Related
Hi everybody,i'm using cingular 8125 and i have a problem.I installed new windows and the phone discharged.I charged it directly with oder charger because with normal charger or true pc it's not charging.Now when i turn on the phone i see htc logo and nothing else.I even don't see the ipl/spl/gsm/os info.Just htc logo and nothing more.
I tried to enter bootloader mode,but it don't connect to pc.
Please help if you can
can somebody help me?
Hi someoneee,
Please, let's clear your problem.
The phone discharged while flashing the new ROM, or after, while normally using?
What other charger you've used? Was it compatible?
Which ROM have you flashed?
Cheers
The phone discharged while normally using,after flashing.
I flashed CR96 Touch HD™ v6.5.0.3.3 RC5 rom.
I charged battery directly with wires from other battery.
I can turn on the phone,but he won't boot.It's just that htc logo from CR96 rom.
I used CR96 rom's for long time,but this is first time when i have this problem.
Man, I can't figure what went wrong with you...
Have you used SoftSPL or HardSPL? Don't worry, I'm just asking
And which system are you on? I've heard that Vista and 7 aren't that good for flashing...
If nothing helps you, search for topics about "Wizard Love ROM". Maybe that can help you.
Good luck man!
well i tried to hard reset my device when turning on,it's said that it completed,but it doesn't change anything.Well i use windows 7,but for flashing i use windows xp mode.
and yes i used softspl and hardspl
by the way,i can't flash anything,because when i turn on bootloader mode,it doesn't connect the device to the pc.I don't know what to do..
Hello people ...
not much to say ...
i think i bricked my phone .... =(
i installed one of the ROM downloaded from here ...
and it brick my device ...
what should i do ? :`(
it says on the screen :
" Your OS ROM isn't customized for you hardware.
Please refresh the proper ROM code or contact the service center. " ((
p.s. i cant install other ROM
couse it cant see the usb (((
i got the problem solved =)
guess it came from it self couse i was nurvios )))
i entered the hard boot menu pressed the UP (volume) button and then pressed 2 time i think the up(coluve) and down(volume) then it not entered the boot option but connected the USB ...
i installed other ROM and its working fine again ... )))))
so far I have seen 1000 people on xda developers that assume to have bricked their phone...and probably 1 out of 1000 has truly done something stupid to brick his phone.
[email protected] said:
so far I have seen 1000 people on xda developers that assume to have bricked their phone...and probably 1 out of 1000 has truly done something stupid to brick his phone.
Click to expand...
Click to collapse
And then there are the 999 who think they have done something clever, but still bricked their phone...
gladly im not one othe 1\1000 people that done it =)
i had my luck on this one =)
i guess i was celebrated too early...
i tryed to delete the HSPL
by the video tut ... ( yeh yeh ... what can be more easier )
well ...
it says to get a stock rom ( i did it )
it say to put it on the SD after formating it to 32 bit ( i did it )
then hard boot ... ( i did it )
power button ...
and ........... puff ...
now i get: ( On boot ):
PB81100 HX-BC
SPL-1.42.0000 XE
microP(LED) 0x05
microP(TOUCH) 0x03
Upgrage ROM code error
Please try again ...
WHAT IS THAT ? :`(
dose it means i brick it ?
(p.s.)
Tryed to install the HSPL again ...
the install is successfull. ... but no change on the device ...
you have used the wrong rom.
you must use the correct rom that was on the phone when you got it.
Or the correct region. In doubt, just enter your phone's serial number on the HTC download page (here for 1.66) to make sure you get the correct official rom.
Then extract it, put the nbh on your card, etc.
" Sorry, this software download is not suitable for your device. "
hhmm .... i had the hong kong rom originaly ...
maybe it means i have to download it from an hong kong htc site ?
yes....choose the hk site
Are you solved the problem?
How?
I have a similar problem.
I have the same screen at boot, but when I try load anything my device as stuck in progress bar (0%) even for shipped rom’s…
This happens when I try load a shipped rom from SD. Before that I have loaded several cocked rom’s from SD without problem.
the fix...
hold volume up and down together and insert the USB cable then run a different or a good ROM
Bricked friends hd2!!!?!?
PLEASE HELP... I was trying to install android throught NAND on my friends hd2,, in the process of flashing the ROM via Magdalr or whatever.. it froze so i pulled the battery.... and it doesn't turn on. I've pulled the battery on my other friends HD2 so im confused as to why this one in particular does not turn on! PLEASE HELP!!! SHE'LL KILL ME IF SHE FINDS OUT!!!
EDIT: PHEW i figured it out... but im having trouble installing these ROMs
Did i brick my phone??
