Better battery life - Touch2 General

Plz. Tricks and mods for a longer lasting battery charge.

There is a few power managment options in "AdvacedConfigTool"(search forum for it) , but I haven't tested it yet.

There are many threads on this topic already........
But generally speaking use advanced configurations tools, diamond tweak and/or SK Tools to change your settings.....

thanks to you for reply

And here some extra reading.........http://winmo.techparaiso.com/3-batt...your-windows-phone-network-backlight-general/

Today I've activated power options from "diamond tweak" - they are same as these in AdvancedConfigTool . Now I'm testing and will tell you in few days if there is an advantage ....

Which options in AdvacedConfigTool are for Power-Saving?

L.J.Silver said:
Which options in AdvacedConfigTool are for Power-Saving?
Click to expand...
Click to collapse
Look under "power management".......

Okay.... the question was a bit stupid ;-)....
But, which options are to be recommended without that the system is affected...to become slow or something like that?

L.J.Silver said:
Okay.... the question was a bit stupid ;-)....
But, which options are to be recommended without that the system is affected...to become slow or something like that?
Click to expand...
Click to collapse
Well there is no such thing as stupid just "less" experienced and "senior".......and what for you is too slow is good enough for somebody else....
Go to advanced conf tools section performance and choose the advised options per selection......you hardly can go wrong there.
But remember that low energy means less performance and the other way round....

Okay, thx.... i will try it

L.J.Silver said:
Okay, thx.... i will try it
Click to expand...
Click to collapse
Let us know the result......

Hey, just a minor info. guess u might already knew but try to set ur phone to "ring" only and change to "vibrate" when u are outside or in a big crowd. It shows a big diff. to my mega as it start the second day with battery still 100% when i changed to ring only. Just try to get loud ringtone. Vibrate just when u are in a club or sumthing.

Related

Simple (not PhoneAlarm) program to switch between Silent (Vibrate) and Normal

I am wondering if there is a simple program that I can use where if my Tilt is on battery it will switch to Vibrate, and on power, Normal.
I don't want the overhead of PhoneAlarm and was hoping for something much simpler (and smaller)
Does such a thing exist?
Thank you!
lcohen999 said:
I am wondering if there is a simple program that I can use where if my Tilt is on battery it will switch to Vibrate, and on power, Normal.
I don't want the overhead of PhoneAlarm and was hoping for something much simpler (and smaller)
Does such a thing exist?
Thank you!
Click to expand...
Click to collapse
search for vibraswitch. bind it to hardware key and you are ready to go.
i'll might post it later when i get home
marcelvanblankers said:
search for vibraswitch. bind it to hardware key and you are ready to go.
i'll might post it later when i get home
Click to expand...
Click to collapse
Thank You
I am curently using Vibraswitch.
I am hoping to find a program that can changed based on battery vs aC
Thanks Againq
I like these wonderfull SmartTools
Borsti99 said:
I like these wonderfull SmartTools
Click to expand...
Click to collapse
I did not see anything in SmartTools that accomplishes this (on their website...)?
If you don't mind a pay app, check out SBSH Phoneweaver.
www.sbsh.net
Vibrate on/off switch
with Vibra Switch
google it.
Nadavi
lcohen999 said:
I am wondering if there is a simple program that I can use where if my Tilt is on battery it will switch to Vibrate, and on power, Normal. I don't want the overhead of PhoneAlarm and was hoping for something much simpler (and smaller)
Does such a thing exist?
Thank you!
Click to expand...
Click to collapse
Uh, have you looked into VibraSwitch yet? I think you need a few more people to tell you about a utility that doesn't suit your needs... eventually you'll accept that it was EXACTLY what you needed all along.
But if not, then look into these applications. They all claim to allow automatic profile switching based on power source (battery or charger). Enjoy!
Spb Phone Suite
JGUI Phone Profiles
PocketMax PhoneAlarm
Borsti99 said:
I like these wonderfull SmartTools
Click to expand...
Click to collapse
Well, it isn't the perfect solution, but those smarttools mapped to a button is pretty handy - and you can't beat the size!
hotmail said:
Uh, have you looked into VibraSwitch yet? I think you need a few more people to tell you about a utility that doesn't suit your needs... eventually you'll accept that it was EXACTLY what you needed all along.
But if not, then look into these applications. They all claim to allow automatic profile switching based on power source (battery or charger). Enjoy!
Spb Phone Suite
JGUI Phone Profiles
PocketMax PhoneAlarm
Click to expand...
Click to collapse
I appreciate the response, but if you look above I have mentioned that I did not want phone alarm and I am using Vibra Switch.
However, I have not run into any documentation which states that Vibra will automatically switch based on power/battery.
If it is there then great! I have just not seen it...
lcohen999 said:
I appreciate the response, but if you look above I have mentioned that I did not want phone alarm and I am using Vibra Switch.
However, I have not run into any documentation which states that Vibra will automatically switch based on power/battery.
If it is there then great! I have just not seen it...
Click to expand...
Click to collapse
Yeah, I read that... I was being sarcastic. You are correct, VibraSwitch by itself will not do what you are looking for. Very few utilities will do what you want - automatically change profile based on power state. Many will do it automatically based on time, but not power.
So if you can't tolerate the extra memory consumption of the applications I listed, you'll need to search VERY high and low to find an alternative. I've looked extensively in the past and haven't found any others. Advanced Google search is your friend - you may get lucky.
If you turn up anything promising feel free to post it.
or...I just posted in the Vibra (Switch) forum post asking him to add it on as a feature
One other thing you can look into is Mortscript. It can poll battery level or power state and perform a function, or call another application... such as [gasp] VibraSwitch. It's not quite as simple as what you're looking for, but it can be made to work. Not sure if it will meet your minimal memory usage expectations either. It would be running in the background "watching" the power state. But it might be worth looking at. There are also a some really good examples from experts in the Mortscript forum. Happy scripting!

