Related
Hey all there,
i just bought for some cheap money a milestone 2 on the bay with bootloop problems.
it startsup like this:
just power on with the power button:
red m logo, after some seconds it turns for about a half second to a black screen, again red m logo, and again and again and again
enter the bootloader works fine - 70.13
enter the system recovery works on charger, wiping out didn't help
flashing with rsd lite worked, but didn't change the situation with the bootloop. even after flashing, and wipe out after that.
i'm using windows 7 32bit and x64 on another computer in combination with rsd-lite 5.6
with rsd-lite 4.9 or earlier my device isn't recognized. admin and compitibility is on at all versions of rsd-lite.
anone an idea how to get this stone working again?
i'm a little confused, cause i saw so many posts, of people getting the stone back after flashing with rsd...hmm any help is pleased
greetz
Download rom GingerBread of UK
http://www.multiupload.com/TUZHXCGLMZ
Flash with RSD Lite 5.6... reboot
make wipes (POWER and X....... Vol + and Vol -)... reboot
has to boot normally ...
Just tried several versions of firmware. nothing did work.
i'm thinking about getting the 70.13 bootloader file and flash the bootloader once more.
or give it a try and flash the phone with an update.zip over recovery mode.
but first problem is: i don't have the booloader and the only mirror was megaload, at second i don't have any oem update.zip files. well i will look forward. can't understand why the phone is still looping.
would be happy about any other good suggestions.
greetz
Bootloader 70.13
thanks a lot for the bootloader, but did not help. still bootloop.
now i tried all german, DACH, UK GB fimware.
always rebooting and wiping.
Tha phone is still in bootloop.
May be an OEM update.zip could help. i still got access to the recovery mode.
is it possible to boot from the recovery mode into openrecovery, when the bootloader is original? don't think so, but will try that now.
still happy about an help here.
greetz
MKSilver said:
thanks a lot for the bootloader, but did not help. still bootloop.
now i tried all german, DACH, UK GB fimware.
always rebooting and wiping.
Tha phone is still in bootloop.
May be an OEM update.zip could help. i still got access to the recovery mode.
is it possible to boot from the recovery mode into openrecovery, when the bootloader is original? don't think so, but will try that now.
still happy about an help here.
greetz
Click to expand...
Click to collapse
Don't use a 2 ou 2.2 android..I think it's on GB so you can't downgrade..
Charge your battery to 100%
Folow the step here with a 2.3.4 SBF take here
Have a nice day.
Hey all there,
i already tried to flash GB 2.3.4 Firmware for: Germany, DACH, UK - didn't work out.
of course i did a wipe after installing.
also i tried a rebuilt by renaming CG66.img into CG37img - didn't work out.
just saw, that when i rebuilt the firmware after changing cg66.img to cg37.img, the cg37.img file doesn't appear in the new built SBF.
any reason for that? hmm...
while depacking and rebuilt a SBF i saw, that the RAMDLD.img (ramdownloader) in the 2.3.4 GB DE retail SBF is in version 70.12. i'm no expert in built SBF files, just did this the first time, but could this have an incompatibility with the 70.13 bootloader?
well cause the phone was quite cheap, i will go on trying. may be some more of you guys have any ideas.
the standing now is:
reflash 70.13 bootloader - didn't work out,
flash any 2.3.4 GB SBF and wiping out data after flash - didn't work out
flash update.zip from recovery mode - haven't tried yet - need update.zip file or instruction how to built one.
the last point is my next step i think. i will now go reading how to get this manage.
any help is welcome!
greetz
Okay just learned, that flashing an update.zip with system recovery, doesn't erase any data on the phone, so will look forward, trying flash the phone with sbf under linux live cd.
may be this will help.
does anyone of you know some hardware testing tools for the milestone 2?
to test the ram/rom hardware...
i'm starting to think, that some of the hardware chips may be damaged.
hmm i always thought, that it is not possible to brick a stone with original bootloader/rom-image/firmware. just starting to learn, that it is possible although.
any help is welcome guys! my ideas are going to end.
greetz
Got still no luck and tried to flash it with sfb about 16 times now. RSD-Lite tells me it was everything okay, but still bootloop.
