Hi all.
Need some help really bad. Tried to upgrade my magician (s100) to ROM 1.11.133WWE from qtek.se.
Did exactly as it said I had to but as soon as I started the upgrading my magician went all dead and black and the install shield wizard went down. The only thing left on the computer screen is a box that says: "checking the information on your device... please wait...
Please dont disconnect your device from your PC until the update is completed".
So what do I do?!?!
Am desperate to get my device working again!
Please please help me!
I'm really sorry to here this ... anyway..
As far as I know.. u have my to disconnect ur PPC from the USB cable, then restart PC, u should continue to upgrade after u PC restarts..
u may also try to change the port of the USB cable as well...
this may work on Win XP, I don't know anything about other OS..
I'm not sure about this since I did not face this problem b4..but this solution was reported in another forum ( and maybe here )
I hope this will help...and maybe someone else could give u more INFO...
cheers
Alive!
Got it working!
Did a couple of reboots and that made the trick...
Now, my only problem is that I cant seem to restore my backup-files
Does anyone know where I can download the free program o2plus that I had earlier? CanĀ“t find it anywhere. Loved that thing...
Thanx!
I believe it is better if u do a new fresh installation of everything instead of making a restoration
many users reported problems when restoring after an upgrade...
mostly, ur device will become very slow ....
Hi,
if i connect my HTC Touch HD with my computer, it's just charging, nothing more. If i go to Bootloader, there is just written Serial even if its connected.
I am using Dutty ROM since some weeks and didn't had any problems till a few days ago, the strange thing is, that i didn't change anything.
I tried it on my laptop and on my computer the one with windows vista the other one with win xp, it worked on both, but not anymoe.
i also have a problem with the camera, if i press it nothing happens it just stays in the menu. Some days ago i got a error failed to initialize camera, but no more error anymore.
In my opinion my hardware is broken somehow, i hope someone in here can tell me sth different and a solution.
And if my hardware is broken, how can flash my original rom back without an usb connection, because the warenty will be gone with a custom rom i think.
I hope someone can help me.
Kryston said:
Hi,
if i connect my HTC Touch HD with my computer, it's just charging, nothing more. If i go to Bootloader, there is just written Serial even if its connected.
I am using Dutty ROM since some weeks and didn't had any problems till a few days ago, the strange thing is, that i didn't change anything.
I tried it on my laptop and on my computer the one with windows vista the other one with win xp, it worked on both, but not anymoe.
i also have a problem with the camera, if i press it nothing happens it just stays in the menu. Some days ago i got a error failed to initialize camera, but no more error anymore.
In my opinion my hardware is broken somehow, i hope someone in here can tell me sth different and a solution.
And if my hardware is broken, how can flash my original rom back without an usb connection, because the warenty will be gone with a custom rom i think.
I hope someone can help me.
Click to expand...
Click to collapse
A hard reset will quickly tell you if it's hardware or software and you don't need usb for that. There is also an option which dictates what the phone does when connected via usb, so you might want to check that option first.
need to read & search a little more
last paragraph of this post outlines how to return to stock rom
http://forum.xda-developers.com/showpost.php?p=2710548&postcount=1
i did hardreset, but still same problem
what i also noticed, is that sometimes my display don't work, i have sound and vibrate feedback, but i see just a black display, softreset etc doesen't work somehow i have to take of the battery.
i noticed also that the usb cable is a bit broken, but it still charges the phone.
but i already saw that normal usb cable should work too, so i tried it but no change.
i guess i will try to get the stock rom again now and see what happens
well like i thought, i can't get the stock rom, because i dont have a usb connection
any more suggestions?
Kryston said:
well like i thought, i can't get the stock rom, because i dont have a usb connection
any more suggestions?
Click to expand...
Click to collapse
There is 2 methods to flashing roms. Have you tried SD card method?
1. Download ROM image you would like to use, normally named RUU_Signed.nbh, and rename it to "BLACIMG.nbh"
2. Copy BLACIMG.NBH into the root dir of your Storage Card.
3. Be sure to have at least 30% of charge.
4. Turn off your device by using the Power Button
5. Go to bootloader mode. Push and hold Vol Down + press Power button.
6. As soon as presented the message, push Power button to start flashing or Volume Down button to cancel.
7. The whole procedure will take about 3 minutes. After you finish and see the relative message, soft reset your device, you are ready.
thanks god i didn't bring the phone to shop yet xD
thank u, i will check this method i will post here if it works later
well now i have another problem
there is written upgrade rom code error please try again on bootloader, i cant turn it on anymore it gets stuck on the loading screen of the flashing progress
Kryston said:
well now i have another problem
there is written upgrade rom code error please try again on bootloader, i cant turn it on anymore it gets stuck on the loading screen of the flashing progress
Click to expand...
Click to collapse
I had this exact same problem a while back after a bad flash. What you need to do is flash carriers orginal stock rom onto device. This will be the only rom which will work. Go to wiki section on stock roms here and download your original rom and flash it. Don't worry if bottom of bootloader is blank or doesn't say 'usb', original rom will flash anyhow.
More info read this thread
i am downloading right now, hopefully it will work, i will write more infos later
thank u for your help, without you, i would be lost...
i am stuck, i get error 206 connection
i downloaded stock rom to my pc
and i'm a bit confused, my pc noticed that i pluged in the phone, my device manager showed my phone, this worked only one time, now nothing...