So my brother was trying to do who knows what to my hd2 and now the hd2 powers on and it says "stick together" (its a t-mobile hd2) and it just stays on that screen.. I'm not the most tech savvy person so bare with me... usually below where it says "stick together" it would show a bunch of numbers and codes and after a few seconds it would load windows mobile and the phone would work fine. However, mine just stays on the stick together and theres no more of those numbers and codes on the bottom.
Did he just brick my phone? And if he did... HOW THE HECK DO I FIX THIS???
HELP :*( i need to use my phone!!
Thanks
Heh I'm in the process of doing my very first flash to get a full install of Andriod 2.2 on my HD2, once I find out a specific answer I've been looking for I'm gonna start the process
HD2 brick
I just bricked my HD2 (USA T-Mous). I tryied update RADIO when was progress on PC 100% in PDA 96% and freezed. I just pulled battery and phone is bricked. When I connect to PC via USB, i can listen twice short plug sound and this is all. No bootloader, nothing. Any reason? Thanks
Did you try to turn on your mobile pushing "vol down" to load usb mode ?
After that, you can flash an official rom.
That "saves" my Leo...
NarkotiQUE said:
I tryied update RADIO
Click to expand...
Click to collapse
if the radio had 51 in the version (example 2.07.51.xx) then it is a brick, dead, gone.
NarkotiQUE said:
I just bricked my HD2 (USA T-Mous). I tryied update RADIO when was progress on PC 100% in PDA 96% and freezed. I just pulled battery and phone is bricked. When I connect to PC via USB, i can listen twice short plug sound and this is all. No bootloader, nothing. Any reason? Thanks
Click to expand...
Click to collapse
Did you have any luck? Does your device have HSPL? Let me know if you still need assistance.
xtntx said:
Hello people ...
not much to say ...
i think i bricked my phone .... =(
i installed one of the ROM downloaded from here ...
and it brick my device ...
what should i do ? :`(
it says on the screen :
" Your OS ROM isn't customized for you hardware.
Please refresh the proper ROM code or contact the service center. " ((
p.s. i cant install other ROM
couse it cant see the usb (((
Click to expand...
Click to collapse
hi i'm looking for a motherboard htc hd2 bricked? can you sell yours?
I am new in this type of phone and I bricked it.
how I flash a rom with out HSPL and the phone dont do nothing only one thing
when I connect to the computer it reconize it like Qualcomm CDMA Technologies MSM
but now I dont know what to do to fix it. I think the phone is not damage because the pc
reconize it.
1. No LED light showing it's charging.
2. Won't power on at all.
3. Hard re-set doesn't work.
4. Can't get into bootloader.
I've had 5, and bricked two... Only hope is to just snatch the battery out for a few hours, and try again. Have a flash ready on A SD encase it ever starts unexpectedly.
Very similar to my story with a Happy ending here:http://forum.xda-developers.com/showthread.php?t=866852
you can contact the member of this group with the screen name of "trashcan"... he has the capability to jtag (revive) the unit.
My phone got a little liquid on it and after that it frozen so I did a soft reset and now my phone is freezing on android boot screen every time. The problem is what my MAGLDR is not working properly now too and my ClockworkMod Recovery is not working at all, so I don't know how to reinstall soft now. The MAGLDR is kind of flashing always and its hard to control as sometime its not reacting to my button push. And then I try to go into ClockworkMod Recovery its just starts loading, does that 1234 go and it freezes on it, every time. But besides all this stuff my phone looks like working fine, just looks like it just has some software damage. I think it should work with a new soft if not at least I can send it to my insurance as I will change a soft back to normal, because now my insurance will not fix my phone as it freezes on android boot screen so whey will see that I have android and not windows. Waiting for any good advice. Thank you
Btw. My original boot loader is not working too, I can't get in to it. I think its because of the android.
i suggest flash the stock rom first , then do all the work again flash MAGLDR and then recovery and then the android rom you want to use and read the instruction for your device if you using hd2 EU or hd2 T-Mobile ... good luck
A.J said:
i suggest flash the stock rom first , then do all the work again flash MAGLDR and then recovery and then the android rom you want to use and read the instruction for your device if you using hd2 EU or hd2 T-Mobile ... good luck
Click to expand...
Click to collapse
That's what I waned to do, but last time when I tried to connect it my computer couldn't find my phone. That's why I'm asked for a help here. I will try to connect it later today, after I come back from my work and I will post it here, if its connects or not
So yes, like I said before I cannot connect my phone using MAGLDR. USB Mass storage is working fine, when using USB Flasher my computer detects my phone but when I try upgrade a soft, I get connection error, it cannot find my phone. I don't know any other ways to connect my phone as I cannot get into boot loader Any help???
