Database Users

[Q] Dexter still not working!!

I downloaded the dexter mod via get right...it shows a 92.20 mb downlaod...i am downloading it from the page here where dexter posted in in the applications thread...
I performed a wipe data before I tried to install...should I try another sdcard? Still has the message...
Install from sdcard
finding update package
opening update package
E: can't open/sdcard/update.zip
(No such file or directory)
formatting MISC...
i would appreciate any help...I've done this numerous times and it still won't work...
Is there another link i might try to get the mod?
Can someone send me the mod?
Any other ideas?

Root directory
when I put the dexter mod on the sdcard, there is nothing else showing on it..I have also formatted the card and reinstalled the program...am I doing something wrong here? how do I make sure I am putting the mod in the root directory?
Thanks

kingjf54 said:
when I put the dexter mod on the sdcard, there is nothing else showing on it..I have also formatted the card and reinstalled the program...am I doing something wrong here? how do I make sure I am putting the mod in the root directory?
Thanks
Click to expand...
Click to collapse
Okay......did you rename dexters mod to Update.zip (make sure it's not Update.zip.zip. If your using Windows just right click and rename it to Update and press enter)? The root is the first directory you come to when you explore the card.
What method are you using to update? Are you shutting it down and then booting into recovery?

Recovery
I am booting into recovery mode as it says in the forum..press on, release press and hold...I will check renaming the file...trying another sdcard also...I'll let you know

I didn't do it that way. I just put the card in with the Update.zip file that I renamed...went into settings-->about device-->system updates where it looked for the "Update" file.

Size Matters
I encoutered this and began noticing the downloaded file was smaller than indicated when transfer initiated. I was getting files less than 50mb but should have been just over 90mb, using bad download file will cause failure in flashing. Verify your file size.

Manual Gingerbread update issues.

I have noticed a few other people having the same issues. When i try manually updating my phone, I get error no image. I tried renaming it just PD15IMG but it still shows up as PD15IMG.zip when trying to install via. hboot. I have followed the steps. I formatted my SD card, put the file on there, turned fast boot off, powered down the phone, hold the volume down button + power button and then hboot shows up, it tries to load and i get the error. Is there any other way I can try renaming the file? maybe it is the reason it will not recognize it as a update img.

Gman91 said:
I have noticed a few other people having the same issues. When i try manually updating my phone, I get error no image. I tried renaming it just PD15IMG but it still shows up as PD15IMG.zip when trying to install via. hboot. I have followed the steps. I formatted my SD card, put the file on there, turned fast boot off, powered down the phone, hold the volume down button + power button and then hboot shows up, it tries to load and i get the error. Is there any other way I can try renaming the file? maybe it is the reason it will not recognize it as a update img.
Click to expand...
Click to collapse
Are you using this http://megaupload.com/?d=N8XGHXJC uploaded by Gr33nF0x. I used this file 2-3 times now with 0 issues. If this is the file you have try a different sdcard. You don't half to rename it just do this
How to install this update (IF YOU ARE ROOTED YOU WILL LOSE IT )
You will lose apps and data on the phone but all data on sdcard will be fine
1. Download the PD15IMG.zip file posted http://megaupload.com/?d=N8XGHXJC
2. Put file on the root of your sdcard (leave it zipped and don't put it in any folder)
3. go to settings/applications make sure fastboot is unchecked (on 2.2.1)
4. power off
5. push and hold volume down and power till you get into hboot
6. it will scan file when its done it should ask you to update push volume up

I have tried it multiple times with 3 different SD cards. I've tried renaming it etc.

Did you try redownloading and checking MD5?

WOLF26915 said:
Are you using this http://megaupload.com/?d=N8XGHXJC uploaded by Gr33nF0x. I used this file 2-3 times now with 0 issues. If this is the file you have try a different sdcard. You don't half to rename it just do this
How to install this update (IF YOU ARE ROOTED YOU WILL LOSE IT )
You will lose apps and data on the phone but all data on sdcard will be fine
1. Download the PD15IMG.zip file posted http://megaupload.com/?d=N8XGHXJC
2. Put file on the root of your sdcard (leave it zipped and don't put it in any folder)
3. go to settings/applications make sure fastboot is unchecked (on 2.2.1)
4. power off
5. push and hold volume down and power till you get into hboot
6. it will scan file when its done it should ask you to update push volume up
Click to expand...
Click to collapse
I tried this a few times, I formatted all the SD cards, did a factory reset on my phone, re downloaded each one 3-4 times and it still wont go.

