FroYo finally implements BT dialing (ability to initiate a voice dialer using BT button). However it seems badly broken on my phone: when I initiate a call through BT, the audio is no longer routed through it. The phone thinks it is connected to BT (the bt button is toggled), however the audio comes from the internal earpiece.
I have both Voice Dialer and Voice Dialer HF installed, and it's the same with both of them. When I initiate a call not through BT, but from N1 itself, everything works fine.
Does anyone else have this problem?
No, it works as expected for me: everything is just the same, regardless of whether I dial the call on the phone or use the bluetooth voice dialing.
Related
Hi. I have a Spring ppc-6700 running wm5 with the latest rom.
My problem is that I cannot use the BT headset to talk on Skype or to listen to music from the computer. I do not know how to switch to the headset. It's paired and i see the headset icon on the screen. Before the latest rom i used to press the action button on the headset and it would switch to it. Now when i press the button i get this annoying voice dialing feature.
OT: When i use skype it only works in speakerphone mode. Any way i can get skype to work through the earpiece so emulate talking on the phone?
Thanks.
This is normal behavior.
Skype does not support the phone functions on Pocket PC and so your (mono) Bluetooth headset does not get its sound. The same happens for ANY application that is not part of the "phone" functionality of the Pocket PC. The mono Bluetooth headsets ONLY work with applications that recognize the "HSP or HFP Bluetooth profiles".
>Any way i can get skype to work through the earpiece
There are two ways to do that:
1. Email Skype and tell them to get their sh*t together and provide a phone-friendly version of Skype that supports HSP/HFP.
2. Buy a *stereo* Bluetooth headset. This will work both for music and general pocketPC sound (in A2DP/AVRCP mode) and in HFP/HSP mode (for phone calls). With a stereo Bluetooth headset you can hear the Skype sound on your headphones, but you will still need to talk using the PocketPC's microphone (until Skype supports the HSP/HFP profile that is). For normal phone calls, you will be able to use the headphones and microphones of the BT headset directly.
It all boils down to applications support the HSP/HFP BT profile.
i've used the bluetooth headset with skype before but after this update with the stupid voice dialer app, i just can't get it to work at all. I want to get rid of voice dialer app. and have sound being routed to the headset as before.
I tried BTAudioToggle.exe with no success. Absolutely nothing happens.
FIXED.
I went to
HK_LOCAL_MACHINE\SOFTWARE\OEM\VOICECOMMAND\Path
And cleared the path. This way when i press the bluetooth button on the headset it just activates the headset profile but doesn't launch the stupid voice dialer which shuts off the headset profile.
I have a Sony Ericcson HCB-150 bluetooth car speakerphone paired to my Elfin. When I was using the Blue Elves ROM, voice dialing through the BT speakerphone worked fine. I recently flashed the Onyx ROM which uses Opal and Manilla 2d. The bluetooth speaker phone works for incoming calls and outgoing calls except for voice dialing outgoing calls.
The problem is this: I can initiate a voice dial on the BT kit and speak the name. It recognizes the name and begins dialing the number. At this point there is no sound coming from the BT kit. It is as if the call was transferred back to the phone. If I pick up the phone I can hear the sound of the number dialing. Once the call is answered, people can hear me through the BT kit but again I have no sound from it. Also I must end the call using the phone.
Any ideas why this is happenning or how to fix it?
Well I flashed the Opal R2 Full ROM and Bluetooth voice dial is working with it.
I used to have VoiceCommand and BlueAudio perfectly working on my X1. Now this crappy X2 that messes up so much, canNOT run any Audio to the Bluetooth Headset.
It should have the MS Bluetooth Stack so these programs should work. Perhaps it is some registry change that makes them work?
Anybody got them to work and know how to? Thanks!
It seems that the Bluetooth AudioGateway dll files is not working properly. Tried different dll's from different versions but still did not find the "correct" working one. Anybody???
Couldn't get MS Voice Command working.
Vito Voice Dialer works great though.
Haven't managed to make my X2 work with my existing bluetooth headset.
