anyone else have this problem? busy signal = no sound - 8125, K-JAM, P4300, MDA Vario General

well... so far i'm loving my tmobile mda after i've updated to the imate kjam rom (aku2) and of course readded some tmobile customizations and other tweaks..
anywho..
i noticed an alarming problem and wanted to see if others have had this problem or if its specific to my device and setup.
i tried calling a pal last night (he has a landline) and received a busy signal tone. After i hung up, i went back to watching my tv shows i have on a miniSD in Media Player 10 on my mda. The video played fine but the sound no longer played. Checked out TCPMP and same problem, no sound.
Then went into my system settings > Sound Notifications and again, no sound at all.
did a soft reset, sound is back. So i tried calling pal again to get the busy tones; got busy signal and again lost all sound.
So is this a WM5 bug or have i done something to mess up my busy signal tone? i have not done any sound related tweaks (before my last hard reset i did the microphone boost hacks but decided on not doing that this time around)
peace

I haven't had the busy=no sound but I have had the no sound after less than a day on standby--do a soft reset and it's back until who knows when--I have posted this issue but no one has responded yet in both this forum and another one--I have even googled the issue and still can't figure it out--This only started after I installed the latest ROM. Any one have an idea as to why this is happening? It's very annoying to have to reset my handset every day as well as not know when the sound will go out thus missing an important call. Much help would be VERY appreciated!!
BTW I have no 3rd part apps installed

I have the same problem
HELP !!!!!!

weard thing:
When I call to myself, (only to test the busytone) all sounds dropps after hung up. The only solution until now, to get it going are by a softreset,
BUT, if I do a call to another number after hung up, all sounds are back!!!
Without doing softreset!!!
So seamonkey420 could you try this and report?

Related

No Alert Sound On Recieving An SMS

On recieving a text message no alert is sounded.
Worked last night, doesnt this morning. With clam shell shut it means you dont know if you have recieved a message and constantly need to manually check.
Checked all the settings regarding sound notifications and everything seems to be correct. All the correct tick boxes are ticked.
Tried changing to vibrate still nothing.
When changing the alert sound, pressing the play button, to hear what it is does nothing.
All sounds play ok in media player so no corrupt files.
When changing the ring tone in sound notifications the ring tone plays ok, it seems to be with all the other notifications.
I have done a search on this topic to no avail, others have had similar problems but all down to not having set the phone up correctly.
I have done a soft reset and a hard reset, both resolve nothing.
Corporate install on the hard reset.
I upgraded to the new radio 1.06 on friday and all seemed to be going well upto this morning. Havent seen anything related to this on the upgrade thread.
ROM 1.13.82
Radio 1.06.00
ExtRom 1.13.188
Phoned O2 they are sending a new phone out which is all well and good, but just out of curiosity I wondered if anyone else had come across this.
I vageuly remember having something similar, but it was when I was using some .wav's i'd gotten off the web. If I remember right, they played fine when hitting the Play button, but when an SMS came in, it either wouldn't play or just hang the XDA. If fixed it by converting the .wavs into 11khz stereo to match with the ones preinstalled by O2, and it all worked.
Don't know if thats related to your problem, but I assume you tried the regular .wavs and they didn't work either, so a new XDA was probably the best thing anyway
Funnily enough it was with a wav file that I have been consistantly using upto the other night when it stopped working, but like you said I tried with the other sounds but to no avail and no vibrating either.
But at least with a new machine I can raise the rubber screen stops before the marks start and also there wont be a dent on the outside where I accidently knocked it while in my pocket.
And hopefully the hinge may be tighter, and the keyboard may work properly, ( c and space keys need a bit more force ).
But apart from that the phone is great.

