I don't think there is a post about my issue. I apologize if I am wrong. (not good at searching in forums).
Anyway I've had my HD2 for about 6,7 months now and I have had no problems. But just recently I have noticed I am getting A LOT of missed calls. And sometimes they're very important to me.
So I decided to test it out and call myself. Now the call goes through but there is no ringtone. I looked in the settings and everything seems as it should be, I tried changing the ringtone too and a couple settings. The System volume and Ring volume are both at Max. I can recieve messages fine and there is a tone. It's just calls that are my main problem.
So I am not sure how to overcome this, please let me know.
Thanks in Advance.
Had this problem yesterday. even soft reset didnt help.
And then suddenly it started work again.
Related
well... so far i'm loving my tmobile mda after i've updated to the imate kjam rom (aku2) and of course readded some tmobile customizations and other tweaks..
anywho..
i noticed an alarming problem and wanted to see if others have had this problem or if its specific to my device and setup.
i tried calling a pal last night (he has a landline) and received a busy signal tone. After i hung up, i went back to watching my tv shows i have on a miniSD in Media Player 10 on my mda. The video played fine but the sound no longer played. Checked out TCPMP and same problem, no sound.
Then went into my system settings > Sound Notifications and again, no sound at all.
did a soft reset, sound is back. So i tried calling pal again to get the busy tones; got busy signal and again lost all sound.
So is this a WM5 bug or have i done something to mess up my busy signal tone? i have not done any sound related tweaks (before my last hard reset i did the microphone boost hacks but decided on not doing that this time around)
peace
I haven't had the busy=no sound but I have had the no sound after less than a day on standby--do a soft reset and it's back until who knows when--I have posted this issue but no one has responded yet in both this forum and another one--I have even googled the issue and still can't figure it out--This only started after I installed the latest ROM. Any one have an idea as to why this is happening? It's very annoying to have to reset my handset every day as well as not know when the sound will go out thus missing an important call. Much help would be VERY appreciated!!
BTW I have no 3rd part apps installed
I have the same problem
HELP !!!!!!
weard thing:
When I call to myself, (only to test the busytone) all sounds dropps after hung up. The only solution until now, to get it going are by a softreset,
BUT, if I do a call to another number after hung up, all sounds are back!!!
Without doing softreset!!!
So seamonkey420 could you try this and report?
I'm having a strange sound issue with my Wizard since late this afternoon.
Got called several times today, sound was working great en mic aswell. But around 4 I got called. The ringtone played as usual, but I couldn't hear the other line and there was no sound at all.
Did a softreset, but this did not help. Friend tried calling me, no luck.
So a hardreset followed, and again it did not help anything.
Now I don't hear any sounds coming from the build in speakers and my mic is not working aswell.
Tried several soft- and hardresets, tried removing the battery, checked every possible option in the phone... nothing.
Strange thing thou is that when i connect my headset, I do have sound and people do hear me. And the vibration is still working aswell.
Is it possible both my mic and build in speakers are defected? I still think it's a ROM issue since I'm using a custom T-Mobile 2.26 ROM.
...
Which brings me to problem number 2...
I lost alot of text messages the last time I upgraded my Wizard to a new ROM. How do I prefent this from happening again?
Is there a way to export of backup the messages? Or are there any program around that can do this?
cant solve your first problem, but have a suggestion for your 2nd problem... install this cab and sign up for this free service.. it will back up text, pics, contacts, voice notes, etc... its pretty cool
the site for it is http://1800message.com/ but you have to install the cab in order to sign up for the service
Hi everybody,
I have this one problem. After 2 days of usage, my Hermes suddenly went mute. No vibration or screen click can be heard even If I changed it to the loudest. I missed a lot of calls and sms due to this problem. The only way to solve this problem that I employ is by soft-reset my device.
I really hope somebody can help me tracking to root-cause of this problem and in the same time providing or proposing a solution to it.
Kindly help. Regards
morisa
Device: DoPoD 838Pro
did you unmute it from the speaker icon ?
if you have a backup restore it if not do a hard reset just make sure you backup your contacts/ stuff first
Phone goes mute
I think I'm having that problem too. Just out of the blue it happened. Didn't install anything extra the whole week. But when someone calls it rings, and if it's missed, it doens't play the miss call tone... or any other sound in that case.
darky said:
did you unmute it from the speaker icon ?
if you have a backup restore it if not do a hard reset just make sure you backup your contacts/ stuff first
Click to expand...
Click to collapse
Hi,
I noticed that the problem started to happen when I long-press the "Green" Button to activate the speakerphone during a call instead of pressing the "Speaker On" menu on the screen.
I've no idea why but maybe that could be the problem. Presently, I have to press that "Speaker On" on-screen menu to activate the speakerphone to avoid this problem.
Maybe other users can confirm this problem.
Regards,
morisa
mmorisa said:
Hi,
I noticed that the problem started to happen when I long-press the "Green" Button to activate the speakerphone during a call instead of pressing the "Speaker On" menu on the screen.
I've no idea why but maybe that could be the problem. Presently, I have to press that "Speaker On" on-screen menu to activate the speakerphone to avoid this problem.
Maybe other users can confirm this problem.
Regards,
morisa
Click to expand...
Click to collapse
Got the same issue here and I don't use speakerphone
my pda´s auto mute so
No sound although speaker icon no in mute
I have the same problem. Out of the blue no sound is heard at all. I tried changing volume but it did not do any thing. Had to shut down (not soft reset) and restart device and it works fine. This happen several times and I can figure out why it does this.
