When I connect my X10i to other PCs, it beeps and will show me the USB-connection-Manager on the phone (you know, USB Mass storage...).
when I connect the phone to my Win7 x64 PC, there is no beep on the phone nor will it shows the USB-link icon.
the entries in the device manager are the same: Attention Symbol, Other Devices, X10i
Any hints? Without this initial signal, I can't activate the Mass storage Mode...
thanks
Download PC Companion from SE website and setup. it will include a x64 win7 driver.
thanks a lot - it works!
i tried to download pc companion and it doesn't work for me... wuts my problem.. checked my ports with other usbs and it works fine... with my phone it says it does not recognize
Related
i cant seem to get my magician to connect to my pc ive tried active sync 3.7.1 and 4.0 but neither seem to work i plug the cable into my pc and it recognises it but tries to install something called generic RNDIS.
im running windows xp
any ideas?
thanks
Hello! I have win7 64 installed an I have been facing connection problems with various versions of Kies (the classic case where the phone says "connected" and kies still says (forever) "connecting".
Assuming that you usb drivers are ok then the probable solution could be the following:
DO NOT open Kies.
Connect SGS with USB to your PC and select kies connection.
Wait a few seconds (in order for the pc to recognise the SGS)
Then open Kies.
My discovery was made as follows:
I had opened the device manager in order to check whether my drivers were updated. When the phone was not connect there was no MTP connection / no SGS (normally it is under "Portable Devices Category". If. however, you connect the SGS as above, then this category (and SGS) will appear in the device manager. (You can see it appearing).
Now, if you open Kies first and then connect your SGS you will see that SGS appears in the device manager but had the usual error icon on it. Possibly having kies open interferes somehow with the drivers.
Hope this help, tell me if it worked...
Right click Kies taskbar icon and unclick "Auto start Kies"
Evans_Prophet said:
Hello! I have win7 64 installed an I have been facing connection problems with various versions of Kies (the classic case where the phone says "connected" and kies still says (forever) "connecting".
Assuming that you usb drivers are ok then the probable solution could be the following:
DO NOT open Kies.
Connect SGS with USB to your PC and select kies connection.
Wait a few seconds (in order for the pc to recognise the SGS)
Then open Kies.
My discovery was made as follows:
I had opened the device manager in order to check whether my drivers were updated. When the phone was not connect there was no MTP connection / no SGS (normally it is under "Portable Devices Category". If. however, you connect the SGS as above, then this category (and SGS) will appear in the device manager. (You can see it appearing).
Now, if you open Kies first and then connect your SGS you will see that SGS appears in the device manager but had the usual error icon on it. Possibly having kies open interferes somehow with the drivers.
Hope this help, tell me if it worked...
Click to expand...
Click to collapse
Nothing happen on my PC after plug my SGS, and of course Kies cannot detect my phone. I used Windows 7 x64. Test on 3 PCs (2 PCs used Windows 7 x64, 1 PC used Vista x86), same problem.
Don't expect the pc to do something (the device will only appears in "devices" under the control panel).
Make sure that KIes is off when you first connect your SGS and that "kies connection" is selected in the SGS (despite the fact that you have not launched Kies yet).
i.e.:
1. close kies
2. connect sgs to pc usb
3. select "kies" connection in SGS (make sure developer mode etc are off, ask on connection on)
4. Wait a few seconds
5. launch kies
6. ???
7. Connnect
I have Kies 2.0 on Win XP SP3 with all drivers and SGS with Froyo 2.2.1 XXJPU
I've tried everything mensioned above. Nothing works, Kies says Connecting... and no connecton is established. The device works ok as a mass storage device, though, but I need to sync contacts. Any ideas?
Thanks.
You could use google contacts to sync. Or export/import contacts as vcf file in contacts app(menu export/import).
Try also all usb ports, i find that some work better than others, possibly best should be the one you did the first installation on.