Sound / microphone issue & backing up Text messages

I'm having a strange sound issue with my Wizard since late this afternoon.
Got called several times today, sound was working great en mic aswell. But around 4 I got called. The ringtone played as usual, but I couldn't hear the other line and there was no sound at all.
Did a softreset, but this did not help. Friend tried calling me, no luck.
So a hardreset followed, and again it did not help anything.
Now I don't hear any sounds coming from the build in speakers and my mic is not working aswell.
Tried several soft- and hardresets, tried removing the battery, checked every possible option in the phone... nothing.
Strange thing thou is that when i connect my headset, I do have sound and people do hear me. And the vibration is still working aswell.
Is it possible both my mic and build in speakers are defected? I still think it's a ROM issue since I'm using a custom T-Mobile 2.26 ROM.
...
Which brings me to problem number 2...
I lost alot of text messages the last time I upgraded my Wizard to a new ROM. How do I prefent this from happening again?
Is there a way to export of backup the messages? Or are there any program around that can do this?
cant solve your first problem, but have a suggestion for your 2nd problem... install this cab and sign up for this free service.. it will back up text, pics, contacts, voice notes, etc... its pretty cool
the site for it is http://1800message.com/ but you have to install the cab in order to sign up for the service

Sounds stop working after a while

I recently put Black Majick on to my Hermes. From then it started exhibiting a strange problem.
Bascially no sounds are played. For example, there is no sound played on incoming calls, new sms or email messages, when dialing a number etc. I can use the phone as such (the speaker works during a call).
A Soft reset will get the sounds working again but after a while they stop. This is within a couple of hours. I'm yet to work out what is causing it.
I've tried rolling back to older versions of Black, including 3.01 which used to work just fine, but the problem persists.
I've hard reset and then not installed anything else. The only changes are to setup push email. But it still stuffs up after a while.
It's obviously not a hardware fault. If it is software I am at a loss as to what though as different firmware + hardresets should eliminate that. I've tried removing the SD card in case that was some how playing a role. The only thing I can think of is that there is something in EXTROM causing the issue? Doesn't make sense to me though.
Searching around the place has revealed that some people have similar issues but there doesn't seem to be a fix. I've started this new thread in the hope that someone that knows the answer will see it and assist.
Loud sounds have dropped away
Mine sounds like it might be hardware, as the phone only occasionally rings (when I test (ringer ) it just vibrates), I can hear phone calls. I'd like to know where to check software in case there's some switch that I've accidentally tweaked. I have dropped the phone once or twice but not clearly lost sounds immediately after.
It still plays A2DP Bluetooth stereo no problem (that's why I upgraded away from Orange's WM5)
=====================
SPV M3100
Schap's 4.31
Radio 1.38.00.01