Any good ideas?
Greetz
You have no real idea of the phones history, so you may have to accept the possibilty that it could be a hardware issue. Perhaps it has taken some water damage (the indicators do not always end up going off btw - I fell into a pool fully clothed and the nokia i had at the time wouldn't ever recognize a sim again, yet no water damage indicators get wet somehow . Yet the rest was soaking)
---------- Post added at 10:20 AM ---------- Previous post was at 10:16 AM ----------
A thought occurs.... does it actually have a sim card slot? Like... is it possibly a Droid 2? :S
---------- Post added at 10:25 AM ---------- Previous post was at 10:20 AM ----------
Mikevhl said:
I know it's a bit extreme to do, but it might help for you. Try installing ubuntu or wubi, then use sbf_flash on ubuntu. It takes some time, but if you REALLY need to SBF you should give it a try. Usage is:
chmod 777 sbf_flash
./sbf_flash /path/to/sbf/file
Click to expand...
Click to collapse
Got that from the recovery thread.
I dug up this guide to using ubuntu live cd to flash sbf's for the droid 2, hopefully you are switched on enough to workout what you need to do differently for the MS2
http://forum.xda-developers.com/showthread.php?t=804088
I'd try that and see what happen
Hey guys,
first: thx to DreadPirateDan. you're right, i don't know enough about the phone. So i sat down after work and startet to read and with all the basic information i know about the phone. While analysing all the things i just saw a special thing in the bootloader:
When the phone is switched on into bootloader, the screen shows:
"Bootloader Fastboot mode
70.13
Battery OK
OK to Program
Transfer Mode:
USB"
So it seems that i've got the fastboot script active. So i should do everything with the phone i want to do, right?
i will go on reading. maybe i will find any way to check all the files.
Is it possible, that the phone loops because of fastboot mode and a secret saftyissue which bans all phones booting with active fastboot?
May any of u check on a not rooted and for difference rooted milestone 2, if the fastboot notify is standard?
Btw - got a Sim-Slot, so it seems to be a Milestone 2.
greetz
This ones a long shot - but if you have another USB cable available, try using that. Perhaps the one you are using is somewhat damaged - not enough to cause errors flashing, but enough to corrupt data? I don't know but i'd certainly give it a try! .
---------- Post added at 08:00 AM ---------- Previous post was at 07:59 AM ----------
Yeah that's the screen of bootloader saying it's all sweet to flash with rsd-lite
So that's a good sign
I'm concerned perhaps it's had some physical damage to the system storage.
I'm just confused, your steps appear to be all correct, what you've done allready, and it should have worked allready!
How did u get into Bootloader Fastboot mode???
Are you sure it says 'Fastboot' coz Fastboot could mean unlockable bootloader?
May be some developer could throw some more light on this.
When we first got the Chinese GB link I remember there were a couple of guys who had deceloper phones.. They never explained how they'd got them though lol
Sent from my MotoA953 using xda premium
Fastboot confirmed
Hey Guys,
well its definitly Fastboot. I installed Android SDK yesterday and tested a little bit.
I can flash images through fastboot and all those things.
Poblem is, i'm not so familiar with all those things. I know a little bit of electronics but not so much about how software and specially android works with the hardware. Just started yesterday to read about this.
Attached are some pics of my phone during bootloader and how it looks.
Now it would be first nice, to get this thing work!
Because at the moment it hangs still during booting, cause i don't know so much about how to flash from fastboot.
When it is true, that this could help this forum here, i won't sell it anymore. But i need help to work all this out.
I contated parallely the customer service of motorola at my country, to ask, if this device has still waranty via IMEI, but they don't have this IMEI in their database.
