Ok on a non rooted T-Mobile N1
followed instructions
flashed froyo from SD card, phone boots
after a while the animated N1 logo froze
gave it some time
pulled battery, nothing was happening ( I know probably my first error)
reflashed the update, crashed again
went back into recovery, did a factory reset, never went past static N1 logo
tried flashing update again, so far still stuck on the static logo
What am I doing wrong here????
At the bare minimum what can I do to go back to original?
Realized another thing, had the USB cord connected when it won't get past the static log
Re flashed the update without the cord connected, it is now again going through the animated boot up
Hope this does it
*edit* Nope, animated boot up stopped again, going to let it go for a while
Still can't get this phone to boot
Anyone have a link to flash back to 2.1 update1????
have you tried another image like Cyanogen 5.0.6 or sometihing else ?
I'm not rooted
Trying to do this without rooting for now, will consider rooting if I can't somehow flash back to stock Update1
At this point what I think I'm going to do is reflash to 2.1
Does anyone have a link to 2.1 for download?
Or what would be the best way to go back to 2.1 on a non rooted phone?
After flashing Paul's froyo update, mine was stuck at the animated X logo for about 5-7 minutes for the first time, so maybe you also should try waiting at that animation.
garvkapur said:
After flashing Paul's froyo update, mine was stuck at the animated X logo for about 5-7 minutes for the first time, so maybe you also should try waiting at that animation.
Click to expand...
Click to collapse
Waited close to 10 before getting worried, will try again later tonight, stuck at work ><
not sure on ur exact steps but heres this for non rooters. Im rooted. Hope this helps.
http://androidforums.com/nexus-one/83231-how-manually-update-nexus-one-android-2-2-froyo-root.html
Buck Shot said:
not sure on ur exact steps but heres this for non rooters. Im rooted. Hope this helps.
http://androidforums.com/nexus-one/83231-how-manually-update-nexus-one-android-2-2-froyo-root.html
Click to expand...
Click to collapse
Didn't follow those steps, will try those exact ones as soon as I get home
Gonna be a long day at work now
Nope still can't boot this phone
Need a download link for 2.1 Update1 so I can roll back and wait for the official release
Anyone have a link??????
Related
Deleted by user
I suggest you to completely charge your phone for half a day and then try to power it on. It should at least get stuck in the M logo.
Sent from my MB525 using XDA App
Mine has done the same thing, i left it connected to rsd lite to flash, went to bed, and now its stuck at a black screen and won't boot up at all. Same white light when plugged in to the pc, but rsd doesn't recognize. please help.
Was your battery low when you tried flashing? It will not charge in bootloader mode so if you're battery is low you will have issues. If you boot with volume up pressed does it give you a message?
Try the Mcgyver battery fix found in this forum.
skateguitar00 said:
Mine has done the same thing, i left it connected to rsd lite to flash, went to bed, and now its stuck at a black screen and won't boot up at all. Same white light when plugged in to the pc, but rsd doesn't recognize. please help.
Click to expand...
Click to collapse
Deleted by user
I had that problem while trying the "Flash FroYo without losing downgradeability" solution: SBF Problem
After downloading, flashing every other available official ROM, and failing with each one, and seeing that no other SBF fro T-Mo exists anywhere, I bit the bullet and flashed the T-Mo signed FroYo ROM. And it worked!
So now I may have screwed myself over by flashing the leaked ROM but hey, it works well and is fast. Plus, it's FroYo so I now have A2SD and built-in Tethering...
gookia2000 said:
Hi all, I am a proud owner of a t-mobile defy (for about 2 months now!) and my hands got itchy today and went ahead to "debrand" it following the guide by Higgsy.
I was trying to flash a uk 2.21 rom onto my t-mobile defy (rooted with z4root).
Well, I managed to do all the steps of the guide. my phone was recognised by rsdlite, i selected the uk 2.21 sbf file, i clicked start, and it started flashing the different code groups. Finally, it said "finished" and "PASS". Here is when the problem started. The phone did not reboot into android. It was just a blank screen with a white light on the top (where the green led is to inform you about new messages.)
i panicked and disconnected the phone (the white light turns off after disconnecting), took out the battery, tried rebooting, tried rebooting into recovery (power + vol down), tried rebooting into bootloader (power + vol up). Nothing worked. it just stayed dead.