EDIT: in bootloader mode, serial staus doesnt switch to usb or blank, updateing usb driver doesn't work without usb connection to device, at least i didnt found sth here
i will try it on my other computer now, but i doubt it will work
EDIT2: got usb connection for some seconds, problem is my hardware of device its broken somehow, if i press on th eback of the device i am able to get usb connection, now it failed, i will give it some more tries, there was sth 294 ID error
EDIT3: seems like its the wrong rom, how can i find out which rom will work?
EDIT4: semms like i got a working rom its at 10%
EDIT5: Device working again, usb working perfectly again, dunno why, but camera still doesnt work, there happens nothing if i press on it and display turns black sometimes as before.
i flashed an O2 Rom now, from my provider.
My last question now is, what about warranty, how can i know that uspl/hsapl is fully removed from device and how to find out if device is now a case of warrnty, where can i check it? because i want a working camera again, so i think i need the warranty
Some infos:
O2 Provider ROM flashed
On Bootloader i see:
BLAC100 32M
SPL-1.54.0000
MicroP-Blackstone (LED) v6
In my opinion its fine for warranty, but i want someone to confirm this.
And thank you alot for ur help and work in this forum =)
If you have an official HTC upgrade rom on your device you are fine for warranty. As your SPL says 1.54.0000 this means you haven't got USPL or HSPL on your device, so you're fine.
thank you very much
My Phone does not see USB connection for Activesync but is does see it to charge. Also my PC doesn't see my Phone via the USB
What do I need to do to establish a active sync USB connection
It will connect via blue tooth - but I need the connection back.
Can anyone Help please
P.S. I have used serveral Roms on my device.
try to put ure phone in restore or boot screen mode then try to plug it in , coz it happened to me as well , as i m typing now....
That doesn't work.
I have installed a couple of roms since this issue became an issue but i installed them via the microsD.
Any Other Ideas?
check usb settings
Are you able to connect usb, and see the contents of mirco sd card
sometimes the "usb to pc" setup may be set to disk content instead of activesync
check : settings/system/usb to pc
Ive had this problem a little over a month now, couldnt find a solution neither. For me an error comes up saying "device not recognised" (i opened up the device, checked for any hardware f ups, couldnt find any.. Although it cant be software either coz if flashed so many times after it with the same problem.. Really weird. If you find a solution, id love to know it to.
Regards
Is there way we can raise this so more people can see this issue.
I have install roms before the issue and since it happened I have done via the MicrosSD.
There must be a way of sorting this
Will a task 29 help?
Dark Ninja said:
Ive had this problem a little over a month now, couldnt find a solution neither. For me an error comes up saying "device not recognised" (i opened up the device, checked for any hardware f ups, couldnt find any.. Although it cant be software either coz if flashed so many times after it with the same problem.. Really weird. If you find a solution, id love to know it to.
Regards
Click to expand...
Click to collapse
you could try a task 29 or install a original rom to see if the problem go away
skodann said:
you could try a task 29 or install a original rom to see if the problem go away
Click to expand...
Click to collapse
Sorry I cannot connect to my PC in any way other than bluetooth or MicrosSD so I cannot use Task 29.
I'll try a stock rom.
Does anyone know where to find the latest stock ROM from orange UK
Thanks for the Advice skodann
MOD EDIT - Moved to General discussion as not related to rom development
Task 29 cannot be done because of the USB port not funtioning.. and flashinga stock rom didnt work, maybe it needs to be done by USB?
BTW, should say this before, once you flash stock, you cant go back to HSPL as HSPL can not be flashed without USB..
hey guys i need help i recently flashed to cloudyfa 2.3 rom and im having problems with it. so i decided to switch over... but in unable to do so because whenever i connect my device in SPL mode to flash rom... i hear the attachment of usb sound but the serial on bottom of screen doesnt change to USB and so forth i cannot flash any rom....
i have HSPL 1.56 .....
hispeedworm said:
hey guys i need help i recently flashed to cloudyfa 2.3 rom and im having problems with it. so i decided to switch over... but in unable to do so because whenever i connect my device in SPL mode to flash rom... i hear the attachment of usb sound but the serial on bottom of screen doesnt change to USB and so forth i cannot flash any rom....
i have HSPL 1.56 .....
Click to expand...
Click to collapse
hmmmm maybe a strange thing but could you try a usb port that is directly connected to youre mobo like one of them on the back of youre computer and if that doesnt help try a differnet cable on that port
miniterror said:
hmmmm maybe a strange thing but could you try a usb port that is directly connected to youre mobo like one of them on the back of youre computer and if that doesnt help try a differnet cable on that port
Click to expand...
Click to collapse
hey chris... glad to see you here... but unfortunately i tried both... different ports and different cables.... the problem still remains... and the worse part is that the current rom im using its not working on my cell at all... cell freezes more than randomly and doesnt even restart. i have to take the battery out wait 10 secs than reinsert to start it again and it keeps messing up my clock time to plus 1 hour even though daylight saving is turned off in this rom
EDIT: Fixed the problem...somehow my htc driver on windows 7 had gotten corrupt... deleted it and reinstalled the drivers and its working fine now... thanks alot for the help CHRIS
hi tried to install a new rom it was the htc android one everything was working fine until i switched it of now all that happens is i switch itn on and its keeps saying wait loading with a picture of a bird and a android robot on cant connect by usb as i did something to usb setting something about debugging usb now it wont recognise phone when i connect pls help
Hi
First don't panic
2 Go there http://forum.xda-developers.com/index.php and roll down until you find your device's forum
3 Read as much as you can, your problem has probably been presented by someone else
4 If not, post it there
Good luck
You must specify what device you have, and which ROM you flashed.
Also post the issue in the ROM thread not here.
Read well before flashing next time.
Thread closed.