This evening I received my 4.4 ota only for it to get stuck on the opening animation. After reading other peoples issues here I put it in recovery and wiped cache. Still stuck on animation. I then did a factory reset and still stuck on animation. What is my next option?
lennyboi77 said:
This evening I received my 4.4 ota only for it to get stuck on the opening animation. After reading other peoples issues here I put it in recovery and wiped cache. Still stuck on animation. I then did a factory reset and still stuck on animation. What is my next option?
Click to expand...
Click to collapse
Use the first guide in my signature if your device is bootloader locked, or the others if unlocked.
lennyboi77 said:
This evening I received my 4.4 ota only for it to get stuck on the opening animation. After reading other peoples issues here I put it in recovery and wiped cache. Still stuck on animation. I then did a factory reset and still stuck on animation. What is my next option?
Click to expand...
Click to collapse
I had that happen tonight as well. I used Mr. Skip's toolkit to side load stock 4.3 back and then the OTA pushed again and it went OK.
He already did a factory reset which wipe out the entire device, there is no point of going back 4.3 to get the OTA. Flash directly the 4.4 factory image.
Thanks for your replies, I have not much experience in this and your guide as detailed as it is doesn't make much sense to someone like me with limited knowledge in this area. Is there a basic guide someone could direct me to please? I really need my phone back!
lennyboi77 said:
Thanks for your replies, I have not much experience in this and your guide as detailed as it is doesn't make much sense to someone like me with limited knowledge in this area. Is there a basic guide someone could direct me to please? I really need my phone back!
Click to expand...
Click to collapse
Search youtube for video guides:http://www.youtube.com/results?search_query=how+to+flash+factory+image+nexus+4&sm=3.
This guide might be easier to understand as well: http://forums.androidcentral.com/ne...3923-guide-nexus-4-factory-image-restore.html
I followed one of the videos on youtube to use Skips Toolkit(?) to get my phone back on with 4.4 installed. I installed drivers as stated and it seemed like everything was going ok, then the update failed and now pc won't recognise phone/usb so I'm a bit stuck now. Does anyone have any tips of my next move I'm starting to panic now. Thanks for the help so far
Can anyone help with my problem please?
lennyboi77 said:
I followed one of the videos on youtube to use Skips Toolkit(?) to get my phone back on with 4.4 installed. I installed drivers as stated and it seemed like everything was going ok, then the update failed and now pc won't recognise phone/usb so I'm a bit stuck now. Does anyone have any tips of my next move I'm starting to panic now. Thanks for the help so far
Click to expand...
Click to collapse
Go back and reload 4.4 with Mr. Skip's toolkit again. It should be able to see the phone even if the PC doesn't.
Thanks for reply. I have tried it doesn't seem to recognise my phone, it did first time though. I'm beginning to tear my hair out now
"device mode cannot be detected"
Related
EDIT: She's back. The problem is that there's many sets of instructions out there... some that I think are for not-so-bad bricks (if there's such a thing) and other (longer) instructions for bad-brick. LOL
Anyway, HUGE HUGE thanks to soundcolor over on AllDroid for his in depth instructions. The part that saves my a$$ were the parts that came after the rdlite run when the phone goes into boot loop again even after the reflash.
Link to his instructions here: http://alldroid.org/default.aspx?g=posts&t=762
Anyway, hope that helps other people who might get themselves into a similar situation!!
I could really use some help here.
I tried to install this: http://forum.xda-developers.com/showthread.php?t=749692
I was upgraded to 2.2 and before I installed it, there wasn't any post in the thread saying that you could install it on 2.2 (it said it was for 2.1... but lots of things are and still work on 2.2 so I didn't think it would be a major problem other than maybe not working).
Anyway, i followed the first step and pushed the framework file and it put my phone into bootloop.
So I tried to run rsd lite (sbf) and it did it's thing, but I'm still in bootloop.
Am I totally screwed here?