I then plugged it back into the computer. immediately the white light came back on and rsdlite recognised my phone. i tried flashing again - same result. I then tried flashing the 2.52 uk rom - same result.
even more panicky now, i unplugged everything and decided to take a nap and hopefully think of some ingenious solution to the problem. now, after a 3 hour rest, i tried plugging the phone back into the computer. the white light comes on, but now rsdlite doesnt even recognise the phone.
In essence, is my phone bricked? I cannot:
1) load into recovery to do a nandroid restore (yes, i have a nandroid backup copy)
2) load sbf files from rsdlite. every sbf file i tried doesnt seem to work. now its worse as rsdlite doesnt even recognise my phone.
i have even tried doing a nandroid restore via adb. but i get the error message that no phone was detected in the command prompt. perhaps its because the phone was not started in recovery mode.
The only explanation i can think of is that i have recently updated to the t-mobile 3.6.360 update and that might be the reason why so many people before me were able to flash their defy's roms successfully while i got stuck.
Can anyone please help? I LOVED my defy more than any other phone, and 2 months was too shortlived!
Click to expand...
Click to collapse
skateguitar00 said:
Mine has done the same thing, i left it connected to rsd lite to flash, went to bed, and now its stuck at a black screen and won't boot up at all. Same white light when plugged in to the pc, but rsd doesn't recognize. please help.
Click to expand...
Click to collapse
Deleted by user
Actually, all you have to do is press the power button while the LED is on and RSDLite is running. You will hear the USB detection sound and your phone will appear on the list. It won't appear as it normally would but it will be listed.
Then just choose the Froyo ROM and then click start to flash it. It'll take less than 10 minutes...
There's no other way that I know of to get it working. Even in the link that I posted, you can check and see that no one even bothered to give me an idea of what to do. I had to figure this out myself.
I figured it was the bootloader protection that was causing the problem so the logical choice was to flash the only T-Mo ROM available which happens to be the leaked Froyo.
It's been almost 24 hours and I've had no problems with FroYo so as far as I'm concerned, I'm good.
gookia2000 said:
Beach Head, thanks for your reply. you have provided me with a glimmer of hope!!! the leaked tmobile froyo sbf is one i have not tried. I will certainly try to flash my defy with that once i have gotten it recognised by rsdlite.
I believe my phone is currently not being recognised by rsdlite due to insufficient battery. (cant confirm this, as all i see when i plug in the usb is a white light on my phone. but ever since i started this entire nightmare, i think i have attempted flashing at least 5 different sbf files and considerable battery has been drained.) I will try the Mcgyver battery fix next.
skateguitar, THERE IS HOPE!!! i havent confirmed it yet but i think we all got stuck cos we were trying to flash from a "non-downgradeable" 3.6.360 firmware. and rsdlite does not recognise our phones due to low battery (your phone was left with a white light on after flashing for 1 whole night.) SO... i propose this course of action: 1) perform the Mcgyver battery fix and try to get our phones recognised by rsdlite first. 2) once recognised, flash with the leaked tmobile froyo sbf.
Does anyone have any better suggestions before i plunge head first to save my phone?
Click to expand...
Click to collapse
Yes all i wanted to say was that you might have lost your downgradability and thats why phone does not boot. Simple thing is to flash the original sbf like what beachhead suggested. It definitely should work.
Sent from my MB525 using XDA App
Guess what, it works!!!
Deleted by user
Glad I could help you out!
Enjoy Froyo!
gookia2000 said:
OHMYGOODNESS!!! I LOVE YOU GUYS!!!
My Defy has been flashed with the t-mobile froyo leaked rom and IT WORKS!!! I was so mentally set with the idea that my defy has been bricked and I just threw $400 down the drain... NOW I AM SO HAPPY!!!
Anyway, just for your information, here is what I did:
- I first tried to get my defy recognised by rsdlite. I tried Beach Head's suggestion of pressing the power button while the led is on to no effect. I reckon that the battery has just been drained too low. So, i went ahead with the McGuyver battery fix.
- Alas, with the wires protruding precariously from my phone, rsdlite finally recognised my phone. I went to load the leaked t-mobile froyo rom and went ahead flashing it.
- And, guess what, IT WORKS!!!
Thank you all so much, especially beach head, for your help in this forum! I would have gone to the mobile store to get another phone if not for you guys!!!
