Related
hi,
since yesterday, my niki doesn´t response to touchscreen tapping if the slider is opened. i hear a very quiet metallic clicking sound if i open it up... if i try tapping the touchscreen before this little click appears, the touch works... but with slider open completely, it doesn´t. i guess this is hardware specific. i´ve tried a hardreset now, but still doesnt work any advice?
EDIT: i didnt flash any other radio...
EDIT2: sometimes it does work.
Sounds like a ribbon cable has come loose to the touch screen - send it back if it is under warranty, if not, Mike Channon has collected links to the service manuals somewhere on here which should show you how to correctly take it apart, fix it and put it back together again
Cheers,
Smiffy
I had the same problem. In my device it was: cable that goes to touch screen contacted metal on back panel.
I've solve it by finding manual to take my niki apart (http://www.pdacenter.ru/razborka/razbor_htc_touch_dual/ - but it is in russian). I've done everything till 6 point. Then I put my v-card between this cable and metal. Now it's ok
I've got extra service on mine.
6 euro's a month.
handed in the phone today (same issue), and got given an new one! ;D
_Zorro_ said:
I had the same problem. In my device it was: cable that goes to touch screen contacted metal on back panel.
I've solve it by finding manual to take my niki apart (http://www.pdacenter.ru/razborka/razbor_htc_touch_dual/ - but it is in russian). I've done everything till 6 point. Then I put my v-card between this cable and metal. Now it's ok
Click to expand...
Click to collapse
You ROCK! I had this exact same problem happen on my NIKI100 after I put Tom's Niki Project ROM on & immediately blamed it but after flashin back to stock the problem still occured & I was really bummin! I found this thread, tore my NIKI apart to step 6 as you described & I could see the spots on the metal of the inside back of the back cover where the cable was rubbing along with the protective plastic worn off on the cable a little bit so I suspect it was touching the metal & shorting out causing the problem (heck I'm surprised it didn't do some real damage!) so I cut about a 1" length of electrical tape & taped it to the area of the metal that it was rubbing on (I didn't see any legit reason for anything to make contact to that area for a ground so I figured it was OK. I started at the edge & ended just before the gaps where you would be able to see the tape from the other side in the battery cavity) and VOILA! it fixed it! To me it looks like a nasty design flaw on HTC's part but not expecting a recall any time soon. I suspect this fix will out last the phone & hopefully this thread will help others. I am 1/2 tempted to tear apart my NEON to see if the same design exists or if they put a piece of tape in that area.
the_fish said:
hi,
since yesterday, my niki doesn´t response to touchscreen tapping if the slider is opened. i hear a very quiet metallic clicking sound if i open it up... if i try tapping the touchscreen before this little click appears, the touch works... but with slider open completely, it doesn´t. i guess this is hardware specific. i´ve tried a hardreset now, but still doesnt work any advice?
EDIT: i didnt flash any other radio...
EDIT2: sometimes it does work.
Click to expand...
Click to collapse
well i got the same problem as u have/had... But i also need to align my phone like ten times a day, because its always out of alignment... I think i got to get back to the phoneshop to fix(replace) my phone. I do have the touch dual for 6 months now.
PhoenixNLx said:
well i got the same problem as u have/had... But i also need to align my phone like ten times a day, because its always out of alignment... I think i got to get back to the phoneshop to fix(replace) my phone. I do have the touch dual for 6 months now.
Click to expand...
Click to collapse
Hm, same problem here. Thought first that it was an error of the ROM that I used..
Btw: isolated every contat that I could find (nearly ) but no result -> still my touchscreen doesn't work when my slide is open..
EDIT: has anyone PHOTO'S of their disassembly and isolation work? I the problem is different on my device 'cuz the cable hasn't worn off...
Ok,
Now I took my device apart to the last piece, took the display cable apart, taped it in completely and my touchscreen WORKS once again :-D.
Woot! Thumbs up for XDA-developers!
EDIT: Now my touchscreen doesn't work when slide's closed... Any suggestion?
kvstrien said:
Ok,
Now I took my device apart to the last piece, took the display cable apart, taped it in completely and my touchscreen WORKS once again :-D.
Woot! Thumbs up for XDA-developers!
EDIT: Now my touchscreen doesn't work when slide's closed... Any suggestion?
