Simple (not PhoneAlarm) program to switch between Silent (Vibrate) and Normal - Windows Mobile Development and Hacking General

I am wondering if there is a simple program that I can use where if my Tilt is on battery it will switch to Vibrate, and on power, Normal.
I don't want the overhead of PhoneAlarm and was hoping for something much simpler (and smaller)
Does such a thing exist?
Thank you!

lcohen999 said:
I am wondering if there is a simple program that I can use where if my Tilt is on battery it will switch to Vibrate, and on power, Normal.
I don't want the overhead of PhoneAlarm and was hoping for something much simpler (and smaller)
Does such a thing exist?
Thank you!
Click to expand...
Click to collapse
search for vibraswitch. bind it to hardware key and you are ready to go.
i'll might post it later when i get home

marcelvanblankers said:
search for vibraswitch. bind it to hardware key and you are ready to go.
i'll might post it later when i get home
Click to expand...
Click to collapse
Thank You
I am curently using Vibraswitch.
I am hoping to find a program that can changed based on battery vs aC
Thanks Againq

I like these wonderfull SmartTools

Borsti99 said:
I like these wonderfull SmartTools
Click to expand...
Click to collapse
I did not see anything in SmartTools that accomplishes this (on their website...)?

If you don't mind a pay app, check out SBSH Phoneweaver.
www.sbsh.net

Vibrate on/off switch
with Vibra Switch
google it.
Nadavi

lcohen999 said:
I am wondering if there is a simple program that I can use where if my Tilt is on battery it will switch to Vibrate, and on power, Normal. I don't want the overhead of PhoneAlarm and was hoping for something much simpler (and smaller)
Does such a thing exist?
Thank you!
Click to expand...
Click to collapse
Uh, have you looked into VibraSwitch yet? I think you need a few more people to tell you about a utility that doesn't suit your needs... eventually you'll accept that it was EXACTLY what you needed all along.
But if not, then look into these applications. They all claim to allow automatic profile switching based on power source (battery or charger). Enjoy!
Spb Phone Suite
JGUI Phone Profiles
PocketMax PhoneAlarm

Borsti99 said:
I like these wonderfull SmartTools
Click to expand...
Click to collapse
Well, it isn't the perfect solution, but those smarttools mapped to a button is pretty handy - and you can't beat the size!

hotmail said:
Uh, have you looked into VibraSwitch yet? I think you need a few more people to tell you about a utility that doesn't suit your needs... eventually you'll accept that it was EXACTLY what you needed all along.
But if not, then look into these applications. They all claim to allow automatic profile switching based on power source (battery or charger). Enjoy!
Spb Phone Suite
JGUI Phone Profiles
PocketMax PhoneAlarm
Click to expand...
Click to collapse
I appreciate the response, but if you look above I have mentioned that I did not want phone alarm and I am using Vibra Switch.
However, I have not run into any documentation which states that Vibra will automatically switch based on power/battery.
If it is there then great! I have just not seen it...

lcohen999 said:
I appreciate the response, but if you look above I have mentioned that I did not want phone alarm and I am using Vibra Switch.
However, I have not run into any documentation which states that Vibra will automatically switch based on power/battery.
If it is there then great! I have just not seen it...
Click to expand...
Click to collapse
Yeah, I read that... I was being sarcastic. You are correct, VibraSwitch by itself will not do what you are looking for. Very few utilities will do what you want - automatically change profile based on power state. Many will do it automatically based on time, but not power.
So if you can't tolerate the extra memory consumption of the applications I listed, you'll need to search VERY high and low to find an alternative. I've looked extensively in the past and haven't found any others. Advanced Google search is your friend - you may get lucky.
If you turn up anything promising feel free to post it.

or...I just posted in the Vibra (Switch) forum post asking him to add it on as a feature

One other thing you can look into is Mortscript. It can poll battery level or power state and perform a function, or call another application... such as [gasp] VibraSwitch. It's not quite as simple as what you're looking for, but it can be made to work. Not sure if it will meet your minimal memory usage expectations either. It would be running in the background "watching" the power state. But it might be worth looking at. There are also a some really good examples from experts in the Mortscript forum. Happy scripting!

