone's screen will change to 'USB'.
As an administrator run the ROM and just tick the box about activesync.
thank you.
can I provide more info about my phone? to make sure for everyone?
thanks
Jeckas said:
thank you.
can I provide more info about my phone? to make sure for everyone?
thanks
Click to expand...
Click to collapse
I was 99.9% sure and just wanted someone else to agree really.
Basically, US T-Mobile HD2 are the only ones in the world with green and red call/end-call buttons, and every US T-Mobile HD2 has 1024MB ROM. If the guy you bought it off said it was 512MB then that would explain why it's in its current condition. It sounds like he believed it to be a 512MB version, and flashed a bad ROM. It also sounds like he's palmed it off on you, believing it to be knackered.
As fred_up said, go the the HTC site and download an official ROM for that device. You should be able to install that with no issues and see if the phone definitely works or not.
Good luck mate
@fred_up
do I have to flash first with this HSPL3?
I have downloaded and the phone was detected I went just to the step to select HSPL version to install
the choices are :
2.08.HSPL
2.08.0000
what should I do first?
I will try to find the rom on HTC website.
thank you very much
I was trying to install blackSTONEhengeHyPerSlim_4_1 on my blackstone. I installed olinex and after that stored the nbh and exe file on the sd card and then through task 29 flashed it. The rom got successfully installed but now the phone is stuck at the bootup. It says
Checking Radio...
Checking protocol..
Checking Rom..
But now won't get to the next screen.Because of this i can't get to active sync. Please help..Pleaaaasseee
Did u follow the instructions completely, cause it worked fine for me and others... Do you have radio 1.14 or above installed? Did u try to reflash?
ok, no need to worry. Boot into bootloader. What is your SPL?
Yes i did follow the instructions. Now the phone won't bootup. I tried it with the volume down and power up method. Rom does get installed but then again it won't bootup..
Did you try Vol UP + Vol Down + Power ?
Yes i did try that after my phone got screwed up with test29 method but it shows nothing at all after successfully installing rom..:-s
no need to worry
always read read read and must read before flashing. I think your phone is quite ok. You does task29 to it. what is task 29 means. it means task29 will clean our device completely only splash screen displyaed, phone always stucked on this screen. it is very normal, it means you completyely cleaned your device. now you are ready to flash your device. do the following procedure--
1. remove the battery and reinsert it.
2. now turn on the phone while pushing volume down key.
then bootloader (tricolor screen) mode will be displayed. many times it will not come into bootloader and device normally starts and stuck on splash screen. the reason is simple, you didnt press volume down key properly, it happend many times to me also.
Now remove battery cover, remove battery and reinsert it, dont cover the battery, now take slylus & press volume down strip with the stylus. ( volume up & down keys are installed in battery cover, so when you push volume down key in flap open condition, it should be done by stylus.)
ok
push volume down by stylus & hold it and start the device, it will come in tricolor screen means bootloader mode, on the bottom screen it will show serial.
Now conect the device to the pc & bottom line on the screen will become serial to USB.
Now perform task28= means flash normal rom, do not perform task 29 again.
task29 will take 1 minute to flash while normal RUU will take about 7-8 minute.
try it and give feedback/
kulwant said:
Yes i did follow the instructions. Now the phone won't bootup. I tried it with the volume down and power up method. Rom does get installed but then again it won't bootup..
Click to expand...
Click to collapse
Have you flashsed a differnet radio ?
What you did is just Task29 your phone. Task29 needs something to flash in order to do its thing. Usually we flash radios (good ones obviously) because they are smaller than full roms. If you flash a full rom with Flash29, it will get erased after completion.
What you need to do now (since your phone now has no ROM installed) is boot it while pressing volume down to get to the bootloader, plug via USB and flash a rom using a "non-task29" flasher, like the standard BlackStoneCustomRUU.exe file that comes with basically every rom.
Hello thanks for replying my internet wasn't working but i did manage to boot my phone but now the touch stops working after. I know this as i press the volume button and the phone responds to that hence telling me it's not really freezed up. This is all what i did.
Stored .nbh file in the task 29 folder this is the rom version whose nbh file is used (RUU_Duttys_HD_V3.9__XT_Turbo_5.2.21051.1.6.4_1.59.709.0_Radio_52.62.25.34_1.14.25.24_)
After the flashing is done i reset the phone by taking out battery and starting it again in bootloader.
Now i flashed again with (blackSTONEhengeHyPerSlim_4_1)
After installing it completely the touch stops responding.
Kindly help me with what seems to be the problem. Thanks
kulwant said:
Hello thanks for replying my internet wasn't working but i did manage to boot my phone but now the touch stops working after. I know this as i press the volume button and the phone responds to that hence telling me it's not really freezed up. This is all what i did.
Stored .nbh file in the task 29 folder this is the rom version whose nbh file is used (RUU_Duttys_HD_V3.9__XT_Turbo_5.2.21051.1.6.4_1.59.709.0_Radio_52.62.25.34_1.14.25.24_)
After the flashing is done i reset the phone by taking out battery and starting it again in bootloader.
Now i flashed again with (blackSTONEhengeHyPerSlim_4_1)
After installing it completely the touch stops responding.
Kindly help me with what seems to be the problem. Thanks
Click to expand...
Click to collapse
Hi mate.
I did somthing for you....so i hope it will helps you.
1. download file from this link. http://hotfile.com/dl/115059516/5623431/Radio_1.13.xx(original_hd_nbh)__task29.rar.html and after unrar.