Sent from my GT-I9000 using Tapatalk
I cannot access my samsung intercept phone with 2.2 via my windows NEW 7 usb. I did so with the same device and cable on a previous pc running XP.
When connected, it beeps but the PC says there usb driver is wrong but I have tried all sorts oof usb drivers with no success.
Both samsung and HP (pc vendor) point their fingers at each other.
Any ideas?
Boruchb said:
I cannot access my samsung intercept phone with 2.2 via my windows NEW 7 usb. I did so with the same device and cable on a previous pc running XP.
When connected, it beeps but the PC says there usb driver is wrong but I have tried all sorts oof usb drivers with no success.
Both samsung and HP (pc vendor) point their fingers at each other.
Any ideas?
Click to expand...
Click to collapse
I used to have an intercept months ago and for a minute i had ur same problem. Try some of these options
1. Download samsung phone usb drivers.
2. Get a new usb cord.
3. Dwnload pdaNet from the market and send the drivers from ur phone to ur computer from pdaNet. ( pdaNet will ask if u need drivers) This is actually the way i got my intercept to be recognized by my win7 computer once i bought a new usb cord.
Hope things work out for ya
So I'm trying to connect my phone to transfer some files but I no longer get the USB method selection, the phone is only charging.
I also get a message from Windows after connecting via USB: "one if the USB devices attached to this computer has malfunctioned and Windows does not recognize it."
I tried re-installing LG united mobile driver but it didn't work. any suggestions?
bwe200 said:
So I'm trying to connect my phone to transfer some files but I no longer get the USB method selection, the phone is only charging.
I also get a message from Windows after connecting via USB: "one if the USB devices attached to this computer has malfunctioned and Windows does not recognize it."
I tried re-installing LG united mobile driver but it didn't work. any suggestions?
Click to expand...
Click to collapse
try a new cable
Hey guys. I have a problem with my SGY. Windows does not detect it, tried different cables, but no luck. Running Windows 8.1.
I have also tried it with a different PC, with Win XP, it works. I also ran Live Ubuntu, it also detects it, so it's a problem in Windows.
Tried reinstalling Kies, USB drivers, but it doesn't help, no yellow triangles in Device Manager.
Odin does detect the phone while it is in Download Mode, it is in COM3.
Does anyone know what to do here?
xddxd said:
Hey guys. I have a problem with my SGY. Windows does not detect it, tried different cables, but no luck. Running Windows 8.1.
I have also tried it with a different PC, with Win XP, it works. I also ran Live Ubuntu, it also detects it, so it's a problem in Windows.
Tried reinstalling Kies, USB drivers, but it doesn't help, no yellow triangles in Device Manager.
Odin does detect the phone while it is in Download Mode, it is in COM3.
Does anyone know what to do here?
Click to expand...
Click to collapse
Follow my instructions for how to get windows 8.1 to recognise your phone - links in my signature
Basically
Install Samsung USB drivers from my firmware thread
Remember in Windows 8.1 you have to run the setup in compatibility mode - right click the setup file - click properties - select compatibility tab - select run this programme in compatibility mode for - select windows xp sp3 - apply
Run the setup - it will now run & install
Plug your phone into the rear USB port (any if on laptop)
Now plug in any other USB device that you have already installed eg a USB mouse dongle
Windows 8.1 will now detect your phone
marcussmith2626 said:
Follow my instructions for how to get windows 8.1 to recognise your phone - links in my signature
Basically
Install Samsung USB drivers from my firmware thread
Remember in Windows 8.1 you have to run the setup in compatibility mode - right click the setup file - click properties - select compatibility tab - select run this programme in compatibility mode for - select windows xp sp3 - apply
Run the setup - it will now run & install
Plug your phone into the rear USB port (any if on laptop)
Now plug in any other USB device that you have already installed eg a USB mouse dongle
Windows 8.1 will now detect your phone
Click to expand...
Click to collapse
Thank you for your help, it worked!