3 Diamond Apps

After spending the summer learning c# and .netcf I got my hands on a Diamond and had to make some small apps.
They're very beta and pre-release versions, but please try 'em out and give me some feedback
VibraNotify
Senses when the phone lays idle and when it is on the move, if it has been stationary for some time and it gets picked up it vibrates if there's been any unattended activity (sms, appointments, missed calls).
Should probably add some gui components for sensitivity tweaking.
CallBlocker
Rejects all callers enlisted in the supplied text-file. Currently the text-file contains "all" telemarketing numbers in norway (from telefonterror.no).
Speedometer
Really simple GPS-utility showing the current speed in different units.
Nice work!
Downloading them now.. and gonna try 'em right away...
I was thingking about another thing that the VibraNotify could do (or as a different program)
Like a theft alarm.. If the phone has been idle for some time.. and it gets piked up.. you have to enter a code.. if you dont, a high alarm sound will start
(I'm not gonna take the cred for this, someone else spoke of it in this forum some time ago)
Thanks. I'm going to try it!
Nice! I`ll have a look. Would be nice if you could set some settings, like idle time on the Vibra thingy!
Nice ... thank you.
audiophil said:
VibraNotify
Senses when the phone lays idle and when it is on the move, if it has been stationary for some time and it gets picked up it vibrates if there's been any unattended activity (sms, appointments, missed calls).
Should probably add some gui components for sensitivity tweaking.
Click to expand...
Click to collapse
How long is some time?
Surur
ok.. I tested VibraNotify...
I'm gonna use it for sure
But I noticed that if i get a sms and move it, it vibrates...
but if I don't check the sms... and move it again later, it doesn't vibrate
I think it should vibrate until I have checked the sms?
It's little bit annoying to see these programs working in task manager... is it possible to hide them? I mean they will be working in background... Especially vibranotify...
plus is it possible to add numbers to list for callblocker? I could not do that... well it saves as .txt file when i try to modify and save the list...
Theft alarm could definitively work, how about a mp3 shouting "Put the mobile down with two fingers only!"? Hehe
Regarding the idle time, I think I used 10 seconds, if you don't hide the windows you can se it changing states. The number outputted is the square of the sum of the changes in the accelerometer values.
I will add some gui components and registry settings for this when I got time, would be more dynamic that hardcoded constants.
I'm not sure if I understood what you meant NisseDILLIGAF, doesn't it vibrate if you got unread sms'es when you pick the phone up from i.e. the table?
emre_aachen:
Just add the numbers to the textfile, seperate by a newline, save and reload the application. It caches the numbers, maybe a wrong design decision? Comments?
audiophil said:
Theft alarm could definitively work, how about a mp3 shouting "Put the mobile down with two fingers only!"? Hehe
Click to expand...
Click to collapse
Nice!
audiophil said:
I'm not sure if I understood what you meant NisseDILLIGAF, doesn't it vibrate if you got unread sms'es when you pick the phone up from i.e. the table?
Click to expand...
Click to collapse
No... What I mean is if I get a sms and I accidentally move the phone, It vibrates...
I haven't checked the sms (I don't know that I have a message)
When I pick the phone up ... there is no vibration... It only vibrates once..
It would be great if It would vibrate every time I move it untill I have read the sms...
Like the flashing center button... It continues to flash until I have cheked the sms or a missed call or whatever...
again.. Thanx for a great app .. It's gonna be a standard app for my phone
Ah, then I follow you. This could certainly be done! Maybe an option in the gui to enable/disable...
I certainly need to reinstall VS to continue developing
I'm keeping this topic in view, sounds like a nice app. But as read from the comments, it still needs a little bit of work (setting etc).
Nice work!
audiophil said:
