Database Users

Water Damage - Quick Question

I just got a 8525 today and want to make sure there is no water damage to it.
When you take off the battery cover, to the right of the camera there is a white circle that reads 'VOID' on it in read. Does this mean it has had water damage (hence void), or does it mean that if that white circle turns all pink, then it has had water damage?
My last phone had water damage, but it had a little white section that just got a bunch of pink dots on it after damage. Void is written pretty neatly, so I am assuming no damage has been done and it should be ok.
I just wanted to check with other 8525 owners and make sure that is what it should say.

Superman859 said:
I just got a 8525 today and want to make sure there is no water damage to it.
When you take off the battery cover, to the right of the camera there is a white circle that reads 'VOID' on it in read. Does this mean it has had water damage (hence void), or does it mean that if that white circle turns all pink, then it has had water damage?
My last phone had water damage, but it had a little white section that just got a bunch of pink dots on it after damage. Void is written pretty neatly, so I am assuming no damage has been done and it should be ok.
I just wanted to check with other 8525 owners and make sure that is what it should say.
Click to expand...
Click to collapse
thats not a waterdamage sticker to the best of my knowledge, theres a screw underneath it.

Thanks - phone seems to work fine and everything works as it should (except for the keyboard - it seems the layout internally doesn't match with the keys on the keyboard, but there probably is a thread regarding this) - just a few nicks on the outside.

Rooted Nexus One Return

Just quickly telling my story.
I noticed after unlocking my bootloader that I had a tiny bit of dust under my charging LED and a small chip out of the inner bezel (The area between the screen and the edge of the phone).
I called HTC support and they offered a swap. Sent me a new phone and I sent mine back, didn't even mention the unlocked bootloader to them and haven't heard back from them.
They do ask you to keep your old battery and battery cover, and for some reason my old battery cover isn't quite flush with the edge of the phone! I called HTC again and they've sent me a new one, hopefully it fits.
Anyway, just confirming once again that unlocking the bootloader may void your warranty, but they don't even ask if you've done it or seem to mind. .

Good to know man, that is some valuable information. I had always assumed I would be covered in a situation like yours, but it is definitely good to know for sure.

when looking at the back of the phone was the uneven battery door on the upper right side? thats where mine is uneven.

phxblue said:
when looking at the back of the phone was the uneven battery door on the upper right side? thats where mine is uneven.
Click to expand...
Click to collapse
Yes, I have the same uneven battery cover at the back. The 'body' of the phone around the curved edge juts out beyond the battery cover. The left-top side of the phone body is however flush with the battery cover.
However, I am not going to exchange my phone since everything else is perfect this will not be noticeable or a concern with the innocase II

phxblue said:
when looking at the back of the phone was the uneven battery door on the upper right side? thats where mine is uneven.
Click to expand...
Click to collapse
Yes, it is on the upper right. If it is the phone I may ask for a new one from HTC again. I am a huge perfectionist when it comes to gadgets.

Upper right, centre left and bottom edge of my battery cover are all out of alignment...

Defective Bezel Seal And Defective Digitizer Seal.

My MyTouch 3G Slide has a couple defects. The bezel or plastic housing that surrounds the upper portion of the device surrounding the screen has gaps in it around the seam that allows dust or any small particulate to enter under the screen. I have looked at several of the devices and they all have it to one degree or another. For instance, on my Slide I have 3 of these holes one of which has allowed a grain of sand under my screen. My wife's Slide has 4 of these holes or gaps and they are substantial on her phone. One XDA member has had this happen in the same spot that both my wife and my Slides are collecting dust.
While the light leaks or gaps in the bezel are a problem (for me) I think the real problem lies in the adhesive strip that connects the digitizer to the LCD screen. The way the digitizer is adhered to the LCD there shouldn't be any way for dust to have gotten in between the two pieces of hardware. I'd like to believe that it was just my particular phone but my wife's phone is having the exact same issue.
The phone really is phenomenal and I'm sure it was just a fluke that I've had issues (hoping so). Just keep an eye out for any issues similar to what I've mentioned above. I have really gone back and forth with this and I am definitely disappointed with having an issue(s) right out of the gate. My wife really likes the phone and after giving it some thought I like it as well ... a lot. I will return and reorder another couple Slides because this device is that awesome. Thanks for your thoughts/contributions to the thread.