X2 says it's paierd with the device, but then you can't answer calls or anything else.
If it wasn't for the $$$ I spent to buy this piece of crap, I'd have a new phone already!
Okay, is this vito voice dialer dialing VIA bluetooth or not? And HOW do you press a key on the phone to activate it? What key? And just read their manual, they don't even mention any bluetooth capability there. Can you use bluetooth and how?
Because voice command works (more or less) HOWEVER NOT via bluetooth and since there is NO hard/software button to assign to it, it cannot be activated via the phone either!
I have to press the bluetooth button and then the sound (mic and voice) come out of the phone speaker.
I strongly think this has to do with the bluetooth gateway SE is using with the X2. But I was hoping somebody technical could have found a solution by now. For me voice dialing is essential and my X1 was perfect.
With blue audio I could listen to musik on a mono bluetooth!
Just to mention it, I use SE hbh-PV740 and it always works if making 'regular' calls via the phone over bluetooth. But I cannot initiate it nor voice dial.
I can't get my X2 to do anything with my bluetooth kit, so all your questions re: bluetooth I can't answer.
I start vito from a button on the screen and it works.
For me and my phone, the vito product is much more accurate and reliable than voice command.
Hello everyone, I run into a really weird problem on my Note 4 when receiving voice calls while using a bluetooth headset.
Summary:
If BT headset is not already connected before initiating or receiving a voice call, you have to press bluetooth button during the call to direct sound to phone and then back to the BT in order to get the mic on the headset to work.
More Details :
1. Incoming Voice call
2. While phone is ringing i turn on the bluetooth headset.
3. I answer the call(Either from phone or the headset)
4. I can hear the other party, but he doesn't hear me.
5. The bluetooth headset mic is not working, neither the phone's mic.
6. If i press the bluetooth icon on the phone(while in a voice call) to direct audio to phone, everything works fine.
7. If i press again to direct audio back to bluetooth headset, everything works fine.
8. If the headset is already connected to the phone before i receive the voice call everything works fine.
9. If i make a voice call (maybe cause headset is already connected?) everything works fine.
10. Problem doesn't occur if it's a VOIP call through skype viber etc.
10. Using plantronics Marque M165 & M55, I have unpaired both repaired, cleared bluetooth cache etc problem still there. Lollipop 5.0.1.
For me it's a big issue since if i have the phone in my bag/pocket i have to take it out in order to be able to use the headset, which kind of defeats the purpose.
Anyone facing this ? Any suggestions?
Sorry for the long post & thanks in advance !
Anyone?
Anyone with similar problems ? Any ideas or suggestions ???
Yes, I have a similar problem, but with my car's bluetooth (the only hands free I use). This problem started after I upgraded to Lollipop, and it worked fine in KitKat.
With te device connected to the car's bluetooth, I have to make the call in the phone's Speaker mode until the other party answers. Only then I can switch to bluetooth.
If I make the call in bluetooth mode, I won't hear the ringing through the car's speakers and even after the other party answers, we cannot communicate.
This is a serious bug. It is my 4th Samsung Galaxy phone, and the only one that doesn't work properly. My previous S4 worked perfectly and I regret profoundly having bought the Note 4.
Ironically i don't face the problem you have. Mine works fine with my car's BT but i suppose this happens because in my case the car's BT is already connected to the phone.
I suppose you have tried to repair the bluetooth/ cleared BT cache etc right ?
I've just tried the phone with a Samsung bluetooth and problem solved !....So it doesn't play well with the plantronic's BT , warning for potential buyers !
So I recently got a Plantronics Voyager Edge headset and noticed an interesting bug...
Every function appears to work fine. I can communicate with the phone via voice through the headset. And if I search for a business or something and hit the call button in the search results, everything works fine.
If, however, I dial a number manually or select a number from my contacts - the call isn't immediately sent to the headset. I have to toggle the speaker phone and then back to the headset to get the call to go through the headset.
Anyone had this issue? If so, is there a fix you're aware of?