Related

Ring tone Profiles like nokia

Hello all,
Does anyone know if there is a program that allows you to set various ring profiles like on the nokia phones. This is a very useful and quick way of changing ring settings. :roll:
Hi,
I use phone alarm from pocketmax and have done for about 6 months. I think it works perfectly especially when getting on a flight.
www.pocketmax.net
Hope that helps,
M.
Or try PocketZenPhone, it's much easier that PocketAlarm.
Try PocketZenPhone, is the better!!
Have to say originally I tried - ok 6 months ago - PocketZenPhone and didn't like it. It hung alot and just didn't integrate well. Haven't tried the newer version.
Phone alarm though I like for the following reasons:
1. Allows MP3 SMS tones
2. Repeating alarms (like Motorola) to avoid missing alarms
3. Integration with WebIS mail
4. Integration into Today screen
5. Skins
6. GPRS settings
7. General notification settings
It seems to do what PocketZenPhone does and more. Just my opinion though
M. :lol:
Here you go!
Hi mates,
I have spent several days looking for a phone profiler (ala Nokia) as much simple as possible... no whistles and bells, no bloatware... just profiles.
I miserably failed!
So I decided to develop myself a software solution to accomplish this simple task.
I am so happy with it that I have decided to share it with you.
It is completely FREE. Take it as it is, of course!
I've been using it for several weeks now, and could not experience any failures. Nonetheless there could be bugs or malfunctionings I would be glad to fix if you let me know.
My "Phone Profiles" includes a control panel Applet to change your settings and a Today Item plugin to easily select or change the current profile.
Just select the today item, tap-n-hold (or hold the action button down) to display a popup menu with your profiles.
For all the CLaunch lovers, it also possible to activate a given profile from a command line using the following sintax:
ctlpnl.exe profiler.cpl, n, 1
where n is the profile number. Change 1 to 0 if you want just to edit the profile's settings.
This software has been tested on WM2003SE Phone Edition only.
That's all, I guess.
Enjoy.
M. Panzica (aka Silver Bullet)
UPDATED: Looks like it does not work properly if compiled with VS2005. Recompiled with eVC4. Please re-download. Sorry.
Pocket Zen Phone can be found at http://zendrui.free.fr/ :wink:
@TheBrit
Do you mean you didn't like mine ?
@slvrbllt - does your profiler work on WM5 - I have a universal and am interested to know if it works on that. I can't test it on it tho just now cuz it's away for repair
@NinjaDonkey:
Nope, buddy.
As far as I know it doesn't work (yet) on WM5, since I use API calls that require the code to be signed. I am currently working on a new version that is supposed to be running on WM5 as well... stay tuned.
NinjaDonkey said:
@slvrbllt - does your profiler work on WM5 - I have a universal and am interested to know if it works on that. I can't test it on it tho just now cuz it's away for repair
Click to expand...
Click to collapse
works on WM5 as well....just tested :wink:
slvrbllt said:
@TheBrit
Do you mean you didn't like mine ?
Click to expand...
Click to collapse
I'm sure yours is just fine.
I've been using PZP for a while now and it really does the trick. It not only profiles ring tones but lots of other settings too. 8)
...and here is the ITALIAN version many of you have requested.
Cheers.
hi! i'm a new magician user. may i ask how will I install your Profiler to my phone?
Try PocketZenPhone or PhoneAlarm
Those 2 should be the best in the market now
I just try both of them as of late
And I must say I choose PhoneAlarm better than PZP, PZP is a little slow and would hang once in a while
Plus PhoneAlarm got more feature like billing info, better skining...ext
@Silver Bullet: Could you post some screenshots please?
Greetings,
BGK
PZP has full instuctions here: http://zendrui.free.fr/
Re: Here you go!
slvrbllt said:
So I decided to develop myself a software solution to accomplish this simple task.
Click to expand...
Click to collapse
Hi,
I just downloaded and installed your little program on my Magician, and I am seriously impressed! The Today DLL is a mere 12k, and everything works flawlessly so far!
Great job - thanks a lot!
Would you allow me a few comments, in no particular order?
- your program needs a name.
- the GPRS problem that PZP has seems to not exist in your program - well done! I'm almost convinced to switch...
- this thread here is about the three existing profiles programs. Could we have a separate thread for your program?
- would you care to comment how you manage to switch on/off Bluetooth? I remember that for Zendrui this was not easy to implement. Does your program also handle Widcomm stacks?
- I would be interested in a German version, and if you send me a string table, I'd be more than happy to to provide German translations.
- one wish: I certainly do not want all of the settings PZP offers, but there are a few I do miss:
-- setting the volume for system sounds. There are situations where any sound is unacceptable, even the beeps when tapping.
-- set the backlight time-out. For example, when I navigate, I do not want the backlight to turn off at all.
-- backlight level independently for battery and charging mode.
Yes, I know that this already sounds like beginning featuritis. But afaik all these settings are simple registry entries, so should not bloat the code. Trying to put this into the UI may be a bit tricky. Well, just my personal wishes - feel free to ignore if you disagree.
Overall, I find it a really well-done little program. Thanks a lot again!
Cheers
Daniel
In my opinion the best is Profiler :lol: Very simple and friendly program.
In my opinion the best is Profiler :lol: Very simple and friendly program.