Click to expand...
Click to collapse
I have the same problem, and will probably end up trying to flash the leaked Tmobile Rom.
Can you point me to where you downloaded this file? I think I found the thread, but I want to be sure
Deleted by user
got it! Thanks!
Now to ultimately decide if I want to flash this, since it's non-downgradeable
To update, flashing this rom has fixed my phone. Yay! Thanks!
I wonder if it was the 3.66x update that Moto pushed out - this phone was brand new, bought in Dec 2010, no other hacking done on it...
Beach_Head said:
I had that problem while trying the "Flash FroYo without losing downgradeability" solution: SBF Problem
After downloading, flashing every other available official ROM, and failing with each one, and seeing that no other SBF fro T-Mo exists anywhere, I bit the bullet and flashed the T-Mo signed FroYo ROM. And it worked!
So now I may have screwed myself over by flashing the leaked ROM but hey, it works well and is fast. Plus, it's FroYo so I now have A2SD and built-in Tethering...
Click to expand...
Click to collapse
How did you get it to show up in rsd
I'm not working on my phone because i think i messed it up enough, so i took it to a store that fixes phones. The guy told me that he had my battery on a universal charger and he still cant get rsd lite to recognize it... What can i do
Another Happy Defy User
Just to confirm, I was seeing the same thing gookia2000 was seeing. Here was my resolution in case it helps anyone:
I was able to get mine working by flashing the US Stock Froyo build as explained in this thread: http://forum.xda-developers.com/showthread.php?t=938708&highlight=bricked&page=2
I found this thread to be super helpful as it helped me confirm my suspicion that the battery being low was the issue: http://forum.xda-developers.com/wik...#Recover_Nearly_Bricked_Phone_.28hopefully.29
Thankfully my wife has the same phone so I borrowed her battery, otherwise I would have been going McGyver style per Sorensiim (da' man) as seen here:
http://forum.xda-developers.com/showthread.php?t=892026
So happy this nightmare is over - running Froyo is a little bonus love!
Thanks to all @ XDA!!!
-Dave
Defy wont come on get a white light!
im having the same prob i did the the steps but its not working is there anything else i can do or is there a video of the proceeder
I have the same issue with a Telstra defy. I can get RSD to recognise something is connected but it isnt listed as MB525 like before but as "S Flash OMAP3630" I have flashed various SBF files but nothing is changing.
Hello All,
I have run into a problem with my Heroc not wanting to boot. Some background:
ROM: CM7
Kernal: Jaybob's recent Kernal
Mods: Firerats
All was fine and dandy until yesterday, when I decided to reboot the phone (with a full battery charge). The phone shutoff and when restarted was stuck at the HTC screen. I've tried several times to get into recovery but it hangs at the HTC Screen.
I can enter Fastboot/Hboot. I did some digging and tried to unroot by using this method: http://forum.xda-developers.com/showthread.php?t=988741
Method 1, loading the imaging on the sd root and loading. Everything loaded fine but when I reboot it still hangs at the HTC screen. I have not tried to RUU being that I am on a Mac and don't have access to a PC at the moment. So RUU will be done later tonight hopefully, but I don't expect different results.
It seems like I have some messed up memory and its not allowing me to boot. Does anyone know of a fix? I'm not desperate because its time for an upgrade. I just wanted to hold off on using it until January when Sprint holds their press conference, assuming its an Android device. I'd like to see what I could get versus the phones on the market now.
Any help is appreciated, thanks in advance
srkmagnus said:
Hello All,
I have run into a problem with my Heroc not wanting to boot. Some background:
ROM: CM7
Kernal: Jaybob's recent Kernal
Mods: Firerats
All was fine and dandy until yesterday, when I decided to reboot the phone (with a full battery charge). The phone shutoff and when restarted was stuck at the HTC screen. I've tried several times to get into recovery but it hangs at the HTC Screen.
I can enter Fastboot/Hboot. I did some digging and tried to unroot by using this method: http://forum.xda-developers.com/showthread.php?t=988741
Method 1, loading the imaging on the sd root and loading. Everything loaded fine but when I reboot it still hangs at the HTC screen. I have not tried to RUU being that I am on a Mac and don't have access to a PC at the moment. So RUU will be done later tonight hopefully, but I don't expect different results.
