Some days ago i got my HD back from service because of the vibration problem and i was happy.
BUT now i can't connect via bluetooth or wifi. My HD finds no network or any bluetooth device. Even after a hardreset and restoring factory defaults there's no chance to connect to any network or even find my HD with another bluetooth device.
Think i have to send it again to service
Hi, you're not the only one...
My HD was at the service for the second time to fix a rattling noise in or near the camera when vibrating.
This time they at least managed to reduce the rattling...wow ! But when i actived the wifi the HD didn't find any networks - normaly it found 5.
I think they forgot to connect the wifi-antenna or damaged it. When I hold the phone right next to my router it finds my network, but already at a distance of 10cm it loses the signal... Think I have to reactivate my good old HTC Prophet again.
I tried the same and get the same result. direct next to the router antenna i get a network connection but at a distance of ~10cm the connection get lost.
has the bluetooth receiver also an antenna? because i dont get any bluetooth connection at all.
Same
Same problem for me. I just received my touch HD and wifi is not detected when I'm more than 3 meters away from the modem ...
Same for bluetooth : bluetooth devices are not detected if they are for than 50 cm away from the touch HD. So there is a real problem.
That's why I've contacted the shop and I will send it back ; they will refund me and I'll order an new one !
And another one...I also had the permanent vibration problem, got my device back and...TADA!...nearly no WLAN (the first meter away from my router worked, yay!). I thought it was the crappy company, which repaired the device the first time, but it seems like it's an international problem
Was always a fan of HTC devices but I'm starting to think of buying a Nokia Symbian v5 device the next time
vibrate issue defect broke receipt reception receive bad bluetooth
any solutions ? i also have bluetooth and wifi issues
Related
I hope someone can help me. My new xda exec will not detect wifi anywhere. I can get it to work when sync lead to my laptop but I just found out it is routing to my laptops network connection. I have gone through all the settings and cannot find anything wrong it just keeps on saying scanning network
Hi Simba1623,
I'm new to XDA's but have been playing with WiFi networks for a while.
So i'll have a couple of guess's :wink:
Is the router broadcasting its SSID ?
Do you have spare IP's available ?
Have you added the MAC address if you've got MAC flittering switched on ?
All are common causes for devices not finding the network.
Thanks for responding. The id issue is sorted as when I first setup the xda it did work and asked me for password and worked fine. Then the following day stopped. There is plenty of address left and it won't work anywhere. Regarding mac address I have no idea but will cheack with a friend. When I bought the XDA I was assured it would pretty much work out of the box...... and it did for one day Thanks again :?
Try to delete the connection settings associated with your router (in the wireless manager), hopefully that should allow you to "discover" the router again and fingers crossed it should stay working
Thanks I just I tried that. It didn't work straight away but following full shutdown and battary removal it seems to be working now. Fingers crossed it stays
Wifi signal almos DEAD, very strange
Hi, My O2 Exec has problems with the WIFI connection, no matter where I go, if O2 Exec isn't really near the access point, will not detec or connect to the wireless network.
when I say near, is around 1 meter from the access point antenna, if I go more tham 3 meters, goes almot 100% oofline and 4 meters even detect. It happens at home and at work, in both locations my laptop works fine 40m from the access point and my nokia 9500 (cel I used to have) goes 30m, I've made this tests of distance today.
So... seems to be on My O2Exec the problem... ... I think started when I upgraded the ROM to latest build available at my-xda.
Please, any clue? I already changed performance/battery from the control panel/wireless and even reset many times, updated the rom again.. no clue at all...
HELP!!!!
mac address
hi,
i am new to networking esp. wifi. i am not sure how and from where can i get mac address for my device, its a siemens sx66 (w/o cam) have upgraded to ivan's latest rom. please help
o2 atom wifi issues
Hi there,
I also have had the same problems with my o2 Exec, when I first turned it on, it wouldn't detect any access points, after driving myself nuts with trying to work out what was wrong, I eventually put it down to the phone. so I rang O2 and they told me to send it back. Strangely just after that phone call it detected the network and has been working fine. Until last night when it decided that it couldn't connect again. It still sees the network, but will not connect, even though it says that it is available.
Also a couple of days ago the speakers in the phone stopped working after I used the radio with the headset. After putting the headset back in and pulling it out about 20 times. it did work again. but not before I went CRAZY AND HARD RESET THE DAM THING.
I hate this phone, I have owned the o2 mini and the jasjam, this is the worst of them........
I am selling mine as soon as I get O2 to replace this piece of crap.
My HTC HD has WIFI Problem: WiFi will not turn on most of the time.
After tapping the Wi-Fi Switch (in Communications Tab) it hangs for about 7 seconds then stops.
