i have stock spl 2.10.0000 which version spl do i need to flash?
I presume with that spl that you have a TMO US 1024 HD2? You'll need to try to revert to spl 2.08.0000 before you can use HSPL_1024.
Flash an earlier version of the TMO US rom (ie the 2.10 rom) from the sd card. You can find it here - http://www.4shared.com/dir/22189940/b8552fa0/Shipped_Leo_ROMs.html
hey thx for replying back so fast but when i goto link i dont undetsyand which file to click. also i posted in the mod hack upgrade section and no one answered do u think you could check that out?
Click on the Leo 2.10 folder - inside you will find the rom file (2 parts) - RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50 .07U_2.08.50.08_2_Ship.part1.rar and RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50 .07U_2.08.50.08_2_Ship.part2.rar
Download these and then unpack them with WinRAR. I haven't downloaded the files, but you'll probably get an .exe file. Right click on this and select "Extract Here", one of the files extracted should be a LEOIMG.nbh (or ***.nbh) file. Copy that to your sd card and flash from there. There is also a RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50 .07U_2.08.50.08_2_Ship.txt file at that location, so try download that also and see what instructions it gives.
sorry it took so long to reply but,i was unable to do it.this is what i did:
i went to link
downloaded part 1 and 2
extracted both together on desktop
put nhb (which wasn't the exact name) in root of my card
mind you i synced and said connected in corner
then clicked on update file from pc
did its thing, (where it say current version and junk it was blank?)
(is that normal?)
my phone wemy to red green white screen and said usb at bottom (what is that screen called?)
then i seen on my pc the 10th minute thine with progress bar
and lastly, it said error. no usb connection
what went wrong and sorry bout errors in reply I'm doing this on my phone
thx for help
firebadbobb said:
sorry it took so long to reply but,i was unable to do it.this is what i did:
i went to link
downloaded part 1 and 2
extracted both together on desktop
put nhb (which wasn't the exact name) in root of my card
mind you i synced and said connected in corner
then clicked on update file from pc
did its thing, (where it say current version and junk it was blank?)
(is that normal?)
my phone wemy to red green white screen and said usb at bottom (what is that screen called?)
then i seen on my pc the 10th minute thine with progress bar
and lastly, it said error. no usb connection
what went wrong and sorry bout errors in reply I'm doing this on my phone
thx for help
Click to expand...
Click to collapse
after you put the file onto your sd card, and rename it leoimg.nbh
, you restart the phone into bootloader and it flashes, , nothing to do with the pc at all.
well now im making some progress. i renamed that file to leoimg. then powered down then held volume down and then yellow button. it did nothing, then i turned it back on. this time i did volume and yrllow button. it came to the green blue red white screen did nothing. so i renamed the file again this time added .nbh. did it again. nothing. what gives? where on sd card does it need to be?
firebadbobb said:
well now im making some progress. i renamed that file to leoimg. then powered down then held volume down and then yellow button. it did nothing, then i turned it back on. this time i did volume and yrllow button. it came to the green blue red white screen did nothing. so i renamed the file again this time added .nbh. did it again. nothing. what gives? where on sd card does it need to be?
Click to expand...
Click to collapse
Be sure that the file is really named "leoimg.nbh". Do you have hidden extensions enabled in the OS!? If the file is correctly named and still a no go, try with other sdcard.
if you have a 16gb card you should deff try find a smaller card.
sorry it took a while to reply. the file i got was named romupdate.nbh. how do i enable hidden extensions? and why do i need a smaller sd card?
cos lots (not all, but a good number) of people using teh stock 16 gb card have had problems, , , some have had problems with 8gb, and less have had probs with 2gb cards.
if you can see the .nbh part of romupdate, then you dont need to worry about showing extensions. Just rename it leoimg.nbh and copy to sd.
also.
well now im making some progress. i renamed that file to leoimg. then powered down then held volume down and then yellow button. it did nothing, then i turned it back on. this time i did volume and yrllow button.
Click to expand...
