Database Users

Wifi problem

I hope someone can help me. My new xda exec will not detect wifi anywhere. I can get it to work when sync lead to my laptop but I just found out it is routing to my laptops network connection. I have gone through all the settings and cannot find anything wrong it just keeps on saying scanning network

Hi Simba1623,
I'm new to XDA's but have been playing with WiFi networks for a while.
So i'll have a couple of guess's :wink:
Is the router broadcasting its SSID ?
Do you have spare IP's available ?
Have you added the MAC address if you've got MAC flittering switched on ?
All are common causes for devices not finding the network.

Thanks for responding. The id issue is sorted as when I first setup the xda it did work and asked me for password and worked fine. Then the following day stopped. There is plenty of address left and it won't work anywhere. Regarding mac address I have no idea but will cheack with a friend. When I bought the XDA I was assured it would pretty much work out of the box...... and it did for one day Thanks again :?

Try to delete the connection settings associated with your router (in the wireless manager), hopefully that should allow you to "discover" the router again and fingers crossed it should stay working

Thanks I just I tried that. It didn't work straight away but following full shutdown and battary removal it seems to be working now. Fingers crossed it stays

Wifi signal almos DEAD, very strange
Hi, My O2 Exec has problems with the WIFI connection, no matter where I go, if O2 Exec isn't really near the access point, will not detec or connect to the wireless network.
when I say near, is around 1 meter from the access point antenna, if I go more tham 3 meters, goes almot 100% oofline and 4 meters even detect. It happens at home and at work, in both locations my laptop works fine 40m from the access point and my nokia 9500 (cel I used to have) goes 30m, I've made this tests of distance today.
So... seems to be on My O2Exec the problem... ... I think started when I upgraded the ROM to latest build available at my-xda.
Please, any clue? I already changed performance/battery from the control panel/wireless and even reset many times, updated the rom again.. no clue at all...
HELP!!!!

mac address
hi,
i am new to networking esp. wifi. i am not sure how and from where can i get mac address for my device, its a siemens sx66 (w/o cam) have upgraded to ivan's latest rom. please help

o2 atom wifi issues
Hi there,
I also have had the same problems with my o2 Exec, when I first turned it on, it wouldn't detect any access points, after driving myself nuts with trying to work out what was wrong, I eventually put it down to the phone. so I rang O2 and they told me to send it back. Strangely just after that phone call it detected the network and has been working fine. Until last night when it decided that it couldn't connect again. It still sees the network, but will not connect, even though it says that it is available.
Also a couple of days ago the speakers in the phone stopped working after I used the radio with the headset. After putting the headset back in and pulling it out about 20 times. it did work again. but not before I went CRAZY AND HARD RESET THE DAM THING.
I hate this phone, I have owned the o2 mini and the jasjam, this is the worst of them........
I am selling mine as soon as I get O2 to replace this piece of crap.

How I solved Wifi problem

Lately I have been reading many post related to Wifi problems in the HD. I had the same. Even I was very near my router I couldn't connect to the net and the signal was very weak.
So I entered my router configuration and I found a solution.
Before, for security options I had: WPA-PSK [TKIP] then I changed to WPA2-PSK [AES] (of course you also have to change your HD connection configuratoin), and now it works great¡¡¡¡
Now I have all the bars for the signal and I can connect very easily.
Hope it works for other people

I have a similar WiFi connectivity problem, but after reading of the poor service provided by most vendors and HTC itself, I will try to gather some more experience with the problem before I contact HTC or my vendor, and hopefully find a solution. Bellow is my experience so far:
I own an HTC Touch HD since January and have a similar problem, only it surfaced last week. Before I had only used the WiFi connectivity briefly. The problems started after I installed an AP on my house expressively for the new PDA. The node is fully open and set to B/G/N protocols.
After a couple days of medium (couple hours per day) use the WiFi connection suddenly quit, the device would try to connect (the top bar showing the WiFi connection animation continuously) and after a few moments gave up with a dialog box stating the current network settings were wrong (even thou they worked fine a few hours earlier).
I tried several hot and cold resets, but only solved the problem after flashing a new ROM; even then the same symptoms reappeared after a couple of days of regular use. Again no re-setting would cure the problem, and now not even flashing the ROM again would work. Nonetheless, some hours latter the WiFi would connect perfectly with the same nodes it refused to before, and in very short time.
I have witnessed this cycle twice and have yet not been able to find a trigger for it, but will keep my eyes open for any tell tale signs, and post any findings here.