Sometimes after 6 seconds the wifi Icon will appear for 1/2 a second but then disappears.
The only way I can get it to connect at all is if the device is cool and I remove the battery for a while....
...Then restart it and Wi-Fi will switch on sometimes (but fail most of the time).
I have flashed the ROM (by different Cookers) many times, Hard Reset the device many times, and used all different power settings: Still no good.
If error reporting is ON I get error message "device.exe' problem.
As I live in Australia I would have to pay heaps for freight if I send it back to UK so I'm loath to do so.
Anybody know what should I do to fix it?
(PS. My old Diamond connects every time)
I have a similar WiFi connectivity problem, but after reading of the poor service provided by most vendors and HTC itself, I will try to gather some more experience with the problem before I contact HTC or my vendor, and hopefully find a solution. Bellow is my experience so far:
I own an HTC Touch HD since January and have a similar problem, only it surfaced last week. Before I had only used the WiFi connectivity briefly. The problems started after I installed an AP on my house expressively for the new PDA. The node is fully open and set to B/G/N protocols.
After a couple days of medium (couple hours per day) use the WiFi connection suddenly quit, the device would try to connect (the top bar showing the WiFi connection animation continuously) and after a few moments gave up with a dialog box stating the current network settings were wrong (even thou they worked fine a few hours earlier).
I tried several hot and cold resets, but only solved the problem after flashing a new ROM; even then the same symptoms reappeared after a couple of days of regular use. Again no re-setting would cure the problem, and now not even flashing the ROM again would work. Nonetheless, some hours latter the WiFi would connect perfectly with the same nodes it refused to before, and in very short time.
I have witnessed this cycle twice and have yet not been able to find a trigger for it, but will keep my eyes open for any tell tale signs, and post any findings here.
What I found out is that If you are using CommManager in TF3D together with other wifi mgr it screws up the wifi. Either you use CommManager or you use 3rd party one but not both at the same time.
Agreed!
Yes I agree completely; something on the permanent storage area got corrupted last week after I installed WiFi Monster (which I like, and recommend, only not at the same time as the standard connection manager).
I managed to get the WiFi conection working again (if only for a couple of days...) by doing the Start>Settings>Clear Storage thing and following the re-install.
Ok, so at least now I know of one more thing that can screw up th HD's WiFi besides itself!
i cant connect to my wifi in my same bedroom !!!
Enhancing WiFi performance
If you get very low range, or frequent connection interruptions, it might help to go to: Settings>Connections>Wi-Fi>Advanced>Power Mode and set it to "Best Performance"
PS. I wonder if anybody gets intermittent WiFi problems like myself. One day it works perfectly, the next it will not connect showing a dialog box: "Warning Cannot connect to the network. Check your network and service provider settings and try again"
Dear all,
I recently bought the HTC HD2. First time boot went smoothly & without problems. I then wanted to play around with the WLAN functionalities (as this is quite important for me). However, I didn't notice any WLAN networks. Only by holding the device next to the WLAN router (DLINK DIR-655), I received a very weak signal (1 bar). I redid the test on a Linksys router (WRT160-N), with the same results. When I got back home in my WLAN infested appartment (+10 that surround me), I was suprised to see not even 1 WLAN network.
BlueTooth acts the same. Only sometimes I can discover other devices: so far only my Mini Cooper is paired, my notebook with Intel WLAN 5300 doesn't even see the device (both are "bi-discoverable"). It's however impossible to have a decent conversation using the Mini cooper as "headset" and phonebook syncing times out. Result: calling handsfree is impossible...
I then updated the radio (LEO08610-03.exe, sorry can't remember the exact version, only the filename), unfortunately without any result.
I kept the default ROM, which is 1.66.405.2 (76641) WWE
From my experience with PDA/smartphones, it looks as if there's an isolation problem, causing interference or another hardware issue linked to both BT & WLAN antennas.
However, before sending the device back and miss it for some weeks/months, I was hoping maybe someone else experienced the same issue(s) & was able to solve it him/herself.
I thank you in advance for your help.
Solved
As I thought, it was a hardware issue. Both WLAN & BT where affected.
I received a new device the same day I brought it in the store, talking about good service!
Thumbs up for pdashop.be!
Hi all!
I started again a new thread where i write down my findings in the MR2 release of the X2. It's originally on the Esato-forums, so i just put the link over here:
http://www.esato.com/board/viewtopic.php?topic=196737
Nice THKS.
7. When hanging up a phonecall, the phone makes three loud beeps via the rear speaker. WHY???
same here... but only if the person u talk to hangs up first. its so annoying.
Lerka said:
7. When hanging up a phonecall, the phone makes three loud beeps via the rear speaker. WHY???
same here... but only if the person u talk to hangs up first. its so annoying.