Click to expand...
Click to collapse
after the sbf finished did you take it off the usb, take out battery then put it back in and boot up from there?
paul89 said:
after the sbf finished did you take it off the usb, take out battery then put it back in and boot up from there?
Click to expand...
Click to collapse
hi paul. thanks for responding. see edit to orig post. all fixed. thanks though for helping out!!!
my phone wont restart after the framework-res push ....???
well, does this actually fix a bootloader problem? im just stuck at bootloader and i can't get into recovery or anything. just straight to bootloader.
also does bootloader erase all the files? meaning like roots and all?
After several unsuccessful attempts to mount 3.1 on my Xoom, something seems to have caused the display to reverse. That is, the display is a mirror image of what it should be! This starts with the boot-up image of the Motorola Icon and carries all the way through till it's up. Several restarts have failed to resolve it, and it has me in a bit of a panic.
Have I just bricked my Xoom? Has this happened to others? Ideas? Suggestions? There's nothing on it that I have to save, so I could re-flash it, but I am not sure if/how to do this.
Many thanks in advance for any suggestions/fixes!
Phillip
Its not bricked if it boots...
That is strange though. May have to reflash stock images.
Try bringing everything back to stock?
Thanks, I would be happy to do that, but it's kind of hard to do it with everything backwards!
I had to hold my cell phone up to the screen to (barely) read the mirror image text in the System Recovery. But, when I selected (what I thought was) the 'Restore Defaults' option in the blue recovery area, I got another screen with a list of selections that I also couldn't read! Rather than choose the wrong thing, I opted to reboot, but no luck, alas.
Gr3yghost said:
Thanks, I would be happy to do that, but it's kind of hard to do it with everything backwards!
I had to hold my cell phone up to the screen to (barely) read the mirror image text in the System Recovery. But, when I selected (what I thought was) the 'Restore Defaults' option in the blue recovery area, I got another screen with a list of selections that I also couldn't read! Rather than choose the wrong thing, I opted to reboot, but no luck, alas.
Click to expand...
Click to collapse
No push the images using adb
I figured it could be done. Could you please point me to a thread explaining how to push images using adb?
Not sure if you have 3g or wifi but here are the 3g instructions
http://forum.xda-developers.com/showthread.php?t=988942
djsaad1 said:
Not sure if you have 3g or wifi but here are the 3g instructions
http://forum.xda-developers.com/showthread.php?t=988942
Click to expand...
Click to collapse
That's great, thanks for the info. I'll have to do this later today when I am at a PC (now at a Mac).
Any ideas about why this would happen in the first place? I've looked through the forums but haven't seen any other threads about this issue. It may be fixable with a reflash, but it sure was 'easy' to 'break' today without even knowing why...:^(
djsaad1 said:
Not sure if you have 3g or wifi but here are the 3g instructions
http://forum.xda-developers.com/showthread.php?t=988942
Click to expand...
Click to collapse
I have the 3G model. Looking at the instructions in that post, I have to admit I am not sure about a few (like most!) of the steps. It may become more apparent when I am doing it, but right now I am not clear as to where these steps take place.
[edit] Ok, I have just done some more reading and it appears I have quite a bit of work ahead of me, and that's just to get back to square one. Dang this was too easy to mess up!
I am confused now, I figured you would have adb installed since you already tried upgrading to 3.1 a few times.
All you need to do is flash the stock system, recovery, and boot image files.
djsaad1 said:
I am confused now, I figured you would have adb installed since you already tried upgrading to 3.1 a few times.
All you need to do is flash the stock system, recovery, and boot image files.
Click to expand...
Click to collapse
Sorry for the confusion, but I haven't been using adb. I was trying to install the update manually with a usb data stick and the microsd cord that came with my Xoom. That's how I got myself into this pickle...way too easy it was!