After spending the summer learning c# and .netcf I got my hands on a Diamond and had to make some small apps.
They're very beta and pre-release versions, but please try 'em out and give me some feedback
Click to expand...
Click to collapse
As you seams to know what you are doing I'll give you my two cents for a simple apps:
You know that when the Diamond is in standby with black screen you can't see if you have signal or not.
It's possible to have the DPAD flash when the phone in standby mode have no signal ?
Maybe it can stop flashing when the signal came back.
Let mi say after 15 sec. with no signal it start blink with 5 sec delaied flash and after a customizable time the blink
become more quick to allert that you are not reachable for a long period...
It will be wery usefull to know that without touching it.
Let me know and thank you for your great work!
titipsx said:
As you seams to know what you are doing I'll give you my two cents for a simple apps:
You know that when the Diamond is in standby with black screen you can't see if you have signal or not.
It's possible to have the DPAD flash when the phone in standby mode have no signal?
It will be wery usefull to know that without touching it.
Let me know and thank you for your great work!
Click to expand...
Click to collapse
I'm afraid this is not possible, when the diamond is in standby (black screen) it's pretty much like if your computer is in standby mode, all running programs are paused. Checked into this when doing the vibranotifyer, since running it in standby was my original plan.
I certainly hope I'm wrong, maybe someone can correct me?
Hey,
just thought I'd write a quick note to thank you for your programs. Small and simple, its a dream.
Keep them small and simple.
What I'm really looking for is an application to replace my Garmin305 EDGE, and I hope that you continue to develop your GPS stuff to include some of the training and tracking features that the Garmin had.
I found this program:
http://forum.xda-developers.com/showthread.php?t=340667
Its called TrackMe, but its clearly not developed for the Diamond, as running it clips my battery time down to 1.5 hours.
What would be nice is to run each feature as an individual streamlined application, like your speedometer.
Anyways, thanks again.
And keep up the good work.
the callblocker doesn't work with the 1.93rom
smax76 said:
the callblocker doesn't work with the 1.93rom
Click to expand...
Click to collapse
More reports on this?
I got 1.93 myself, and I just tested it with success.
audiophil said:
I'm afraid this is not possible, when the diamond is in standby (black screen) it's pretty much like if your computer is in standby mode, all running programs are paused. Checked into this when doing the vibranotifyer, since running it in standby was my original plan.
I certainly hope I'm wrong, maybe someone can correct me?
Click to expand...
Click to collapse
Too bad, but maybe I was not clear in my request.
I mean that the phone is only with the screeo switched off, but it is still active.
For example when it is in this state the phone can ring on a call or on sms...
If I understand well you mean that an apps like S2U2 can't do anything if the screen is offf while you press the power button ?
Thank you for further explanations, I'm really curious on that...
titipsx said:
Too bad, but maybe I was not clear in my request.
I mean that the phone is only with the screeo switched off, but it is still active.
For example when it is in this state the phone can ring on a call or on sms...
If I understand well you mean that an apps like S2U2 can't do anything if the screen is offf while you press the power button ?
Thank you for further explanations, I'm really curious on that...
Click to expand...
Click to collapse
AFAIK the calling, sms'ing etc is handled on a lower layer than what is allowed for the programs, suppose the hardware raises events or something when this happens which wakes up the OS.
Can't seem to see that S2U2 does anything while the mobile is in standby mode?
I just noticed something... maybe I'm wrong..!?
But It feels like the battery is draining faster with the VibraNotify!?
Anyone else that noticed something like this?
Gonna test some more... I'll know more tomorrow...