If anyone can help...
Tal
Same here, I'm using a X01HT Softbank variant TYTN flashed with the latest HTC WWE rom and after about like 12 hours of use the device goes mute for some reason, making calls it works perfectly but playing sounds or ringers the speaker does not work. Anyone have any ideas? I'm thinking of maybe re flashing the device since most of my information is on my storage card. I'll see if that fixes the problem :-\.
same problem here....
Same here. Only a reboot fixes it.
I have the same problem but it only happens when using the speaker phone. After the call ends, then there are no more system sounds etc. I then have to soft reset, which pisses me off as I use the speaker phone plenty in the car.
If i dont use the speakerphone, then there is no problem. Kind of strange....
Has anyone got any ideas on how to solve this?
I have same problem. I thought it was software related, but seems that it is caused by the speaker phone. I had the exact same problem with my old IPAQ 6515. It must be a software issue with WM although the 6515 had WM2003SE and the TYTN has WM5 so I do not know. Really annoying though as I use this phone for an alarm and it never goes off because the sound turns off sometime while I am sleeping - Uhggggg!
I also have the problem. Only a Softreset brings the speaker back to live.
my new problem...misery loves company
same here; curiously 2 pages into this thread and there are no real solutions.
I have solved the problem on my TyTN.
The Midlet Manager is the root cause for the Phone Mute issue on my device.
lol I just started getting this issue out of the blue after a couple of months and I didn't install anything :|
yeah nothing but a soft reset brings the sound back
Happens to me too. Strange coincidence - I've just checked my m3100 and it's giving me the silent treatment now. Time for another soft reset
I never use Midlets, so that rules the above theory out for me. However my battery was almost dead. I was using WiFi at the time, which turned itself off when the warning notifications popped up. Maybe when the battery drops below an acceptable level it turns the sound off to save power, but doesn't restore it after charging?
nope it happens to me even if my battery is fully charged
this used to happen on my i-mate PDA2k, and my JasJar (Universal) running both WM5, AKU3.2, 3.3, 3.5 and unfortunately even WM6 :S
Hi All,
After checking and testing the phone. I found out that the only way for me to solve the muting problem is by silencing the notification sound when a new email arrives. Since I have an unlimited EDGE/GPRS, my push mail is working around the clock. Thus, by not having the new email sound notify, the muting problem gone. This is caused by the notification event locking up the sound and not releasing it even after I read the mail. Previously the only way to resolve is by soft-reset but now, no more.
I have no idea whether this work or not for others but you might try and post your solution here.
Regards,
morisa
Hey
. I have an XDA2i. The problem that I am encountering, is to do with the ringer. When I recieve a call, the tone comes on, but it cuts out for a split second every 3 seconds (i've timed it, it's every 3 secs) which makes for a very broken up melody lol!
The onboard sound is working fine and all tones play fine in the sounds and settings window, and when txts come through it's fine too... seems to just be incoming telephone calls.
can anyone help me with this problem please??
...........IB a n e
Good vibrations...?
Hey Bane,
Do you have the ringer set to "Ring and Vibrate"? The vibration at times could interfere with the ring-tone, and would explain the 3 second thing. Another option is the tones sample rate, is this an mp3 ring-tone? I have noticed that the driver to play incoming call tones does not support high quality files, try down sample the tone and see if you can hear a difference.
--M
RE: Good vibrations
The phone is set to ring and vibrate, but I have tried it every which way... same problem. And I know that it isn't a result of the file, as it is a problem which has manifested within the past 2 weeks. I have been using the same tone for the past few MONTHS. Quite odd, the file incidently is a WAV file also.
I'm gonna try a hard reset when i get the itme. ( can't remembe how long the backup battery takes to deplete to give me a proper hard reset, but I'll give it a go)
Thank you very much for the tips mate, I had great hopes that the answer WOULD be one of the few you suggested, but no such luck
.......IB a n e
SORTED!
Hello there. For anyone reading this topic who had the same problem as me.... I eventually found the time to make a back up on my SD card and perform a hard reset, and this has sorted out the problem! weird though it was... a hard reset works
...........IB a n e
hey guys,
i was using my phone all day yesterday, receiving calls and sending texts without any problems but somewhere late in the evening, my phone stopped vibrating when there were incoming texts on normal (ring+vibrate) mode...i didnt change any settings...i soft-resetted my phone a couple of times but the problem still remains...
one more thing i like to add, the vibration works fine in vibration mode...it just doesnt seem to vibrate on vibrate+ring mode
anyone else facing/faced this problem? any suggestions as to what i should do? Thanks people
btw, this forum has helped make my leo f*cking amazing. Thank you to everyone
Try this...
http://forum.xda-developers.com/showthread.php?t=450256&highlight=TouchResponse
FileFixer said:
Try this...
http://forum.xda-developers.com/showthread.php?t=450256&highlight=TouchResponse
Click to expand...
Click to collapse
Thank you very much for your response...but i went to settings>menu button>all settings>sounds¬ifications>notifications tab>event>new message and found that vibrate was unchecked for some reason...i checked it, send a test msg and now its working again...
edit: i just noticed that when pressing the key volume, the vibration button isnt lit as usual...but it doesnt seem to disrupt the phone from vibrating.. ah well, im upgrading to rom 1.66 this weekend anyway