Sw1pe said:
So yes, like I said before I cannot connect my phone using MAGLDR. USB Mass storage is working fine, when using USB Flasher my computer detects my phone but when I try upgrade a soft, I get connection error, it cannot find my phone. I don't know any other ways to connect my phone as I cannot get into boot loader Any help???
Click to expand...
Click to collapse
'USB mass storage is working fine'
You may be able to flash a stock ROM from the SD card but I think it involves the bootloader. Have a look at This thread and see if it helps (I CBA to read it properly, sorry )
Thanks, but yes it involves the bootloader
Does Bootloader normally work if MAGLDR & ClockworkMod Recovery is installed on device?
yea man its working fine in my phone .... okay how about if you get your phone and connect it to another pc ... maybe the wrong with your pc ... and run the usb flasher and flash the stock rom bro
A.J said:
yea man its working fine in my phone .... okay how about if you get your phone and connect it to another pc ... maybe the wrong with your pc ... and run the usb flasher and flash the stock rom bro
Click to expand...
Click to collapse
Yeah that's a good point. If you can, trying PCs with different versions of Windows could help (i.e. XP, Vista, Windows 7 etc.)
Ok so I managed to connect my phone via USB Flasher on my work computer and I installed "[30.DEC.10][DFT]LEO "Stock Desire" NAND Android ROM" without any problems but my phone still stucks on DFT Boot screen. I also tried to reinstall MAGLDR and ClockworkMod Recovery to get Clockwork Recovery work but it didn't work, it didn't change anything. Does any one have any ideas what can I do next? Is it possible to install wm 6.5 via USB Flasher? As I know it needs bootloader Does any one have more ideas how to fix it?
yea bro install the stock rom as wm6.5 using the usb flasher ... get it back to the stock then re-install any rom you want
A.J said:
yea bro install the stock rom as wm6.5 using the usb flasher ... get it back to the stock then re-install any rom you want
Click to expand...
Click to collapse
I can't! Because wm 6.5 requires connection between bootloader or active sinc, there is not other way when instaling wm 6.5, and none of them work now on my device
take a look here, we have the same issue too... http://forum.xda-developers.com/showthread.php?t=899628&page=7
My HD2 has no rom. Im able to access the bootloader, which says SPL-2.08.0000. I tried to install stock rom 2.10 and 3.14 from tmobile using 2gb MicroSD card, but phone gets stuck in the grayish screen saying "loading" or install in progress but actuall goes no where.
I can't do it via a USB connection because my computer keeps trying to install the device driver and it can't find it. So I think the MicroSD card is the only option buts its not working for me as I mentioned.
I'm new today to XDA, and dont know what other steps to take. Thanks in advance to all.
Update: At one point, it started the install and stopped with the message: Radio_v2 - RSA failed
The drivers you need fmto get the required HTC USB Synced connection in the bootloader is included in the Active Sync (for XP) and Windows Mobile Device Center (for Vista and Windows 7). Click on the guide linked in my sig as there is a link in the guide to the Microsoft site that has the both of them.
The radio fail message means it failed to install the radio version that is with the stock ROM so the install of the ROM was aborted. Maybe flashing via USB will work if not you may have a hardware issue.
I can't get my phone to load a rom either but I accidently tried to put a touch pro 2 rom on mines not paying attention so what I want to know is if their is a way to erase the memory for flashing I did a master reset with the phone off already anybody else ran into this problem if so do u know what I could do
sharnellbraden said:
I can't get my phone to load a rom either but I accidently tried to put a touch pro 2 rom on mines not paying attention so what I want to know is if their is a way to erase the memory for flashing I did a master reset with the phone off already anybody else ran into this problem if so do u know what I could do
Click to expand...
Click to collapse
The only thing I know of that you can do to "erase the memoy" as you said. is to one use MTTY or just a Task 29. Sorry I can not find the original tread on MTTY for HD2 but that one should still work for you. The best thing in my oppinion though is to just run a Task 29 as it is the easiest and does the same as the MTTY. plus jst so you know when you flash a stock ROM it runs a Task 28 (wich is pretty much the same thing, some do argue this fact though) before it flashes the ROM.
Go and check out recognized developer ksubedi's HD2 NAND Toolkit. It makes doing anything to the NAND ofthe HD2 very easy and simple, including Task 29.
Now the only concern I have is can you still get to the bootloader by powering on the HD2 while holding the volume down button down? Cause if not you you bricked the HD2 when you flashed the wrong ROM by accident. If you can you can still run th Task 29, oh and you have to have HSPL flashed to the HD2 to use the Task 29 also.