3 Diamond Apps

After spending the summer learning c# and .netcf I got my hands on a Diamond and had to make some small apps.
They're very beta and pre-release versions, but please try 'em out and give me some feedback
VibraNotify
Senses when the phone lays idle and when it is on the move, if it has been stationary for some time and it gets picked up it vibrates if there's been any unattended activity (sms, appointments, missed calls).
Should probably add some gui components for sensitivity tweaking.
CallBlocker
Rejects all callers enlisted in the supplied text-file. Currently the text-file contains "all" telemarketing numbers in norway (from telefonterror.no).
Speedometer
Really simple GPS-utility showing the current speed in different units.
Nice work!
Downloading them now.. and gonna try 'em right away...
I was thingking about another thing that the VibraNotify could do (or as a different program)
Like a theft alarm.. If the phone has been idle for some time.. and it gets piked up.. you have to enter a code.. if you dont, a high alarm sound will start
(I'm not gonna take the cred for this, someone else spoke of it in this forum some time ago)
Thanks. I'm going to try it!
Nice! I`ll have a look. Would be nice if you could set some settings, like idle time on the Vibra thingy!
Nice ... thank you.
audiophil said:
VibraNotify
Senses when the phone lays idle and when it is on the move, if it has been stationary for some time and it gets picked up it vibrates if there's been any unattended activity (sms, appointments, missed calls).
Should probably add some gui components for sensitivity tweaking.
Click to expand...
Click to collapse
How long is some time?
Surur
ok.. I tested VibraNotify...
I'm gonna use it for sure
But I noticed that if i get a sms and move it, it vibrates...
but if I don't check the sms... and move it again later, it doesn't vibrate
I think it should vibrate until I have checked the sms?
It's little bit annoying to see these programs working in task manager... is it possible to hide them? I mean they will be working in background... Especially vibranotify...
plus is it possible to add numbers to list for callblocker? I could not do that... well it saves as .txt file when i try to modify and save the list...
Theft alarm could definitively work, how about a mp3 shouting "Put the mobile down with two fingers only!"? Hehe
Regarding the idle time, I think I used 10 seconds, if you don't hide the windows you can se it changing states. The number outputted is the square of the sum of the changes in the accelerometer values.
I will add some gui components and registry settings for this when I got time, would be more dynamic that hardcoded constants.
I'm not sure if I understood what you meant NisseDILLIGAF, doesn't it vibrate if you got unread sms'es when you pick the phone up from i.e. the table?
emre_aachen:
Just add the numbers to the textfile, seperate by a newline, save and reload the application. It caches the numbers, maybe a wrong design decision? Comments?
audiophil said:
Theft alarm could definitively work, how about a mp3 shouting "Put the mobile down with two fingers only!"? Hehe
Click to expand...
Click to collapse
Nice!
audiophil said:
I'm not sure if I understood what you meant NisseDILLIGAF, doesn't it vibrate if you got unread sms'es when you pick the phone up from i.e. the table?
Click to expand...
Click to collapse
No... What I mean is if I get a sms and I accidentally move the phone, It vibrates...
I haven't checked the sms (I don't know that I have a message)
When I pick the phone up ... there is no vibration... It only vibrates once..
It would be great if It would vibrate every time I move it untill I have read the sms...
Like the flashing center button... It continues to flash until I have cheked the sms or a missed call or whatever...
again.. Thanx for a great app .. It's gonna be a standard app for my phone
Ah, then I follow you. This could certainly be done! Maybe an option in the gui to enable/disable...
I certainly need to reinstall VS to continue developing
I'm keeping this topic in view, sounds like a nice app. But as read from the comments, it still needs a little bit of work (setting etc).
Nice work!
audiophil said:
After spending the summer learning c# and .netcf I got my hands on a Diamond and had to make some small apps.
They're very beta and pre-release versions, but please try 'em out and give me some feedback
Click to expand...
Click to collapse
As you seams to know what you are doing I'll give you my two cents for a simple apps:
You know that when the Diamond is in standby with black screen you can't see if you have signal or not.
It's possible to have the DPAD flash when the phone in standby mode have no signal ?
Maybe it can stop flashing when the signal came back.
Let mi say after 15 sec. with no signal it start blink with 5 sec delaied flash and after a customizable time the blink
become more quick to allert that you are not reachable for a long period...
It will be wery usefull to know that without touching it.
Let me know and thank you for your great work!
titipsx said:
As you seams to know what you are doing I'll give you my two cents for a simple apps:
You know that when the Diamond is in standby with black screen you can't see if you have signal or not.
It's possible to have the DPAD flash when the phone in standby mode have no signal?
It will be wery usefull to know that without touching it.
Let me know and thank you for your great work!
Click to expand...
Click to collapse
I'm afraid this is not possible, when the diamond is in standby (black screen) it's pretty much like if your computer is in standby mode, all running programs are paused. Checked into this when doing the vibranotifyer, since running it in standby was my original plan.
I certainly hope I'm wrong, maybe someone can correct me?
Hey,
just thought I'd write a quick note to thank you for your programs. Small and simple, its a dream.
Keep them small and simple.
What I'm really looking for is an application to replace my Garmin305 EDGE, and I hope that you continue to develop your GPS stuff to include some of the training and tracking features that the Garmin had.
I found this program:
http://forum.xda-developers.com/showthread.php?t=340667
Its called TrackMe, but its clearly not developed for the Diamond, as running it clips my battery time down to 1.5 hours.
What would be nice is to run each feature as an individual streamlined application, like your speedometer.
Anyways, thanks again.
And keep up the good work.
the callblocker doesn't work with the 1.93rom
smax76 said:
the callblocker doesn't work with the 1.93rom
Click to expand...
Click to collapse
More reports on this?
I got 1.93 myself, and I just tested it with success.
audiophil said:
I'm afraid this is not possible, when the diamond is in standby (black screen) it's pretty much like if your computer is in standby mode, all running programs are paused. Checked into this when doing the vibranotifyer, since running it in standby was my original plan.
I certainly hope I'm wrong, maybe someone can correct me?
Click to expand...
Click to collapse
Too bad, but maybe I was not clear in my request.
I mean that the phone is only with the screeo switched off, but it is still active.
For example when it is in this state the phone can ring on a call or on sms...
If I understand well you mean that an apps like S2U2 can't do anything if the screen is offf while you press the power button ?
Thank you for further explanations, I'm really curious on that...
titipsx said:
Too bad, but maybe I was not clear in my request.
I mean that the phone is only with the screeo switched off, but it is still active.
For example when it is in this state the phone can ring on a call or on sms...
If I understand well you mean that an apps like S2U2 can't do anything if the screen is offf while you press the power button ?
Thank you for further explanations, I'm really curious on that...
Click to expand...
Click to collapse
AFAIK the calling, sms'ing etc is handled on a lower layer than what is allowed for the programs, suppose the hardware raises events or something when this happens which wakes up the OS.
Can't seem to see that S2U2 does anything while the mobile is in standby mode?
I just noticed something... maybe I'm wrong..!?
But It feels like the battery is draining faster with the VibraNotify!?
Anyone else that noticed something like this?
Gonna test some more... I'll know more tomorrow...

