Related
I just bought it from eBay and it came in today. It had Laurentus26 on it, which was really buggy. So I reset it, but then it wouldn't go past HTC screen, then I flashed Stock ROM(T-mo) on it, and now its stuck at Stick Together screen. What is wrong with my phone please help I'm so sad
i think i had the same prob...
turn your phone off....press the down volume and the power at the same time and flash a new compatible rom, be careful with the radio......
crokdy said:
turn your phone off....press the down volume and the power at the same time and flash a new compatible rom, be careful with the radio......
Click to expand...
Click to collapse
Yes I tried MANY MANY times using the PC. But it still gets stuck. And now its stuck at "SOFTWARE UPDATE FAILED"
How do I force install from MicroSD?
1. go here to get the latest official ROM:
http://dl.htc.com/ruudownload/t-mobileUS/DeviceDownloads.aspx?pid=leo
2. Unzip the download and find the .nbh file. Rename it LEOIMG.nbh.
Put this file on the root of the storage card (the stock 16gb that came with the phone won't work). I recommend buying a 10 dollar sandisk 2gb for flashing.
3. Put the phone into bootloader mode. Easiest way to get into bootloader: press the reset button under the back cover followed by immediately holding the vol down rocker. Bootloader is the funny looking tricolored screen. It should stop on the screen for a couple of seconds, then jump to a grey screen that asks if you want to perform the update. Press the red end call button (power) to start or vol down to cancel.
That should do it. It should start installing. If not, I'm not sure what else can be done. This method will also "relock" the phone so you can't install any custom ROMs unless you hspl unlock again.
Good Luck
nrfitchett4 said:
1. go here to get the latest official ROM:
http://dl.htc.com/ruudownload/t-mobileUS/DeviceDownloads.aspx?pid=leo
2. Unzip the download and find the .nbh file. Rename it LEOIMG.nbh.
Put this file on the root of the storage card (the stock 16gb that came with the phone won't work). I recommend buying a 10 dollar sandisk 2gb for flashing.
3. Put the phone into bootloader mode. Easiest way to get into bootloader: press the reset button under the back cover followed by immediately holding the vol down rocker. Bootloader is the funny looking tricolored screen. It should stop on the screen for a couple of seconds, then jump to a grey screen that asks if you want to perform the update. Press the red end call button (power) to start or vol down to cancel.
That should do it. It should start installing. If not, I'm not sure what else can be done. This method will also "relock" the phone so you can't install any custom ROMs unless you hspl unlock again.
Good Luck
Click to expand...
Click to collapse
I tried an old Nokia 2GB card, it just goes to the screen where it says Serial. It's not recognizing a rom on the card. It also says "Update ROM code error. Please try again" it happened after I installed the last ROM on this list: http://www.vbnfiles.com/xda/xmoo/Leo/TMOUS/ since it had the most downloads.
Ali_Shaikh said:
I tried an old Nokia 2GB card, it just goes to the screen where it says Serial. It's not recognizing a rom on the card. It also says "Update ROM code error. Please try again" it happened after I installed the last ROM on this list: http://www.vbnfiles.com/xda/xmoo/Leo/TMOUS/ since it had the most downloads.
Click to expand...
Click to collapse
Are you getting that error when trying to flash from the card or from a computer via usb?
IF you get a ROM code error that means it is trying to flash it. I would go to the website I listed. It has you enter the S/N for the phone so you know it is the right Stock ROM.
p.s. Is it a tmobile branded hd2?
nrfitchett4 said:
Are you getting that error when trying to flash from the card or from a computer via usb?
IF you get a ROM code error that means it is trying to flash it. I would go to the website I listed. It has you enter the S/N for the phone so you know it is the right Stock ROM.
p.s. Is it a tmobile branded hd2?
Click to expand...
Click to collapse
yeah its a T-Mo HD2, and yes that's where I got the ROM after entering my IMEI #, it gives some other error on PC, and gets stuck at 8%. Also, while flashing that ROM it wasn't connected to Device Center, since the PC wouldn't recognize it.