Click to collapse
you dont go near the yellow button to enter bootloader.
phone off
press hold and keep holding vol down
tap and release power
release vol down only when bootloader starts.
Related
everytime i try to install (volume down button + power button) it says "No image found". It really frustrates the living sh*t out of me! i completed everything untill the last step:
* Uncompress the .rar file to get the .image file.
* Rename the .image file to Kovsimg.nbh
* Copy the Kovsimg.nbh file to the top of the SD card.
* Remove the battery for 5 secs (guarantees the phone is turned off).
* Hold down the volume down button, then hold down the power button at the same time.
* After 2-3 secs you'll see the reg/green/blue stripes, then it will go to a light grey background saying "Loading".
after that it says No image found!
someone able to help me?
Well
I just noticed you created another thread too, I'll only read this one, no need for two.
If it can't find the image it can be a couple of things. The image isn't in the correct format, the image is not an acceptable image or the memory card isnt formatted correctly (FAT32).
I got one ROM from this site it was an R1A UK GENERIC, it had a very short title on the rar and also gave image not found.
If you go to the ROM thread and download the ones with the full title including version number they should work fine.
I downloaded the Dextermod 1.2 without issue to my sd card, but applying mod didn't not show android market but did erase any apps loaded from appoke market. So I found and tried to download 1.3, but it does not ask to change file name and then says download unsuccessful in the notifications bar. Tap it and get popup, "Cannot download. The content is not supported on this phone." So I try the 1.2 mod again and get the same message. Anyone else with this problem or can help me with a fix?
Downoad it on a computer and put it on your sd, android webkit browser doesnt like zip files.
Rename it Update.zip before running.
Looks like your new like me. I downloaded to sd card. (make sure card is clean. I had a problem with that first-no windows files) Also I downloaded file from my pc to the card in a dongle Then transfered card to the A7. went to file manager. found the file on the card (elocitymodv13) under sdcard\sdcard-disk0 and then press on it until menu came up and hit rename and then renamed it update.zip. finally go through the routine of powering off A7, then hit power key for 2 seconds, let off, and then hit power button again until message comes on screen about entering recovery mode.
Then use the menu key on side of screen to enter recovery menu once the android image shows up. you then need to use search key and back key on side of screen to move up and down the menu. First move highlight down to "Wipe/factory reset" and hit menu button to apply command. (Dexter recommends wiping the slate clean to ensure proper function of his mod.) When that is done, you will see the menu again and move down to "apply sdcard:update.zip" and hit menu buttom to apply command. this will then put the new mod. on the system. The only other thing that will be neccessary is to go back and download the "ElocityMod v1.3 bluetooth fix" http://forum.xda-developers.com/showthread.php?t=890042 . This update gets applied the same way as above except you dont obviously need to use the wipe/factory reset command again. This will give you bluetooth function back. I hope this is clear enough.
I have been trying since I got the thing to tether it to my windows mobile phone. Good luck with that. I still haven't found an answer. take care.
file name
as stated
download the file to your computer. then rename it to update. Just
update
You don't need to put .zip at end because its already a zip file. Then transfer it on to your sd card. Easiest way is to open your My computer drag and drop to the dir that is sd card on your computer that way it automatically goes into the root of the sd card.
then do the as stated flash update procedure.
t_sandat8 said:
as stated
download the file to your computer. then rename it to update. Just
update
You don't need to put .zip at end because its already a zip file. Then transfer it on to your sd card. Easiest way is to open your My computer drag and drop to the dir that is sd card on your computer that way it automatically goes into the root of the sd card.
then do the as stated flash update procedure.
Click to expand...
Click to collapse
Jesus, this just doesn't stop.
The file NEEDS TO BE Update.zip
Please read the writeup I just made this morning describing why people are getting screwed up on this, how to fix it, and why I rag on people like you who put out misinformation.
http://forum.xda-developers.com/showthread.php?p=11745552#post11745552
Hi, I know that to take off the custom roms, you need to flash the stock rom but how do you remove android, clockwork mod, and magldr off the phone? my phone has been acting up and i need to send it back through the hd2 insurance but i need to reset everything first. Thank you!
i need help how i can restore all settings plz help me
Download the spesific rom for your device from the HTC website. Eg if you are on the HD2 o2, you would download that rom. It comes as an .exe file.