Jack_R1 said:
Did you try redownloading and checking MD5?
Click to expand...
Click to collapse
I have tried redownloading it, what is MD5? is there anyway you could send your copy to me?

Gman91 said:
I have tried redownloading it, what is MD5? is there anyway you could send your copy to me?
Click to expand...
Click to collapse
http://en.wikipedia.org/wiki/MD5
It's pretty much used to confirm the integrity of a file, good with large files that are downloaded.
http://www.pc-tools.net/win32/md5sums/

Ace42 said:
http://en.wikipedia.org/wiki/MD5
It's pretty much used to confirm the integrity of a file, good with large files that are downloaded.
http://www.pc-tools.net/win32/md5sums/
Click to expand...
Click to collapse
I downloaded it, but I am not very good with command lines, how would i check the integrity of the file? Like what would i type, the file path?

So I had a fellow from the forums send me his, still won't work. I'm beginning to suspect its my phone.

worked great for me thanks!!!

Can someone post a how-to video for me? I know its asking a lot. The only reason I am so eager to do this 1. I am a prepaid customer, It will take forever to get the OTA 2. the closest t-mobile RETAIL store is 80+ miles away. I have followed wolf's steps, attempted to check the MD5 of the file but can't seem to find the MD5 code on greenfox's file. Any further help would be much appreciated. This is the MD5 code that i got off the file, I just have nothing to match it against - c38aa6e2572ecec383eac5d6412dc6bf. Can anyone confirm or deny the MD5 checks out for me please.

Gman91 said:
I downloaded it, but I am not very good with command lines, how would i check the integrity of the file? Like what would i type, the file path?
Click to expand...
Click to collapse
Download an app called "mand5" on the market.
Works great
Sent from my HTC Glacier Sense 3.0 using XDA Premium app

[Q] Clean ROM flash

Getting ready to do the Clean ROM flash and I have a few questions:
1. The instructions say to Copy ROM to storage. When I navigate to my phone hooked to my PC, I can't find the "storage" folder. Any help with this step would be appreciated
2. How do I boot into recovery?
I have twrp installed and phone's rooted. Just need to know the button config. to go into recovery to follow the installation steps. TY

thestrangebrew said:
Getting ready to do the Clean ROM flash and I have a few questions:
1. The instructions say to Copy ROM to storage. When I navigate to my phone hooked to my PC, I can't find the "storage" folder. Any help with this step would be appreciated
2. How do I boot into recovery?
I have twrp installed and phone's rooted. Just need to know the button config. to go into recovery to follow the installation steps. TY
Click to expand...
Click to collapse
LOL! Sorry I had too. Someone needs there Coffee You copy the rom to your phones storage like where your pictures,Music, and stuff are at. They didnt say anything about a storage folder.
and 2. Download an app called reboot recovery in the market place
You should be cautious when flashing anything if you were looking for a "Storage" folder.

hyelton said:
LOL! Sorry I had too. Someone needs there Coffee You copy the rom to your phones storage like where your pictures,Music, and stuff are at. They didnt say anything about a storage folder.
and 2. Download an app called reboot recovery in the market place
You should be cautious when flashing anything if you were looking for a "Storage" folder.
Click to expand...
Click to collapse
LOL I know, I feel like a total noob for even asking. I have to have instructions literally step for step or else I lose confidence and don't follow through. I'm coming from an SGS2 that I rooted and messed with for the 1st month and never flashed anything since, so I'm pretty much starting over with this ROM stuff. Thanks for the help though!
EDIT: I'm gonna ask another noob question: Do I copy just the img file or the META & System folders too?

thestrangebrew said:
LOL I know, I feel like a total noob for even asking. I have to have instructions literally step for step or else I lose confidence and don't follow through. I'm coming from an SGS2 that I rooted and messed with for the 1st month and never flashed anything since, so I'm pretty much starting over with this ROM stuff. Thanks for the help though!
EDIT: I'm gonna ask another noob question: Do I copy just the img file or the META & System folders too?
Click to expand...
Click to collapse
:crying: what img file and meta system folders ? :crying: Don`t extract the zipped download, The ZIP is what you flash You dont have to extract it.
Ahhh S2 I had that phone when it came out it was one of my longest owned phones.