It seems like I have some messed up memory and its not allowing me to boot. Does anyone know of a fix? I'm not desperate because its time for an upgrade. I just wanted to hold off on using it until January when Sprint holds their press conference, assuming its an Android device. I'd like to see what I could get versus the phones on the market now.
Any help is appreciated, thanks in advance
Click to expand...
Click to collapse
You definitely need to do an RUU. No way around it. know it sucks starting fresh again but it'll solve all these problems you have. If your s-off you can also do the RUU from Hboot but it's better to do it from PC as I have learned. Good luck man.
thanks a lot! om going to give it a try later tonight when i have access to a pc. Im not so much worried about starting fresh than I am losing the phone and using my upgrade now... I have a curve laying around and started to thing about using that for a while until I see something I like.
i will report back tonight or tomorrow when i am up and running again.
I had the same problem awhile back and it took me forever to get it fixed but I finally got it fixed. Search the forum for " stuck at HTC screen and look for the threads I started for as possible fix. I will try to find it and post the link here.
http://forum.xda-developers.com/showthread.php?t=1305479&page=3
My last post describes how I finally fixed my Hero, but you should read the whole thread.
williams1978 said:
I had the same problem awhile back and it took me forever to get it fixed but I finally got it fixed. Search the forum for " stuck at HTC screen and look for the threads I started for as possible fix. I will try to find it and post the link here.
http://forum.xda-developers.com/showthread.php?t=1305479&page=3
My last post describes how I finally fixed my Hero, but you should read the whole thread.
Click to expand...
Click to collapse
Thanks. I will give it a look.
I read through the thread and it looks like you passed the black htc screen and got to the white one. I can't get passed the black and adb doesn't pick up the phone at this point. I'm still waiting to try the RUU and see if HTC sync picks up the device.
Very resourceful thread and I'll be sure to give all the suggestions a try before giving up.
HTC sync won't pick up the device and I don't think any other option will work since I don't have ADB access. I'm just gonna bite the bullet and look into a replacement.
Ok to verify your phone does boot at least to the bootloader? If so I have a doffeemr approach for you to take
私のEVO 3Dから送信される。
dastin1015 said:
Ok to verify your phone does boot at least to the bootloader? If so I have a doffeemr approach for you to take
私のEVO 3Dから送信される。
Click to expand...
Click to collapse
yeah. I can get into bootloader and fastboot. whatcha got?
I have a new phone on the way. Amazon has ET4G for $79, too good to pass up so I used my upgrade. Ill still be curious to know how I can get the Hero up and running.
srkmagnus said:
yeah. I can get into bootloader and fastboot. whatcha got?
I have a new phone on the way. Amazon has ET4G for $79, too good to pass up so I used my upgrade. Ill still be curious to know how I can get the Hero up and running.
Click to expand...
Click to collapse
Follow these instructions: http://forum.xda-developers.com/showthread.php?t=804692
I used a flashable RUU based off Flipz source and still no luck. I will give your RUU a try later tonight... Thanks
No luck. The phone freezes at the HTC screen and fails to go any further. :-(
srkmagnus said:
No luck. The phone freezes at the HTC screen and fails to go any further. :-(
Click to expand...
Click to collapse
i had same kinda deal from a bad radio flash
if you still have fastboot do
"fastboot erase system -w"
"fastboot oem boot heroc.hboot-1.46.2000.zip"
you may need to rename the file to HBOOT.
if that dose not work unzip the file take the hboot img and place on sdcard and place where your fastboot files are like in android/platform-tools.
this made a deference for me.
then try fastboot flash img hboot.img
this is what i went through here
http://forum.xda-developers.com/showthread.php?t=1086125
good luck if i can help let me know.
Thanks for the help oostah. I haven't been able to get ADB to recognize the device. When I get home I'll try it again and remove the hboot as suggested and give that a try.
Now that ICS is in beta for the Heroc my phone decides to crap out on me and I can't enjoy the hard work put in by the developers. Nonetheless, I am much appreciative of all the support put into the Heroc and have learned a lot from this community
I'll report back tonight with my results.
srkmagnus said:
Thanks for the help oostah. I haven't been able to get ADB to recognize the device. When I get home I'll try it again and remove the hboot as suggested and give that a try.