I've tried to get some photos of the gaps but they are small and hard to photograph. To inspect your device: Go into a dark area and pull up your contacts, messaging app or a white web page in the browser with full screen brightness and inspect the seam of the plastic housing surrounding the touch screen on the top half of the slide. The gaps are almost like rectangular notches just below/above the corners of the screen in the seam. My theory is that these are artifacts from the plastic molding process that were exacerbated by poor/hasty assembly. I am definitely returning my Slides.

Its all true. After reading, and seeing the image posted by another member here, I checked my phone. I went into a dark room, opened up a site that has pretty much a white page, and I too noticed a gap at the bottom right hand corner of my screen. As of right now no dust/dirt has shown up under my screen, but what's to say that it won't later on. Heck, screw dirt. What if moisture finds its way in, and starts to fog up the screen from within? This could be a major problem later on down the road.

whew... just checked mine, noticed nothing like that, thank goodness.

[email protected] said:
whew... just checked mine, noticed nothing like that, thank goodness.
Click to expand...
Click to collapse
Strange, I've confirmed with everyone I know with a Slide (only black and white thus far) and everyone is seeing the same thing. What color Slide did you get? I wonder if the red Slide is manufactured differently? Anyway, that is awesome because I think the phone is GREAT other than the small gaps in the bezel.
I will say I took some compressed air and attempted to move the artifact under my screen just to see if air was moving through those gaps. The grain of sand or whatever it is did not budge. I'm just not sure what to think. I hate the idea of returning this phone ...

Mine is like that. Not that i care much as im returning it soon. But it does have gaps and light leakage all over the bottom of the screen, near the buttons.

i just check my and maybe i cant see it but i havent found anything... i have a red one

Re: My MT3G Slides (and others) Have A Defective Touch Screen Bezel
Initialy checked mine as well, black. I don't appear to have this problem either.
I will inspect further to verify.
Sent from my T-Mobile myTouch 3G Slide using Tapatalk

The only one I have is at the very bottom of the buttons, which might even just be the light hitting the glass at a specific angle. Other than that, no light leaks/cracks/blocks/whatever you call them on my screen area. Red Espresso.

I just swapped my white MTS for a Black one with no signs of cracks or light showing threw. TMO rep did not know of this problem and said he would send out an e-mail to other reps to let them know.

My day is now ruined
Yep, both bottom sides, right at the corners, above the buttons. I will not return it though, think instead a lil duct tape and some JB weld will do (seriously, a little touch of black silicon for a good seal, still sucks though). Screen cover seems to be blocking any dirt at the moment.

woow good looking out.. i was wondering how a spec of dust got to my screen. im planning on putting a piece of scotch tape over those regions (i have a red slide btw).

I have a red one and didn't see any leaks bottom or top. Thank goodness!

mtjnkee said:
seriously, a little touch of black silicon for a good seal
Click to expand...
Click to collapse
I hear you; I've been trying to find a way to keep the bezel sealed until I can get a case/cover for the phone. I literally have one tiny grain of sand at the bottom left hand corner of my screen. I so don't want to return the phone; I'm in love with the thing.
Glad to hear some of you have a better seal on the bezel.

I have some small light leak on the bottom, not an issue yet and I'm still within my 14 days so I might stop by the t mobile store tomorrow and try to get a replacement.