Sent it back
Thanks to all who helped here. I ended up taking it back to Verizon and asking for a replacement. This they did, and even shipped it overnight at no charge (though I had to ask them to do that--they were going to charge me). The fellow at the counter was as perplexed as me. Apparently this is not a common problem.
I decided to go ahead with the TW firmware upgrade. Everything seemed to be going fine until I tried to install it and it told me there was an error and I needed to hook it up to Kies first. I had already been using Kies with it on my Macbook for a couple weeks now so I went ahead and plugged it in. Kies recognized it as usual and all the information came up.
So I went on and tried to install again and it said it needed to reboot.
It reboots and comes to the Samsung Galaxy Tab 10.1 screen like normal (right before it starts the galaxy animation). Next thing I know it comes to a screen that looks like the attached images! I immediately unplugged it from Kies and shut it down. Every time I start it back up it does the same thing. I honestly have NO idea what to do. I can't even return it as it's past the 14 day period and I (stupidly) didn't buy Staples' bogus $160 insurance.
I was not rooted before. This was a stock tab that I bought at staples. It had the firmware 4.24 when I bought it, I think.
Please, any help is appreciated. I tried doing firmware recovery in Kies but the pop up comes up in Korean and I have no idea what it says...
Edit: More info. I'm not the only one with this problem. Two other people have posted on AndroidPolice about this. http://www.androidpolice.com/2011/08/04/samsung-galaxy-tab-10-1-wifi-touchwiz-ux-update-is-now-live/
The software is definitely running underneath all that mess but it's literally impossible to see what is going or to touch anything.
I guess this thread is about the same issue
http://forum.xda-developers.com/showthread.php?t=1203610
Thanks, I'm checking the thread out now. I probably should have searched more than just Google before posting but I freaked out when it happened.
No need to freak out . we have xda and dev to solve all our problems
i have exactly the same problem as you... what should i do now?
I get the same screen but after rebooting! pfft it's making me really sad :\
I'm sorry but I tried reading this http://forum.xda-developers.com/showthread.php?t=1171089 and couldnt understanding what should I do!
What CWM + my device is not rooted, all I could understand is that the thread contains instructions on how to root your device..
I just want my normal screen back!
Please tell me what to do in simple english :\
And now I did a wipe and the stripes are gone, but the screen is black instead :\ still not working. Please help me!
Are you sure you didnt sit on it?
Amal Kadi said:
I'm sorry but I tried reading this http://forum.xda-developers.com/showthread.php?t=1171089 and couldnt understanding what should I do!
What CWM + my device is not rooted, all I could understand is that the thread contains instructions on how to root your device..
I just want my normal screen back!
Please tell me what to do in simple english :\
Click to expand...
Click to collapse
haha i had the same problem go look at my threat that was posted above. in thier someone posted instructions on what to do the link you posted contains the download to the things needed heres a basic rundown of what you need to do
install clockwork recovery mod "CWM" to replace your bootloader.
download and install stock 3.1 and you should have your tab back to normal.
my help thread has the instructions to instal CWM
tonyurquiza said:
haha i had the same problem go look at my threat that was posted above. in thier someone posted instructions on what to do the link you posted contains the download to the things needed heres a basic rundown of what you need to do
install clockwork recovery mod "CWM" to replace your bootloader.
download and install stock 3.1 and you should have your tab back to normal.
my help thread has the instructions to instal CWM
Click to expand...
Click to collapse
So I need to follow all the steps for rooting except the last one which is the actual rooting? Great thanx! Do I need to use Kies? My current computer is Mac but I guess I need to download those things to a Windows machine to make it work, right?
Thank you very much
I had the same problem. I upgraded the update on my non-rooted tablet and got the funked up video mess. Per instructions from Samsung support, I hard booted to the recovery menu (power+vol down, then power up, down on download screen) and did the factory wipe. After that I ended up with the black screen. I could tell things were working in the back but couldnt see a thing. I figured I would throw it on the Kies and it saw that there was a factory upgrade so I let the Kies run through it and it works fine now.