I called T-MO and they are sending me a brand new one, anything I can do in the meantime?
Ali_Shaikh said:
yeah its a T-Mo HD2, and yes that's where I got the ROM after entering my IMEI #, it gives some other error on PC, and gets stuck at 8%. Also, while flashing that ROM it wasn't connected to Device Center, since the PC wouldn't recognize it.
I called T-MO and they are sending me a brand new one, anything I can do in the meantime?
Click to expand...
Click to collapse
if you have to send this one back to them, it needs to be stock or bricked.
Once you get the new hd2, I would try to flash a .51 radio onto the one you need to send in. That will brick it so they can't see that is not stock.
nrfitchett4 said:
if you have to send this one back to them, it needs to be stock or bricked.
Once you get the new hd2, I would try to flash a .51 radio onto the one you need to send in. That will brick it so they can't see that is not stock.
Click to expand...
Click to collapse
How do I do that?
Ali_Shaikh said:
How do I do that?
Click to expand...
Click to collapse
same way you flash a ROM, either through usb or from SD card:
http://forum.xda-developers.com/showthread.php?t=611787
Download a .51 radio and extract the .nbh file, rename it LEOIMG.nbh and put it on the storage card, enter bootloader, if it will flash, voila; instant brick!
I would only do this if they want the old one sent in and you can't get a stock ROM on it.
Hello guys,
I got a HTC HD2 today from ebay, the seller has 100% feedback.
I have done a search about my problem but I dont wanna do anything wrong on the phone if the phone is faulty and send it back.
My situation was, I got the phone, inserted my SIMcard and set all the first settings. after 2min someone called me, when I answered the call couldnt hear anything and the phone was frozen :\ after few seconds the phone reboot itself and I waited 5min to see if turned back on, but didnt :\
I've tried pressing the yellow reset botton near the battery, I've tried hard reset.
And if I press VOL down and turn the handset on thats the info I get :
PB81120 SS-B3
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
and on the bottom of the screen says SERIAL, nothing else
I've got the phone from America (T-mobile) I'm in australia, melbourne
I've worked hard to get this phone and now when I got, could only use it for couple minutes
Please help me asap.
Thank you and sorry open other topic about it
Guessing its TMoUS HD2 Leo1024. BTW what rom is installed on it did you get to notice while you had it? Something is odd here you are not sharing with us how does it go and get stuck in that screen.
Well to be safe if you don't know flash it. So don't matter remove the battery and restart it and go to bootloader mode by pressing power button while holding down the bottom volume button. Then connect the device to your PC via USB mount and download and run HSPL or you can do it via stock rom go download 2.10 from WM dev archive thread.
I just got the phone today :\ the seller said to me the phone is the tmobile version 512mb. I'm a bit noob with HTC, Ive been with iphone until today. well, Im not sure which rom I had, but I think its LEO.
Ive tried all afternoon, I removed the battery out of the phone for 2 hrs, then tried again(without SIMcard) and the phone started up again as new settings and asked me to put my simcard in, so I removed the battery and put the simcard in, turned the phone on, it got stuck again in STICK TOGETHER screen
I dont wanna be inconvenient about all my questions, I just want my phone fixed :\
I couldnt do anything with the phone cos I set up the settings, after couple min got a call and the phone froze and it reboot it self stucking in STICKY TOGETHER screen. I was trying to flash it, but how can I sync my phone with windows 7? cos if I put in bootloader screen, it says USB at the bottom but WMDC says device not conected.
Do you have any solution for my problem?
thank you for your reply
Ahhh as you said TMobile I naturally thought it would be Leo1024(HD2-US) but now that you say its 512mb thats not TMobile you are using Leo512(HD2-EU). I had a feeling you flashed your rom as you flashed wrong one then.
So to verify post the HSPL and ROM data from where you got it from so we know. Also visually verify your actual device does it say TMobile on the top? does the button have colors? If both = yes its TMobile.
