I cannot access my samsung intercept phone with 2.2 via my windows NEW 7 usb. I did so with the same device and cable on a previous pc running XP.
When connected, it beeps but the PC says there usb driver is wrong but I have tried all sorts oof usb drivers with no success.
Both samsung and HP (pc vendor) point their fingers at each other.
Any ideas?
Boruchb said:
I cannot access my samsung intercept phone with 2.2 via my windows NEW 7 usb. I did so with the same device and cable on a previous pc running XP.
When connected, it beeps but the PC says there usb driver is wrong but I have tried all sorts oof usb drivers with no success.
Both samsung and HP (pc vendor) point their fingers at each other.
Any ideas?
Click to expand...
Click to collapse
I used to have an intercept months ago and for a minute i had ur same problem. Try some of these options
1. Download samsung phone usb drivers.
2. Get a new usb cord.
3. Dwnload pdaNet from the market and send the drivers from ur phone to ur computer from pdaNet. ( pdaNet will ask if u need drivers) This is actually the way i got my intercept to be recognized by my win7 computer once i bought a new usb cord.
Hope things work out for ya
Related
i have never had any problems with windows vista at all now that i have a new pc it just wont work i installed the 64x drivers on my 64x pc and all i get is installing device driver software. samsung android usb composite device ready to use. cdc abstract control model (acm) installing driver software. s3c6410 android adb installing software. usb mass storage device ready to use and android ums disk usb device ready to use. i waited for ever and its just stuck there i changed from one usb port to another some ports recognize it some did not. if it does it goes threw the same process of installing device driver software and some times give me a fail on cdc abstract controls model (acm) i also downloaded the 32 bit and no budge there. i restarted my pc and all also. i been at this for days just need some help searched the forum and the search results did not help thanks.
thanks guys 19 views and no responce
I'm not exactly sure what you are asking. I had problems getting my epic to show on my pc as well. For me, it wasn't the dr4ivers, but the fact I had it plugged into a usb hub. Try plugging it in a main usb port on the back of your case... these are usually the ones for your keyboard/mouse.
Sent from my SPH-D700 using XDA App
iv had the same issue my friend.... for all my pc epic modding I just use my girls xp netbook
dfitzpatrick said:
I'm not exactly sure what you are asking. I had problems getting my epic to show on my pc as well. For me, it wasn't the dr4ivers, but the fact I had it plugged into a usb hub. Try plugging it in a main usb port on the back of your case... these are usually the ones for your keyboard/mouse.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
I haven't been able to get drivers to load at all... I have given up.
I too have a 64bit Win7 machine.
I too had the same drama for days on end..
I too read that installing PDA net will get you up and running
so..
I too am suggesting the following:
get PDA net and when it installs, select "samsung" and enjoy being able to plug your phone into your computer
I hope this helps
When booting windows hold F8 key and choose "Disable driver signature",now boot into windows and intall drivers it should work.
If not intall PdaNet tether on ur epic download drivers to ur phone for ur pc(it promts u) install them and ur good to go,dont forget to disable driver signiture and if u on win64 bit than u gotta disable it each time u boot into windows.
My problem is little weird so i try to explain it as best as I can...
until today there was no problem to connect phone with USB but now when i connect the phone windows said "This device can peform faster this usb device can perform faster if you connect it to a Hi-speed USB 2.0 port. And another problem is when i turn phone into download mode start odin and connect the phone it said... usb device not recognized. I didnt flash any rom yet and i try different cables.
I am running on windows 7 ultimate 64-bit. I try two different PC and its look it the same problem.
But the weird part is that on third PC which has also win 7 ult 64-bit it works just fine.
So i try reinstall operation system but the same problem. The computer is max 3 years old so its has for sure usb 2.0
So i am little desperate because i am not sure if its problem with computers or with the phone.
Thank you for any advice!
I always had this problem with the i9100 actually, I blame crappy usb drivers.
Kies installed? Did you also try different usb ports? Chipset and USB Drivers of mainboard installed?
yes kies installed and also try back and front usb... but same result...
and usb drivers are installed manually by windows as far as i know... or?
Bladik said:
My problem is little weird so i try to explain it as best as I can...
until today there was no problem to connect phone with USB but now when i connect the phone windows said "This device can peform faster this usb device can perform faster if you connect it to a Hi-speed USB 2.0 port.
Standard Windows message for USB connections just means what it says .
And another problem is when i turn phone into download mode start odin and connect the phone it said... usb device not recognized.
Download mode how and whats on the phone in download window
Connection must be to a mainboard usb port .
If your PC has Kies make sure its not running make sure USB debugging is off on phone .
Power phone off restart start Kies connect phone does Kies see phone .
If yes turn Kies off remove cable connect phone in USB mass storage mode wait for windows to install drivers . Does PC see phone in Windows Explorer .
jje
Click to expand...