Click to expand...
Click to collapse
ive brought my dual to a vodafone shop and they have fixed my dual. Replaced a part and software update, got windows 6.1 now, legal and my screen is working like a champ!
I have had the same problem with my touch screen except mine stopped working completely, it didn't matter if it was slide out or not. I could get the phone replaced on warranty though.
Just posting so people know this isn't just isolated case.
mine slowly stopped working.. im gonna disassemble later and try this. im glad im not alone
edit: worked a treat. some insulation tape on the metal shielding worked great.
That did't work for me! Can it be something else or is it the flex cable for shure? I'm considering buying a new flex cable on ebay! Will that fix the problem with touchscreen dos'nt work when slide is open?
theres a 99% chance that its the flex cable.. did you check it for any damage? mine had tiny tiny little dots with wire exposed. barely noticable but it was enough. try taping the cable. i dont know. if not, i'd get a new cable for sure.
It's worth a try. I've just bought a new cable. Hopefully it will make my
Dual working again. Now I just have to wait a week for it.
The cable arrived today and my dual now works perfect. Now the question is which phone i'll use, my dual or my new Diamond.. =)
hey, where did you get yours from? and how much did it cost?
i have seen ebay, but they are over 30$US including shipping.
Cheers,
palitu
Klingan said:
The cable arrived today and my dual now works perfect. Now the question is which phone i'll use, my dual or my new Diamond.. =)
Click to expand...
Click to collapse
The warranty for my HD is gone and I would probably need to change the touch screen digitizer myself, found these on ebay for ~60€, but does anyone know how to change them? Again, any help would be appreciated!
Originally:
HTC Touch HD, it has been a wonderful phone until now. I have encountered a wierd problem with the touchscreen.
First the touchscreen stopped working completely, after awhile it suddenly started working, at first it recognized some bits and pieces but now it recognizes every touch as normal, except..
It is very inaccurate and the "sum of inaccurity" seems to change depending on where I push the screen, the screen alignment option in settings does not fix this.
I recorded two videos to show this problem better:
http://www.youtube.com/watch?v=Xd1vjiHr2QU
http://www.youtube.com/watch?v=TynTTFIQJv8
Any help would be appreciated on how to fix this!
looks broken id return under warrenty did it get any knocks / drops? do you have insurance?~
spzero said:
looks broken id return under warrenty did it get any knocks / drops? do you have insurance?~
Click to expand...
Click to collapse
I have handled it with great care so no big knocks or drops. Ill contact the store about the warranty. Just wondered if theres a way how to simply fix this.
Just noticed, the screen works normally sometimes for one touch, then it goes back to the inaccurate **** :/
Im now guessing that some cable could be loose or something like that?
Have u tried recalibrating the screen? I can't remember exactly where I found it, but its in programs or settings somewhere.
Viba said:
...the screen alignment option in settings does not fix this...
Click to expand...
Click to collapse
Yes I have..
Anyway I RMA'd it now. Hope I get a new one
I can tell you from previous experience, HTC does NOT warranty touch screens. You mentioned "a store", so I hope they help you, because HTC will not. >sigh<
Seems a little unfair if they don't seeing as the HD is purely touch screen!
SomethingWicked said:
I can tell you from previous experience, HTC does NOT warranty touch screens. You mentioned "a store", so I hope they help you, because HTC will not. >sigh<
Click to expand...
Click to collapse
Hmmh, well the store probably sends it to some service center here in Finland that fixes HTC phones.
Indeed sounds very stupid if the warranty doesnt cover the touchscreen.
Perhaps my HD suffered from something else than a broken touchscreen, eg. mainboard or a chip that controls the touch screen. Who knows I'm just hoping it "passes" the warranty :|
Well... Had Hard-SPL on my touch hd and duttys 1.7 rom, so the warranty is gone
Didn't know they were so picky about it, they said it would cost 605€ to repair the screen. So now I should probably start looking for a screen digitizer on ebay and some help on how to change it... Already downloaded the service manual, but there was nothing on how to change the digitizer, could anyone here show me some light to this? Thanks.
I have dismantle my HD to see if there's any way to change only the screen (it's broken)
There's no way, as far as I saw. You have to replace LCD, tourch screen and screen. It's one piece and there's no way easy way to open it without break it.