[CONCEPT] SMS Counter

Hello Folks,
It’s been around a month since I’ve joined xda-developers and I have had a chance to get some of the best stuff for my HTC Touch Diamond from here. I think it’s time for me to return the favor and give back something to the community.
SMS Counter
For some time now I have been searching for a *FREE* application that basically can tell me how many SMSes I’ve sent. Thus, if I have a free message sending limit in my plan, I can know if I’ve exceeded it or not. Unfortunately, I could not find any. The only good application that I know currently doing this is the 'Efficasoft smartphone sms counter'. (Though, If there is such application and if I’ve missed it, someone please bring it to my attention)
And thus, I thought of making one!
Possible Features
I spent some thinking about it and I figured that I can add a few more features to make this application a bit more, well, feature rich. The next post lists the features that I have currently is my mind. Based on your suggestions/feedback, I will change the list.
Development Platform
I will be making this application in .Net Compact Framework v3.5 / C#. Thus, people wishing to use this app will need the Compact Framework installed on their devices.
Devices
At the moment I’m planning to make this only for the HTC Touch Diamond. Once the app is a success and if it has a good demand, I can plan on porting it to other devices as well.
Pricing
If everything goes as planned and if this application sees the light of the day, it will be available for everyone to download for FREE, ALWAYS!
So my fellow community members, please think about this and give me your valuable feedback. I want to know your suggestions, your ideas. Do we really need this app in the first place? Is there something better already available? If we need it, how can we make it acceptable to a wider range of audience? Do we add more features or do we just put the most basic features? Lot of questions and your answers are welcome.
Thank you!
[CONCEPT] SMS Counter - Possible Features
Below are the possible features that I am currently thinking of implementing:
Determine number of sent and received messages.
Filter options: Within a date range, to/from specific person, etc.
Trends: Whom I’m messaging most and who is messaging me the most.
Cost calculation based on plan but to be override-able for any given month.
Suggestions welcome!
there is hs++ wich, among many others, have option of counting sent and recived mesages
but i like your idea
to list of features i`d suggest to add
autoresponse (to contacts from adress book when i cannot answer or read message or recive call)
setting message to send at precise time
PowerSMS is one such software. But it is not a freeware.
www.trinketsoftware.com
of course i know PowerSMS
it also has a lot more cool features
but, as you mentioned, it`s not freeware
ja-marcin said:
of course i know PowerSMS
it also has a lot more cool features
but, as you mentioned, it`s not freeware
Click to expand...
Click to collapse
And it has it's own limitations too. For e.g. I would prefer a graphical chart when I'm seeing statistics, this is something which I would like to incorporate in my own app.
Yet, it seems the response for this is pretty much zero and people are not very keen to have this application.
I like the Idea of the statistics (with chart! ) sounds funny to know who gets the most sms from me (and to see who don't linke me and never or seldom sends me sms back )
I think the features are okay for now keep it as simple as possible
is it going to work in the background ? i mean consume memory and cpu power all time.
i am looking for a call time and sms counter, something simple that i can reset every month (maybe even with an option to reset automatically at a given date each month).
it was built in with my sony erricson T650 and maybe any other phone. but nothing simple at the diamond (havnt seen any sms counter built in).
tomoffel said:
I like the Idea of the statistics (with chart! ) sounds funny to know who gets the most sms from me (and to see who don't linke me and never or seldom sends me sms back )
I think the features are okay for now keep it as simple as possible
Click to expand...
Click to collapse
Thank you for your feedback tomoffel, I'll keep your suggestions in mind.
ice2k2 said:
is it going to work in the background ? i mean consume memory and cpu power all time.
i am looking for a call time and sms counter, something simple that i can reset every month (maybe even with an option to reset automatically at a given date each month).
it was built in with my sony erricson T650 and maybe any other phone. but nothing simple at the diamond (havnt seen any sms counter built in).
Click to expand...
Click to collapse
No, it's not going to work in the background, the user will have the option to manually update stats after he starts the program or they will be calculated automatically when the program starts; whichever the user prefers.
