hello ive searched everywhere is there an app or tweak for hd2 im annoyed that when on a call i keep pressing the on screen buttons is there anything i can do to stop this thanks..
The light sensor on the HD2 should turn the screen off automatically so that you don't press anything. That being said maybe you have a problem with your sensor so make sure it works, if it doesn't then try flashing another rom or call HTC.
Hope this helps.
master reset
rugersrob said:
hello ive searched everywhere is there an app or tweak for hd2 im annoyed that when on a call i keep pressing the on screen buttons is there anything i can do to stop this thanks..
Click to expand...
Click to collapse
you try a master reset befor you anything bigger in your phone, sometimes is always very easy but since you can't find it just do a master reset.
start,-settings-security-factory reset hope this work
same problem here, hard reset didn't change anything.
maybe you want to try this (stops working after soft reset, until i re-install) or this (also doesn't work right for me).
maybe one of theses two works for you.
the last option would be to go to \Windows\Lockscreen and rename the "LS_PhoneCallScene_480x800.cpr" (brings back the default wm 6.5 lockscreen) and then lock the device (windows button --> lock) on each call.
This app can help you.
http://forum.xda-developers.com/showthread.php?p=52931285
Related
My problem is that my screen goes flashing off and on when i want to toggle the screen off by some program..(windows media player for example).. when i press the key mapped to toggle the screen the screen keep turning on and off on very speedy.. i keep pressing the key for "?" times till it completely off.. the ? is not a fixed number.. it's sometimes 3 or 4 or 5 or 10 or maybe more...
it's very annoying.. do you know anything i can do that will avoid me a hard reset??
Best Regards
i did a hard reset and got the same problem.. though i didnt have this problem earlier..
what do you think??
Perhaps a work around for your problem is to download and install one of the freeware applications that you allow you to use a software control to turn the screen display of without turning the PPC off?
I did that and it works just fine..
but that's really strange.. i thought it wont work..
well this workaround is enough but i really want to know what happened to my screen..
I just got new HTC Diamond HD phone from Orange.
Whenever I make a call, the phone goes to standby and I have to turn it on again from the top.
This does not happen if the phone is kept straight, only happens when the phone is close to the ear (may be some sort of light sensor).
Please help.
I have tried a few setting in registry but it still same.
Hi
maybe u can try THIS
sure this is what you are looking for...
cheers
Try a hard reset. My phone was hanging during a call. After hard reset everything ok
PhaseIV said:
Try a hard reset. My phone was hanging during a call. After hard reset everything ok
Click to expand...
Click to collapse
That don't work, still goes off (light goes off), as soon as I dail a number and take to my ears. Phone is still connected and talking the actual handset goes off.
press the home button and the screen comes back on.
or pull the stylus out
thanks for your advise.
Any more ideas, keeps it awake without using stylo or press home page key.
Firstly, it's HTC TOUCH HD, not diamond hd.
Secondly, I think you are talking about protection during the call. If u'll turn it off, u would press some buttons or even hang with your ear
Sorry, It is HTC Touch HD.
I have cound the way to fix it.
This problems is caused due to the light sensor. This setting can be disabled.
I download HD tweak form http://montecristoff.webs.com/ and disabled the light sensor and it all works fine.
Thanks to all
hi, i'm having trouble getting my touch hd to lock the keypad. i've searched the forum for similar threads but cant find too much. I've followed the advice of people in other threads.
I have tried a soft reset, and a hard reset. Gone to settings changed the End Button properties. But still cant get it to lock. In the End Button i have set it to show a quick menu. On this when i click the Lock Keypad, there is a couple second delay, then the screen flashes (as if it has done something) but the keypad is still not locked.
Anyone help me out??
windstate said:
hi, i'm having trouble getting my touch hd to lock the keypad. i've searched the forum for similar threads but cant find too much. I've followed the advice of people in other threads.
I have tried a soft reset, and a hard reset. Gone to settings changed the End Button properties. But still cant get it to lock. In the End Button i have set it to show a quick menu. On this when i click the Lock Keypad, there is a couple second delay, then the screen flashes (as if it has done something) but the keypad is still not locked.
Anyone help me out??
Click to expand...
Click to collapse
Not sure why your End button isn't working after you hold it down to lock.