Now that ICS is in beta for the Heroc my phone decides to crap out on me and I can't enjoy the hard work put in by the developers. Nonetheless, I am much appreciative of all the support put into the Heroc and have learned a lot from this community
I'll report back tonight with my results.
Click to expand...
Click to collapse
you are welcome i have been there before.
your phone may not recognize ADB but it may still take fastboot commands. that was one thing that drove me crazy is that i could fastboot but not adb. let us all know how it goes.
I did "fastboot-mac devices" and got my device to show up, so it registered. however, when I go to erase system I get an error, "remote: not allowed". The same occurred when trying to flash the .zip and img files separately as suggested . At one point the devices started vibrating like crazy and shut off, the led started to blink green. I did get it back into Fastboot, but now it won't turn on.
Thanks for the help though It was already replaced and the new phone should be here tomorrow. I'm just going to miss the Hero since it was my first Android device and I learned a lot in this forum.
Thanks!
srkmagnus said:
I did "fastboot-mac devices" and got my device to show up, so it registered. however, when I go to erase system I get an error, "remote: not allowed". The same occurred when trying to flash the .zip and img files separately as suggested . At one point the devices started vibrating like crazy and shut off, the led started to blink green. I did get it back into Fastboot, but now it won't turn on.
Thanks for the help though It was already replaced and the new phone should be here tomorrow. I'm just going to miss the Hero since it was my first Android device and I learned a lot in this forum.
Thanks!
Click to expand...
Click to collapse
i still have one of my hero's that i let people play with when the come over. it still runs off wifi so they can play games yous gtalk what ever be nice to get it up and running for experience and fun lol now that your not in a have to mode.
do you have a nan back up from a sd card any place like on your pc if so look for your clockworkmod folder look for backups and you should see your backups open one of them you will see
boot
system
data
recovery
sd-ext
cache
they will be img files you can place them on your sd card and fastboot them back to the phone
"fastboot flash img boot.img"
"fastboot flash img system.img"
and so on
or
"fastboot boot img boot.img"
"fastboot boot img system.img"
and so on
or you can let it RIP
good to know. I'll give that a try if I can get it booted. I'm thinking its dead and needs a charge to get back into fastboot. I'd love to get it back up and running as a learning experience more than anything. I wont have time until tomorrow or Thursday . I will report back when I give it a try.
srkmagnus said:
good to know. I'll give that a try if I can get it booted. I'm thinking its dead and needs a charge to get back into fastboot. I'd love to get it back up and running as a learning experience more than anything. I wont have time until tomorrow or Thursday . I will report back when I give it a try.
Click to expand...
Click to collapse
will the charge light come on when plugged in if not there is a trick take a old usb cable cut one end off on the battery there are
= and - becare full connect the red wire to + and black to - tap them down so they dont move. let it set for 2 1/2 hrs should be good to go.
Hey guys let me start by saying I have done quite a bit of searching and im not a total noob when it comes to this stuff. I have still been unable to find an answer to my questions...
So basically I have a Droid 2 and I flashed the CM9 ICS Alpha onto it had it running great (Cant wait to get past alpha ) But due to the fact that its an alpha and really nothing works I wanted to go back to my librity rom... I tried to boot into recovery and that caused a boot loop instead of booting into recovery.
So from there I went to flash the stock SBF onto the phone and it keeps just getting stuck in a boot loop even when flashing the stock SBF. What have I done! lol How do I get this thing back to a factory setup?
I would really like to figure this out but if I cant I will be putting another mobo in it as that may be the easier solution haha
Thanks for taking the time to help me with this and if you know somewhere this has already been discussed please direct me to it as I could not find it...
Nevermind lol
I was able to get it to boot by booting into recovery and running the factory reset. But I had already tried that once before posting this and it had not worked...
Well anyway all is good for me now maybe this will help someone eventually have a great day.
This evening I received my 4.4 ota only for it to get stuck on the opening animation. After reading other peoples issues here I put it in recovery and wiped cache. Still stuck on animation. I then did a factory reset and still stuck on animation. What is my next option?
lennyboi77 said:
This evening I received my 4.4 ota only for it to get stuck on the opening animation. After reading other peoples issues here I put it in recovery and wiped cache. Still stuck on animation. I then did a factory reset and still stuck on animation. What is my next option?
Click to expand...