Right click on the file and extract the contents to someware on your desktop, look for the .nbh file. Cant quite remember the name but it will be the biggest file. Rename it to leoimg.nbh and copy it on to your SD card.
Make sure it is the correct rom for your phone or it wont work.
Once you have done this reboot the phone and hold the volume down button at the same time to get into the boot loader. It will then prompt you to install the rom. This will remove everything and restore back to factory default for you and reinstate your warrenty!
Next time you shoud use the search button. If you had did this you had found this thread about it http://forum.xda-developers.com/showthread.php?t=1066852&highlight=restore+factory
Good luck!
mattijs86 said:
Next time you shoud use the search button. If you had did this you had found this thread about it http://forum.xda-developers.com/showthread.php?t=1066852&highlight=restore+factory
Good luck!
Click to expand...
Click to collapse
sorry, i tried using the search button but it kept coming across as "search capacity overloaded" or something like that. Next time i'll be more patient.
sorry for double post but i tried renaming the .nbh file to LEOIMG.nbh and when i go into the bootloader, nothing prompts up asking me to install the new rom. Help please?
okay, i went into the bootloader, put in the usb, and tried to press the .exe file but it won't let me press next.. someone PLEASE help
kjeong3514 said:
okay, i went into the bootloader, put in the usb, and tried to press the .exe file but it won't let me press next.. someone PLEASE help
Click to expand...
Click to collapse
In order to continue proper drivers must be installed. Check if when connecting usb there is on screen "USB". However if you install the exe file your SPL will not be restored to original.
If you want to return it to factory you need to do it via SD card. Or by exe but you then have to install SPL manually.
Try again, rename the largest nbh file to leoimg.nbh put it to sdcard root and reboot to bootloader.
Bootloader is the one with 4 different colors. To boot powerup phone and hold Volume Down key.
zach.antre said:
In order to continue proper drivers must be installed. Check if when connecting usb there is on screen "USB". However if you install the exe file your SPL will not be restored to original.
If you want to return it to factory you need to do it via SD card. Or by exe but you then have to install SPL manually.
Try again, rename the largest nbh file to leoimg.nbh put it to sdcard root and reboot to bootloader.
Bootloader is the one with 4 different colors. To boot powerup phone and hold Volume Down key.
Click to expand...
Click to collapse
There is "USB" on the screen and I believe i have the proper divers installed.
I downloaded the 3.14 t-mobile official rom and renamed the largest file (.nbh) to leoimg.nbh (and i tried LEOIMG.nbh, if it makes a difference for the CAPS) but nothing appeared on the bootloader screen. I tried to install the rom by the .exe file because i would rather get the official rom on so i can remove hspl manually but the "Next" button is grayed out. It won't let me go onto the next step. :/
What size sd card did you use? It usually wont work on a card bigger than four gigabytes. Try it on a class two, four gigabyte or less micro sd card.
Sent from my HTC HD2 using XDA App
i tried using a smaller sd card (4 gigabytes) and had no luck. the "next" button is still voided out..
kjeong3514 said:
There is "USB" on the screen and I believe i have the proper divers installed.
I downloaded the 3.14 t-mobile official rom and renamed the largest file (.nbh) to leoimg.nbh (and i tried LEOIMG.nbh, if it makes a difference for the CAPS) but nothing appeared on the bootloader screen. I tried to install the rom by the .exe file because i would rather get the official rom on so i can remove hspl manually but the "Next" button is grayed out. It won't let me go onto the next step. :/
Click to expand...
Click to collapse
If you're trying to Install windows back onto phone from original T-Mobile download don't modify there's original files...you don't have to change any files.once u see USB on the screen of you're phone u just run the windows mobile Install as usuall...