Dont know if this will help w/other but it worked for me.
big ol' noob here. i just flashed the Jelly-Bean_4.1.2_CM10-FLEX_v6supercharged_Aroma rom on my a500 which previously had lightspeed 4.8 on it. now when it boots it shows the android guy with gears for a second then just a blank black screen. the backlight is on so you can tell the tablet is still on. i can still get into recovery with no issues though("aman ra-iconia-3.17-ics" via "scrilax_CZ bootloader v8") i dont know what it could be though. installation of rom gave no errors. so please, I ask for assistance in resolving the issue. i was looking into (and learning about) fastboot fixes but i'm not sure if it applies to me nor have i tried it before. any help in fixing the darn thing would be much appreciated.
raotheconqueror said:
big ol' noob here. i just flashed the Jelly-Bean_4.1.2_CM10-FLEX_v6supercharged_Aroma rom on my a500 which previously had lightspeed 4.8 on it. now when it boots it shows the android guy with gears for a second then just a blank black screen. the backlight is on so you can tell the tablet is still on. i can still get into recovery with no issues though("aman ra-iconia-3.17-ics" via "scrilax_CZ bootloader v8") i dont know what it could be though. installation of rom gave no errors. so please, I ask for assistance in resolving the issue. i was looking into (and learning about) fastboot fixes but i'm not sure if it applies to me nor have i tried it before. any help in fixing the darn thing would be much appreciated.
Click to expand...
Click to collapse
You should change the title to "Stuck in APX Mode". Refine your search. I've never had the issue, however, I believe 1 or more partitions are messed up. Which means you will probably have to revert back using TimmyDeans V4 rollback tool at the worst.
Just a guess. But search the forum for those terms. You should be able to find some threads as I've seen several references to being stuck in APX mode.
One place you may want to post your issue, is Skrilax_CZ's bootloader thread. He may know some fastboot commands to wipe the data.
MD
cool. I'll do that. thanks man. I'm still learning the lingo so that sheds a bit of light for me and gives me some direction to start. thanks again.
raotheconqueror said:
cool. I'll do that. thanks man. I'm still learning the lingo so that sheds a bit of light for me and gives me some direction to start. thanks again.
Click to expand...
Click to collapse
Also remember, before you install a different rom, you must; in CWM
1. Wipe User Data/Factory Reset
2. Wipe Cache
3. Wipe Dalvik
Then go to Mounts and Storage and;
1. Format System
2. Format Flexrom
Then you can install the rom. If you haven't done this, you should try again.
MD
raotheconqueror said:
big ol' noob here. i just flashed the Jelly-Bean_4.1.2_CM10-FLEX_v6supercharged_Aroma rom on my a500 which previously had lightspeed 4.8 on it. now when it boots it shows the android guy with gears for a second then just a blank black screen. the backlight is on so you can tell the tablet is still on. i can still get into recovery with no issues though("aman ra-iconia-3.17-ics" via "scrilax_CZ bootloader v8") i dont know what it could be though. installation of rom gave no errors. so please, I ask for assistance in resolving the issue. i was looking into (and learning about) fastboot fixes but i'm not sure if it applies to me nor have i tried it before. any help in fixing the darn thing would be much appreciated.
Click to expand...
Click to collapse
Try the wipe commands suggested in post #4 and then reflash your JB ROM. A lot of time it helps with reflash the ROM after wipes.
thanks for the tips. i believe i've actually performed them like you guys told me but it seems i've made it worse. my ridiculousness is currently going on in this thread here
I'm having the same issue with this ROM. I'm using the same recovery you are.
if you have any progress let me know cause i'm still stuck in apx land...
final update
Back to stock HC 3.2.1 right now. my issue ended up being unable to format the /data directory causing all my newly flashed roms to not load properly. per JdgM3NT4L's guidance i used the tutorial and tools here which took me back to a working status. now my only problem lies with what delicious rom should i have next? an ICS or a jellybean? if any XDA tutorials or assistance help bring you tablet back, make sure to click those ":good: thanks" buttons guys.