So come on guys, more information, how get the phone work again, may be with any rom we wish someday without hacking anything
greetz
I have the same problem. tried to bootstrap after ive installed cyanogen 7 and now im stuck on the M logo. wiping cache or factory reset won't work
thing is the links for sbf files at and-developers won't work :\ so now i cant flash anything
plz help
Alot of file sharing stuff got shut down just recently that's why all the links are dead
if you had previously upgraded to gingerbread, that is your problem - cm7 doesn't work with it. Have a crack at the dowgrade method endless7 has and then you can flash cm7 with CWM.
ok, i figured it out. just searched google for one of the builds. flashed it and it turned out to be a french retail version of froyo. installed MIUI rom. works fine
I maybe resurrecting this but I need help. I got my milestone 2 yesterday and then I rooted it successfully and then I tried to use ClockworkMod (Rom Manger mainly) to flash CM7. and well my phone is stuck in a boot loop now. It starts with a red M logo and then it goes to the CM android sliding in and the circle spinning then freezing and going again. I can only get into bootloader mode and when ever I plug my phone into my computer to use RSD it says chip error 43. I can't even find an SBF for my phone since all the links where to Megaupload. Please help
EDIT:
Okay so I just used the newest version of RSD and got a SBF for my phone but still the same thing happened. This time RSD kept on going and the CM android did what it was doing before.
Nikunj3xP said:
I maybe resurrecting this but I need help. I got my milestone 2 yesterday and then I rooted it successfully and then I tried to use ClockworkMod (Rom Manger mainly) to flash CM7. and well my phone is stuck in a boot loop now. It starts with a red M logo and then it goes to the CM android sliding in and the circle spinning then freezing and going again. I can only get into bootloader mode and when ever I plug my phone into my computer to use RSD it says chip error 43. I can't even find an SBF for my phone since all the links where to Megaupload. Please help
EDIT:
Okay so I just used the newest version of RSD and got a SBF for my phone but still the same thing happened. This time RSD kept on going and the CM android did what it was doing before.
Click to expand...
Click to collapse
hi,
Can you please explain clearly if you are able to boot CWM recovery or are you just getting a boot loop and unable to boot to recovery? As far as I know you won't be able to flash clockwork mod recovery for the Milestone 2 using ROMManager .You need to use Droid 2 bootstrap recovery.
Hi guys, you are my last hope!
Bought my Defy early 2011 and regularily updated with custom ROMs, so you could say I know a thing about rooting, RSD Lite, fixed sbfs, ...
Or at least I though I knew, but I still managed to kill my phone I think.
Here's what happend:
I tried to install Epsylon3s nightly from may 8th (http://defy.wdscript.fr/defy-cm9/). Before that, I was on CM 7.1
After installing the zip and rebooting, I saw the bootlogo, then i was asked for my pin code. As soon as i entered it, again to the bootlogo, again the pin, and so on.
So i realized something was wrong.
Could not get into recovery, so I flashed
JORDN_U3_97.21.51.sbf
as this often helped me in the past.
I then tried this one:
http://forum.xda-developers.com/showthread.php?t=1498843
Also didn't start.
So back to
JORDN_U3_97.21.51.sbf
But here it might be, that I misclicked (I have quite some SBFs in that folder, cause I wanted to be prepared in case something went wrong), as after that, I never got my Defy to work again.
I was stuck at the Motorola M logo.
Coudln't get into recovery, so no zips for me anymore, only flashing of sfb.
That's basically when I entered panic mode. As I didn't know what I just flashed, I could only guess the problem. So I tried the Ginger2Froyo (http://forum.xda-developers.com/showthread.php?t=1486731) in case I went to BL6. Also tried http://forum.xda-developers.com/showthread.php?t=1552152
But in this process, my RSD Lite started to behave strange:
when flashing, it's building the image, uploads it, checks checksum. But once it says "rebooting" it immediately jumps to 100% and pass. Phone how ever stays black and white LED.
Of course I can still flash other SBFs, and I tried various (JRDNEM_U3_3.4.3-36-1.7. sbf for example). But I either get the instant PASS, which tells me something didn't work, or sometimes I get the neverending bootlogo and RSD telling me to start the phone manually.
So... that's my story.
I can't seem to find a single SBF that would work for me. I screwed up big time.