Yes, I can add the option of resetting the stats manually or on a date specified by user, nice suggestions ice2k2, thanks.
trivedivishal said:
Thank you for your feedback tomoffel, I'll keep your suggestions in mind.
Click to expand...
Click to collapse
Thank you too
trivedivishal said:
No, it's not going to work in the background, the user will have the option to manually update stats after he starts the program or they will be calculated automatically when the program starts; whichever the user prefers.
Yes, I can add the option of resetting the stats manually or on a date specified by user, nice suggestions ice2k2, thanks.
Click to expand...
Click to collapse
That sounds good, just calculate when the user is ready to use, not always in the background more free Ram on our Diamonds! The reset on a specified date is also a really nice idea, yes!
Whats about a "constant" statistic, that shows the statistic from begining, and we can seperate in to monthly? So we can see in wich month we texted the most? And we could use the overall stats to calculate an wich (week)day we send the most sms
tomoffel said:
Whats about a "constant" statistic, that shows the statistic from begining, and we can seperate in to monthly? So we can see in wich month we texted the most? And we could use the overall stats to calculate an wich (week)day we send the most sms
Click to expand...
Click to collapse
You mean maitaining the statistics cumulatively? I don't see how that's possible with the 'reset' option. When a users resets the data, all previous stats are lost and that's its exact purpose. Though, feell free to correct me if i'm wrong and explain what you want in detail, possibly with an example. Thanks,
trivedivishal said:
You mean maitaining the statistics cumulatively? I don't see how that's possible with the 'reset' option. When a users resets the data, all previous stats are lost and that's its exact purpose. Though, feell free to correct me if i'm wrong and explain what you want in detail, possibly with an example. Thanks,
Click to expand...
Click to collapse
Like in the car. you have a constant counter of your km/miles, and a "small" one for the time you go to refuel.
so lets say, I want to know how many sms I send since I load my prepaid card (but also a constant statistic )
small counter/reset function = time since reload the prepaid-card / refuel the car
background (full)statistic = overalltime statistic with monts/(week)day stats / km/miles since you bought the car
hope thats make my sugesstion clear
tomoffel said:
Like in the car. you have a constant counter of your km/miles, and a "small" one for the time you go to refuel.
so lets say, I want to know how many sms I send since I load my prepaid card (but also a constant statistic )
small counter/reset function = time since reload the prepaid-card / refuel the car
background (full)statistic = overalltime statistic with monts/(week)day stats / km/miles since you bought the car
hope thats make my sugesstion clear
Click to expand...
Click to collapse
Thanks for the analogy tomoffel, it's much clear now.
Yes, this feature will be available, though I'll have to work out the exact mechanics of it. Thanks for the suggestion!
sounds good
If I can help you, let me know, I have a hermes(qvga) wit 6.1(crc) running on it, with around 6000 sms (atm not active) and a Diamond(VGA) with 6.1(Gen.Y) and around 600 sms.
Thank you!
trivedivishal said:
Thanks for the analogy tomoffel, it's much clear now.
Yes, this feature will be available, though I'll have to work out the exact mechanics of it. Thanks for the suggestion!
Click to expand...
Click to collapse
I think its simple, just use two counters: one is "resetable" the other is not.
i guess it means double the data and double the reading/writing cycles but im sure there is a way to optimise it with simple procedure.
tomoffel said:
sounds good
If I can help you, let me know, I have a hermes(qvga) wit 6.1(crc) running on it, with around 6000 sms (atm not active) and a Diamond(VGA) with 6.1(Gen.Y) and around 600 sms.
Thank you!
Click to expand...
Click to collapse
Great, thanks tomoffel. I'll plan to start development on it by the first week of September and have a beta ready by the end of second week. I'll keep you posted.
ice2k2 said:
I think its simple, just use two counters: one is "resetable" the other is not.
i guess it means double the data and double the reading/writing cycles but im sure there is a way to optimise it with simple procedure.
Click to expand...
Click to collapse
Yes, I've got the idea. I'll have to find out a way to optimize it, which I will.
Thanks ice2k2!
Sounds good , really looking forward to this app
hi, any updates on the progress?
ja-marcin said:
there is hs++ wich, among many others, have option of counting sent and recived mesages
Click to expand...
Click to collapse
I love the ideas in this thread, but what is hs++? do you have a link?
thanks in advance
MG

