OMFG i'm geting crazzzy!!!!
i'll try to come down.
I have tryed for 5 hours, to get the USB/adb driver to work..
I have tryed on win xp home and vista business.
Old time i do it on my ohter htc with no problemer, but not its ****ing!
So what i'm asking for is, can some one help me over skype/teamviewer??
my skype is izzii.dk
Try installing HTCSync - you should find it on your SD card that came with the phone.
Related
Hi,
Can anyone please tell me why my Omnia II (i8000) is not detected by ActiveSync or Windows Mobile Device Center? I'm tired of trying and very close to giving up hope.
Can you please help me with the issue?
First try on another computer. Then you know more and you can search this site.
I tried with 5 computers. Do I need more?
well i have the opposite case ... everytime a connect mine it detects a new phone .....
In win xp just a one time installation of activesync 4.5 then reboots afterwards then install pc studio that came with a cd or download the latest one.
i had this kind of problem with WMDC running in win 7 ultimate.
what i did was
1. install the pc studio sw (use compatibility mode as win vista sp1) then reboot
2. when u plug the O2 it will try to find the driver but will fail to install.
3. uninstall WMDC thru add/remove programs
4. when u go to dev mgr u will see I8000 with "Question Mark" meaning driver doesnt install properly( pretty much obvious..)
4. try to update the driver manually it says to search driver thru internet select that option if u miss it.. ur next option is to run windows update
5. win update will try to find the latest patch and driver update for ur system. (ur phone shuld be connected to pc at this moment) so that it will find the hardware update available for your pc.
6. go to "hardware option" on the windows update, if u see the "MIT USB Sync" thats the driver for your omnia 2, select that and install it right away..once finish reboot while phone are still connected.
7. if it doesnt find the hardware update on first run..reboot and try it again..( it took me several hrs before it finds the mit usb sync.. patience it s must here)
8. WMDC will run on startup automatically.
hope this will help..
and the bad part is Samsung did not make any driver/software for Windows 7
My i8000 works without a hitch on my Win7 system (x64 and x86). Check if your device's USB option is set to ActiveSyn or USB Mass Storage.
ishtangli said:
My i8000 works without a hitch on my Win7 system (x64 and x86). Check if your device's USB option is set to ActiveSyn or USB Mass Storage.
Click to expand...
Click to collapse
the same here, works without any issues on x86/x64.
help with omnai 2 i8000
hi friends..
i bought an omnia 2 i8000 8gb 2 weeks back..i bought it from india..
i want to know weather i can upgrade my winmo 6.1 professional to winmo 6.5..
the shop told free upgrade is possible..but not available in india till now..
so i want to know is there a way to upgrade it from internet..
pda--I8000DDII3
CSC--I8000NUII3
these are the details in version..can anyone get me a solution..
i read from internet that i could go to samsung site of a country and upgrade it from that site if my phone was manufactured in that country..im not sure if thats right..
pls tell me from which place my phone was made..
and also is it possible for me to upgrade to winmo 6.5 from samsung site...
PHONE--I8000XXII4
Just to share ... Spent abt 6hrs figuring out why my omnia 2 would always hang when i needed to set it up for partnership in order to sync in WMDC (OS = Win7). Been searching wif different keywords in google and realised my problem is not common which convinces me that there is something funky with my set up that is preventing the sync.
Got lucky today ... did a wild google on "omnia 2 wmdc driver" ... and on 1 of the threads, discovered that it is important that the Windows in-built Windows Media Player had to be "installed", which i didnt do since i'd been using other media players. And voila ... issue resolved.
MS sucks! Especially when you get humiliated by such problems that seems so easily fixed. =D
enjoycool said:
I tried with 5 computers. Do I need more?
Click to expand...
Click to collapse
Try a 6th PC for good luck
I recived a HTC Legend from Italy [Fast Web], unlocked, but the problem is I can't access to the phone with the HTC sync, the phone is hardly recognized by the computers (tried win7 x64, win 7 x86 and for XP x86 not working at all) windows say "can't recognize usb device" but with some tutorial here in the forum windows reconized the device as Android phone and that all, HTC sync still don't work and either if I use the phone as a flash disk, windows can't access to the MicroSD card, but the card work well if I put it directly to the computer!
What this problem? what can I do? If i debrand the phone it will resolve the problem?
Help plz!!!
you are not in the correct section.... take a look in the part of the forum dedicated to the Legend and you will see answer to your problem....
I recived a HTC Legend from Italy [Fast Web], unlocked, but the problem is I can't access to the phone with the HTC sync, the phone is hardly recognized by the computers (tried win7 x64, win 7 x86 and for XP x86 not working at all) windows say "can't recognize usb device" but with some tutorial here in the forum windows reconized the device as Android phone and that all, HTC sync still don't work and either if I use the phone as a flash disk, windows can't access to the MicroSD card, but the card work well if I put it directly to the computer!
What this problem? what can I do? If i debrand the phone it will resolve the problem?
Help plz!!!
xedma said:
I recived a HTC Legend from Italy [Fast Web], unlocked, but the problem is I can't access to the phone with the HTC sync, the phone is hardly recognized by the computers (tried win7 x64, win 7 x86 and for XP x86 not working at all) windows say "can't recognize usb device" but with some tutorial here in the forum windows reconized the device as Android phone and that all, HTC sync still don't work and either if I use the phone as a flash disk, windows can't access to the MicroSD card, but the card work well if I put it directly to the computer!