Click to collapse
Use the first guide in my signature if your device is bootloader locked, or the others if unlocked.
lennyboi77 said:
This evening I received my 4.4 ota only for it to get stuck on the opening animation. After reading other peoples issues here I put it in recovery and wiped cache. Still stuck on animation. I then did a factory reset and still stuck on animation. What is my next option?
Click to expand...
Click to collapse
I had that happen tonight as well. I used Mr. Skip's toolkit to side load stock 4.3 back and then the OTA pushed again and it went OK.
He already did a factory reset which wipe out the entire device, there is no point of going back 4.3 to get the OTA. Flash directly the 4.4 factory image.
Thanks for your replies, I have not much experience in this and your guide as detailed as it is doesn't make much sense to someone like me with limited knowledge in this area. Is there a basic guide someone could direct me to please? I really need my phone back!
lennyboi77 said:
Thanks for your replies, I have not much experience in this and your guide as detailed as it is doesn't make much sense to someone like me with limited knowledge in this area. Is there a basic guide someone could direct me to please? I really need my phone back!
Click to expand...
Click to collapse
Search youtube for video guides:http://www.youtube.com/results?search_query=how+to+flash+factory+image+nexus+4&sm=3.
This guide might be easier to understand as well: http://forums.androidcentral.com/ne...3923-guide-nexus-4-factory-image-restore.html
I followed one of the videos on youtube to use Skips Toolkit(?) to get my phone back on with 4.4 installed. I installed drivers as stated and it seemed like everything was going ok, then the update failed and now pc won't recognise phone/usb so I'm a bit stuck now. Does anyone have any tips of my next move I'm starting to panic now. Thanks for the help so far
Can anyone help with my problem please?
lennyboi77 said:
I followed one of the videos on youtube to use Skips Toolkit(?) to get my phone back on with 4.4 installed. I installed drivers as stated and it seemed like everything was going ok, then the update failed and now pc won't recognise phone/usb so I'm a bit stuck now. Does anyone have any tips of my next move I'm starting to panic now. Thanks for the help so far
Click to expand...
Click to collapse
Go back and reload 4.4 with Mr. Skip's toolkit again. It should be able to see the phone even if the PC doesn't.
Thanks for reply. I have tried it doesn't seem to recognise my phone, it did first time though. I'm beginning to tear my hair out now
"device mode cannot be detected"
hey all,
Saturday morning a wake up to my alarm on my phone (SM-G950U T-Mobile Stock since new) and turn off the alarm and proceed to check email and scroll social medias. A few minuted later phone turns off and starts boot looping. Occasionally it would boot to home screen and i could unlock it but then maybe 30 seconds later it would start boot loping again. Now it either just boot loops or boots straight to recovery . I have tried flashing current firmware in case it was corrupted and i have tried accessing it through ADB. I know for a fact USB debugging is on because I just used abd to pull wifi passwords 2 weeks ago, but when I try to [ abd devices] if comes up as unauthorized and I cannot proceed. I know everyone will suggest a factory reset, but I am hoping someone has a trick for extracting files. I dont care about most on my phone, but I would like to save the pics from my GF and I trip this past august. Apparently I didnt have my photo library set to sync to cloud -_-
thanks
-chip
update: it appears there is a pattern. it boot loops or boots to recovery (after a blue failed system update screen) 99% of the time. the 1% it boot fully and then crashes is only when battery is 0% . it for some reason is only trickle charging and isnt getting enough juice when it does boot fully to stay on . But if i leave it charging a while it will then only boot loop or boot to recovery. Strange...any way I had enough time this past boot to reauthorize usb debug.....wish me luck with adb
....nevermind. still shows up as unauthorized
chip102 said:
hey all,
Saturday morning a wake up to my alarm on my phone (SM-G950U T-Mobile Stock since new) and turn off the alarm and proceed to check email and scroll social medias. A few minuted later phone turns off and starts boot looping. Occasionally it would boot to home screen and i could unlock it but then maybe 30 seconds later it would start boot loping again. Now it either just boot loops or boots straight to recovery . I have tried flashing current firmware in case it was corrupted and i have tried accessing it through ADB. I know for a fact USB debugging is on because I just used abd to pull wifi passwords 2 weeks ago, but when I try to [ abd devices] if comes up as unauthorized and I cannot proceed. I know everyone will suggest a factory reset, but I am hoping someone has a trick for extracting files. I dont care about most on my phone, but I would like to save the pics from my GF and I trip this past august. Apparently I didnt have my photo library set to sync to cloud -_-
thanks
-chip
update: it appears there is a pattern. it boot loops or boots to recovery (after a blue failed system update screen) 99% of the time. the 1% it boot fully and then crashes is only when battery is 0% . it for some reason is only trickle charging and isnt getting enough juice when it does boot fully to stay on . But if i leave it charging a while it will then only boot loop or boot to recovery. Strange...any way I had enough time this past boot to reauthorize usb debug.....wish me luck with adb
....nevermind. still shows up as unauthorized
Click to expand...