I could add to the above mentioned problems.
i got a new hd just few days back.
The wifi worked great. But now it doesnt.
I have disabled wifi, so can start it whenever i require.
I click on wifi button to enable it.
Then open opera, try any website.
it will open fine.
For instance say my email at gmail.com
Now after that if i try to open anysites or even continue with my mail, it shows error saying connection not available.
One of the workaround is to go back to toggele wifi off and switched it on.
Not sure if anyone faces a similar issue.

I's been about a week since my last post and I have already witnessed a couple of cycles of WiFi connecting perfectly and then not connecting at all.
No matter the settings I try after it decides not to connect, it won't. Even to nodes it had connected perfectly and fast jus minutes before.
I thought re-flashing might help but so far has proven ineffective. Once I thought some part of the non-volitile memory was causing the problem since after I cleared the memory I could connect for a while.
Any thoughts anyone?

Same problems here.
For the last hour I have been reading 10ths of threads here concerning WiFi problems.
My HD's WiFi worked fine on my home and outside for about 2 months. Now it doesn't. It reports connection, but no program can use the internet. At best, it seems to be able to exchange some Kbytes the for just a few seconds after a connection is established. Then nothing. Connected but unusable.
Tried everything Internet/My Work/My ISP, WAP enabled/disabled, soft/hard reset, everything.
When connected through ActiveSync everything works fine, all programs see internet.
Has anybody taken their HD to the service? Has any HTC service worldwide identified the problem as hardware and solved it by replacing something?

miskasp said:
Lately I have been reading many post related to Wifi problems in the HD. I had the same. Even I was very near my router I couldn't connect to the net and the signal was very weak.
So I entered my router configuration and I found a solution.
Before, for security options I had: WPA-PSK [TKIP] then I changed to WPA2-PSK [AES] (of course you also have to change your HD connection configuratoin), and now it works great¡¡¡¡
Now I have all the bars for the signal and I can connect very easily.
Hope it works for other people
Click to expand...
Click to collapse
I have just encountered a similar problem, but already used wpa/wpa2 with aes. Have tried a hard reset with no joy. My old HTC Touch has no probs connecting via wifi nor does my laptop so I would surmise that the prob is with the HD and not the router.
I am going to try flashing with the latest version of Duttys 6.1 rom and see what gives.
Edit: Tried flashing with new rom with no success. Take a look at this post.
http://forum.xda-developers.com/showpost.php?p=3769339&postcount=7
There are a couple of files to download but i only used the second ie this one.
http://forum.xda-developers.com/showpost.php?p=1363759&postcount=2
Now no problems and can connect via wifi no probs, ip address assigned by dhcp.

Try to go into WiFi settings and move the power slider to max performance. I need to do it here to access my router. This happened also with my HTC TyTN II, with any recent radio firmware. The original WM 6.0 ROM and it's radio work fine in low power mode, but the new ones appear connected but are always at 1 Mbps and there's no traffic until you move the slider to performance mode.

You go into WiFi settings and you configure manual IP and DNS so as router.
DNS is important.
Whit manual configuration, Wifi work always.
(sorry for my english)

Dubh Llas said:
There are a couple of files to download but i only used the second ie this one.
http://forum.xda-developers.com/showpost.php?p=1363759&postcount=2
Now no problems and can connect via wifi no probs, ip address assigned by dhcp.
Click to expand...
Click to collapse
Yeah, but what if I 'm not Orange-UK (let alone UK) ?
vcespon said:
Try to go into WiFi settings and move the power slider to max performance.
Click to expand...
Click to collapse
1st thing I did. Problem still there.
campotino said:
You go into WiFi settings and you configure manual IP and DNS so as router.
DNS is important.
Whit manual configuration, Wifi work always.
Click to expand...
Click to collapse
This is not a solution. I didn 't buy the device to be able to connect to my home WiFi only. What about public hotspots? Or hotels? Or whatever outside your home?