x1 profiles ?

what are you guys using for switching profiles ?
i'm looking for a basic profiles app along thelines of ppcprofiles or phoneweaver.
unfortunately, i cannot seem to get phoneweaver to work at all - changing profiles says that the notification has changed but it never does.
is anyone else having this problem or should i blame it all on tf3d ?
thanks in advance
I always use the SPB movile shell and want more profiles too!
you could use spb phone suite. it works but imho it takes up too much place on the today screen.
phenx said:
you could use spb phone suite. it works but imho it takes up too much place on the today screen.
Click to expand...
Click to collapse
i did try that and i agree - it's far too complex !
have decided upon a hard reset and retrying phoneweaver :-(
mrdo said:
what are you guys using for switching profiles ?
i'm looking for a basic profiles app along thelines of ppcprofiles or phoneweaver.
unfortunately, i cannot seem to get phoneweaver to work at all - changing profiles says that the notification has changed but it never does.
is anyone else having this problem or should i blame it all on tf3d ?
thanks in advance
Click to expand...
Click to collapse
Hi there all,
you could use the Touch HD\ HTC profile manager. It can be found under the Xperia Programs, Panels and tweaks section for the Xperia. I was also looking for the same thing a while back, and found that.
hope that helps!
winmowgster said:
Hi there all,
you could use the Touch HD\ HTC profile manager. It can be found under the Xperia Programs, Panels and tweaks section for the Xperia. I was also looking for the same thing a while back, and found that.
hope that helps!
Click to expand...
Click to collapse
Can you post a link please? I can't find it and neither can the search engine.
At the moment I use SPB Phone Suite and it integrates into the Mobile Shell panel, if you don't like it on your today screen.
Sorry, my mistake... first post! Link Contained.
Here is the link to the whole thread:
http://forum.xda-developers.com/showthread.php?t=441439
the section your after is under Touch HD utils its called volume control
Regards
Winmowgster
I dont think we are talking about the same thing? ... the volume control is just a new skin for setting the volume right? .. I think with profiles we mean like they are used in nokia phones where depending on your selected profile u ve a different ringtone, volume, message tone etc. ?
cause I d find something like this really useful .. at the moment I cant even figure out how to change the tone of when I receive a text message.
Looking at the Original Poster's request, I suggested a solution, which I thought fits the bill pretty well.
If you want to switch between silent, ring and vibrate then this does the job.
having read the request again, and googling the programs that mrdo tried, i see that i may have made a mistake. :S
The SPB Phone Suite is awesome! Well worth the dosh! Have as many profiles as you want plus automatic time or event based profile switching.
winmowgster said:
Looking at the Original Poster's request, I suggested a solution, which I thought fits the bill pretty well.
If you want to switch between silent, ring and vibrate then this does the job.
having read the request again, and googling the programs that mrdo tried, i see that i may have made a mistake. :S
Click to expand...
Click to collapse
thanks for your input. i do have the touchstone volume control installed and it's very handy but i am looking for something that will allow me to switch ringtones, alerts and volumes at the touch of a button.
after a hard reset and yet another reinstall of my apps, phoneweaver still doesn't work. grrr and double grrr.
mrdo, what is the problem specifically? Is there an error on the device or do you start the application but nothing of significance appears?
I briefly tried phoneweaver and had the latter problem. Couldnt figure out whether it was running or not.
In the end I ended up giving up and going for the Touch HD simple profile manager.
I don't find HTC profile manager in that thread, can u post the direct link?
winmowgster said:
mrdo, what is the problem specifically? Is there an error on the device or do you start the application but nothing of significance appears?
I briefly tried phoneweaver and had the latter problem. Couldnt figure out whether it was running or not.
In the end I ended up giving up and going for the Touch HD simple profile manager.
Click to expand...
Click to collapse
the application installs and seems to work properly but the alerts and ringtones don't actually change. not really sure what the issue is at this stage ...
nap007 said:
I don't find HTC profile manager in that thread, can u post the direct link?
Click to expand...
Click to collapse
it's just a larger volume control rather than a profile manager :
Blackstone Volumecontrol - WORKING ON EXPERIA
http://forum.xda-developers.com/showthread.php?t=442154
direct link :
http://forum.xda-developers.com/attachment.php?attachmentid=127106&d=1225749027

