Database Users

BIG PROBLEM White screen

My screen has gone completely white.... I bought the phone online from an "authorized dealer" who won't reply to me now. I live in the US and O2 does not appear to have any US contact info... Am i screwed on this expensive phone i bought 6 months ago?
Anyone had experience with this?
S

stuart.myers said:
My screen has gone completely white.... I bought the phone online from an "authorized dealer" who won't reply to me now. I live in the US and O2 does not appear to have any US contact info... Am i screwed on this expensive phone i bought 6 months ago?
Anyone had experience with this?
S
Click to expand...
Click to collapse
I guess you already tried hard reset?.
Can you get to bootloader mode?.

Tried hard resets, and getting to bootloader mode, i think this is a malfunction with the actual device, I just need to find out how to get in touch with o2 support internationally, i was wondering if someone on here may have had this problem too.
Thanks.

white screen - connector loose?
I too have this problem - but if I twist the screen away from the keyboard I get the display back. I suspect there's a connector loose inside but haven't looked inside.
Anyone on the forum any experience of getting inside and reseating connectors?

xda operation
tophamn said:
I too have this problem - but if I twist the screen away from the keyboard I get the display back. I suspect there's a connector loose inside but haven't looked inside.
Anyone on the forum any experience of getting inside and reseating connectors?
Click to expand...
Click to collapse
Hello there,
I had to get inside my xda to replace the screen that one of my dear rug rats broke. it is quite easy to do, and you only need to get into the screen side of it to get at the conectors. spin the screen half way round and look at the bottom and you will see 6 small screws. take out the two furthest out and two in the middle nearest the screen side. if you take them all out the whole thing becomes hard to handle. the front cover should GENTLY leaver off, and the cables to it exposed. even if they look in place lift the catch holding them in place and take them out and wipe the contacts with a cloth. just be very carefull with the cable strips as they tear very easy. . any problems then PM me
TTFN
Jay

White Screen
Try www.gpsmidlands.co.uk they replaced my ribbon assembly the same day.

Xda Lcd Repair
Try http://www.pda-repairs.co.uk

Brilliant
thanks for this posting - worked perfectly once i had worked out that atually you need to remove the screws further away from the screen in the middle. but otherwise I have successfully resurected a brick into a working universal! thanks!
Sark

Need advice from a trinity hardware guru ....

hi everybody.
some weeks ago i bought a new casing for my trinity on ebay. as I had to open my trinity while on a long trip far away from home and htc tech support (the "hang up" button broke), i had already broken my guarantee. so i decided to change the casing myself. i managed to do that (it was not easy!!) and closed the casing and everything was alright, but some days later trinity started to have graphics issues. sometimes it hangs and the display gets kind of scrambled, when i reset it it posssibly doesn't show anything on the screen or it hangs during the boot, sometimes it helps simply shutting the device down and restarting, sometimes it helps pressing the left side of the casing (front and back casing elements) together.
what can that be? at the moment it works alright, but this is not ok for me. somebody with hardware know-how can tell me which part can be the "bad one" and what i can do to fix that? i don't want to pay the repair fee at htc tech partner, and i want to wait till the htc touch cruise is available to buy a new one!
thanks
christoph

ESD?
Sounds like you've br0k3d something.

jlebowski said:
hi everybody.
some weeks ago i bought a new casing for my trinity on ebay. as I had to open my trinity while on a long trip far away from home and htc tech support (the "hang up" button broke), i had already broken my guarantee. so i decided to change the casing myself. i managed to do that (it was not easy!!) and closed the casing and everything was alright, but some days later trinity started to have graphics issues. sometimes it hangs and the display gets kind of scrambled, when i reset it it posssibly doesn't show anything on the screen or it hangs during the boot, sometimes it helps simply shutting the device down and restarting, sometimes it helps pressing the left side of the casing (front and back casing elements) together.
what can that be? at the moment it works alright, but this is not ok for me. somebody with hardware know-how can tell me which part can be the "bad one" and what i can do to fix that? i don't want to pay the repair fee at htc tech partner, and i want to wait till the htc touch cruise is available to buy a new one!
thanks
christoph
Click to expand...
Click to collapse
Hi, I did similar thing...I assembled my trinity to change case to white. After the LCD did not work at all.
Of course service said, I broked garantee, and there is some problem with LCD cable plug.

what did the repair cost?
did you go to HTC? did they change the display plug?
it's a very subtle error in my case...