Click to expand...
Click to collapse
YEp, and having the phone on silent does not make things better either...
Fix
i used registry editor and changed the value of calldrop from p(play) to none.
Rene,
when you hear 3 tones after call finish - is bluetooth activated in this moment for your x2? For example, do you use BT connection to your X2 in your car (handsfree)? Do you think that there is some special requirements for BT headset using to generate this sound on main unit if call was finished?
when you see bad power consumption results - is wifi activated in communication manager in your X2? I think that if you activate wifi - it can be reason for huge additional current if unit can't find appropriate wifi network for some reason.
For example, I found that if I activate wifi - I always should connect unit to charger every day. Then I found that this is specific issue only for me. The specific way of my wifi using is followed - I use 2 different wifi connections to my X2 (on home - secured network through router and in office - open wifi network). I do have connection issues every morning in office and every evening in home. Even if my X2 reports that it's connected to office network - I can see in status bar in Today screen that it's trying to conect again and again - and also I can't use browser or Goggle maps because no data connection is available through wifi. After I power off/on my unit - it can really connect to office wifi network and I can use browser and receive mails e t.c. When I return to home, I see that unit still be connected to office network - but it's impossile. And again - I can't use browser or receive mails by using my X2. After I power off/on unit - it can connect to home network. I can't fix issues in office and in home just turn off/on wifi in communication manager - issue still be actual after this. So, what I do every day - I turn off/turn on my unit every morning after arrive to office and again power on/ power off unit every evening when arrive home So I should spent 2 minutes every morning and 2 minutes every evening to reboot unit. On other hands I think that this is step to avoid more serious issues after couple of days of Windows using - you know usially you can see performance degradation after 1 week of using of any WinMob device - looks like this is result of lot of memory leaks, memory corruptions inside MSFT SW.
if we are talking about unexpected password issue or issue when you can't unlock unit by LOCK icon sliding left or right after press on power on button - for me it looks like memory is corrupted in MSFT lock app. As result some password is requested even if user never activates this password for lock screen. But it's clear that in reality, unit doesn't story in memory any password to compare with entered one - otherwise after power off/on sequency unit still ask password from you. But as I see in the same situation with my X2 - after I remove/insert battery and power on unit - I never see again this issue just after unit goes to Idle.
I think that memory, which is used by MSFT Lock code, can be corrupted only in scope of the same Windows process (of cause if memory is isolated for all processes in WinMob - I hope it's true) - so only other MSFT code can corrupt this memory. Do you know about any public forum where we can ask help from MSFT to see in this issue? I never see that Aaron wrote anything about any contacts in MSFT - but I think that MSFT should be also responsible for any product if Windows logo is applyed to device with WinMob?
To reduce the probability of this issue I never use AutoLock and always lock unit by click on Lock icon in Today panel or by long press on right HW kwy (with key sign).
darkbuster5 said:
i used registry editor and changed the value of calldrop from p(play) to none.
Click to expand...
Click to collapse
IT WORKED!!!
thank youuu
wifi
Hi! I have a similar issue with the wifi that PanichUS described.
The phone sees the network, tells that it's available, but I am not able to connect to it (so I can not do internet browsing, read the emails, etc.)
This happened to me while switching from one network to another, which were in two different places (and the phone was showing the network still available of the place I have already left). But in my case rebooting the phone did not help.
This is not the only case. The same thing also happens to me after I use bluetooth. The phone is connected to the wifi network (I could do internet browsing, etc.), I use bluetooth, and after that I can no more recover the connection. Again it shows that the network is available, but I can not connect to it.
The only thing which helped by now was restarting my house router.
Is the MR2 the last release of the firmware by date? I have bought my phone recently, and for me it seems that it was updated: I have radio, and the theme with grey background (X2 Titan) was activated in the very beginning.
MR2 is last update for X2. Don't wait another update.
Try turn off Wifi in Communication manager before power off and turn on Wifi back in Communication manager after power on.
Wifi
I have discovered that in fact I don't have problem to connect when using an open network, while with the protected one is always an issue.
Reboot of the phone doesn't change anything even if before doing it I switch off wifi in the connections manager and delete all the settings. Nothing - only reset of the router what helps.
I also tried to use other software (Wifi Monster) - the same thing.
The phone is really wonderful, it really has it's spirit with all these panels and generally the interface, but the wifi issue is really annoying!
My advice - don't install Resco Photo manager on X2.
Great app but works very bad on X2.
I instaled older version Resco.Photo.Manager 7.03. This work good.
Wisbaradvance 4.05 is verry unstable,problems and problems.