Sent from my Nexus One
bigfdaddy said:
If you're trying to Install windows back onto phone from original T-Mobile download don't modify there's original files...you don't have to change any files.once u see USB on the screen of you're phone u just run the windows mobile Install as usuall...
Sent from my Nexus One
Click to expand...
Click to collapse
even if i don't modify the files, the "next" button is grayed out (can't move on to the next step). It doesn't really make sense and i'm kind of stuck now.
Good day everyone, I have a friend who have me an HD2 from T-Mobile to fix, I'm not familiar with this phone and I don't know where to start, it was initially on WP7,
right now its on aMAGLDR 1.13
When I try to boot the phone it gives the following error
booting android from nand
From nand
yaffs2 part is /boot
Load zimage
nand kernel open failed
Can someone point me in the right direction to restore the phone back to its original state?
Thank you,
Rodi
Sent from my GT-I9000 using XDA Premium App
How this link can help and match what u looking for.
http://www.jayceooi.com/2011/01/18/how-to-remove-windows-phone-7-from-htc-hd2/
Thanks for the info, but it's not working,
- I downloaded the T-Mobile_HD2_MR_Software_3.14.531.1.exe file from tmo's website
- changed the extension to .zip
- extracted RUU_signed.nbh
-renamed to LEOIMG.nbh
- put both files in the root of sd card
-power up with volume down held it takes me to the screen with the 4 colors, in the white part it writes SERIAL and then I can't do anything else other than removing the batterie
Any ideas?
Thanks again,
Rodi
Sent from my GT-I9000 using XDA Premium App
Khar00f said:
Thanks for the info, but it's not working,
- I downloaded the T-Mobile_HD2_MR_Software_3.14.531.1.exe file from tmo's website
- changed the extension to .zip
- extracted RUU_signed.nbh
-renamed to LEOIMG.nbh
- put both files in the root of sd card
-power up with volume down held it takes me to the screen with the 4 colors, in the white part it writes SERIAL and then I can't do anything else other than removing the batterie
Any ideas?
Thanks again,
Rodi
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
To restore my phone i run T-Mobile_HD2_MR_Software_3.14.531.1.exe (with phone on tri color screen) follow prompts.. done
Khar00f said:
Thanks for the info, but it's not working,
- I downloaded the T-Mobile_HD2_MR_Software_3.14.531.1.exe file from tmo's website
- changed the extension to .zip
- extracted RUU_signed.nbh
-renamed to LEOIMG.nbh
- put both files in the root of sd card
-power up with volume down held it takes me to the screen with the 4 colors, in the white part it writes SERIAL and then I can't do anything else other than removing the batterie
Any ideas?
Thanks again,
Rodi
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Actually what you have to do is like this step:
1. Download the full CORRECT STOCK ROM. You have to be sure that it is the CORRECT STOCK ROM (not only the STOCK ROM)
2. You have to extract the .exe file using 7zip, WInzip or WInrar (no need to change to Zip first. You can directly extract it)
3. Find the among the extracted files, the file name: RUU_signed.nbh. And rename it to: leoimb.nbh (remember .nbh is an extension for image file)
4. Format your micro sd card with Fat32. (dont forget to back up all the data therein). Copy the leoimg.nbh to the root of your sd card using card reader.
Some the condition of your sd card affect the process, such as bad block, damage, etc. Also, consider to use lower capacity, 4-8 GB is recommended (although I never have problem flashing via sandisk micro Sd card with 16GB capacity)
5. Go into bootloader screen and wait until the four colors screen change to all white color and there will appear the instruction. Just follow the onscreen instruction.
Done..
KrisHilbun said:
To restore my phone i run T-Mobile_HD2_MR_Software_3.14.531.1.exe (with phone on tri color screen) follow prompts.. done
Click to expand...
Click to collapse
Just tried that and it worked, had to install windows mobile device first.
Thank you, your help is appreciated
Rodi
Sent from my GT-I9000 using XDA Premium App
How do I put the phone on the tri-color screen?
mirrage331 said:
How do I put the phone on the tri-color screen?
Click to expand...