How To Disassemble HTC P3600
I also want to change my casing.
From what I hear ... this may be not such a good idea.
Hoever ... all I can help with is this disassemble manual for HTC P3600 (http://rapidshare.com/files/82751326/How_To_Disassemble_HTC_P3600__Trinity_.pdf.html).
Maybe disassembling, cleaning all the plugs and assembling it again can help (sounds stupid ... but who knows).

thanks ..
one of the problems with the casing i bought was that the metal counterparts of the screws were not(!) present in the new one. so i had to cut them out of the old one, heat them and press them into the new case. luckily, i had ordered two new casings (to change it again after some months when the grey/silver paint would have fell off till total aesthetic destruction - of this otherwise really slick phone - again), because trying to press that counterpart (don't know the word) without heating resulted in total damage
then I had hoped that not only the keypad, but also the electronics plate under the keypad (my "hang up" button still isn't perfect i have no "klicky" feel any more) would be included. no luck here.
so everybody please stay away from trying to change casings or any other hardware issue with your htc phones. i am opening my htc/qtek (before: s100, three units) phones for a longer time now and must say i will stop doing that and return to being a "normal" user. it all gets worse
thanks

I just remembered ... take a look at this site: http://cnn.cn/shop/p3600-trinity-c-277_278.html
All the stuff looks genuine ... maybe this casing will fit you better and there are spare touch screens also.
P.S. White casing DOES NOT peel.

jlebowski said:
did you go to HTC? did they change the display plug?
it's a very subtle error in my case...
Click to expand...
Click to collapse
I went to E-care, the HTC support in Hungary. I was lucky, the expert repaired it free, but in the future there is no garantee

Lucky you ... there is HTC support where you live

my LCD screen broke.
I have replaced my LCD screen because it was cracked, the new screen does not even power up. I can hear wm6 running in the background but the digitizer nor the screen seem to be responding at all. If use the old screen it seems to work fine.
Any ideas or comments on how to get this new screen working?
btw, I have a gen1 htc p3600.

osavioro said:
I just remembered ... take a look at this site: http://cnn.cn/shop/p3600-trinity-c-277_278.html
All the stuff looks genuine ... maybe this casing will fit you better and there are spare touch screens also.
P.S. White casing DOES NOT peel.
Click to expand...
Click to collapse
many thanks for the link! i just ordered the a new keypad electronics plate
jl

jlebowski said:
many thanks for the link! i just ordered the a new keypad electronics plate
jl
Click to expand...
Click to collapse
Always glad to help

Has anyone dismantled an X1?

Hi,
Just wondering if anyone has fully dismantled an X1 - and if so, do you know if there are water indicator stickers on the inside of the phone?
So far, I can see two on the outside (one on the battery itself and the other where the battery contacts are on the phone itself)
Thanks in advance!

some where on youtube there is a vid on dismanteling an Xperia

Chaosstorm said:
some where on youtube there is a vid on dismanteling an Xperia
Click to expand...
Click to collapse
I saw that, but it's hard to see the PCB clearly :\

kunz said:
Hi,
Just wondering if anyone has fully dismantled an X1
Thanks in advance!
Click to expand...
Click to collapse
Have a look here
http://www.phonewreck.com/wiki/index.php?title=Sony_Ericsson_XPERIA_X1

nik40 said:
Have a look here
http://www.phonewreck.com/wiki/index.php?title=Sony_Ericsson_XPERIA_X1
Click to expand...
Click to collapse
Thank you!
It doesn't appear to have any on the inside.. however I'm not sure if the 3 rectangular white things on http://www.phonewreck.com/wiki/images/thumb/a/a8/Xperia_x1_pcb_2.jpg/800px-Xperia_x1_pcb_2.jpg are teh same as the water indicators on the outside.