My phone has T-Moline on the top and has colors on the buttons. its definately t-mobile. I asked the seller and he said was 512, maybe he is wrong.
I havent done anything to the phone I cant flash cos I cant even conect with my computer the phone came from USA. I'm in australia
thank you
If it's a USA TMobile, then it's not the 512 version, and you need to flash only US TMO compatible ROMs or you could brick it.
When you say you tried a hard reset, how did you do that?
It should be when the phone is off you hold down both volume up and down, and keep them held down, then briefly press the power button but keep holding the volume buttons.
What happens when you do that?
Try to flash it through the sd card.
- Download the rom you want, uncompress the files, rename the nbh file to LEOIMG.nbh
(The original HTC rom files can be uncompressed too, even if they are .exe files - you will find a .nbh file inside)
- Copy this file to the root of the sd card.
- Reboot while pressing volume down.
It should start to flash the new rom.
That's what I called Hard reset
I'm doing it again and comes up a grey screen saying
This operation will delete all ur personal data, blah blah blah..
Press VolUp to restore manufacturer default, or press other keys to cancel
I pressed VolUp
..restore..completed
Press VolUp to bootup
Jeckas said:
That's what I called Hard reset
I'm doing it again and comes up a grey screen saying
This operation will delete all ur personal data, blah blah blah..
Press VolUp to restore manufacturer default, or press other keys to cancel
I pressed VolUp
..restore..completed
Press VolUp to bootup
Click to expand...
Click to collapse
Well if that appears to work, but doesn't, you could have a real problem there. Do what joooe suggested above - that's the only option you've got left, without sending it away for repair.
joooe said:
Try to flash it through the sd card.
- Download the rom you want, uncompress the files, rename the nbh file to LEOIMG.nbh
(The original HTC rom files can be uncompressed too, even if they are .exe files - you will find a .nbh file inside)
- Copy this file to the root of the sd card.
- Reboot while pressing volume down.
It should start to flash the new rom.
Click to expand...
Click to collapse
how can I know the right ROM for my phone, cos the seller is saying its t-mobile 512mb and @johncmolyneux says that t-mobile is 1024mb
I dont wanna brick my phone at all.
I'm from portugal but I'm in australia, let me know if you can help me flashing my phone detailed. regarding I'm noob about it :\
thank you
or what ROM do you recomend for me?
can I provide you more info about my phone? to get the right ROM for me.
thank you
AFAIK, if it says T-Mobile on it and it has coloured call buttons then it's a US TMobile. Only the US ones have coloured buttons, and they're all 1024MB ROM.
May be wise though to wait for someone else to confirm this, as you've got me doubting myself now!
what would happen if I install AFAIK rom and then my phone is 512mb? would brick my phone? I would be unable to use my phone anymore? thank you so much for all ur help guys
Jeckas said:
what would happen if I install AFAIK rom and then my phone is 512mb? would brick my phone? I would be unable to use my phone anymore? thank you so much for all ur help guys
Click to expand...
Click to collapse
I don't know if it's 100% bricked afterwards, but you do need to install a compatible ROM, made for your device, so you need to be sure which one it is. It's really not worth rushing this and trying to just install a ROM as you may irreparably damage your phone.
ok, I will follow ur advice
should I follow this thread?
http://forum.xda-developers.com/showthread.php?p=6894936#post6894936
how can I make sure is 512mb or 1024mb?
but it says :
1024LEOs (from T-Mobile with 1024ROM) ARE NOT SUPPORTED
but then if my phone is T-mobile with 1024ROM
I can follow this one yeh?
http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893
thank you very much
Like I said earlier, wait for a while and let someone confirm that it is indeed a 1024MB ROM, or you will probably brick it and not be able to fix it.
HSPL3 works on all types of HD2 though, so you can flash that. Those links are both actually the same thing.
Just don't flash a ROM until you know 100% that you have the right type.
It is the TMOUS 1024 LEO.