Click to collapse
1. Turn the phone off.
2. Hold Volume Down button.
3. While holding Volume Down, turn on the phone with the End/Power button as usual.
4. You should see a tri-color screen. Now you may let go of the volume down button.
Connect to your PC and the bottom should say "USB" instead of "Serial". Then you can flash whatever you'd like (if you have HSPL installed).
editing the 'libnvomx.so' file from directory: system/lib, had replaced file to make netflix work, which it did, when going back I guess I left the 'libnvomx.so' file renamed 'libnvomx.so original'. rebooted tablet & now its stuck on the boot screen Android, then flashes & does it all over again. Is there anything I can do..
HD87 said:
editing the 'libnvomx.so' file from directory: system/lib, had replaced file to make netflix work, which it did, when going back I guess I left the 'libnvomx.so' file renamed 'libnvomx.so original'. rebooted tablet & now its stuck on the boot screen Android, then flashes & does it all over again. Is there anything I can do..
Click to expand...
Click to collapse
Download the latest Acer stock ROM to your PC (many stock roms found on this page). Transfer it to your external SD card and make sure to rename it "update.zip". Boot holding down volume and power until you see lines of text, then let it do it's thing
thanks for the info! I found a ROM on this thread.. not sure if its the latest 3.1 build.. http://forum.xda-developers.com/showthread.php?t=1154492
so I downloaded it to my PC.. comes as a ZIP file.. "update_3.1".. do I unzip folder & renamed it "update.zip"? or do I leave it zipped, rename it and transfer to SD card & boot up? again thanks for the help
Leave it named update.zip do not unzip
downloaded the update_3.1 file from that thread.
renamed folder "update.zip", left compressed.
transferred to external SD card on phone.
placed SD card into tablet, booted up by holding the power & volume button.
take you into SD update cmd: recovery..
its looking for the folder..
then comes on the android logo with an exclamation point!
no good..
might it be the ROM? any suggestions..
HD87 said:
downloaded the update_3.1 file from that thread.
renamed folder "update.zip", left compressed.
transferred to external SD card on phone.
placed SD card into tablet, booted up by holding the power & volume button.
take you into SD update cmd: recovery..
its looking for the folder..
then comes on the android logo with an exclamation point!
no good..
might it be the ROM? any suggestions..
Click to expand...
Click to collapse
If you downloaded it from the first link, the file needs to be decrypted first. I believe the second link on that page from megaupload is already decrypted. But that would be where the problem is.
And yes that is the latest build from Acer for the US!
I'm not sure what you mean.. consider me a noob at this.. never installed a ROM before.. encrypted or decrypted.. what would be what I need? couldn't find that second link you mentioned..
HD87 said:
I'm not sure what you mean.. consider me a noob at this.. never installed a ROM before.. encrypted or decrypted.. what would be what I need? couldn't find that second link you mentioned..
Click to expand...
Click to collapse
Sorry that wasn't the latest build, nor the thread I thought it was. 10th post down in this thread.
http://forum.xda-developers.com/showthread.php?t=1176632
Posted by
Xdachris.
Sorry, here is the direct link
http://www.multiupload.com/WCT2FYLMQC
Thanks for the help! that worked
HD87 said:
Thanks for the help! that worked
Click to expand...
Click to collapse
Right on! You know you can use clockwork mod to backup your system so it doesn't happen again.
You should use one of these versions, since your in the US.
4.010.07_COM_GEN2
4.010.08_COM_GEN2
4.010.11_COM_GEN2
4.010.13_COM_GEN2 (latest, not sure if it's posted anywhere yet)
The .40 version is not a US build.
interesting.. not sure what the difference is but can someone please post up 4.010.13_COM_GEN 2 & a how-to-install!
HD87 said:
interesting.. not sure what the difference is but can someone please post up 4.010.13_COM_GEN 2 & a how-to-install!
Click to expand...
Click to collapse
4.010.13 isn't a full rom like the one posted, merely an update.it can be obtained by simply checking for an update in "about device" in settings