To make this clear: at this point I don't care about downgradeability or anything thelike. Whatever makes my Defy work again, is fine. Froyo, Ginger, ICS, or whatever.
So if anybody still has any advice for me, I'll love you forever! Promise!
Thanks a lot in advance for any help you sure will offer,
Clock
Try this if you haven't :
Go into stock recovery and make a factory reset
Sent from my MB526 using XDA App
As I said, i cannot even enter recovery.
I'd be really happy to find an sbf, that at least lets me reset my phone.
Have u tried this thread:
http://forum.xda-developers.com/showthread.php?t=1486731&highlight=bl6+downgrade
Clock1999 said:
As I said, i cannot even enter recovery.
I'd be really happy to find an sbf, that at least lets me reset my phone.
Click to expand...
Click to collapse
Im sorry , thought you mean custom recovery when you say you can't enter recovery.
I was in the nearly same situation but i never changed my bootloader...., by me out works to power up my phone with pressed volume button down to enter stock recovery ...
So I'm sorry i couldn't help you
Sent from my MB526 using XDA App
You just like to play with your defy, don't ya
Have you tried the suggestions under Common problems/questions in this guide?
Thanks for all the responses.
However all the guides seem to point to two options only:
1) Flash this one Eclair (which I already mentioned that I did, that it used to work, but since the "instant 100% on rebooting" doesn't anymore.
2) Factory Reset/Wipe. Which I cannot, as I don't get into Recovery Mode. All I can do atm, is flash SBFs. Defy won't enter Recovery Mode (which I guess is a pretty bad sign)
But the way I always understood it, was that you only need to be careful what you install, so you don't lose downgradeability. And that, once lost, you wouldn't be able to flash "older" roms, but newer ones would always be possible.
So shouldn't there always be a rom, that saves me?
What about Defy+ roms? Any advice on that? Which best to try first? So far, I haven't touched Defy+ roms at all.
Thanks for the support!
Did you try this:
When Off, press Vol. down and power.
You'll get an exclamation mark inside a triangle.
Press both Vol. up and down at the same time.
Now you suppose to be in stock recovery and you can do factory reset.
Do the above after flashing stock SBF.
Hello again!
In the meantime, I flashed some 30 different SBFs, and at least I learned something:
when the bootloader verson is 6, I get stuck at Motorola Logo. I can enter bootloader mode, but not Stock Recovery.
When bootloader is below 6, RSD Lite doesn't get the Dey to reboot, but shows instant 100% PASS.
Okay, maybe this was to be expected, but I didn't realize how very similar sounding ROMs have very different bootloaders...
So: can anybody guide me on whether installing a BL7 ROM would repair my problem?
I read elsewhere, that my green lense definitely will not work. Is this true, or are there fixes? And if it's true: if I'm sure the rest will be working again, I'll take that. If I just rob myself of future chances, I'll pass.
And hints here?
Thanks in advance so much! One week without a phone is pure horror!
Clock
If you haven't flashed BL7, then check this http://forum.xda-developers.com/showthread.php?t=1486731&highlight=bl6+downgrade&page=2
Clock1999 said:
Hello again!
In the meantime, I flashed some 30 different SBFs, and at least I learned something:
when the bootloader verson is 6, I get stuck at Motorola Logo. I can enter bootloader mode, but not Stock Recovery.
When bootloader is below 6, RSD Lite doesn't get the Dey to reboot, but shows instant 100% PASS.
Okay, maybe this was to be expected, but I didn't realize how very similar sounding ROMs have very different bootloaders...
So: can anybody guide me on whether installing a BL7 ROM would repair my problem?
I read elsewhere, that my green lense definitely will not work. Is this true, or are there fixes? And if it's true: if I'm sure the rest will be working again, I'll take that. If I just rob myself of future chances, I'll pass.
And hints here?
Thanks in advance so much! One week without a phone is pure horror!
Clock
Click to expand...
Click to collapse
If you flash any of the defy+ roms, camera won't work..there isn't a fix or patch for that..