HELP NEEDED!!! No Sound whatsoever

Hello,
i seriously need help.
Until this morning, my X1 worked. Over the last few days I was playing around a bit with various TF3D options, etc. I should note that I did not touch the ROM.
Then suddenly my phone gave no sound anymore.
No audible resonse to a stilus click on the screen.
No sound from FM radio.
No sound from phone (neither ring nor can I hear the caller).
(Vibra alarm works when activated though)
When switching to speakerphone I hear a very soft static crackle when doing the switch. Just as if the speaker is turned on. But then - no sound at all.
No microphone function on phone (caller cannot hear me).
No sound via headphones on phone.
No sound via headphones on MP3 playback.
Everything else appart from sound works. Even the phone can make a connection when calling - you just hear nothing.
I tried a soft reset. Nothing - still no sound.
Then I tried a hard reset:
Obviously the hardware of my speaker is ok. Because when I make a hard reset, there is the "pling" sound to inform me, that I should calibrate my screen.
Then there is another "pling" when the message appear, asking if I want to get the automatic provider settings updated.
But afterwards - no sound at all in the whole phone.
Then I went to update the ROM, thinking I might have (no idea how, but you never know) done something to audio drivers. I replaced my German T-Mobile ROM with the prepared German ROM without branding from this thread:
http://forum.xda-developers.com/showthread.php?t=446070
But still - same result as above.
Anyone got any idea?
Really nobody having any helpful comment?
did you try to change the radio??
I flashed a whole new ROM - same problem persists.
Besides: It´s not a Radio problem because system sounds and MP3 playback don't have any sound either.
Stating the obvious
Sorry to state the obvious but it sounds like the connection or the speaker module has gone. Have you recently tried the head phones on the X1? please see below link for a possible reason.
http://forum.xda-developers.com/showthread.php?t=282553
excersise your right to return
Regards,
Creamy-Goodness
Hello Creamy-Goodness,
thanks for you input.
If there was somewhere a hardware switch for sound output to speaker or headphones (which I doubt) that is stuck, it would not explain why I have neither sound in speaker NOR headphones. (One would assume that depending on the position of the switch at least one of the two should work.)
Apart from that I only tried the headphones to troubleshoot the problem after I found out there was no sound.
Nevertheless interesting, that this happens to other devices.
Speaker module cannot have gone either. There is an audible system sound from speaker right after hard reset to inform me that I need to calibrate the screen - but no sound anymore afterwards.
I will try to have the device swapped next week.
reg. sound issue
I'm suffering from the same problem here.
it only freggin vibrates.
TheMobilist said:
I flashed a whole new ROM - same problem persists.
Click to expand...
Click to collapse
Usually there is a simple fix which involves replacing a DLL, but not in this case of course - unless that ROM includes the bad DLL. I seem to remember it was a problem which occured after installing TF3D, but I couldn't find anything when searching just now.
It might be worth you checking the ear-speaker sound (make a phone call), as there is always the possibility that sound is being re-directed or intercepted (by something like Troca2). Check what programs and services are running.
Tests should be done with a known-to-work-fine-ROM of course.
Okay, I finally got the original ROM to flash the X1 back.
And strangely - when after one week of not using it I turned it on again to flash the phone, I got my sound back.
I have absolutely no idea what happened and why, but I am glad that I do not have to send it back.
@k_ash82
What I did is:
Turned my X1 off (not just stand-by), really off.
Waited one week.
Switched it on again.
I had my sound back.
No idea why, but maybe that works for you as well?
Just try it and please post your experience.
It would be very kind of you to share the german t-mobile stock rom with the community . Perhaps it could be added to "Xperia ROM and Guides" Thread, too.
I have no sound sometimes with this rom
http://forum.xda-developers.com/showthread.php?t=460190.
After switch off and turn on the phone again the sound is back.
Karsten
i have original sony rom (no branding) and also the same problems
no sound after a while (sometimes when phone goes in standby, sometimes just without a reason)
cannot play any sound in no application (media player,core player,etc) also the phone ringing or sms sound is off.
but the most annoying thing is, i can make a call, the call goes through, but I can hear nothing from the called person.
sometimes it works when i switch of the phone and restart, but sometimes I have to do 4 or 5 restarts.
the phone is now 1 week old, an I haven't installed Touch3D or anything like that, because I made hardreset and left the original configuration on factory settings, just to make sure, that it's no software error.
anyone got a solve for this problem actually?
if I ask google, there are many people with this problem, but no solve found till now
i have an issue with the speaker too but not exactly the same as the one described above.
my speaker still plays sound but it is about 10% of the original volume when it is already set to loudest (you have to put your ear right next to the speaker to hear the sound)
after i re-flashed the rom, it worked normally for about half a day until the problem returned
can anyone please help??
i keep missing my calls ><
thanks
this is a well known issue on some X1 phones ! you cant fix this with any software-update because it is hardware related. some x1 phones have it like every 2 weeks, others 3-4 times a day. most of the time you can just reset your phone but this is not a solution.
you have to send it back to SE in exchange for a new one.
i called my provider (o2) and they delivered a new x1 _on the next day_ in exchange (they have a 48 hrs delivery/pickup/return service).
the new phone works just fine !
- QuadWord

No Ringtone when I am called.

I don't think there is a post about my issue. I apologize if I am wrong. (not good at searching in forums).
Anyway I've had my HD2 for about 6,7 months now and I have had no problems. But just recently I have noticed I am getting A LOT of missed calls. And sometimes they're very important to me.
So I decided to test it out and call myself. Now the call goes through but there is no ringtone. I looked in the settings and everything seems as it should be, I tried changing the ringtone too and a couple settings. The System volume and Ring volume are both at Max. I can recieve messages fine and there is a tone. It's just calls that are my main problem.
So I am not sure how to overcome this, please let me know.
Thanks in Advance.
Had this problem yesterday. even soft reset didnt help.
And then suddenly it started work again.

Categories

Resources