What this problem? what can I do? If i debrand the phone it will resolve the problem?
Help plz!!!
Click to expand...
Click to collapse
HTC sync is also a bit bugy for me, but it usualy works if I first connect the phone, start the program and only after this I choose how it should connect to the computer.
However, it should always work as a flash drive (if you choose it) without any problems.
I think you should first make a hard reset and if it's still not working then take it back and get a new one.
download the latest version of HTC Sync and use it.
Thanks for your answer so quick! The HTC sync is updated for legend v2.0.33. but still the same problem, may be the USB is bricked?
Hi everybody,
I hope you can help me because I really can't find the solution:
When I connect my HD2 WP7-device to my computer it charges, but isn't recognized.
- Zune won't start automatically and won't find any device.
- Device Manager doesn't show any unknown device or something that could be my phone.
What I have tried so far:
- Used a XP3 and W7 x64 machine (also ones without any history with a WP7-phone)
- Used a lot of different cables
- Used a lot of different USB-ports
- reinstalled WP7
- reinstalled zune
- (de)installed activesync
- I'm not sure, but first I had a dual-boot solution with Android and I recall USB also didn't work there.
I started to think the USB-connection of my phone might be broken, but when I use MAGDLR, the USB works as mass storage and I can also use the USB flasher. The Bootloader also works, so I tried the following:
- (using bootloader) restored the HD2 in its original state with a official stock ROM and original (locked) HSPL
- Installed a Android ROM: the USB also does NOT work with WM6.5 or Android.
Does anyone know anything I can try now? And Yes, I have read all of the threads of other people with USB-issues and the MS-solutions, but none of them had the solution for me...
Coffee-donation for whoever has the golden tip
Hello guys, I don't mean to hijack the thread, but I am facing a similar issue.
I installed the LEO70 ROM on my HD2 when it first came out, and forgot all about it. I now want to install the NoDo (7932) update to test it out (and maybe move permanently to an Android ROM eventually when I decide I don't like it). I am facing an issue; I want to upgrade my MagLDR to 1.13 (from 1.12) and ROMUpdateUtility doesn't recognize my phone, giving me the 'Error 260 - Connection' error.
I did remove Windows Mobile Device Center a month or two ago... could this be the problem? I have the latest Zune software installed on my Windows Server 2008 R2 SP1 (x86-64) machine, and when I plug in the phone, Zune automatically starts and recognizes my phone, telling me there's a phone update available (from February that I need to install to enable future updates). I know it will kill my phone, so I won't install it. Also, USBMassStorage mode works nicely.
Any ideas?
Hi sclip,
I don't mind if you try to find an answer to your problem too, but it seems like a different one, because mine does work in bootloader/magdlr-mode.
BTW. I just installed the stock WM6.5 Rom of HTC, and USB still doesn't work! Can it be the radio of hardSPL or is it just broken?
****, after installing the stock WM6.5, it won't install another Radio/MAGDLR using bootloader, it stucks at the 0%.
I think I might haved destroyed my HD2
Daanmannetje said:
****, after installing the stock WM6.5, it won't install another Radio/MAGDLR using bootloader, it stucks at the 0%.
I think I might haved destroyed my HD2
Click to expand...
Click to collapse
remember to HSPL it once you have installed your original Stock rom
dazza9075 said:
remember to HSPL it once you have installed your original Stock rom
Click to expand...
Click to collapse
That did the trick, thanks. To bad it didn't help my USB problem...
since youve tried just about everything else try this
try using USBDVIEW and delete all the USB drivers
also install it on a different PC that hasnt had WP7 connected to it before
to continue with fault testing will requirer us to rule out the PC or the phone, at the mo it could be anything.
since you have Windows 7 install the XP virtual machine and use that, i believe the VM now supports pass through on USB so it should work, i have an old IrDA adaptor that wont install on my w7 PC but it will on the XP VM
dazza9075 said:
since youve tried just about everything else try this
try using USBDVIEW and delete all the USB drivers
also install it on a different PC that hasnt had WP7 connected to it before
to continue with fault testing will requirer us to rule out the PC or the phone, at the mo it could be anything.
since you have Windows 7 install the XP virtual machine and use that, i believe the VM now supports pass through on USB so it should work, i have an old IrDA adaptor that wont install on my w7 PC but it will on the XP VM
Click to expand...
Click to collapse
Thanks for the USBDVIEW-tip, quite a nice piece of software! However it didn't help me with my problem. Using a computer which never had WP7 connected before didn't help either...
Hey There!
Hope i'm i the right section to post my problem.
I got a HTC HD2 and flashed Windows Phone 7 on it -> This Rom: http://forum.xda-developers.com/showthread.php?t=1356833
I installed Zune and wanted to connect my device to sync it, but it isnt recognized.. All drivers are installed (Windows Phone Usb, HTC HD2 and so on.) Theres no Error in Device Manager.
When i connect my Device to the USB-Port, Zune starts but it doesnt recognize my HD2. I tried it 1000 times.. installed WMDC, reinstalled Zune, added local service, installed the drivers while beeing in bootloader-menu and so on.
Is there a chance to get my HD2 connected with Zune? I'm using Windows 7 Pro 64bit. But even on WinXp the same probs. Tried 3 cables also)
Thanks in advance,
Andreas
//pls help ;\
x64 windows sometimes make problems... try uninstall Windows Mobile Device Center and install it again but if this not help only way is to use x86 windows...