You can find all of them for about 200E.
drabisan said:
I have dismantle my HD to see if there's any way to change only the screen (it's broken)
There's no way, as far as I saw. You have to replace LCD, tourch screen and screen. It's one piece and there's no way easy way to open it without break it.
You can find all of them for about 200E.
Click to expand...
Click to collapse
So there's no way I could replace only this?
http://global.ebay.com/Original_Digitizer_Touch_Screen_For_HTC_Touch_HD/310124432320/item
Another sad story // hopefully with a good ending
I kinda have the same problem as Viba and others. Sorry for the looong post. But decided to describe in more details my experience up to now, and hope you can help as well.
All of a sudden, I started having problems with the touch screen of the Touch HD. I started noticing that whenever I touched the Touchflo buttons, the phone vibrated. Soon I came to realize the if I touched in some spot, the phone recognized that I was touching lower, to the point that it could not recognize touches in the taskbar, for instance.
The united has 2 or 3 months max. It had some falls before and I do not really know who (or which one) was the culprit.
Tried this as fix: re-alignment, hardresets, Official ROM upgrade. Then I started reading and understanding that the problem was probably the digitizer ("nice to meet you").
I live in Brazil and the Touch HD is not expected be released here any time soon. So the few HTC service centers do not know how to fix it and do not have parts for it. And also, I bought mine from an auction site by some user who bought it abroad, with no warranty whatsoever. I am left alone in this.
I was very frustrated and eager to get my device running again. So I started looking for a new digitizer and also the tools to open my phone. The digitizer (just the digitizer, not the LCD screen) I ordered from an ebay shop in Hong Kong on Monday and is expected to still arrive sometime in this century (IF Brazilian port authorities do not mess up). The tools arrived yesterday.
I downloaded the service manual and said to myself, let's see if the digitizer problem is maybe due to a loose flat cable. Got to work and carefully disassembled the device as per the service manual. (I have to say that, although I try to be carefull, I always scratch, bend or mess something up when I do jobs like these. So I was afraid of cracking some plastic or worse and actually did some.)
Up to where the service manual show, it went incredibly very well. But that's the problem. The service manual guides you to disassemble the unit up to the point where you are with the bezel, LCD and digitizer in one piece.
But hey! I saw zillions of internet shops selling the bezel (actually, the hole housing, but with no LCD), the digitizer or other parts separately! What is going on?
So I started trying to unmount the bezel, LCD and digitizer. Tried several things. It got really late. I was impactient. So I tried splitting the digitizer from the LCD, by inserting a hard plastic aluminium tip between the digitizer and the housing. A very thin plastic kind of tape came out (at lest part of it). So I tried doing it more. No success. And then I put a very thin screwdriver between then (just enough to get an ulgy bent it the plastic housing).
When I had played enough with that puzzle, I gave up and began mounting everything back. The good part is that I was able to get everything back and the phone is working. Well, except for the digitizer.
First thing I did was to kidnap the wife's Nokia E71 I bought her last month and she is not using yet (she couldn't learn to use yet; well, she hasn't even tried it), because I have to have mobile access to my emails.
And I really started now to consider other alternatives. Will some user like me EVER be able to change just the digitizer? Is it even possible? If it is, I would like to give it at least another shot.
But I am also afraid that it could be another part which is in failure. I just don't want to spend more $$$$ in this. It would be better to buy another phone (and maybe not a complete touchscreen - gosh, I miss my Tytn II). I so regret being a gadget freak and not waiting a release in my country.
Shoud I send my phone abroad for a service center repair? My sister lives in Dubai and she may be able to help.
Should I give up my unit and seel the used parts in ebay?
Hope to hear your suggestions. Thanks anyway.
Viba said:
Well... Had Hard-SPL on my touch hd and duttys 1.7 rom, so the warranty is gone
Didn't know they were so picky about it, they said it would cost 605€ to repair the screen. So now I should probably start looking for a screen digitizer on ebay and some help on how to change it... Already downloaded the service manual, but there was nothing on how to change the digitizer, could anyone here show me some light to this? Thanks.
Click to expand...
Click to collapse
before doing this what about removing hspl and reflashing back a stock rom
change shop and you might, and i say MIGHT, be lucky
much better than screwing up the machine
Rafael K said:
I kinda have the same problem as Viba and others. Sorry for the looong post. But decided to describe in more details my experience up to now, and hope you can help as well...
