So I recently got a Plantronics Voyager Edge headset and noticed an interesting bug...
Every function appears to work fine. I can communicate with the phone via voice through the headset. And if I search for a business or something and hit the call button in the search results, everything works fine.
If, however, I dial a number manually or select a number from my contacts - the call isn't immediately sent to the headset. I have to toggle the speaker phone and then back to the headset to get the call to go through the headset.
Anyone had this issue? If so, is there a fix you're aware of?
Related
I've just got jabra bt800 to match my xda atom. I've paired the earpiece with my atom. It works fine when receiving and making calls. However I really want to know how it can initiate voice dialup program by clicking buttons on my bt headset. I tried different ways even combination of buttons. It didn't work!!!!!! I think there must be some work 2 be done on the registry.
Can someone help me out????
btw, if I hold the call button on my headset, the phone software switches on
I am encountering a problem where after some time (do not know how long exactly) my BT headset seems not to synchronize with my TyTN. So when an incoming call arrives I am unable to answer it using the BT headset. Also, when I try to use Voice dialing it efuses to use my BT headset.
Only when I do a soft reset it works.
any ideas?
I have the same problem with a SonyEricsson HBH-610A.
Some times the bluetooth stops it self and I have to activate it agan.
Today when I tried to install the headset again, it searched forever and then I got the message, "Problem with Internal Bluetooth Hardware" and a OK button??
Only when I do a soft reset it saves the problem.
It actually drives me nuts, because I want to answer calles when the TyTN is in its holster.
I am using a Plantronics 655 with my TyTN running VC 1.5 with the common registry hack and have similar problems but not exactly the same. I want to be able to initiate voice dialing via the headset but when VC repeats the command it comes through the phone speaker and not the headset which also means my confirmation of the command has to be through the phone rather than the headset. Also, when a call comes in my TyTN speaks the name and number of the calling party through the telephone speaker but only beeps in my headset. To me it should be speaking to me through the headset.
I'm trying to get down to the bottom of this issue so it can be resolved through coordinated pressure on the responsible party(s).
Any help I receive will go to help all BT users of VC on the TyTN.
I am using a Plantronics 655 with my TyTN running VC 1.5 with the common registry hack and have similar problems but not exactly the same. I want to be able to initiate voice dialing via the headset but when VC repeats the command it comes through the phone speaker and not the headset which also means my confirmation of the command has to be through the phone rather than the headset. Also, when a call comes in my TyTN speaks the name and number of the calling party through the telephone speaker but only beeps in my headset. To me it should be speaking to me through the headset.
I'm trying to get down to the bottom of this issue so it can be resolved through coordinated pressure on the responsible party(s).
Any help I receive will go to help all BT users of VC on the TyTN.
Hi All: I have paired the headset fine with my phone and made calls before but I can not switch a call from the handset to the headset while a call is already in progress. Once I end the call, I can pair the headset fine to make a NEW call but I'm having problems switching the call when it is already in progress. I can go to the phone and manually switch it to hands free but I thought that if I powered on the headset while a call was already in progress, that would route the conversation from the handset to the headset. Is that correct or can it not do this without some tweaking? Thanks.
I have the same setup and I can answer the call on the phone, then "open" the H700 and the phone re-directs the call thru the headset within about 2 seconds from opening the headset.
If I'm on the headset, I can press and hold the call button on the H700 and the call goes on hold. I can "close" the headset and then un-hold the phone using the touch screen and resume the call on the 8525.
Now I believe that the standard bluetooth stack is crap, and I have had many instances where the phone just stops linking the Bluetooth. I can usually restore the link just by using the comm manager to turn off the bluetooth radio, then turning it back On. I have even done this during a call and it worked.
I have always had solid, loud audio with the H700, BUT, several callers have mentioned that my voice was often clipping a word every few seconds. I don't know what that's all about.
Do you know whether you need to select any special settings or do anything special in the pairing setup with the phone or headset? I do not know how to have the conversation directed to the headset after turning it on when I am already on the call. It works fine to start a new call or to answer a call directly through the headset but can't join a call in progress. Would appreciate anyone's help. Thanks.
love this phone but don't know if i have a problem or i'm just using it wrong and i'm an idiot,
i use an o2 blue hands free bluetooth and when i get an incoming call it rings nicely in my ear and i press button on the o2 blue and answer the call and it all works beautifully.
however if i'm making the call, i dial the number on the phone press green phone button and the bluetooth doesn't kick in the call stays on the phone.
(you don't press anything on the bluetooth as it don't work that way)
is this a bug or is there a specific way to make a call on the handset so the bluetooth kicks in??
(apologises in advance if i'm missing the blindingly obvious)
Hi, Scottydog -- I've been using the P6500 with a Bluetooth headset (Plantronics Voyager 815) without any problems. Though to the extent that things don't work properly, I have the opposite problem: when I _make_ calls with the headset connected, all is fine; but when I _receive_ them, calls initially go to the handset and I then have to choose "Turn Hands-free On" from the right soft-key menu to get the call on my headset.
Have you tried doing this after you dial calls?
Wish I had something better to suggest!
Alan
FroYo finally implements BT dialing (ability to initiate a voice dialer using BT button). However it seems badly broken on my phone: when I initiate a call through BT, the audio is no longer routed through it. The phone thinks it is connected to BT (the bt button is toggled), however the audio comes from the internal earpiece.
I have both Voice Dialer and Voice Dialer HF installed, and it's the same with both of them. When I initiate a call not through BT, but from N1 itself, everything works fine.
Does anyone else have this problem?
No, it works as expected for me: everything is just the same, regardless of whether I dial the call on the phone or use the bluetooth voice dialing.