Go to the HTC website and download a T-Mobile USA ROM, you are required to enter the phone's serial number. This will guarantee that you only download a ROM that is suitable for your phone.
Since you really just want to test the phone then go for the 2.10 ROM.
Firstly press and hold the Volume Down button, then tap the power button. This will bring you into Bootloader Mode (as you previously have done). When you plug in the USB cable to the computer the 'Serial' on the phone's screen will change to 'USB'.
As an administrator run the ROM and just tick the box about activesync.
thank you.
can I provide more info about my phone? to make sure for everyone?
thanks
Jeckas said:
thank you.
can I provide more info about my phone? to make sure for everyone?
thanks
Click to expand...
Click to collapse
I was 99.9% sure and just wanted someone else to agree really.
Basically, US T-Mobile HD2 are the only ones in the world with green and red call/end-call buttons, and every US T-Mobile HD2 has 1024MB ROM. If the guy you bought it off said it was 512MB then that would explain why it's in its current condition. It sounds like he believed it to be a 512MB version, and flashed a bad ROM. It also sounds like he's palmed it off on you, believing it to be knackered.
As fred_up said, go the the HTC site and download an official ROM for that device. You should be able to install that with no issues and see if the phone definitely works or not.
Good luck mate
@fred_up
do I have to flash first with this HSPL3?
I have downloaded and the phone was detected I went just to the step to select HSPL version to install
the choices are :
2.08.HSPL
2.08.0000
what should I do first?
I will try to find the rom on HTC website.
thank you very much
I got this phone on Ebay because I am poor. It was a T Mobile unlocked that was changed to Android. I can't get rid of the old user name and don't have the password for the Android market account set up on this phone. I can't do a factory reset and I need help. I would prefer to put 7 on it but I would be happy putting 6.5 back. Android would do if I could reset the user account. I do hope someone can help me. I am not very technically gifted but I can follow easy instructions. Please help me.
Judy
Because you are new at this I suggest flashing the stock T Mobile from your SD card. It is the simplest and safest thing to do.
You may need the Serial and IMEI numbers located under the phones battery.
1. Make sure your microSD is Formatted to fat32
2. Go to T Mobile web site and download the rom. It will ask for you IMEI number this makes sure the rom is for your mobile.
3. Unzip/unrar the downloaded file into a folder on your PC
4. Rename the RUU_signed.nbh file to LEOIMG.nbh
5. Copy the LEOIMG.nbh file to the root of your MicroSD Card
6. Plug the MicroSD Card into the phone
7. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
8. Follow the On Screen instructions to start the update
9. After flash has completed, press the reset button with the stylus to reset the device.
What if you want to flash it without using the SD card? I flashed android using NAND but I want to put WM 6.5 back.
oscar0324 said:
What if you want to flash it without using the SD card? I flashed android using NAND but I want to put WM 6.5 back.
Click to expand...
Click to collapse
I think doing it with the SD card is only way to get back to 6.5.
You could always boot into the boot loader by holding the up volume and power key then flash a 6.5 Rom.
Sent from my HTC HD2 using XDA App
GaryOG said:
Because you are new at this I suggest flashing the stock T Mobile from your SD card. It is the simplest and safest thing to do.
You may need the Serial and IMEI numbers located under the phones battery.
1. Make sure your microSD is Formatted to fat32
2. Go to T Mobile web site and download the rom. It will ask for you IMEI number this makes sure the rom is for your mobile.
3. Unzip/unrar the downloaded file into a folder on your PC
4. Rename the RUU_signed.nbh file to LEOIMG.nbh
5. Copy the LEOIMG.nbh file to the root of your MicroSD Card
6. Plug the MicroSD Card into the phone
7. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
8. Follow the On Screen instructions to start the update
9. After flash has completed, press the reset button with the stylus to reset the device.
Click to expand...
Click to collapse
I have spent hours looking and I just can't find the old version of the software. I will continue to look but if anyone has a link please help the IMEI 357779035940129
If i do this will I have to unlock it again for AT&T?