Yes Dismantled it.
Mine fell down. Touch stopped working and so did the finger scroll sensor. The touch worked in landscape but in portrait it wont work.
Opened it and found the connector slide cable (similar to ones in samsung slide phones) unplugged. Guess the shock of the fall made it stick out.
Anyways plugged it back in and whoa....Phone was as good as new.
For thoe whose touchscreen stop working, I suggest please first try the "BOAN" method. (Battery off all night). Insert the battery in the morning and the screen works miraculously.

yahya.hamid said:
Yes Dismantled it.
Mine fell down. Touch stopped working and so did the finger scroll sensor. The touch worked in landscape but in portrait it wont work.
Opened it and found the connector slide cable (similar to ones in samsung slide phones) unplugged. Guess the shock of the fall made it stick out.
Anyways plugged it back in and whoa....Phone was as good as new.
For thoe whose touchscreen stop working, I suggest please first try the "BOAN" method. (Battery off all night). Insert the battery in the morning and the screen works miraculously.
Click to expand...
Click to collapse
Or make a hard reset may i add...
Or full flash instead thats worked for me...

Hard Reset did not solve my probem though. I tried flashing to Generic R2a0010 as well. Did not work.
One more thing before i tried the BOAN methodm was inserting a visiting card between the screen and the casing especially the four corners to wipe out the dirt. beleive me, its the small particles that pile up and sometimes pressurize a particular point disrupting the touch mechanism. I got my X1i only 20 days back, and i stay home or office and believe me there was enough dirt residing in the corners. I was actually surprised why they had such a big gap between the screen and the casing.
Anyways, since i did the flash, I flashed mine with the latest R3A0010. All's well in my x1 except that custom ringtones are not loud enough.

X1 Ribbon cable - what happens and a fix I came up with!

Hi, I come on here quite a lot for information as it's an amazing resource! This time however, I'm attempting to give something back!
I experienced the "black screen on slide out" on Monday. Phone completely screwed. I've also had a few droppages and had it apart once before so there's no way warranty is gonna help!
I stripped it down and soon discovered what it is that actually fails on the ribbon. The coating had worn through due to rubbing on something during the slide out / in process. it had been playing up for a while, probably due to shorting out on the metal case, but now the tracks (aluminium?) had worn right down.....
In pic 1 i've circled the worn area. The shiny section is where i'd tried taping over it to prevent shorting, before i realised the tracks were gone.
Got an almost new one off ebay for 15 quid and, realising it was going to happen again, came up with a solution that, so far, looks like it will work....
A while back I bought some "anti rattle felt" for my car's dashboard - really thin and strong self adhesive felt to prevent squeaking joins between dash sections. I cut a piece of this and stuck it to the new ribbon. Once this stuff is on it's well stuck, by the way!
See pic 2 for the modded ribbon cable.
On reassembly everything is working just fine so far! Here's hoping that it lasts longer than 6 months this time!
Just need a new casing now as mine is decidedly second hand!
Hope this turns out to be of use to someone!

cool story bro

when i took apart my xperia to replace the housing this seemed like a really weak point in the device. glad to see someone who has had the problem has been able to fix it

Why does the screen go black?

Hi,
When the coating wears off the ribbon cable it exposes the tracks in it. when you slide the keyboard out the exposed tracks short out on the metal casing and the screen loses it's input signal.
thats whats happened on mine at least and i presume quite a few others?
HTH!

Update:
That's interesting: My phone was also losing signal with the keyboard out, and occasionally while closed up as well. It would just randomly drop to "no signal" for a few seconds.
It hasn't done it since replacing the ribbon cable.....could be coincidental of course.

I'm having the same problem
It just started a week ago and I got the phone in January off of ebay. I'm new to opening up the phone so could anyone help me find the correct tools or have a link to a site with pictured instructions?
I noticed that the sliding mechanism started to go loose about 4-5 months ago but didn't expect the screen not respond in landscape mode. I have yet to see the other symptoms you all are referring to. I would like to fix this before it get worse.