Click to collapse
yes windows explorer works
and kies also but still in usb 1.0 mode...
as I said I tried back usb and also front usb... same problem...
debugging is also off...
I try a little experiment... removed external grahics card and plug graphics on mainboard... and for a few seconds its works!
I try copy some video and speed was usb 2.0 but after few seconds its get error cannot copy bla bla and windows popup : this device can run faster and it change back to USB 1... weird...
and also i try again downloading mode but the same error... usb device not recognized...
Have you always used the same USB-port?
On some pc's, they only have one or two high speed ports and the other ones are "slow".
So yeah, try an other USB port on your pc
Sent from my GT-I9100 using XDA App
OP, I am confident it is a problem with your PC, and this XDA forum won't be able to help.
Try using another USB 2 device (like an MP3 player), see if you get the same message.
Use a different computers with the SGS2, see if you get the same message.
Bladik said:
yes windows explorer works
and kies also but still in usb 1.0 mode...
Thats your PC port USB 1
I try a little experiment... removed external grahics card and plug graphics on mainboard... and for a few seconds its works!
USB port not getting enough power .
Its PC not the phone explore sees phone and Kies sees phone = USB drivers ok
USB ports are not all usb 2 check your manual .
You can try factory reset on phone this will wipe all data .
jje
Click to expand...
Click to collapse
i tried all usb ports...
also i am using external hdd everyday i never had a problem
my mainboard is asus m3n78pro and there are usb 2.0 for sure...
how is possible to not get enogh power to usb when etc. like external disk just fork fine... ?
Bladik said:
i tried all usb ports...
also i am using external hdd everyday i never had a problem
my mainboard is asus m3n78pro and there are usb 2.0 for sure...
how is possible to not get enogh power to usb when etc. like external disk just fork fine... ?
Click to expand...
Click to collapse
Use a mainboard USB port they are USB 2 but it matters not a jot about 1 or 2 .
jje
Hi ,the problem is that when i connect the tab to the PC usb port(1.1 and 2.0),it does nothing.i have installed the mtp usb drivers and kies,sometimes the tablet is recognized under windows explorer as "portable device",but it's random and it's not predictable,it can be detected by windows 7 even after 30min or 1 hour.The tab is clockwork modded,actually i have flashed the latest stock rom honeycomb 3.2 build P7500XWKK4.I made a screenshot of the device manager when the tab was detected last time.I tried Debug USB enable/disable,doesn't work.Why this strange behaviour?
I also run x64 and do not experience any problems. You should try testing on a different computer to rule out any problems with the device.
I see,so i tried to connect the GT to my win7 notebook and also to my pc with a clean installation of win7 64 in a separate partition and still no luck.Meanwhile i'm using SwiFTP to transfer files to the device,hope to find a solution,maybe it's a broken/defective cable or 30pin usb port damaged
Yeah, seems like faulty usb port. Should send it back
Mine is Ok too, try to uninstall the Samsung Drivers, and Kies - if you have it installed - then reboot your computer all with the TAB disconnected from your PC.
try to perform a junk clean process for your PC.
Reinstall the Samsung Drivers, and TRY!
Win7 Pro x64 is my setup, working fine.
Don't quickly jump to the conclusion of "Defective USB Port" that's very Unlikely to occur on such pro equipment, me think!
solved
Guys I've changed the suspected faulty cable with a new one,now the TAB is recognised immediatly when plugged in,Odin works perfect now,it was hit'n'miss before.FINALLY!! now i can enjoy my teb(shame on you sammy)
Nice Bet that's a relieve
Yeah 2 weeks gettin' mad,i'm stressed now!i need some fun lol ,see you m8
So I'm trying to connect my phone to transfer some files but I no longer get the USB method selection, the phone is only charging.
I also get a message from Windows after connecting via USB: "one if the USB devices attached to this computer has malfunctioned and Windows does not recognize it."
I tried re-installing LG united mobile driver but it didn't work. any suggestions?
bwe200 said:
So I'm trying to connect my phone to transfer some files but I no longer get the USB method selection, the phone is only charging.
I also get a message from Windows after connecting via USB: "one if the USB devices attached to this computer has malfunctioned and Windows does not recognize it."
I tried re-installing LG united mobile driver but it didn't work. any suggestions?
Click to expand...
Click to collapse
try a new cable
Am trying to get my printer to recognise my phone as a usb flash drive. The printer recognises a usb device is connected but doesn't recognise the phone, as Samsung phones seem to need dedicated drivers.
Is there anyway to add files to root of phone so a section of its memory could be used as plug and play flash drive.
.
I have the same problem on my windows xp system. It recognises it as a MTP device but doesn't find any drivers for it.
Anyone got a solution ?
Think these are drivers https://www.dropbox.com/s/xlml5e62um56qmd/SAMSUNG_USB_Driver_for_Mobile_Phones.exe?dl=0 if not just install kies