Stormynights said:
I have spent hours looking and I just can't find the old version of the software. I will continue to look but if anyone has a link please help the IMEI 357779035940129
If i do this will I have to unlock it again for AT&T?
Click to expand...
Click to collapse
Try this
http://xdafil.es/HD2/TMOUS/RUU_Leo_...dio_Signed_15.39.50.07U_2.10.50.26_2_Ship.zip
I do not no If you have to unlock it again for AT&T.
Cheers
GaryOG said:
Try this
http://xdafil.es/HD2/TMOUS/RUU_Leo_...dio_Signed_15.39.50.07U_2.10.50.26_2_Ship.zip
I do not no If you have to unlock it again for AT&T.
Cheers
Click to expand...
Click to collapse
Thank you so much for the link.
stop!!!!!!!!
Everyone has forgotten to find out what device this is, t mobile are all over the place and some ship 1024MB versions, don't flash anything until you work what you need, flashing incorrect tmobile roms could give you a really bad day and an expensive paperweight
I tried the data cable first and it won't sync with active sync because it is at this time android. It just isn't recognized as anything but a usb storage device. Then I tried the card. I put all the files on the card according to the directions and hit the volume down button and the power button and nothing happens. I then have to remove the battery to turn it back on. The screen that comes up when I first start the phone is dark forces team. There has to be a way to do this.
You have to be holding vol down before u even press the power button, then press the power button simultaneously. U should see a tri-color screen then connect your usb to pc and flash the 6.5 ROM
Make sure u start with the phone off
Sent from my HTC Desire using XDA App
[email protected] said:
You have to be holding vol down before u even press the power button, then press the power button simultaneously. U should see a tri-color screen then connect your usb to pc and flash the 6.5 ROM
Make sure u start with the phone off
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
When I take the battery out and then hold down the volume and press the power button I get that multi screen and I got to the USB then nothing else happens. What am I missing?
dazza9075 said:
stop!!!!!!!!
Everyone has forgotten to find out what device this is, t mobile are all over the place and some ship 1024MB versions, don't flash anything until you work what you need, flashing incorrect tmobile roms could give you a really bad day and an expensive paperweight
Click to expand...
Click to collapse
WHY?
OMG I did it. I can't wait till my grand kids find out how cool I am now. Thank you to everyone that helped me.
Stormynights said:
I tried the data cable first and it won't sync with active sync because it is at this time android. It just isn't recognized as anything but a usb storage device. Then I tried the card. I put all the files on the card according to the directions and hit the volume down button and the power button and nothing happens. I then have to remove the battery to turn it back on. The screen that comes up when I first start the phone is dark forces team. There has to be a way to do this.
Click to expand...
Click to collapse
I had a few attempts before I got it so try again.
It worked for me with a 16GB card.
Turn off your mobile.
Hold the Volume Down and End Call (power) buttons at the same time.
When "Searching" appears on the screen, release the Volume Down button.
This guide may help. But ignore the things about custom ROM’s and HSPL for now.
http://forum.xda-developers.com/showthread.php?t=681317
ok, there are two versions of the HD2, one with 512MB one with 1024MB, some t-mobile US phones (TMOUS) have 1024MB, if you ge the wrong ROM you could potentially bugger your device
for instance, flash a ROM with a unsupported radio on your device than game over....potentially
if you have a TMOUS 1024MB HD2
flash to .51 radio an its screwed
flash to .50 radio an its ok, except 2.05.50.x radio which will screw it
and stick to TMOUS ROMS as well
if you have the regular world wide version we can flash to what ever we like
its important to find out what someone is using before recomending them to flash any WM6.5 ROM because if by chance that ROM contains an incorrect radio version for that hardware then its game over.
I was trying to install blackSTONEhengeHyPerSlim_4_1 on my blackstone. I installed olinex and after that stored the nbh and exe file on the sd card and then through task 29 flashed it. The rom got successfully installed but now the phone is stuck at the bootup. It says
Checking Radio...
Checking protocol..