[Q] No Wifi and Bluetooth Connection

Some days ago i got my HD back from service because of the vibration problem and i was happy.
BUT now i can't connect via bluetooth or wifi. My HD finds no network or any bluetooth device. Even after a hardreset and restoring factory defaults there's no chance to connect to any network or even find my HD with another bluetooth device.
Think i have to send it again to service

Hi, you're not the only one...
My HD was at the service for the second time to fix a rattling noise in or near the camera when vibrating.
This time they at least managed to reduce the rattling...wow ! But when i actived the wifi the HD didn't find any networks - normaly it found 5.
I think they forgot to connect the wifi-antenna or damaged it. When I hold the phone right next to my router it finds my network, but already at a distance of 10cm it loses the signal... Think I have to reactivate my good old HTC Prophet again.

I tried the same and get the same result. direct next to the router antenna i get a network connection but at a distance of ~10cm the connection get lost.
has the bluetooth receiver also an antenna? because i dont get any bluetooth connection at all.

Same
Same problem for me. I just received my touch HD and wifi is not detected when I'm more than 3 meters away from the modem ...
Same for bluetooth : bluetooth devices are not detected if they are for than 50 cm away from the touch HD. So there is a real problem.
That's why I've contacted the shop and I will send it back ; they will refund me and I'll order an new one !

And another one...I also had the permanent vibration problem, got my device back and...TADA!...nearly no WLAN (the first meter away from my router worked, yay!). I thought it was the crappy company, which repaired the device the first time, but it seems like it's an international problem
Was always a fan of HTC devices but I'm starting to think of buying a Nokia Symbian v5 device the next time
vibrate issue defect broke receipt reception receive bad bluetooth

any solutions ? i also have bluetooth and wifi issues

Wi-Fi can't connect

Just load Energy 23569 ROM onto my Touch HD Touch and everything seems ok except Wi-Fi .. i can't connect to my home Wi-Fi after keying in the authentication passcode .. it just keep showing Red icon of WiFi ... i'm not too sure if there something to do with the Advanced Config settings ...

I have the same issue.
How is this solved ??
Thanks
Ciao
Mike

i have problem with wifi too.phone cant see wifi network even whan i stand right next to router.one time phone found network, but only poor signal and i wasnt be able to connect. wifi goes well on another mobiles like SE X10 and samsung JET. i changed several roms but problem stays.. i dont know what to do..thx

Htc hd wifi problems
I just guess it´s some kind of incompatibility with certain WIFI APs.
I tried several other now:
Netgear 834 - complete catastroph
T-KOM 500WV - runs immediately
So I think it´s the best to change the router.
The device:
Speedport 500V is at least the one that does the job in my network.
Fritz (2 types I don´t know exactly but little older though), Netgear (834), Sparklan - these did NOT WORK
Speedport W500V- just basic setting (WEP 128Bit, ASCII) immediatlety connected to the HTC. Tested with WFI-MONSTER.
I think I´ll get a hold of some of these, they are pretty cheap (20 €) here now.
Hope it helped a little
Ciao
Mike

Hi Guys,
I had the same problem the entire week last week. I tried upgrading the radio, downgrading the radio, several different roms, until I finally realized what the cause was.
Wifi would work right after the first hard reset after flashing a new rom or radio, but I noticed that it wouldn't connect to any of my wifi routers after installing all my apps and restoring configurations.
I noticed that after enabling "WPA authentication" on Advanced Configuration, wifi would stop working. Leaving it disabled would let it work normally. I don't understand why, but there you go. I haven't had a problem with any router since.
Hope this helps.

Annoyances and bugs in Xperia X2 MR2-Release [Updated 3 July 2010]

Hi all!
I started again a new thread where i write down my findings in the MR2 release of the X2. It's originally on the Esato-forums, so i just put the link over here:
http://www.esato.com/board/viewtopic.php?topic=196737

Nice THKS.

7. When hanging up a phonecall, the phone makes three loud beeps via the rear speaker. WHY???
same here... but only if the person u talk to hangs up first. its so annoying.

Lerka said:
7. When hanging up a phonecall, the phone makes three loud beeps via the rear speaker. WHY???
same here... but only if the person u talk to hangs up first. its so annoying.
Click to expand...
Click to collapse
YEp, and having the phone on silent does not make things better either...

Fix
i used registry editor and changed the value of calldrop from p(play) to none.