Doesn't matter from where I send it, what matters is written above
corrinti said:
If you haven't flashed BL7, then check this http://forum.xda-developers.com/showthread.php?t=1486731&highlight=bl6+downgrade&page=2
Click to expand...
Click to collapse
Hi,
as I mentioned above, I already tried this ROM but it gives me the same result as all the others: stuck at bootlogo.
Maybe there is a special trick on which ROM I should flash before flashing this one?
Sorry, I do not know how to help. Just no idea now, try to dig the forum.
Once I had very similar problem - whatever I flashed I was stuck at bootlogo. And in my case I found out that just before flash my internal memory had been filled with some mess, which was not removed by any wipes (cache, dalvik cache, cache partition) and after any flash memory was too filled to start the system.
But finally I could flash Chinese eclair (CG5), which at last started horribly laggy, and I could wipe private data from a system - it gave me more than 1GB of internal memory back (from 40MB after all wipes and clean system install) and a way to flash whatever I wanted without a problem.
So even if it is also your problem, my way is not available to you now. Maybe you can find as small sbf file as possible and try then.
I'm sorry, but I don't quite get, which ROM saved you, and why that is no option to me. Can you please clearify? Thanks a lot!
Clock1999 said:
I'm sorry, but I don't quite get, which ROM saved you, and why that is no option to me. Can you please clearify? Thanks a lot!
Click to expand...
Click to collapse
I could use CG5 full sbf which will not boot for you as you put BL6 and maybe BL7.
To boot from flashed sbf it cannot be lower BL version.
I suppose that now you have a memory problem - flashing sbf do not wipe the memory.
At first I would try getting into stock recovery (even several times, just pull battery out, wait a minute, power, vol -, battery in) - if successful then do a factory reset and reboot.
If not I would try to find out a smallest sbf with proper BL version - just to give it more chance to boot with small memory available, if not then again try to get into stock recovery.
I'm the happiest guy around, as I finally revitalized my Defy.
For all you guys, who already tried everything: here's what worked for me.
Just let it rest a few days.
After I hadn't touched my phone for a couple of days, I thought about giving it one last try. So I flashed the Defy+ SBF (4th in this list: http://sbf.droid-developers.org/umts_jordanplus/list.php), like I've done multiple times before.
But this time, when rebooting, I wasn't stuck at the M-logo, but in a bootloop. And that gave me the smiles as I knew, that now I should be able to enter Stock Recovery again. From there on, it was no problem to get to a stable base again. After flashing the BL6 Froyo, I'm now on CM9 and everything is fine.
Thanks for all you help.
Sometimes, you just have to give it a rest...
Clock
It is a next such case I see in moto forums ;-) but it is really hard to give a tip: leave it for few days and check again
Use the sbf_flash for Linux
Sent from my MB526 using Tapatalk 2
Hello!
I was about to unroot and get back to stock with my A500 so I flashed a stock ROM via CWM to get a ota-update. Before i had a custom ICS ROM installed and now I installed a HC stock ROM. The problem is that i forgot to go through the wipe menu in CWM before the flash and now when I start up my tablet I first see the ACER logo as usual, then a android text-logo which the tablet is stuck at. I've waited 20 minutes and is still shows the same thing. The logo has an animation which i still can see. I've tried to restart the tablet and get into CWM again without succes.
I have read diffrent threads for several hours but I can't find my problem. What should I do? :crying:
what does the android text say?
Hi dibb_nz.
It is the bootanimation from what I gather (Video; http://s1142.photobucket.com/albums/n602/JdgM3NT4L/?action=view¤t=AndroidBootanimation.mp4). I am trying to help someone get a tab up that is doing the same thing as well. The weird part is that recovery is good, bootloader passed (V8), wiped data/cache/system. Tried three ICS roms so far, and every one is stuck at the bootanimation. About to go bonkers trying to figure it out. The only thing that I can think of to try next is changing CWM from Thors to TWRP or something...