Checking Rom..
But now won't get to the next screen.Because of this i can't get to active sync. Please help..Pleaaaasseee
Did u follow the instructions completely, cause it worked fine for me and others... Do you have radio 1.14 or above installed? Did u try to reflash?
ok, no need to worry. Boot into bootloader. What is your SPL?
Yes i did follow the instructions. Now the phone won't bootup. I tried it with the volume down and power up method. Rom does get installed but then again it won't bootup..
Did you try Vol UP + Vol Down + Power ?
Yes i did try that after my phone got screwed up with test29 method but it shows nothing at all after successfully installing rom..:-s
no need to worry
always read read read and must read before flashing. I think your phone is quite ok. You does task29 to it. what is task 29 means. it means task29 will clean our device completely only splash screen displyaed, phone always stucked on this screen. it is very normal, it means you completyely cleaned your device. now you are ready to flash your device. do the following procedure--
1. remove the battery and reinsert it.
2. now turn on the phone while pushing volume down key.
then bootloader (tricolor screen) mode will be displayed. many times it will not come into bootloader and device normally starts and stuck on splash screen. the reason is simple, you didnt press volume down key properly, it happend many times to me also.
Now remove battery cover, remove battery and reinsert it, dont cover the battery, now take slylus & press volume down strip with the stylus. ( volume up & down keys are installed in battery cover, so when you push volume down key in flap open condition, it should be done by stylus.)
ok
push volume down by stylus & hold it and start the device, it will come in tricolor screen means bootloader mode, on the bottom screen it will show serial.
Now conect the device to the pc & bottom line on the screen will become serial to USB.
Now perform task28= means flash normal rom, do not perform task 29 again.
task29 will take 1 minute to flash while normal RUU will take about 7-8 minute.
try it and give feedback/
kulwant said:
Yes i did follow the instructions. Now the phone won't bootup. I tried it with the volume down and power up method. Rom does get installed but then again it won't bootup..
Click to expand...
Click to collapse
Have you flashsed a differnet radio ?
What you did is just Task29 your phone. Task29 needs something to flash in order to do its thing. Usually we flash radios (good ones obviously) because they are smaller than full roms. If you flash a full rom with Flash29, it will get erased after completion.
What you need to do now (since your phone now has no ROM installed) is boot it while pressing volume down to get to the bootloader, plug via USB and flash a rom using a "non-task29" flasher, like the standard BlackStoneCustomRUU.exe file that comes with basically every rom.
Hello thanks for replying my internet wasn't working but i did manage to boot my phone but now the touch stops working after. I know this as i press the volume button and the phone responds to that hence telling me it's not really freezed up. This is all what i did.
Stored .nbh file in the task 29 folder this is the rom version whose nbh file is used (RUU_Duttys_HD_V3.9__XT_Turbo_5.2.21051.1.6.4_1.59.709.0_Radio_52.62.25.34_1.14.25.24_)
After the flashing is done i reset the phone by taking out battery and starting it again in bootloader.
Now i flashed again with (blackSTONEhengeHyPerSlim_4_1)
After installing it completely the touch stops responding.
Kindly help me with what seems to be the problem. Thanks
kulwant said:
Hello thanks for replying my internet wasn't working but i did manage to boot my phone but now the touch stops working after. I know this as i press the volume button and the phone responds to that hence telling me it's not really freezed up. This is all what i did.
Stored .nbh file in the task 29 folder this is the rom version whose nbh file is used (RUU_Duttys_HD_V3.9__XT_Turbo_5.2.21051.1.6.4_1.59.709.0_Radio_52.62.25.34_1.14.25.24_)
After the flashing is done i reset the phone by taking out battery and starting it again in bootloader.
Now i flashed again with (blackSTONEhengeHyPerSlim_4_1)
After installing it completely the touch stops responding.
Kindly help me with what seems to be the problem. Thanks
Click to expand...
Click to collapse
Hi mate.
I did somthing for you....so i hope it will helps you.