1. slight curved gaps at the corner edge where the top of the plastic curves down to turn into the sides. check
2. vertical rectangular light leak above home and genius keys. check
3. these lights only light up when hard keys are lit..when screen first lights up...light leaks are not there...once keys light up, light in the gaps light up. doesnt this mean the screen is sealed and there is no leak from the screen itself?
4. however, if you have a creaky top plastic housing, the seam running along the edge of the white plastic and grey plastic is not flush...on my 1st slide, i could see the screen light up in these 'cracks' of the seam...could debris get into screen this way then?
5. for those with debris already at lower left part of screen: pls do me a favor:
hold phone (sideways with back cover facing the ground) at just below eye level and try to see that left corner that is underneath the painted black surround of the screen..do you see white light when the screen is lit? if you look along the 'inside' edges along the rest of the phone, you will see that there should not be white light emitting out and should have a 'clean' look...there should basically be a solid black border...perhaps, if you guys have this white lighting show through, that could mean a separation of the screen somehow? btw, you do not have to be in a dark room to see this light along the inside edge....it is very noticable as the light comes thru where i think there should be no light. ps: when looking at the phone screen normally (ie from top down), screen looks perfect and this issue doesnt affect actual picture on screen.
my first slide had the light leaks but i didnt think anything of them as i thought they were related to the buttons only...but the issue i had spoke of in #5 above, i had this light coming thru along the whole edge of the bottom of the screen plus creaky top plastic housing.

I have dust under the entire screen of 2 Slides (Espresso), I couldn't notice it indoors but it is glaringly apparent when in the sun. The phones go back tomorrow. I've had my G1 for a year and a half with not a single spec of dust under the screen. I've had 2 MT3G Slides (Espresso) for 6 days and dust is under both screens; these devices are very cheaply made. Phone is lightning fast, screen size is great, physical keyboard is great, UI has some excellent features you can find nowhere else ... too bad I won't be keeping them. Been nice knowing you guys.

Seriously everyone be lucky that this is the only problem that people are having with this phone. You want to talk about shoddy build quality on first run devices, lets not even mention what the original PSP was like. If all that's wrong is that a few people have a bad bezel, then I'd say you made out well with the phone. NJAZ, just exchange them and have the employee test them at the store before you walk out with it, problem solved.

xenoletum said:
NJAZ, just exchange them and have the employee test them at the store before you walk out with it, problem solved.
Click to expand...
Click to collapse
Well I have to send them back as I ordered them online. 2 phones plus about 5 other people I know with these phones have dust blowing in under the defective bezel. It's unacceptable. Like I care about a PSP. What the hell does a PSP have to do with this? You didn't even comment on your phone having the light leaks/gaps or not. What is your point? You think folks should settle for inferior builds of an expensive phone? You can ignore whatever you'd like. I will wait for a better phone.

Wanted to add to my previous post about mine not having the leak... I have the red one.

Water Damage Indicators?

Hi guys, just going to RMA my phone for faulty volume rocker (intermittently stops working for periods of a few hours and then randomly starts working again), however a week ago I spilled some coffee over my device, it was in a silicone case at the time which I think helped a little in stopping coffee getting here, there and everywhere. I'm fairly certain the issue isn't water damage related as that was over a week ago and the phone has been working perfectly up until a couple of days ago. I took the back of the nexus 4 off to inspect for any coffee that may have gotten in there and caused the issue but it was dry as a bone with not a coffee stain in sight.
Just wondering if there are any water damage indicators on the phone that may show that coffee has been spilled on it? I have heard the white strip on the inside of the sim card slot is an indicator, mine is still white so if it is then it hasnt triggered that one, any others that I should know of? Just double checking before I RMA and they try and say its due to water damage then charge me. Any info is much appreciated, thanks.

Daley87 said:
Hi guys, just going to RMA my phone for faulty volume rocker (intermittently stops working for periods of a few hours and then randomly starts working again), however a week ago I spilled some coffee over my device, it was in a silicone case at the time which I think helped a little in stopping coffee getting here, there and everywhere. I'm fairly certain the issue isn't water damage related as that was over a week ago and the phone has been working perfectly up until a couple of days ago. I took the back of the nexus 4 off to inspect for any coffee that may have gotten in there and caused the issue but it was dry as a bone with not a coffee stain in sight.
Just wondering if there are any water damage indicators on the phone that may show that coffee has been spilled on it? I have heard the white strip on the inside of the sim card slot is an indicator, mine is still white so if it is then it hasnt triggered that one, any others that I should know of? Just double checking before I RMA and they try and say its due to water damage then charge me. Any info is much appreciated, thanks.
Click to expand...
Click to collapse
Umm the indicator can only be seen when you take out the sim tray, there's a tiny tiny strip visible on the bottom (inside the sim slot), and that's the indicator. Red = water. White = nothing
Edit, Oh just read your full post.. So you know about the sim one, heh..
But yeah as far as we know, that's the only indicator, however, its not fully visible when you're looking at it through the sim card slot, but if you do RMA it, they'll take it apart thus seeing the whole strip, and part of the strip may show water damage.