In mine case it went totaly black after one week of this problem... You have all the instruction on youtube, there is where i looked. For tools you can be inovative, but the exactly right ones come with housings from ebay, it is only 15EUR, and i bet you have some cracks so it wouldn't hurt replacing. That is what i did, along with ordering new sliding mechanizm, and new ribbon cable.
I am open for ideas to prevent my ribbon cable from being cut at it weakest point again.

I'm assuming my flex ribbon went bad yesterday, since sliding the keypad out causes my screen to shut off.
Already ordered a cable off ebay and will attempt to replace it myself :O

Replaced my flex ribbon cable with one I bought on eBay. The screen doesn't turn on at all now, which leads me to believe the cable I was sent is defective. Put the old one back in and it works okay, less landscape mode. ughhh what a pain.

great tips! my input is I bought a case off of ebay that was ~60$ and everything actually fit fine for me...so I wouldn't discount every seller but you do get what you pay for, the 15$ cases are probablly the ones that will give you problems

I working in a mobilephone repair center if anyone need help drop me a priv... i able to get 2nd hand or even brand new components

Replaced the flex ribbon cable -
I got my flex ribbon cable a few weeks ago and took it to my local repair shop. They replaced it but the LCD screen/optical joystick receives no power. The touchscreen and everything else on the phone works just fine now. I thought it was a defective item so it was exchanged with a new one.
Got the repair shop to replace it again and the outcome still remains the same as the first.
Theres no light coming from the screen nor the side illumination.
I just told the repair shop to just place the original back in for the mean time.
Before the repairs, there would be a flicker of white light and random illuminations. Now there's no lights at all except the power botton.
Could it be defective a batch that the seller was sending out? or the repair shop's mistake and is playing dumb so they do not have to admint fault?
Hopefully there's an easy fix to this problem.
-Also I did inspect the ribbon before and after the repair. looks new as the OEm
Can anybody help me out with this new problem after replacing the cable -

perhaps you should try a hard reset. Ive had problems in the past where the optical joystick and the illuminators did not work, and that worked for me.
On the other hand, the top illuminators are on the same piece of hardware as the flex cable that was replaced, so a faulty flex cable is possible. The bottom illuminators are on the circuit board that the optical joystick attaches to, separate but connected to the flex cable.
Ive recently replaced my flex cable and touchscreen. The experience i had with the faulty touch screen was that it appeared to receive no power, but was in fact displaying a dark backlit illumination that could only be seen in the dark. At the same time however, the screen did not display anything. I'm not sure if this is similar to your experience, but if so then your touchscreen would need to be replaced.
ive done all repairs on the xperia myself, and one thing ive discovered is if something doesnt work right after a repair, simply disassembling it and reassembling it to make sure all the connections are properly done has worked for me in the past.
"Before the repairs, there would be a flicker of white light and random illuminations. Now there's no lights at all except the power button."
Now when you say the power button, do you mean that a red light appears under it?
I dont know if i can come to a conclusion or that i can help (or have helped) you come to a conclusion, but i can only assure you that the xperia acts out in strange and weird ways.
Good Luck!

Tags
Dismantle / Disassemble Sony Ericson Xperia X1
http://www.ifixit.com/Teardown/Sony-Ericsson-XPERIA-X1/788/1
http://www.formymobile.co.uk/xperiadisassembly.php
http://www.youtube.com/watch?v=AWDurQrRt-Y (REAR)
http://www.youtube.com/watch?v=iyGUbxFqvyc&feature=related (FRONT)
http://www.youtube.com/watch?v=elgC8hwHfYQ&feature=related
For info.
Mike

Thanks for the links. I've tried the hardreset and restoring the original rom but the issue is still there. It's really bugging me that everything works but the LCD screen. I'm currently using MyMobiler to use my phone. The touch screen works fine and so does the soft keys. Just no power for the lights. I might just give up and wait for another phone that catches my eye and then tinker with the xperia myself. but if anyone got a solution or want me to test something then I'll give it a try.
My warranty is no longer affective so I'll use my phone as a tester to help others with any problems.