1. download file from this link. http://hotfile.com/dl/115059516/5623431/Radio_1.13.xx(original_hd_nbh)__task29.rar.html and after unrar.
2. Make task 29 with this one. (Nothing change in that unrar folder)
3. After finished T29, take uot battery, put it back, put device to BootLoad. screen.
4. Connect with PC again and flash your desided ROM. (it means if you choice your rom, after unrar or unzip, Rom has own folder with that all files ...BLACIMG.nbh, BS_CustomRUU.exe, etc......
thanks i'll just download and do it..Will definitely post in what happened...Thanks a tonne for the quick response..
kulwant said:
thanks i'll just download and do it..Will definitely post in what happened...Thanks a tonne for the quick response..
Click to expand...
Click to collapse
...It's ok mate, like i wrote, i hohe, it 'll helps you.
let me know after....
Any new good looking rom you would suggest for me to try that would be bugfree ???
kulwant said:
Any new good looking rom you would suggest for me to try that would be bugfree ???
Click to expand...
Click to collapse
.... for beginning: T29 finished ok?
for your guestion: Hmmmm, for me...really good ROM is from Cloudyfa, but objectively, it's up to you, which one from this site you choice.
The link you gave me says
This file is either removed due to copyright claim or is deleted by the uploader.
:-s
kulwant said:
The link you gave me says
This file is either removed due to copyright claim or is deleted by the uploader.
:-s
Click to expand...
Click to collapse
Yeas mate, i deleted it. I was thinking, that you download this file already and saved it to your PC.
LoL it's all cool it takes a while i got 512kbps..I got the stock rom from xda page
RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.3 4_1.13.25.24_Ship.exe
This one's fine right
kulwant said:
LoL it's all cool it takes a while i got 512kbps..I got the stock rom from xda page
RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.3 4_1.13.25.24_Ship.exe
This one's fine right
Click to expand...
Click to collapse
Yes that one is fine. Once T29 is complete take out battery and then re-insert it. Now put phone into bootloader (hold vol down and press power on while still holding vol down. BOOTLOADER IS A TRI-COLOUR SCREEN).
Now flash your rom
i also flashed blackstonhenge hyperslim 4.6 and now touchscreen stopped working....any solution...
Hey guys.
I have a bricked HTC HD2 here. I installed Android 2.2 on it, and it ran fine for a long time. But a few days ago, it got stuck in a bootloop. It gets stuck on the Android logo and doesn't get past that point at all.
What I've tried (in chronological order):
1. AD Hardreset from aMAGLDR: erased all data, but didn't fix the problem. Kept going in bootloop.
2. AD Recovery: Failed. Doesn't get past the "GO GO GO!!"
3. Repair aMAGLDR using HD2 NAND toolkit: tried repairing (150MB partition size) and installing Clockwork Mod (150MB). Same exact results when trying to get into AD recover. Only diffrence is that I now don't have a ROM on my NAND anymore.
4. Install a diffrent rom: Tried a few of them, but they all keep getting stuck on their bootlogo (HTC, Android, ...).
5. Restore STOCK ROM WM6.5: I'd love to, but I can't get into the three-colors-bootscreen. It goes straight to aMAGLDR, even when I boot holding the right buttons (volume down + power [both short click and long hold]). I had set up the ROM files correctly on the SD card.
6. Install the STOCK ROM using the HD2 NAND TOOL: after going to USB Flash mode and installing the default microsoft drivers (it didn't want to accept the Google Android drivers or HTC drivers I downloaded earlier), the flash utility keeps getting stuck on ERROR 264: CONNECTION. The only thing I can do in the HD2 NAND UTILITY is repair aMAGLDR. Other options result in the same error. Task29 can't find the phone either.
Bottom line, I cannot (ABSOLUTELY not) get into the tri color boot screen. It sends me straight to magldr. Also, my volume buttons are working just fine.
I really don't know what to do anymore. I hope someone can help me, any help would be greatly appreciated
Did you try this?