However, you do have many other options for locking your device.
For example you can can use LockMeLite. Or use HD Tweak and set Autolock to enable so everytime your backlight goes off the device is automatically locked.
There is also various other options if you search a bit more
Seen this happen on Windows mobile phones before.
Do you happen to use a PIN code to unlock your phone?
If you do, this interferes with the screen lock facility.
Try disabling the PIN lock (Settings/Lock) and you will probably find it will then start to work.
Don't know of a way around this problem but someone else may..
Fallen Spartan said:
Not sure why your End button isn't working after you hold it down to lock.
However, you do have many other options for locking your device.
For example you can can use LockMeLite. Or use HD Tweak and set Autolock to enable so everytime your backlight goes off the device is automatically locked.
There is also various other options if you search a bit more
Click to expand...
Click to collapse
Thanks for the advice. I will look into other applications to use on the phone.
Farsquidge said:
Seen this happen on Windows mobile phones before.
Do you happen to use a PIN code to unlock your phone?
If you do, this interferes with the screen lock facility.
Try disabling the PIN lock (Settings/Lock) and you will probably find it will then start to work.
Don't know of a way around this problem but someone else may..
Click to expand...
Click to collapse
Thanks. I had a pin code thing on the phone. Took that off and the keypad lock now works! Excllent advice. You sorted out my problem. The keypad lock issue was annoying me so much that I was considering returning the phone. Now I'll be keeping it!
I wish to know if other users may have encountered this minor problem ...
It happens from time to time that after pressing the left "telephone" button or soft-key, the numeric telephone keypad DOES NOT appear (i.e. it is impossible to compose new telephone numbers). The middle softkey does not work in these cases. A soft reset has sofar always fixed the problem. I have tried many possible solutions, but this problem always come back, usually 1-2 times a day.
Any help or advice?
Thank you very much
Paolo
Chickinox said:
I wish to know if other users may have encountered this minor problem ...
It happens from time to time that after pressing the left "telephone" button or soft-key, the numeric telephone keypad DOES NOT appear (i.e. it is impossible to compose new telephone numbers). The middle softkey does not work in these cases. A soft reset has sofar always fixed the problem. I have tried many possible solutions, but this problem always come back, usually 1-2 times a day.
Any help or advice?
Thank you very much
Paolo
Click to expand...
Click to collapse
it happens with windows build 6.5.x and it is the problem of htc dialer with windows mobile new builds, as far as i know there isn't any solution for it yet just soft reset ... correct me please if i'm wrong!
i use temporary solution which helps to recover dialer go on home... rotate landscape... rotate portrait and press call button and its there
Or you can just set the Phone App to auto rotate using something like BsBTweaks. That way it the phonepad messes up, you just tilt the phone one way and then back again and hey presto. Keypad back and working again.
When I press the hang up button to turn the screen of and then I turn it back on and you have to slide, when that screen comes up I can't slide it across it just simply wont let me no matter how hard I try. I would appreciate. it if someone can help me with this.
What lock screen are you using mate?
Wish I knew, lol.
sniper-wolf said:
What lock screen are you using mate?
Click to expand...
Click to collapse
The one that came with the phone, Just slide it to the left or right and when you get a message you can press then slide for message only.
any one?...
Metta24 said:
When I press the hang up button to turn the screen of and then I turn it back on and you have to slide, when that screen comes up I can't slide it across it just simply wont let me no matter how hard I try. I would appreciate. it if someone can help me with this.
Click to expand...
Click to collapse
Try a hard reset!
I had a similar problem with my phone. The slider would not move left or right so it was impossible to unlock the phone. It was very frustrating.
After a few episodes of this I noticed that when it happened the hard buttons below the screen did not illuminate but if I woke up the phone using any one of these buttons and held the button down until all of the buttons lit up the slider would work. This was more of a work-around rather than a fix.
More recently, since installing the remarkable Co0kies Home Tab, I have not experienced any unlocking problems whatsoever.
Hope this helps.
Talk to your ROM chef (if it´s not stock). Try a soft-reset, if it wont help backup your system and do a hard-reset.
My Rom chef? I don't get what you mean by Chef haha, It is stock rom and what files do I back up with a hard reset?