Rene,
when you hear 3 tones after call finish - is bluetooth activated in this moment for your x2? For example, do you use BT connection to your X2 in your car (handsfree)? Do you think that there is some special requirements for BT headset using to generate this sound on main unit if call was finished?
when you see bad power consumption results - is wifi activated in communication manager in your X2? I think that if you activate wifi - it can be reason for huge additional current if unit can't find appropriate wifi network for some reason.
For example, I found that if I activate wifi - I always should connect unit to charger every day. Then I found that this is specific issue only for me. The specific way of my wifi using is followed - I use 2 different wifi connections to my X2 (on home - secured network through router and in office - open wifi network). I do have connection issues every morning in office and every evening in home. Even if my X2 reports that it's connected to office network - I can see in status bar in Today screen that it's trying to conect again and again - and also I can't use browser or Goggle maps because no data connection is available through wifi. After I power off/on my unit - it can really connect to office wifi network and I can use browser and receive mails e t.c. When I return to home, I see that unit still be connected to office network - but it's impossile. And again - I can't use browser or receive mails by using my X2. After I power off/on unit - it can connect to home network. I can't fix issues in office and in home just turn off/on wifi in communication manager - issue still be actual after this. So, what I do every day - I turn off/turn on my unit every morning after arrive to office and again power on/ power off unit every evening when arrive home So I should spent 2 minutes every morning and 2 minutes every evening to reboot unit. On other hands I think that this is step to avoid more serious issues after couple of days of Windows using - you know usially you can see performance degradation after 1 week of using of any WinMob device - looks like this is result of lot of memory leaks, memory corruptions inside MSFT SW.
if we are talking about unexpected password issue or issue when you can't unlock unit by LOCK icon sliding left or right after press on power on button - for me it looks like memory is corrupted in MSFT lock app. As result some password is requested even if user never activates this password for lock screen. But it's clear that in reality, unit doesn't story in memory any password to compare with entered one - otherwise after power off/on sequency unit still ask password from you. But as I see in the same situation with my X2 - after I remove/insert battery and power on unit - I never see again this issue just after unit goes to Idle.
I think that memory, which is used by MSFT Lock code, can be corrupted only in scope of the same Windows process (of cause if memory is isolated for all processes in WinMob - I hope it's true) - so only other MSFT code can corrupt this memory. Do you know about any public forum where we can ask help from MSFT to see in this issue? I never see that Aaron wrote anything about any contacts in MSFT - but I think that MSFT should be also responsible for any product if Windows logo is applyed to device with WinMob?
To reduce the probability of this issue I never use AutoLock and always lock unit by click on Lock icon in Today panel or by long press on right HW kwy (with key sign).

darkbuster5 said:
i used registry editor and changed the value of calldrop from p(play) to none.
Click to expand...
Click to collapse
IT WORKED!!!
thank youuu

wifi
Hi! I have a similar issue with the wifi that PanichUS described.
The phone sees the network, tells that it's available, but I am not able to connect to it (so I can not do internet browsing, read the emails, etc.)
This happened to me while switching from one network to another, which were in two different places (and the phone was showing the network still available of the place I have already left). But in my case rebooting the phone did not help.
This is not the only case. The same thing also happens to me after I use bluetooth. The phone is connected to the wifi network (I could do internet browsing, etc.), I use bluetooth, and after that I can no more recover the connection. Again it shows that the network is available, but I can not connect to it.
The only thing which helped by now was restarting my house router.
Is the MR2 the last release of the firmware by date? I have bought my phone recently, and for me it seems that it was updated: I have radio, and the theme with grey background (X2 Titan) was activated in the very beginning.

MR2 is last update for X2. Don't wait another update.
Try turn off Wifi in Communication manager before power off and turn on Wifi back in Communication manager after power on.

Wifi
I have discovered that in fact I don't have problem to connect when using an open network, while with the protected one is always an issue.
Reboot of the phone doesn't change anything even if before doing it I switch off wifi in the connections manager and delete all the settings. Nothing - only reset of the router what helps.
I also tried to use other software (Wifi Monster) - the same thing.
The phone is really wonderful, it really has it's spirit with all these panels and generally the interface, but the wifi issue is really annoying!

My advice - don't install Resco Photo manager on X2.
Great app but works very bad on X2.

I instaled older version Resco.Photo.Manager 7.03. This work good.
Wisbaradvance 4.05 is verry unstable,problems and problems.