TRIONDAVE, how's your Xperia running now with the cable mod that you did? Its been 6 months since you created the thread. I hope you're still around.
My Xperia X1 works nearly fine, except for the keyboard issues, so I'm thinking of opening it up. If your Ribbon mod helped I might just do it too once I've got it opened. Mine has a MOUNTain of cracks though, and the battery compartment itself is cracked on both side enough to make the compartment CURVED. Hence the Battery cover doesn't sit well.
I'm looking around for broken Xperias which I might be able to use to change the internal cracked casing. Lets see.

DatDereX1 said:
cool story bro
Click to expand...
Click to collapse
My thoughts exactly.

Hello guys, I am in need of real help over here!
Its just that Ive replaced my ribbon cable, the old one got screwd up.
However I got done for 10 minutes ago, tried to start up the phone.. without success :,(
The ribbon cable doesnt have anything to do with the start up, only the screen am I correct? Cause I cannot even start my phone..
Ive connected the charger, but when I remove the battery it shows a red light, meaning no battery, correct?
So what may the problem be exactly? Maybe the battery is all dead, or?
PLEASE HELP!

for the people with ribbon failures how long have you had the phone before it occurred ? im just interested on the cables lifespan.
mine is fine so far but i have noticed the slider is flimsy and rocks left and right.

FIX for HTC HD2 touch screen not responding

After reading several posts to find a cure for my HTC HD2 unresponsive touch screen,( Slider wont slide to open applications), I decided to verify a theory. Software... Digitalizer screen, or power button.
Ok, first I Instelled about six different android versions, and the screen slide still failed. I reverted the cell back to original t-mobile windows software, and still locked screen.
Conclussion: The sofware is not the problem.
After several attempts pressing the red power button, I got the slider to open. Briefly, it locked again. Pressed the red button hard and tried to work the slide on the touch screen. Again briefly worked. After several more attempts I got it to slide and while the phone was awake, everything worked perfect. I played games, oppened applications, texted, made phone calls, and the touch screen worked flawless.
Conclussion: The digitalizer (Thin top glass screen on top of the display that responds to touch) is not the problem.
This led me to belibe that the power button was at fault. I called T-mobile and after explaining the problem, they decided to send me a different type of windows cell. I want my htc. So I declined the offer and decided to void the warranty and take matters in my own hands. Yes, I opened my HTC HD2. This is what I found: After about an hour I had carefully taken my htc apart without braking or scratching the phone or screen. When I finaly got to the buttons on the bottom, I noticed how cheap they where made. A thin copper circle on top of two contacts held in place by tape. Yes you heard right, tape. After a while, beating on the red end key for maybe a year or two, the tape brakes and the metal piece slides to the side, and makes the button to malfunction, that's why the hard pressing to make it work. I tried A bottle of comppressed power air to clean them before disassembling the phone but the way they are installed It's not possible to clean them like that.
Conclussion: The red end key is faulty.
I decided to keep the cell alive so I went on e-bay and ordered the buttons, and just in case I also got a new digitalizer for testing purpose.
The buttons panel was about 4 dollars and some change, and the digitalizer (touch screen) was about 14 dollars for a total of less than 20 bucks. (Worth it)
So here are some pics of my cell buttons, and what it should look like. After I get the parts and assemble it I will conclude and let you know the final and official veredict. As of now, it all leads to the button.

Please do let us know how you got on. I have a HD2 which I'd like to get up and running again so I can play with custom roms and leave my other mobile alone...lol. Any chance you could link to the places you got parts/tape from, and what tools we would need?
Cheers! :good:

Did it worked ??? i am also in the same situation...please share the details,

bijeeshvs said:
Did it worked ??? i am also in the same situation...please share the details,
Click to expand...
Click to collapse
+1

listening in as well

sheesh! my wife's HD2 also stop responding yesterday, seems like clockwork that a lot are having the same problem
first have to find "how to open your HD2" w/o breaking anything in the process :silly:

Damn. The second time I'm hearing about the red button giving problems.... Will be waiting results from you dude!!! +1

still wayting for the parts
Well, I am still wayting for the parts, they are on the way. The parts I found on E-bay. The buttons panel was about five or 6 dollars, I also got the digitalizer which was about 15 dollars. As soon as I get the parts, I will assemble my hd2 with the original digytalizer (the thin top screen) and test to make sure the buttons were the problem. If all goes well, I will post a complete test result with links to how to get the parts, a link on how to dissassemble the hd2 and all info I can to help on this issue. I did a step back in life, and pulled out my trusty 7 years old motorola razr v3 and stuck my sim card so i can talk and text 5 words in 7 minutes. No internet... I need my HD2... Well, I will report back as soon as I can. Thanks for the wait...

@dragonsuicida
will be waiting for your findings & ways to dis-assemble the HD2 :fingers-crossed:

You were lucky to find the buttons' panel for 4bucks. I just checked out Ebay india, and the panel is 40bucks!!! What a robbery!

Wow. Me too!
I have been running Win6.5 still on my HD2, and have found in the last few days, my screen locks and I can't unlock it.
I came here deciding it was a software issue and was going to look into putting Android on my HD2.
I was slowly coming to the conclusion that it was the power button.
If I make an effort to NOT touch it - my phone seems happy.
It's amazing that we're all having the same problem about 2 and a bit years down the track since the HD2 was released - almost a built in expiry!!
And yeah - lots of details on how to fix it would be great.
The HD2 is too good-a-piece of hardware to allow a ****ty hardware button to be the cause of it's death.

New Keypad Button Flex Cable Ribbon For HTC HD2
Copy this:
New Keypad Button Flex Cable Ribbon For HTC HD2 T8585 and paste it on ebay, it will bring the buttons for the htc hd2. I belive they all come from china, but after I test them I will let you all know if they work and if they are worth it.
Copy this: REPLACEMENT DIGITIZER TOUCH SCREEN LENS for HTC HD2 T8585 and paste it on e-bay and it will bring you the digitizer for the hd2.
copy this: http://www.youtube.com/watch?v=YdOC3Xxo_k0 and paste it on your web browser, and it will lead you to a video on How To Replace Repair Disassemble Screen Digitizer. When it gets to a part that say that you have to put the phone in a oven, is just to melt the tape or glue holding the screen to the phone. I just used a hair dryer to war the screen enough to carefully remove the screen and the digitizer from the phone without breaking them, It works. I will be back soon with more info. I believe my digitizer screen is on the mail box now. Will report back...

I have same problem. Today I bought a flex cable ribbon and waiting for the dispatch (estimated in 2 days). I will also report back..

Same problem here!
Hope to hear soon that this is the way to go to fix it

You have to stick back the tape in the housing. The tape is electrically conductive. It connects the ground of the keyboard flex cable with the ground of the housing.
Copy this: REPLACEMENT DIGITIZER TOUCH SCREEN LENS for HTC HD2 T8585 and paste it on e-bay and it will bring you the digitizer for the hd2.
Click to expand...
Click to collapse
Be careful! There are two types of digitizer:
- Solder version http://www.parts4repair.com/htc-touch-hd2-touch-screen-with-digitizer-solder-version/
- Socket version http://www.parts4repair.com/htc-touch-hd2-touch-screen-with-digitizer-socket-version/

Be very careful when ordering parts, specially the digitizer they have several kinds, solder and socket, and different socket sizes. Compare parts with the ones in your cell to make sure, don't just believe the advertisements.

Hi, any updates on this? I'm also having this issue, but in my case, even pressing end call really really hard doesn't solve the problem... snif..

+1 on that
i pressed all the keys even the lower part of the LCD & flashed new roms but no joy :crying:
will bring to shop instead I'm afraid to open it up, it might end up even worse

Just be extremely careful when you try this. That flex cable is so incredible fragile and easy to tear. My roommate tore the volume rocker section right off of his HD2.

Hi dragonsuicida
Were you able to get your touchscreen to work?