MrDarkKV said:
Umm the indicator can only be seen when you take out the sim tray, there's a tiny tiny strip visible on the bottom (inside the sim slot), and that's the indicator. Red = water. White = nothing
Click to expand...
Click to collapse
Good stuff, when I take out the sim card tray the white bit in the slot is white still, should be ok then eh.

Daley87 said:
Good stuff, when I take out the sim card tray the white bit in the slot is white still, should be ok then eh.
Click to expand...
Click to collapse
Hmm if you look through the taredown of the N4
http://www.ifixit.com/Teardown/Nexus+4+Teardown/11781/2
It seems there are two indicators on the mobo protective plastic plating.. Cant be too sure though.
Since its so easy to open the N4 ( no screws), in my opinion it would be best just to take off the back, and make sure those two white squares are clear, and if not.. Just bleach them out

MrDarkKV said:
Umm the indicator can only be seen when you take out the sim tray, there's a tiny tiny strip visible on the bottom (inside the sim slot), and that's the indicator. Red = water. White = nothing
Edit, Oh just read your full post.. So you know about the sim one, heh..
But yeah as far as we know, that's the only indicator, however, its not fully visible when you're looking at it through the sim cad slot, but if you do RMA it, they'll take it apart thus seeing the whole strip, and part of the strip may show water damage.
Click to expand...
Click to collapse
MrDarkKV said:
Hmm if you look through the taredown of the N4
http://www.ifixit.com/Teardown/Nexus+4+Teardown/11781/2
It seems there are two indicators on the mobo protective plastic plating.. Cant be too sure though.
Since its so easy to open the N4 ( no screws), in my opinion it would be best just to take off the back, and make sure those two white squares are clear, and if not.. Just bleach them out
Click to expand...
Click to collapse
Just cracked it open again and those indicators are also white, there is a red dot on the far left but im 99.9% positive thats red pen as other parts are marked in red pen inside the phone (random parts on the ifixit link phone were marked in pen also). I've attached a pic to show.

Daley87 said:
Just cracked it open again and those indicators are also white, there is a red dot on the far left but im 99.9% positive thats red pen as other parts are marked in red pen inside the phone (random parts on the ifixit link phone were marked in pen also). I've attached a pic to show.
Click to expand...
Click to collapse
Yeah, should be fine And I'm also sure thats a random mark, water indicators are normally a more vibrant tint of red.
Good luck with the RMA :good:

MrDarkKV said:
Yeah, should be fine And I'm also sure hats a random mark, water indicators are normally a more vibrant tint of red.
Good luck with the RMA :good:
Click to expand...
Click to collapse
Thanks, should all go well.

Daley87 said:
Thanks, should all go well.
Click to expand...
Click to collapse
Sorry for use this post, but, how was the RMA? Everything ok? It's because i am going to open my nexus to see if its wet or not (damn heavy rain)

Sticker behind battery !!?

Well, just now, I did a battery pull (for no real reason) and under the battery in the lower right hand corner appears to be a sticker. This is outlined by two lines that form an "L". Now what is really concerning is that the sticker appears to be pink. From everything I know about those water damage indicators, if this is in fact a water damage indicator sticker, they are supposed to be white.
I've had this phone for a week..and it has not even been in a humid room or anything, so somebody please tell me I'm not seeing what I think I'm seeing.
What color is your sticker that I referenced above?

delete

wttisme said:
The water damage indicator is actually under the 2 copper prongs by the camera. What you are referring to is actually copper. Try looking at it in direct light and see if you can tell. Hope this helps.
Click to expand...
Click to collapse
Thank you!
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2