Click to expand...
Click to collapse
Nice to know I'm not alone with this problem
Sucks that the digitizer couldn't be removed separately, would help alot if someone knew how to do this, if even possible..
crashDebug said:
before doing this what about removing hspl and reflashing back a stock rom
change shop and you might, and i say MIGHT, be lucky
much better than screwing up the machine
Click to expand...
Click to collapse
I have already tried with 3 custom roms and 2 original SPL:s with two original roms.
The Finnish law allows me to get my HD replaced if I could prove that the custom rom didn't brake the digitizer. Already sent some emails to the local repairstation for HTC phones here in Finland, lets see...
I run a repair center (US). I have not gotten curious enough to take mine apart, but if someone has a dead one to experiment with, PM me.
Broken digitizer glass
I have the same problem with the digitizer glass being broken. I have had the back off the phone and stripped it back as far as I dare, but the service manual just doesn't tell you how to replace the digitizer and glass only. Checked out youtube where there are many videos with instructions on how to replace the screens and digitizers on lots of different phones as well as the iphone, just nothing on the Blackstone yet.
Any one else found a solution or decent instructions?
Today I disassembled my HD too, found a loose screen wire but nothing else. Even when I attached it properly the screen didn't work.
Has anyone found out how to change the digitizer?
some info
Hello,
I am also have HTC Touch HD, and I am also thinking about replacement of touch screen and housing because of scratches. Here instruction in Russian
http://www.pdacenter.ru/razborka/htc-touch-hd/
step 24 is not shown on the picture, but there is mentioned that in order to replace screen you should push it forward from back side of the screen; also mentioned that screen is fixed with double sided tape (probably it is fixed to the touch screen)
Also, did you try to use any polish to remove minor scratches on the touch screen? HTC Touch HS has resistive screen and probably may be polished (in contrast to capacitive touch screen that has some coating).
All the best
Also, about this problem see
http://forum.xda-developers.com/showthread.php?p=3911326
You guys should be smarter! If you want to warranty exchange it, flash the normal SPL again and flash a stock rom!
Greets all,
I know probably this is the wrong section but I thought I would get a quicker response to my dilema. I was testing out my rom on my Test HD2 phone (I have two of them) and this one has the infamous end key issue, and tested my patience, so I read that if you use a very small flathead screw driver and push a certain place, you can get it to unstick, being that I tried all my methods that usually worked, I decide to try, well, the screwdriver slipped under the button part between the end key and the back key and screwed up my screen where I have all funny colors all over. So I was wondering if any could tell me if this is a LCD problem or a digitizer problem. There is no running liquid on the screen. The screenshot below is exactly what my screen looks like, and I want to buy the replacement, but I dont want to buy the wrong part and waste money, so can someone please let me know what it is that I have to replace? Thanks!
AngelDeath said:
Greets all,
I know probably this is the wrong section but I thought I would get a quicker response to my dilema. I was testing out my rom on my Test HD2 phone (I have two of them) and this one has the infamous end key issue, and tested my patience, so I read that if you use a very small flathead screw driver and push a certain place, you can get it to unstick, being that I tried all my methods that usually worked, I decide to try, well, the screwdriver slipped under the button part between the end key and the back key and screwed up my screen where I have all funny colors all over. So I was wondering if any could tell me if this is a LCD problem or a digitizer problem. There is no running liquid on the screen. The screenshot below is exactly what my screen looks like, and I want to buy the replacement, but I dont want to buy the wrong part and waste money, so can someone please let me know what it is that I have to replace? Thanks!
Click to expand...
Click to collapse
Its definetly an LCD issue, anyways not a major issue, as long as you can dismantle the phone and clear up the area btw the LCD and Keypad, i guess it should be back to normal
When you say Clear up the area, mind clarifying what that means? I can dismantle the phone, at this point it would probably be cheaper then sending for repair especially that its most likely out of warranty anyway.