General leo gripes !

right had this phone a few weeks now got most of the little niggles sorted with this forums help just a few others that bug me ....
1: there is a separate system and ringer volume ...but if you set one it changes the other!! they are not independent. this is a major bug for me because if i have my phone on vibrate while im at work, if i then want to listen to music at work i plug in my headphones and have to turn up the volume to listen to the music. but if i then take out my headphones the phone is now on loud. and if i forget and leave it on i get told off at work ! lol
2: the age old text reply problem. 200+ messages (and no i dont want to delete them) means a big wait to reply to a message ....stupid !
3: the lock screen slider is very odd, sometimes it will unlock with one slide and other times it will take a few goes...and if your showing off your new phone to someone it just looks crap because you cant even unlock it ! can the area of touch sensitivity around the lock button be increased in size to make it easier to unlock ???
anyway cheers Dom
1. The volumes can be set seperatley if you choose to, by default they are linked. To set them seperately you simply go to settings sounds and display, and set single volume to off!
2. You can use Microsoft MyPhone to archive your text messages, ie not deleted but not on your phone. I did this with 2000 messages that I dont really need to be stored on the phone.
3. No lock issues here, to increase the area would sort of defeat the whole point of the lock button
2: the age old text reply problem. 200+ messages (and no i dont want to delete them) means a big wait to reply to a message ....stupid !
Click to expand...
Click to collapse
Just disable HTC Messaging and the problem is gone.
I wonder why people are still complaining about this, the fix is as easy as it gets. Really nothing worth talking about.
1: wow how did i not see that ?!?! i've looked in the menu about a million times ! haha cheers
2: yeah i have used that too but some messages i like to have with me so i can read them back......sentimental old sod i am...
3: i guess if no one else is having trouble it must just be me ! lol
You can disable the lock screen, if you want, with the following Registry setting:
[HKCU\ControlPanel\Keybd] "DeviceLockWhenSuspend"=dword:0
right tried that and you still cant have the ringer on vibrate and the system on loud .... if you click vibrate on either it sets the other !!!!!!!!!
if you click vibrate on either it sets the other !!!!!!!!!
Click to expand...
Click to collapse
This is normal for Windows Mobile and has nothing to do with HTC.
I don't know if there's a workaround.
well i dont care if its htc or win mobile .... its annoying ! lol
If you use something more powerful like G-Profile you can set up profiles with, for example, your txt/calls set to vibrate only. (Dont change the ringer volume to vibrate, instead change the incoming call notification to vibrate only. You can of course do this in Settings, but its easier with profiles)
It seems G-Profile is no longer free, but I am sure there are free alternatives if you search around.
onisuk said:
well i dont care if its htc or win mobile .... its annoying ! lol
Click to expand...
Click to collapse
Not that I want to be rude, but other phones cannot even set different volumes for system/ringer. E.g. on the iPhone, you only get ONE volume and you can't do anything about it.
Actually, it's already a huge advantage of Windows Mobile that is has that feature.
And it's a huge advantage that there are programs like G-Profile that give you even more options.
maati said:
Not that I want to be rude, but other phones cannot even set different volumes for system/ringer. E.g. on the iPhone, you only get ONE volume and you can't do anything about it.
Actually, it's already a huge advantage of Windows Mobile that is has that feature.
And it's a huge advantage that there are programs like G-Profile that give you even more options.
Click to expand...
Click to collapse
yeah i know but this is the first non-nokia phone i've had in about 5 years so its all a learning curve for me ! on the nokias you had profiles too so i guess i'll try this g-profile thingy ! thanks again ....
maati said:
Just disable HTC Messaging and the problem is gone.
I wonder why people are still complaining about this, the fix is as easy as it gets. Really nothing worth talking about.
Click to expand...
Click to collapse
not sure if I'm correct here but I thought the messaging fix stopped mms working,
if wrong.sorry but I need to use both sms and mms

Got myh HD2 and here is my first question...

It is gorgeous and for the last 3 days all's I have done tweak/upgrade and generally have fun with all the possibilities.
One thing I am a bit disappointed with is the font display on the home screen in the quicklinks - the font is so small it just does not seem to display correctly...and some of the links I have added to the quicklinks seem a bit pixelated...
Is there anything I can do about this?
Thanks
Scott
Why would anyone want an iphone?????
UberScooter said:
Why would anyone want an iphone?????
Click to expand...
Click to collapse
i dont get it either but i guess they want phone that works out of the box and they dont want to spent time tweaking it(best part about windows mobile, cause u can make your phone look like exactly the way u want ) and maybe cause of appstore? dunno about that cause itunes are very bad imho... slow and doesnt let u do what u want...
well everybody likes somethin else...
Activating Cleartype fixes the pixelation in the fonts you referred to. To turn it on go to Settings>Menu>All Settings>System>Screen and select the Cleartype tab.
Excellent that has made such a difference - the small title text for each Quick Link is still a bit fussy - or it just maybe be me....
I love this phone!!!
Thanks
Scott
Just did a restart and found the text is now truely clear - so I revoke my fussy statement from before.
Scott

Categories

Resources