Hi, I've some problem with wifi connections. I own a lynksis wag54g2 wifi router. I can establish a connection, but after some times (it's not standard, it may vary), my device disconnect from the router and it's not able to reconnect. All that i can do is plug off my router (i take off the ac adapter) and when it's up again my phone can connect. it's very frustating, but i don't know what to do? i've tried setting something in wifi preferences' on my phone but nothing change. i've also flashed my firmware to the new one, hoping that it could fix that problem, but it didn't. someone could help me?
you can update the firmware to a newer one. this would fix your problem.
forum.xda-developers.com/showthread.php?t=781149
Hello.
I have a problem with WIFI on Galaxy 5 (i5500)(Europa) too. They have already changed my phone with new one, but the issue remains. So, for the second time now, I was able to connect my phone to my router for the first time, but after the first interruption or disconnection of WIFI I could not access to wifi anymore.
When I enable wifi in the phone starts ''connecting'' but then reports ''interrupted'' eventhough the signal is recognised as strong.
Firmwire version is the latest available. Router is encrypted with WPA2. Also I can access to router with my HTC Tattoo (Click).
Does anyone know the solution?
I have a decision to make(today), becouse If there is no solution to this I will change to another phone as I still can (Galaxy Spica).
Advise please.
Thanks a lot
What router do you have? have you tried with any other wifi network? i said that because my have this problem only with my router, and not for example with my girlfriend's one.
I found a little fix for my router, linksys wag54g2: open up the config page (192.168.1.1), go for wireless tab, select protection page and click on save settings. that reload the router and my phone is able to connect again.
Hi.
Thanks for your advice. There is some problem with router.. When I restart router the wifi on the phone works until swiched off or interruption becouse being out of range. When I try to connect to wifi again does not work unless I restart router again. ..catchy.. Interfering with mobile connection also makes the drop of wireless connection on my computer, so I need to restart router. I don't know the permanent solution. If anyone has any idea how repair this forever please let me know.
Best,
Thanks
Hi,
Here is my problem with my wifi with the galaxy 550.
For security reasons, my wifi network can't be detected (invisible). If i want to connect a new device by wifi, I must first set my wifi visible and then register my device.
Then I set my wifi as invisible again and the device can connect automaticaly to my network without "seeing" my wifi network.
Problem is that once i set my wifi as invisible again, my galaxy fail to connect because the network is unvisible.
Is there anyway to fix this ?
I have just read similar post on another thread and replied find it here
I ahvent installed anything, perhaps its to do with the handset if its locked to a particular carrier? just a guess and a question...
cheers
helper
try to use static ip!!
CaptainTim said:
Hi,
Here is my problem with my wifi with the galaxy 550.
For security reasons, my wifi network can't be detected (invisible). If i want to connect a new device by wifi, I must first set my wifi visible and then register my device.
Then I set my wifi as invisible again and the device can connect automaticaly to my network without "seeing" my wifi network.
Problem is that once i set my wifi as invisible again, my galaxy fail to connect because the network is unvisible.
Is there anyway to fix this ?
Click to expand...
Click to collapse
I have an answer! Hope it works for you.
My provider gave me really easy solution for wifi connection not connecting even though it was my own network with all the right info. It worked great the first time, then for some reason the phone locked in the "off" position. So I removed the battery to reboot (later learned the right way by pushing the volume button on the left and the power button at the same time)
Anyway, try this....
turn phone off - remove battery - remove sim card - wait a few minutes - reassemble - then the network should log on with no problem.....Good luck!
HeiDuDer said:
try to use static ip!!
Click to expand...
Click to collapse
Didn't work :/
Super1285 said:
I have an answer! Hope it works for you.
My provider gave me really easy solution for wifi connection not connecting even though it was my own network with all the right info. It worked great the first time, then for some reason the phone locked in the "off" position. So I removed the battery to reboot (later learned the right way by pushing the volume button on the left and the power button at the same time)
Anyway, try this....
turn phone off - remove battery - remove sim card - wait a few minutes - reassemble - then the network should log on with no problem.....Good luck!
Click to expand...
Click to collapse
Didn't work neither.
I have same problem after upgrading to 2.3.5 Wi-Fi shown as it is Active, but it is turning off and on and scaning and off again all times
htc tattoo
hellllllllllllllllllllllllllllllllllllllllllllllll llllllllp hellllllllllllllllllllllllllllllp
heeeeeeeeeeelp
helppppppppppppppppppp
I have same problem after upgrading to 2.3.5 Wi-Fi shown as it is Active, but it is turning off and on and scaning and off again all times
I have same problem after upgrading to 2.3.5 Wi-Fi shown as it is Active, but it is turning off and on and scaning and off again all times>>>>>>>>>>>>>>