hyelton said:
:crying: what img file and meta system folders ? :crying: Don`t extract the zipped download, The ZIP is what you flash You dont have to extract it.
Click to expand...
Click to collapse
Holy smokes. I extracted it. ok i'll move the zip to storage. Thanks!

thestrangebrew said:
I'm gonna ask another noob question: Do I copy just the img file or the META & System folders too?
Click to expand...
Click to collapse
Dude! Never be afraid to ask (but if the answers are on the website and you didn't do a proper search, expect flame on!). :laugh:
Anyway, assuming you are on AT&T, you should have downloaded a file called CleanROM-1.1.zip . If you didn't get that one, go here http://www.scottsroms.com/downloads.php?do=file&id=464 and download it. Check the MD5 to ensure the file is not corrupt. Do not unzip the file! Just transfer the file onto your phone - it doesn't really matter where, just remember where you put it. Then reboot into recovery (assuming you have already installed TWRP) using whatever app you like (I prefer GooManager), click Install, navigate to the rom you just put on your phone and you're good to go.
Good luck!

AmbroseAI said:
Dude! Never be afraid to ask (but if the answers are on the website and you didn't do a proper search, expect flame on!). :laugh:
Anyway, assuming you are on AT&T, you should have downloaded a file called CleanROM-1.1.zip . If you didn't get that one, go here http://www.scottsroms.com/downloads.php?do=file&id=464 and download it. Check the MD5 to ensure the file is not corrupt. Do not unzip the file! Just transfer the file onto your phone - it doesn't really matter where, just remember where you put it. Then reboot into recovery (assuming you have already installed TWRP) using whatever app you like (I prefer GooManager), click Install, navigate to the rom you just put on your phone and you're good to go.
Good luck!
Click to expand...
Click to collapse
Thanks yea I did get teh 1.1 ROM and twrp is installed already. I just didn't want to go any further until I for sure understood the process. This feels alot easier then when I was working on the sgs2 and Odin. That and it's been at least 2 years since I've done anything like this lol. Thanks for the help, it looks like it's flashing now!

thestrangebrew said:
LOL I know, I feel like a total noob for even asking. I have to have instructions literally step for step or else I lose confidence and don't follow through. I'm coming from an SGS2 that I rooted and messed with for the 1st month and never flashed anything since, so I'm pretty much starting over with this ROM stuff. Thanks for the help though!
EDIT: I'm gonna ask another noob question: Do I copy just the img file or the META & System folders too?
Click to expand...
Click to collapse
thestrangebrew said:
Holy smokes. I extracted it. ok i'll move the zip to storage. Thanks!
Click to expand...
Click to collapse
It happens, Now you should be able to flash, Any Flashable roms you never need to extract them just flash

Success!! I've been de-virginized! Thanks for you help guys!!

Sound drivers problem

Okay, now i have three cases with my phone when the phone boots up
1.Hello moto boot animation with sound
In this case my phone works fine (only for few minutes though )
2.Hello moto boot animation without sound
In this, i cant hear any audio from my phone speaker , have to put on my headphones even to answer a call
3.No hello moto animation
Now, its gone, i couldnt use any app related to sound, no music,no calls nothing related to sound, ive to reboot my phone until any of the first two cases to come.
Model:XT1643
Variant:India
Current Rom: nougat 7.0.0(hope ive flashed the perfect stock)
Note: Ive unlocked my bootloader, this problem appeared after some good 20 days
Things that i already did:
1.Factory reset
2.Flashed RR,CM and some other roms
3.Flashed vegito and other kernels
4.Relocked the bootloader
5.Flashed many stock roms
6.All primitives(safe mode,factory mode,clearing cache,wiping dalvik)
7.Saw the logs and found something like
/proc/asound/card---- state failed no such directory found
Now im on my stock rom with bootloader locked.Till yesterday i was in case 2 but phone switched off due to low batter and when i power it on now my phone is back to the worst case 3.
Please help me , i hope xda forums got many android experts and developers

From Case 1 and 2.
I have seen this similar problem (on old Nokia phone), on my phone that happened because of water damage, few drops of water went to jack and it started to show "connected headphone" so it stopped playing music through speaker but worked fine with earphones..
It's rainy season, can you confirm this?
About 3rd case,
it iss un-understandable, can you tell more about that?
Also you have filled half post with what you have done to solve this, i would suggest you to write condition of phone before this happened, what actually you did before this problem started ? This will help others to understand problem..
Edit: about error in log,
Are you still on unlocked bootloader ?
Can you tell, (use any root browser / file manager)
Is there anything in /proc/asound/ ?
In my phone 6 files and card folder (shortcut to msm8952*****) contains other 200+ files...