ShakeAndSave

Hope someone find it interesting
http://www.extreme-apps.com/ShakeAndSaveHome.php
Interesting orb, but have you or anyone actually tried it?
galaxys said:
Interesting orb, but have you or anyone actually tried it?
Click to expand...
Click to collapse
Just tried this and its surprising easy to use and does exactly what it says on the tin!!
Very handy if you want a quick screenshot!
EDIT
I have since noticed that when my phone automatically syncs every now and again ShakeandSave takes a screenshot, but I didn't shake phone. Possibly a few bugs with this software.
Once screenshot is taken you have option to exit program or continue using it. If you select to exit program, above bug obviously won't happen
It's nice to see imaginative new software but, personally, I struggle to see quite how useful this is.
There are other, more interesting ideas out there IMO - like Shoogle for example.
Thanks for the useful app. Can you make adjustment of location for screenshots storage? (For example, value in the register)
It is desirable to keep also other options in the register:
- Image Format
- Agree
- Unload after screenshot is taken
And command line parameter "start" - quick start, don't show the setting screen
vadim_bogaiskov said:
Thanks for the useful app. Can you make adjustment of location for screenshots storage?
Click to expand...
Click to collapse
I really like this apps. It is much better than the others which, on my Touch Pro, rely on a timer, which seems to always be too short or too long. Now, with your great app, I can just shake my TP when I am ready.
I would like to second the request to add a way to specify the location for the screenshot. Personally, I would rather have them stored on my storage card, than in my main device memory.
Step666 said:
It's nice to see imaginative new software but, personally, I struggle to see quite how useful this is.
There are other, more interesting ideas out there IMO - like Shoogle for example.
Click to expand...
Click to collapse
quite like that
the use of it for a battery indicator is very good

[REQ]Auto enable bluetooth on usb connect

On my Touch Pro I always used KixAss Bluepower, which is a small tool that activates bluetooth when the device is connected to a USB port. This would enable me to just put in the phone in the usb cradle in my car, switch on the radio and I'd have a connection immediately. As soon as I leave the car, thus disconnecting the phone from the cradle, bluetooth disables automatically.
Now the problem is, this tool doesn't seem to work on my HD2.. Does anyone know a similiar tool?
I use the same program on my TD2 and it works well. You can try two things instead:
G-profile or see the mortscript thread.
Bluepower is the best though. G-profile can be a bit buggy IMHO.
mitsi said:
I use the same program on my TD2 and it works well. You can try two things instead:
G-profile or see the mortscript thread.
Bluepower is the best though. G-profile can be a bit buggy IMHO.
Click to expand...
Click to collapse
Thanks for the reply. I am also really wondering why bluepower wont work on my HD2. I'll check out G-Profile, though I think it's a bit too "heavy" (as in; way too many options) for the goal im trying to get to here.
housert said:
Thanks for the reply. I am also really wondering why bluepower wont work on my HD2. I'll check out G-Profile, though I think it's a bit too "heavy" (as in; way too many options) for the goal im trying to get to here.
Click to expand...
Click to collapse
I agree about G-Profile being perhaps too heavy. I would try Mortscript if I were you. That is very light and would definitely do the trick. It would take less processing power/battery to run than even Bluepower too.
mitsi said:
I agree about G-Profile being perhaps too heavy. I would try Mortscript if I were you. That is very light and would definitely do the trick. It would take less processing power/battery to run than even Bluepower too.
Click to expand...
Click to collapse
For what I've understood from Mortscript it's basically a a scriptiong language, similar to .NET, correct? I am not that good with scripting, are there any examples I can take learnings from?
housert said:
For what I've understood from Mortscript it's basically a a scriptiong language, similar to .NET, correct? I am not that good with scripting, are there any examples I can take learnings from?
Click to expand...
Click to collapse
I am a bit of a beginner too, but if you google "bluetooth mortscript" or use the search function, this will give you some ideas.

Categories

Resources