To Webspirit, your problem will most likely get fixed by using blackthund3rs APX Tool. Google it and then goto the forum where it is. There's plenty of support for getting that going and you shouldn't have any problems. If you do holler. Alot of us have had to use that tool and can help. I am hopeful that yours will be as simple as downloading and installing recovery back and flashing a nice rom.
Yeah i agree with the guy above me, your going to have to flash something from apx
Sent from my A501 using xda app-developers app
JdgM3NT4L said:
Hi dibb_nz.
It is the bootanimation from what I gather (Video; http://s1142.photobucket.com/albums/n602/JdgM3NT4L/?action=view¤t=AndroidBootanimation.mp4). I am trying to help someone get a tab up that is doing the same thing as well. The weird part is that recovery is good, bootloader passed (V8), wiped data/cache/system. Tried three ICS roms so far, and every one is stuck at the bootanimation. About to go bonkers trying to figure it out. The only thing that I can think of to try next is changing CWM from Thors to TWRP or something...
To Webspirit, your problem will most likely get fixed by using blackthund3rs APX Tool. Google it and then goto the forum where it is. There's plenty of support for getting that going and you shouldn't have any problems. If you do holler. Alot of us have had to use that tool and can help. I am hopeful that yours will be as simple as downloading and installing recovery back and flashing a nice rom.
Click to expand...
Click to collapse
hi J...ok thats cool re boot anim...i asked becoz like u i been trying to help a couple of others who can't use any of the flash tools or roll back to HC...i only just got myself fixed after being stuck in apx, no recovery, and boot screen saying in red text "reboot device" thought he may have had similar issue....
J...have u used nvflash or apxflash to roll back - theres a few folks getting stuck with it...its loading the HC apx driver which aint working with the ics bl so then yr tab gets stuck in apx!!!
I started a new thread hoping someone can help us all out be great to hear yr thoughts on this....its driving me up the wall
sorry didnt mean to hijack the thread
This evening I received my 4.4 ota only for it to get stuck on the opening animation. After reading other peoples issues here I put it in recovery and wiped cache. Still stuck on animation. I then did a factory reset and still stuck on animation. What is my next option?
lennyboi77 said:
This evening I received my 4.4 ota only for it to get stuck on the opening animation. After reading other peoples issues here I put it in recovery and wiped cache. Still stuck on animation. I then did a factory reset and still stuck on animation. What is my next option?
Click to expand...
Click to collapse
Use the first guide in my signature if your device is bootloader locked, or the others if unlocked.
lennyboi77 said:
This evening I received my 4.4 ota only for it to get stuck on the opening animation. After reading other peoples issues here I put it in recovery and wiped cache. Still stuck on animation. I then did a factory reset and still stuck on animation. What is my next option?
Click to expand...
Click to collapse
I had that happen tonight as well. I used Mr. Skip's toolkit to side load stock 4.3 back and then the OTA pushed again and it went OK.
He already did a factory reset which wipe out the entire device, there is no point of going back 4.3 to get the OTA. Flash directly the 4.4 factory image.
Thanks for your replies, I have not much experience in this and your guide as detailed as it is doesn't make much sense to someone like me with limited knowledge in this area. Is there a basic guide someone could direct me to please? I really need my phone back!
lennyboi77 said:
Thanks for your replies, I have not much experience in this and your guide as detailed as it is doesn't make much sense to someone like me with limited knowledge in this area. Is there a basic guide someone could direct me to please? I really need my phone back!
Click to expand...
Click to collapse
Search youtube for video guides:http://www.youtube.com/results?search_query=how+to+flash+factory+image+nexus+4&sm=3.
This guide might be easier to understand as well: http://forums.androidcentral.com/ne...3923-guide-nexus-4-factory-image-restore.html
I followed one of the videos on youtube to use Skips Toolkit(?) to get my phone back on with 4.4 installed. I installed drivers as stated and it seemed like everything was going ok, then the update failed and now pc won't recognise phone/usb so I'm a bit stuck now. Does anyone have any tips of my next move I'm starting to panic now. Thanks for the help so far
Can anyone help with my problem please?
lennyboi77 said:
I followed one of the videos on youtube to use Skips Toolkit(?) to get my phone back on with 4.4 installed. I installed drivers as stated and it seemed like everything was going ok, then the update failed and now pc won't recognise phone/usb so I'm a bit stuck now. Does anyone have any tips of my next move I'm starting to panic now. Thanks for the help so far
Click to expand...