____Mdd said:
From Case 1 and 2.
I have seen this similar problem (on old Nokia phone), on my phone that happened because of water damage, few drops of water went to jack and it started to show "connected headphone" so it stopped playing music through speaker but worked fine with earphones..
It's rainy season, can you confirm this?
About 3rd case,
it iss un-understandable, can you tell more about that?
Also you have filled half post with what you have done to solve this, i would suggest you to write condition of phone before this happened, what actually you did before this problem started ? This will help others to understand problem..
Edit: about error in log,
Are you still on unlocked bootloader ?
Can you tell, (use any root browser / file manager)
Is there anything in /proc/asound/ ?
In my phone 6 files and card folder (shortcut to msm8952*****) contains other 200+ files...
Click to expand...
Click to collapse
3rd case i mean moto boot involves
big M moto logo and then hello world and then some animation with sound
in the 3rd case only Moto logo will be shown for some seconds and phone boots up
And yeah, i can confirm that my phone's never been wet
the problem started when i tried rooting my phone, i successfully unlocked the bootloader and flashed wrong supersu file(I was a noob in this stuff back then).ended up in boot loop,Flashed some stock rom available in the net and phone worked perfectly for some days before this problem begun.
Since i dont have root access, i guess i couldnt access /proc/asound/
and now i have a locked bootloader
thanks for your time on replying my post
Warm regards.

Can you try to re-unlock it ?
[It's DARK here, i will not check any threads now, but suggest you to check threads in Q&A section about re-unlocking bootloader after updating to latest firmware, i don't wish any buddy's phone gets damaged, so please check]
Then see /proc/asound/
I will provid one from mine xt1643 if yours is something wrong..
Another question: does this happen with custom ROM too ?

Yeah sure, I will reunlock the bootloader,
Do I have to root my phone or reunlocking is sufficient to see system files?
And one more question
In twrp recovery I found fix se Linux contexts
Can I do that? Safe to do ? Does it have any chance of solving my problem?
Im quite experienced in locking and unlocking bl
I'll do it tomorrow and post the result here.
And yeah same with custom Roms also

Facing the same problem too
https://forum.xda-developers.com/moto-g4-plus/help/audio-moto-g4-plus-completely-zero-sound-t3637714

Just unlocked boot loader and rooted so, these are the files in my /proc/asound directory .
So the card folder and the shortcut is missing..please send me

Karthik Veenam said:
7.Saw the logs and found something like
/proc/asound/card---- state failed no such directory found
Click to expand...
Click to collapse
As here log said, "card" folder is missing in asound folder (your SS)
Check my SS, i am little confused about sharing card folder, because there is shortcut folder msm8952***** that directs to same card folder.

____Mdd said:
As here log said, "card" folder is missing in asound folder (your SS)
Check my SS, i am little confused about sharing card folder, because there is shortcut folder msm8952***** that directs to same card folder.
Click to expand...
Click to collapse
Can you mail me the entire proc folder?

i have taken it with different methods,
1st: i took flashable zip of /proc/asound with "zipME" app,
here: https://drive.google.com/file/d/0BwXhUjfgNMqyVnhyME8yREc2TXc/view?usp=drivesdk
2nd: copied with file manager, you have to unzip and paste into /proc/asound/
Here: https://drive.google.com/file/d/0BwXhUjfgNMqyQjJfNFlvLTM0Y28/view?usp=drivesdk
PS: i have taken whole asound folder, i suggest you to 1st copy card folder only and see..