2. Make task 29 with this one. (Nothing change in that unrar folder)
3. After finished T29, take uot battery, put it back, put device to BootLoad. screen.
4. Connect with PC again and flash your desided ROM. (it means if you choice your rom, after unrar or unzip, Rom has own folder with that all files ...BLACIMG.nbh, BS_CustomRUU.exe, etc......
thanks i'll just download and do it..Will definitely post in what happened...Thanks a tonne for the quick response..
kulwant said:
thanks i'll just download and do it..Will definitely post in what happened...Thanks a tonne for the quick response..
Click to expand...
Click to collapse
...It's ok mate, like i wrote, i hohe, it 'll helps you.
let me know after....
Any new good looking rom you would suggest for me to try that would be bugfree ???
kulwant said:
Any new good looking rom you would suggest for me to try that would be bugfree ???
Click to expand...
Click to collapse
.... for beginning: T29 finished ok?
for your guestion: Hmmmm, for me...really good ROM is from Cloudyfa, but objectively, it's up to you, which one from this site you choice.
The link you gave me says
This file is either removed due to copyright claim or is deleted by the uploader.
:-s
kulwant said:
The link you gave me says
This file is either removed due to copyright claim or is deleted by the uploader.
:-s
Click to expand...
Click to collapse
Yeas mate, i deleted it. I was thinking, that you download this file already and saved it to your PC.
LoL it's all cool it takes a while i got 512kbps..I got the stock rom from xda page
RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.3 4_1.13.25.24_Ship.exe
This one's fine right
kulwant said:
LoL it's all cool it takes a while i got 512kbps..I got the stock rom from xda page
RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.3 4_1.13.25.24_Ship.exe
This one's fine right
Click to expand...
Click to collapse
Yes that one is fine. Once T29 is complete take out battery and then re-insert it. Now put phone into bootloader (hold vol down and press power on while still holding vol down. BOOTLOADER IS A TRI-COLOUR SCREEN).
Now flash your rom
i also flashed blackstonhenge hyperslim 4.6 and now touchscreen stopped working....any solution...
Hey guys I have a hd2 that wont boot up anymore. I have installed several windows 6.5 cooked roms into this device for a while now. Recently this device has been given me a lot of problems until finally it took a dump. Now everytime i power up the device it stays in the splash screen. It doesnt even show radio version, rom version,etc on the bottom left of the screen. So is this hd2 dead or is there some way that i can fix it. I even tried installing tmobile's official rom on this device by going into the "rainbow screen" so that the device can be seen by using the usb cable, but alas....it didnt work either. So any help would be appreciated .
If it doesn't install, and nothing installs, then you need to take it to repair I guess.
I had a feeling about that. I just figured there was no way to fix it and the fact that i couldnt send it back to tmobile to get a replacement was out of the question since the firmware was modified. But your saying there are shops that fix these kinds of issues? If so, I better start looking around over here.
frequency1 said:
I had a feeling about that. I just figured there was no way to fix it and the fact that i couldnt send it back to tmobile to get a replacement was out of the question since the firmware was modified. But your saying there are shops that fix these kinds of issues? If so, I better start looking around over here.
Click to expand...
Click to collapse
why dont you try sd card method for flashing your rom !1! you can pm me if you need further help
Do you mean that it can't get to the boot loader screen (rainbow) or that trying to install a ROM from there didn't work? You might want to flash the original HSPL too, just to check.
What I mean is that everytime I boot up the hd2 it stays stuck on the splash screen. It doesn't even show the rom information in red at the bottom left corner of the screen. But I can boot to the tri color menu though. I have tried to install the tmous official rom by plugging the USB when I'm in the tri color menu and it always stays stuck at 9%. So is there way to fix this or am I screwed.
Sent from my Android Powered HD2 using XDA App
Try the sd-card recovery instead of the USB one.
http://www.jayceooi.com/2011/01/01/how-to-upgrade-htc-hd2-rom-through-sd-card-video/
After that, even if it fails, it shows only SPL in the tri-color screen then you are set to claim warranty.
frequency1 said:
Hey guys I have a hd2 that wont boot up anymore. I have installed several windows 6.5 cooked roms into this device for a while now. Recently this device has been given me a lot of problems until finally it took a dump. Now everytime i power up the device it stays in the splash screen. It doesnt even show radio version, rom version,etc on the bottom left of the screen. So is this hd2 dead or is there some way that i can fix it. I even tried installing tmobile's official rom on this device by going into the "rainbow screen" so that the device can be seen by using the usb cable, but alas....it didnt work either. So any help would be appreciated .
Click to expand...
Click to collapse
Well my bro... i think thats nand problems or heating issues ... does flashing rom goes all ok or it stops during flashing ? if stops than check if you phone is hot - hotter than normal.
Try this : Take out battery, memory card, sim card and put you phone in the fridge for about 5-10 min ( dont worry tried many times... no harm ) meanwhile prepare your sd card to flash rom with sd card method ... to do that extract Ruu rom - stock one - download with hd2 serial nr ( winrar, 7zip etc) find Ruu_Signed.nbh rename it to LEOIMG.nbh than copy to sd card ( format you sd card fat32 and make sure it works ... 2gb will work ) take phone out from fridge put sd card & battery into phone power one phone while holding volume down key ( go into tricolor screen - bootloader) and follow procedure in phone... i hope everything goes well and you fix you phone... but if still no success than flash android or wp7 ( if you have warranty flash stock SPL and return phone).
best regards from me