Click to collapse
Go back and reload 4.4 with Mr. Skip's toolkit again. It should be able to see the phone even if the PC doesn't.
Thanks for reply. I have tried it doesn't seem to recognise my phone, it did first time though. I'm beginning to tear my hair out now
"device mode cannot be detected"
A couple weeks back I deleted the OS off of my phone while messing with TWRP recovery trying to install a custom ROM. I looked around the forums and i got my phone to the point where It booted into a stripped down version of android with stock recovery on it, although everything was mirriored and backwards. But when i tried to install the stock rom for my LeEco S3 with stock recovery it got stuck i a boot loop and I couldn't turn off the phone or boot into recovery or anything. So i let it keep booting until it ran out of battery and died. So then i decided i would put the stripped down version back on and start again.
So I went back to my sp flash tool and reinstalled all the partions except the boot and recovery partitions (according to the steps on the forum) but my phone still wont boot into anything, it is completely black and wont boot into recovery or fastboot, and im running out of ideas on how to fix this phone :crying:
After pretty much giving up all hope of fixing my phone, i figured i would try the format option in the flash tool and then reinstall all of the pattitions. I selected format all flash, not doing proper research first, and now i cant even reinstall partions, I get a STATUS_BROM_CMD_SEND_DA_FAIL error anytime i try to flash the partitions.
can you at least get the phone to fastboot mode?
microMXL said:
can you at least get the phone to fastboot mode?
Click to expand...
Click to collapse
No I cannot, The screen is completely black and nothing comes on at all if I hold down the power button.
well damn, looks like a soft brick, it can be repaired but not gonna lie, it is a pain in the butt...
https://forum.xda-developers.com/le-2/help/bricked-le-s3-x626-flashing-twrp-power-t3715937
the guys have made an awesome guide on that thread.
microMXL said:
well damn, looks like a soft brick, it can be repaired but not gonna lie, it is a pain in the butt...
https://forum.xda-developers.com/le-2/help/bricked-le-s3-x626-flashing-twrp-power-t3715937
the guys have made an awesome guide on that thread.
Click to expand...
Click to collapse
I have already looked through that thread, and i have done everything up to the flashing process, and then I get a STATUS_BROM_CMD_SEND_DA_FAIL (0xC0060003) Error. I looked it up but the only option I haven't tried to solve the issue is to remove the battery, which i cannot do currently because to remove the battery you need a heat gun to remove the screen to get to the rest of the phone. I think I've given up all hope on fixing this phone and may just begin saving for a new one.
Sgt.Collywobbles said:
A couple weeks back I deleted the OS off of my phone while messing with TWRP recovery trying to install a custom ROM. I looked around the forums and i got my phone to the point where It booted into a stripped down version of android with stock recovery on it, although everything was mirriored and backwards. But when i tried to install the stock rom for my LeEco S3 with stock recovery it got stuck i a boot loop and I couldn't turn off the phone or boot into recovery or anything. So i let it keep booting until it ran out of battery and died. So then i decided i would put the stripped down version back on and start again.
So I went back to my sp flash tool and reinstalled all the partions except the boot and recovery partitions (according to the steps on the forum) but my phone still wont boot into anything, it is completely black and wont boot into recovery or fastboot, and im running out of ideas on how to fix this phone :crying:
After pretty much giving up all hope of fixing my phone, i figured i would try the format option in the flash tool and then reinstall all of the pattitions. I selected format all flash, not doing proper research first, and now i cant even reinstall partions, I get a STATUS_BROM_CMD_SEND_DA_FAIL error anytime i try to flash the partitions.
Click to expand...
Click to collapse
Help, pls I got the exact same problem... Pls any solution to it... I have been at it for a month now no solution, help
same problem. after twrp flash x626 not boot