____Mdd said:
i have taken it with different methods,
1st: i took flashable zip of /proc/asound with "zipME" app,
here: https://drive.google.com/file/d/0BwXhUjfgNMqyVnhyME8yREc2TXc/view?usp=drivesdk
2nd: copied with file manager, you have to unzip and paste into /proc/asound/
Here: https://drive.google.com/file/d/0BwXhUjfgNMqyQjJfNFlvLTM0Y28/view?usp=drivesdk
PS: i have taken whole asound folder, i suggest you to 1st copy card folder only and see..
Click to expand...
Click to collapse
Can you suggest me a good root browser for doing the copy paste operations? Everything sucks in my phone.
And thanks a ton

____Mdd said:
i have taken it with different methods,
1st: i took flashable zip of /proc/asound with "zipME" app,
here: https://drive.google.com/file/d/0BwXhUjfgNMqyVnhyME8yREc2TXc/view?usp=drivesdk
2nd: copied with file manager, you have to unzip and paste into /proc/asound/
Here: https://drive.google.com/file/d/0BwXhUjfgNMqyQjJfNFlvLTM0Y28/view?usp=drivesdk
PS: i have taken whole asound folder, i suggest you to 1st copy card folder only and see..
Click to expand...
Click to collapse
Bro none of the root browser can paste successfully.
So the other choice is flashing the zip directly in twrp ryt?

Karthik Veenam said:
Can you suggest me a good root browser for doing the copy paste operations? Everything sucks in my phone.
And thanks a ton
Click to expand...
Click to collapse
I am using X-Plore since symbian.. LoL. It provides good facilities, but for new user it may be confusing as it has dual pane view and stuff..
But i have seen most of users prefer ES file explorer and solid explorer... You can try them, and see what makes your work easy..

____Mdd said:
i have taken it with different methods,
1st: i took flashable zip of /proc/asound with "zipME" app,
here: https://drive.google.com/file/d/0BwXhUjfgNMqyVnhyME8yREc2TXc/view?usp=drivesdk
2nd: copied with file manager, you have to unzip and paste into /proc/asound/
Here: https://drive.google.com/file/d/0BwXhUjfgNMqyQjJfNFlvLTM0Y28/view?usp=drivesdk
PS: i have taken whole asound folder, i suggest you to 1st copy card folder only and see..
Click to expand...
Click to collapse
Not enough space in directory(root) so do u advice me to flash in twrp?

Karthik Veenam said:
Not enough space in directory(root) so do u advice me to flash in twrp?
Click to expand...
Click to collapse
Try and report..

I flashed but nothing happened and the files were not added I'm the directory..the directory still remains the same
Are you sure u gave the correct directory to the flashable zip?

Karthik Veenam said:
I flashed but nothing happened and the files were not added I'm the directory..the directory still remains the same
Are you sure u gave the correct directory to the flashable zip?
Click to expand...
Click to collapse
Yes those were taken form correct directory, but surprisingly those are getting overwriten at some time events, i just restarted my device and you can see it's date/time is close to clock (ss attached)... It's something issue with your device that it's not getting written..

Yeah, but copy pasting the missing folder will atleast work as a temp fix,
Can't I do anything to do that? I mean copy paste in the directory
And yeah even my 6 files are modifying with time, but those folder and shortcut is missing

It's full of surprise, can you check that with xplore (available on playstore)
TWRP is also not showing those folder but x-plore does..

____Mdd said:
It's full of surprise, can you check that with xplore (available on playstore)
TWRP is also not showing those folder but x-plore does..
Click to expand...
Click to collapse
It gives me the error " some files couldn't be copied"

B32 SD Update Error: can't be copied because it is too large for the volume's format?

Hey everyone,
I'm trying to comply update to my device using the B32 firmware downloaded on ZTE USA Support site. The file is large, too large for FAT32, at 5.39GB.
I have tried copying it using android transfer on my mac, ejecting the microSD and using a regular SD adapter and copying it that way, and I have also tried just downloading right from the Software Update screen. The first two methods errored with (https://ibb.co/kjh4yG).
The software update fails with a message explaining that the firmware found and downloaded by the phone does not match the device...?
I have been on the old firmware for what feels like a year now. I'm hoping you all can shed some light on this.
Thanks