Download an original win 6.5 ROM for your HTC device from HTC webside.
- Take "RUU_signed.nbh" from an original ROM and copy it to your SD card.
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume down button
powerofthink said:
Did you try this?
Download an original win 6.5 ROM for your HTC device from HTC webside.
- Take "RUU_signed.nbh" from an original ROM and copy it to your SD card.
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume down button
Click to expand...
Click to collapse
Did you even read the OP's post, clearly I think not. The OP says several times that they can not get the device to the multicolor WINCE bootloader.Without being ably to boot into the bootloader they can notflash via SD card.
At the OP you can stop trying to flash via USB flasher in MAGLDR, it is only for flashing Android RIMs, WP7 ROMs, and Custom Android recoveries. If you are positive your volume down button works then you probably have some bad NAND blocks, but that is just a guess, with out access to the bootloader you are pretty much only left with flashing Android or WP7 via USB flasher in MAGLDR.
That's problematic... The HD2 NAND utility can't flash any ROMs, since the utility can't find the device (error 264).
I've tried 8 diffrent ROMS (from http://android.hd2roms.com/) by putting them on the SD card and use the "AD SD boot" function, but none of them can get past their bootlogo... All ROMs keep hanging on HTC / Android logos. Some of them used to work in the past, I recall...
Here, try these fixes and read the WHOLE POST :
http://forum.xda-developers.com/showpost.php?p=21725062&postcount=7
Thanks for the link. Unfortunately, none of the solutions worked. The battery pins were indeed bent, but after putting them back in place, the problem persisted.
I left my phone powered down all night and tried booting it in bootloader this morning. It didn't work. So that rules out solution 3 awell.
I've even put it in the freezer for half an hour (solution 5), but nothing changed.. Browsed through the last thread aswell, but there was no stuff I haven't tried yet. I can't even start tetris, since it keeps hanging on a blank screen aswell
The guy in solution #4 was facing the same issue (I think).
Especially the second part of the solution, where he talks to the OP. Read it carefully, and check out the post and thread he referred to.
Holy freakin..
After reading various threads through links in the one you suggested, I stumpled upon something called American Android. I was able to install it through the USB Flasher. Guess what, it booted PERFECTLY!!
My phone works again, thank you VERY much!!
Lorre851 said:
Holy freakin..
After reading various threads through links in the one you suggested, I stumpled upon something called American Android. I was able to install it through the USB Flasher. Guess what, it booted PERFECTLY!!
My phone works again, thank you VERY much!!
Click to expand...
Click to collapse
horayyy for the HD2 & for the guys that gave the solutions!
need information in case of not getting into the bootloader
how can I use the american android + USB flasher method to work for my hd2 if
I am not able to boot it,
can't soft/hard reset it,
can't get into the bootloader (using volume down + end key pressed).
I used android installed on SD card.
It is totally unresponsive for now. volumn keys worked perfectly when it is was working lastly !
Please tell what can bo done to it to get it working or where does the problem lies.
check your battery pins and also battery if it is charged.
and,
Download an original win 6.5 ROM for your HTC device from HTC webside.
- Take "RUU_signed.nbh" from an original ROM and copy it to your SD card(formatted FAT32.)
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume or without press
Click to expand...
Click to collapse
and then you can try an android rom again..
Another solution?
I had the exact same problem. And I am under the impression that there is no solution for every case. But for me it worked to press the volume down button very softly. I tended to push the button as hard as I could, however when I only pressed the volume down button slightly it went straight to the triboot color.
Hopefully this works for some of you.
Can someone help?
Hi,I want to refresh post, becouse i have exact same problem - can't get to serial bootloader, and in MAGLDR i can use only the USB FLASHER option. If someone could tell me how to flash any new rom only through FLASHER ? Last thing i can say: my problem started from installing this app from google Play play.google.com/store/apps/details?id=eu.chainfire.livelogcat.lite (sry for that, but I can't post URL yet) it might messed up my kernel and i have no idea what to do.