Click to collapse
Ive had similar cases happen with older models. May be time for a battery. They will do crazy **** when the battery crashes. When you flashed stock firmware you lost adb authorisation. Need to get the system back first for that.
TheMadScientist said:
Ive had similar cases happen with older models. May be time for a battery. They will do crazy **** when the battery crashes. When you flashed stock firmware you lost adb authorisation. Need to get the system back first for that.
Click to expand...
Click to collapse
thank you very much. my battery life was greatly suffering and the USB-c port was worn pretty bad. Ill grab a new battery and hope that works.
chip102 said:
thank you very much. my battery life was greatly suffering and the USB-c port was worn pretty bad. Ill grab a new battery and hope that works.
Click to expand...
Click to collapse
Cheapest fix in my opinion. I saw another thread a guy dropped his. Now detects 9008 how to fix. More than likely a phone wont just not boot. Or lose programming unless a hardware issue. So if it was just running and quit. Not modding stuff really. More likely than not its gonna be some form of software. But hardware.
TheMadScientist said:
Cheapest fix in my opinion. I saw another thread a guy dropped his. Now detects 9008 how to fix. More than likely a phone wont just not boot. Or lose programming unless a hardware issue. So if it was just running and quit. Not modding stuff really. More likely than not its gonna be some form of software. But hardware.
Click to expand...
Click to collapse
Replaced Daughter board and battery. No improvement :/ bummer
the only time i can get it back into recovery is after a "successful" flash with odin. by successful i mean that it says it worked but it just continues to boot loop or boots to recovery. attached is a picture of the info i get in recovery every time. hope someone can shed some light in the issue. im using my old phone so i dont feel pressured to call the data a loss and try a factory reset just yet....my old phone is a POS though
chip102 said:
the only time i can get it back into recovery is after a "successful" flash with odin. by successful i mean that it says it worked but it just continues to boot loop or boots to recovery. attached is a picture of the info i get in recovery every time. hope someone can shed some light in the issue. im using my old phone so i dont feel pressured to call the data a loss and try a factory reset just yet....my old phone is a POS though
Click to expand...
Click to collapse
Yea some one tried to root it using the edl safestrap thread. Only wsy to fix it is filled the steps and reflash jrkruses pie rom. One of my mother boards are in the same state. That's the only way dm verity fails. Is his rom method.
There's some easy to flash a cache wipe in Odin but I hadn't found it yet. I have 2 mother boards and one is identical. I flash this stock and lose download or recovery. but the errors you show are only from doing that edl safestrap
Ill be honest..i have no idea what you are talking about. Ive messed with the software with previous devices and never heard of safe strap. This one has been bone stock since I got it from Tmobile and i haven't attempt to flash anything until i had this issue. never tried to root it
TheMadScientist said:
Yea some one tried to root it using the edl safestrap thread. Only wsy to fix it is filled the steps and reflash jrkruses pie rom. One of my mother boards are in the same state. That's the only way dm verity fails. Is his rom method.
There's some easy to flash a cache wipe in Odin but I hadn't found it yet. I have 2 mother boards and one is identical. I flash this stock and lose download or recovery. but the errors you show are only from doing that edl safestrap
Click to expand...
Click to collapse
chip102 said:
Ill be honest..i have no idea what you are talking about. Ive messed with the software with previous devices and never heard of safe strap. This one has been bone stock since I got it from Tmobile and i haven't attempt to flash anything until i had this issue. never tried to root it
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-s8/development/root-t3904613. This thread can help you at least get pie back up and running. I wouldn't mess with no more. I haven't had much luck with mine. But I did get it booting again