macboss said:
Hey everyone,
I'm trying to comply update to my device using the B32 firmware downloaded on ZTE USA Support site. The file is large, too large for FAT32, at 5.39GB.
I have tried copying it using android transfer on my mac, ejecting the microSD and using a regular SD adapter and copying it that way, and I have also tried just downloading right from the Software Update screen. The first two methods errored with (https://ibb.co/kjh4yG).
The software update fails with a message explaining that the firmware found and downloaded by the phone does not match the device...?
I have been on the old firmware for what feels like a year now. I'm hoping you all can shed some light on this.
Thanks
Click to expand...
Click to collapse
You have two ways to do this:
-If your internet is decent enough just forget about the SD card and download the update on your phone. Afterwards, download 'RAR' from the play store, find the downloaded file (in Downloads), and open the zip file. If you find a PDF and a file called 'update.zip' inside, simply select it and unzip it to the root of your sd card (put '/storage/emulated/0/ on the Destination path). So you will have an 'update.zip' file there. You don't need to unzip this one. Now go to Settings, Updates, then let it scan and it should find the file, update and voila
-Format your SD Card to exfat and pop the file right in
It's weird that the update file is that huge, since usually files for the A2017G are around 2.1 gigs

It worked my friend!!!
I installed RAR, then went inside the downloaded file, found update.zip and unzipped it to '/storage/emulated/0. Did not find any PDF file though, not sure what that would have been for..? Anyway, saw the MiFavor firmware update screen which meant we were on our way to finish line. After that it booted to a small tiny linux penguin symbol and black background. Tried rebooting by holding down the power button. Rebooted. Saw penguin again for like 5 seconds, then booted straight to the axon wavy weird startup sequence. I DID IT!! I really appreciate the help on this one. Great idea. And it worked flawlessly.
Thank you. Choose an username.. Your username might be strange but your solutions are a lifesaver.
Cheers!

macboss said:
It worked my friend!!!
I installed RAR, then went inside the downloaded file, found update.zip and unzipped it to '/storage/emulated/0. Did not find any PDF file though, not sure what that would have been for..? Anyway, saw the MiFavor firmware update screen which meant we were on our way to finish line. After that it booted to a small tiny linux penguin symbol and black background. Tried rebooting by holding down the power button. Rebooted. Saw penguin again for like 5 seconds, then booted straight to the axon wavy weird startup sequence. I DID IT!! I really appreciate the help on this one. Great idea. And it worked flawlessly.
Thank you. Choose an username.. Your username might be strange but your solutions are a lifesaver.
Cheers!
Click to expand...
Click to collapse
Lol. The signup dialog said 'Choose an username...', so i said, why not?
I think you downloaded directly the update.zip. Maybe the RAR part wasn't needed, I dunno. If there's a folder somewhere there called 'update' then just delete it, and the update.zip too

A larger than 5Gb update would have to be the file fully unzipped into a folder structure.
Update files are zipped and that's what the phone wants.

Choose an username... said:
Lol. The signup dialog said 'Choose an username...', so i said, why not?
I think you downloaded directly the update.zip. Maybe the RAR part wasn't needed, I dunno. If there's a folder somewhere there called 'update' then just delete it, and the update.zip too
Click to expand...
Click to collapse
I downloaded one of the two raw zips from the ZTE USA site that had a very long name.zip with all numbers. The "update.zip" was nestled inside after unzipping the file on the phone. I just picked that file and moved it to ther root and applied the update. It went through successfully. Did i not apply it correctly? Should i have just renamed that whole file to "update.zip" and moved the entire folder? A little confused. But i imagine if the update took and i saw the 32 in the current build of the device it took. But im not sure.

macboss said:
I downloaded one of the two raw zips from the ZTE USA site that had a very long name.zip with all numbers. The "update.zip" was nestled inside after unzipping the file on the phone. I just picked that file and moved it to ther root and applied the update. It went through successfully. Did i not apply it correctly? Should i have just renamed that whole file to "update.zip" and moved the entire folder? A little confused. But i imagine if the update took and i saw the 32 in the current build of the device it took. But im not sure.
Click to expand...
Click to collapse
Nah that's okay. I thought you downloaded the 'update.zip' directly. Happens sometimes

It’s weird the update was only about 2 GB. What do you think was the rest of the file?

Maybe in case it needed the full firmware. In this case it didn’t probably. Just a guess

macboss said:
Maybe in case it needed the full firmware. In this case it didn’t probably. Just a guess
Click to expand...
Click to collapse
No, that doesn't make sense. No idea really.
It couldn't have gone wrong so don't stress out. Your phone works. If it didn't work then yeah, something was wrong...