I'm pretty much under the impression I am going to need to buy a lcd/digitizer combo to fix this. Unless I dont have to, cause like I said there is no bleeding and the phone works fine (minus the touchscreen issue caused by the end key) I can navigate thru the phone using droid explorers Screencast.
well what i intened to say was that there could be particles of dust or debris that is causing the LCD ribbon to come out a little, Coz i had a similar issue with "Dead touchscreen workin hard press end key " , later when i dismantled the phone and put it back again my screen looked exactly like yours, all i had to do was open it again and fix the LCD flex to the Main board properly thats all.
on a side note:
Well the touchscreen issue eventualy died all together, and i now have a replaced LCD from HTC and the screen is dull
Hi,
I had a small accident today with my HD2 . It felt from my pocket to the hard floor. It was in the leater pouch, but it hit right on the corner, where is no coverage.
I picked the phone up and was happy at first (no display cracks), but not for long. When I tried to turn it of, grey screed showed.
The device seems to be working, I can turn it on/off with the HW button...but I cant see anything.
As I said, there are no cracks of the glass layer so the digitizer should be ok. I just don't know actually.
Can anybody help me?
matej.charvat said:
there are no cracks of the glass layer so the digitizer should be ok
Click to expand...
Click to collapse
unfortunately you cant make that assumption, i have a hd2 with a badly shattered glass, (same as you, dropped from about 3 feet landed on the corner, shattered all the way to the other end of the phone) yet the digitizer and LCD worked perfectly for at least 18 months before finally the digitizer died, LCD still works fine.
My point being that just cos one part of the three (glass, digitizer, LCD) seems ok tells you nothing about the other two parts.
My guess is either the screen itself died, the connection on the mainboard broke/became unseated, or even that its unrelated to the screen at all and is in fact something else that broke and shows itself as a non responsive screen.
Im not sure if this is possible given that you have no screen to work with, and i guess something would need to be installed on the phone to make it work, but how about some software that shows your screen on the PC? you may even be able to tell if touching it is working.
hi everyone, I decided to replace the cracked screen of my n4, I ordered one with housing (much easier), I thought it s goona be an easy task giving I did it like five times with no problems, but I noticed at the end the screen was working but yellowish horizontal stripes appeared in the background, and I couldn't get rid of them, I dismantled and I reassembled it with no success, I couldn't find any satisfying answer on line. please any help to get my phone back to normal will be appreciated.
dihcar said:
hi everyone, I decided to replace the cracked screen of my n4, I ordered one with housing (much easier), I thought it s goona be an easy task giving I did it like five times with no problems, but I noticed at the end the screen was working but yellowish horizontal stripes appeared in the background, and I couldn't get rid of them, I dismantled and I reassembled it with no success, I couldn't find any satisfying answer on line. please any help to get my phone back to normal will be appreciated.
Click to expand...
Click to collapse
Have you contacted your vendor about a replacement?
If your old LCD still works connect that back up and check if it has the same problem, if not you know it's a problem with the new part.
DrFredPhD said:
If your old LCD still works connect that back up and check if it has the same problem, if not you know it's a problem with the new part.
Click to expand...
Click to collapse
Old one if dead, that's why I replaced it.
A and my phone was bought from Craigslist, no guarantee.
Anyway it seems like static, because it starts very strong but fades away without disappearing completely. I hope it's not the part.
bad part
Sounds like a faulty part to me. If reseating the connectors didn't solve it I'd inquire about swapping that replacement part for another.
One question though. It has yellowish horizontal stripes.. are they blotchy or are they uniform top to bottom on the screen? There's a possibility something isn't seated properly or a screw too tight or some debris caught in between that would but pressure on the LCD and cause the discolouration.
Electrospaz said:
Sounds like a faulty part to me. If reseating the connectors didn't solve it I'd inquire about swapping that replacement part for another.
One question though. It has yellowish horizontal stripes.. are they blotchy or are they uniform top to bottom on the screen? There's a possibility something isn't seated properly or a screw too tight or some debris caught in between that would but pressure on the LCD and cause the discolouration.
Click to expand...
Click to collapse
i don't think it's the part, because when i installed the first time the screen worked fine no yellow lines, but i had to reopen it a second time for some reason (i forgot what) and when i reassembled it the lines appeared for first time. since then they stayed there despite opening it and reassembling it many times. now i found out i have a proximity sensor issue when screen goes black during calls and speaker is not working at all.
so that's it for i'm done with nexus 4, it's pretty and well designed but troubleshooting is a b**ch!