Hey guys,
So once upon a time, actually about a month ago, I had this great idea to root and flash CM on my AT&T GS4 on 4.3. Well I used Kingo Root and it went fine. But then came the flashing part. I went through all of the steps to get CM, until I saw to the "Downloading" Odin Mode screen and quickly realized the tutorial I used, did not take into the account I had a locked bootloader.. (Thanks AT&T..) Well I finally got out of that and quickly unrooted because I was scared of causing more damage.
Then came along the 4.4 KitKat OTA update which I desperately want. 4.3 is a disaster on my GS4. Anyways, after it downloaded and started to install, it restarted to the Odin Screen!! And so I got out of that.. again.. And now I'm back on 4.3 with no current issues. Except that I figured a factory reset would help me. Once again, it took me to the Odin screen and apparently I'm not going to be factory resseting either..
I really want to go to the exact way I got it. So I can start fresh and get the 4.4 update. I had seen where you could go into the recovery screen and select to wipe all data, but I'm not sure and do NOT want to lose my phone because it works right now.
So any thoughts?
Kwwolves2012 said:
Hey guys,
So once upon a time, actually about a month ago, I had this great idea to root and flash CM on my AT&T GS4 on 4.3. Well I used Kingo Root and it went fine. But then came the flashing part. I went through all of the steps to get CM, until I saw to the "Downloading" Odin Mode screen and quickly realized the tutorial I used, did not take into the account I had a locked bootloader.. (Thanks AT&T..) Well I finally got out of that and quickly unrooted because I was scared of causing more damage.
Then came along the 4.4 KitKat OTA update which I desperately want. 4.3 is a disaster on my GS4. Anyways, after it downloaded and started to install, it restarted to the Odin Screen!! And so I got out of that.. again.. And now I'm back on 4.3 with no current issues. Except that I figured a factory reset would help me. Once again, it took me to the Odin screen and apparently I'm not going to be factory resseting either..
I really want to go to the exact way I got it. So I can start fresh and get the 4.4 update. I had seen where you could go into the recovery screen and select to wipe all data, but I'm not sure and do NOT want to lose my phone because it works right now.
So any thoughts?
Click to expand...
Click to collapse
The best way to prepare your previously rooted phone for the OTA official update is to Odin back to stock your current firmware.
http://forum.xda-developers.com/showthread.php?t=2621279
Good luck.
John The Rhino said:
The best way to prepare your previously rooted phone for the OTA official update is to Odin back to stock your current firmware.
http://forum.xda-developers.com/showthread.php?t=2621279
Good luck.
Click to expand...
Click to collapse
Thanks for the reply, from what I have read, I think this going to help me.
Kwwolves2012 said:
Thanks for the reply, from what I have read, I think this going to help me.
Click to expand...
Click to collapse
I hope it does. Either way post your results. Also if you need more help it's here on XDA. Good luck.
So far so good
John The Rhino said:
I hope it does. Either way post your results. Also if you need more help it's here on XDA. Good luck.
Click to expand...
Click to collapse
This has seemingly completely reset my phone to factory settings which is what I wanted. I have not tried the OTA update yet, but I will try to post the results of that after I see how it goes.
Kwwolves2012 said:
This has seemingly completely reset my phone to factory settings which is what I wanted. I have not tried the OTA update yet, but I will try to post the results of that after I see how it goes.
Click to expand...
Click to collapse
Yup. Odin back to stock is the best way to go. Even if you decide not to take the official Kit Kat OTA update, you now have a fresh factory firmware installed. You can root, install Safestrap recovery & back up your stock rom (which I highly recommend) and flash custom roms, of which there is now some 30 + for our beloved MK2 S4. Either path you chose, you are going to be fine.