Database Users

[SOLVED] HSPL and stock SPL still active F#00068002

Sorry to open up a new thread for this but I fear in the HSPL thread noone will see it.
I have a bad problem now with my new HD2.
I made HSPL and the process was working fine.
Tricolor-Screen is showing
PB81100 HX-BC
SPL-1.42.HSPL XE
0x05
CotullaHSPL 0x30
So it should be alright, I think.
But it won't let me flash any custom ROMs via USB Connection nor any ROM via microSD.
Running HSPL again does not help because it says it's already done.
And I can't go back to stock SPL because I can't flash via SD Card.
Everytime I try to flash via SD, I get a red "00068002" and nothing happens.
Seems like the stockSPL isn't completely gone or something like this.
I can use the phone without problem and stock-ROM is installable via USB, so something messed up during HSPL it seems.
Any help is very much appreciated!

UPDATE:
I managed to flash the stock ROM via microSD card after the 20+th attempt.
Will try HardSPL with another Computer again.

SOLVED:
I flashed the oldest stock ROM available via SD Card (1.43) then made HSPL via Windows7 64bit and now it's working.
Puhhh...I'm glad I hadn't bricked a €600 phone

[Q] Removing HSPL?!

Hi all,
So my phone is now freezing and I called HTC up and they are going to fix my phone. I got 2.08.HSPL on my phone.
I have a TMOUS phone, and what I did was download the latest TMOUS ROM and extracted the RUU_signed and named it to leoimg. I tried flasing it, no luck there, I've read that SDHC cards are not supported.
So what I did was to download HSPL3.exe and on the dropdown I selected 2.08.0000 SPL
Does that mean that HSPL is fully gone and I can go ahead and send the phone for a repair?
I'm asking because after flashing it with 2.08.0000 SPL I got a message saying, "we hacked it !".
Thanks.

simon_66 said:
Hi all,
So my phone is now freezing and I called HTC up and they are going to fix my phone. I got 2.08.HSPL on my phone.
I have a TMOUS phone, and what I did was download the latest TMOUS ROM and extracted the RUU_signed and named it to leoimg. I tried flasing it, no luck there, I've read that SDHC cards are not supported.
So what I did was to download HSPL3.exe and on the dropdown I selected 2.08.0000 SPL
Does that mean that HSPL is fully gone and I can go ahead and send the phone for a repair?
I'm asking because after flashing it with 2.08.0000 SPL I got a message saying, "we hacked it !".
Thanks.
Click to expand...
Click to collapse
What you did should have you good to go. But to duoble check put your pphone into bootloader and see what SPL it shows you have in bootloader.

On the bootloader it says
PB81111 SS-B3
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x050
Does that mean that HSPL is not there anymore?

simon_66 said:
On the bootloader it says
PB81111 SS-B3
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x050
Does that mean that HSPL is not there anymore?
Click to expand...
Click to collapse
Yep this means you no longer have HSPL on your HD2. If you did it would say.
SPL 2.08.0000 HSPL 8G XE
You would also see by Cottula in bootloader too ic you still had HSPL. so if you have flash the official ROM for you HD2 then you are back to stock and good to send it in for repairs.

T-Macgnolia said:
Yep this means you no longer have HSPL on your HD2. If you did it would say.
SPL 2.08.0000 HSPL 8G XE
You would also see by Cottula in bootloader too ic you still had HSPL. so if you have flash the official ROM for you HD2 then you are back to stock and good to send it in for repairs.
Click to expand...
Click to collapse
I flashed TMOUS ROM (Downloaded from the actual TMOUS site), and I used HSPL3.exe to install 2.08.0000SPL (Because I had 2.08.HSPL by Cottula)
Now when I go to bootloader It says this
Code:
PB81111 SS-B3
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x050
So for sure I dont have HSPL installed and I'm clear to send it back?
I dont want to send it, then have to pay the $40 for them to send it back to me and lose my warranty.

simon_66 said:
I flashed TMOUS ROM (Downloaded from the actual TMOUS site), and I used HSPL3.exe to install 2.08.0000SPL (Because I had 2.08.HSPL by Cottula)
Now when I go to bootloader It says this
Code:
PB81111 SS-B3
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x050
So for sure I dont have HSPL installed and I'm clear to send it back?
I dont want to send it, then have to pay the $40 for them to send it back to me and lose my warranty.
Click to expand...
Click to collapse
You are back to complete stock. So yes you are totally ok to send it in and have repairs done. You have the Stock ROM, the stock SPL, and stock Radio so you are good.

T-Macgnolia said:
You are back to complete stock. So yes you are totally ok to send it in and have repairs done. You have the Stock ROM, the stock SPL, and stock Radio so you are good.
Click to expand...
Click to collapse
thanks for this, it helps me too.... was lookin how remove hspl by Cotulla

If I want to overwrite the HSPL rom, in case I need to submit my phone to HTC which version of SPL do I have to install. Which one was installed previously? I don't know anymore..

cotyar said:
If I want to overwrite the HSPL rom, in case I need to submit my phone to HTC which version of SPL do I have to install. Which one was installed previously? I don't know anymore..
Click to expand...
Click to collapse
The stock SPL is 2.08.0000 but if you have flashed the latest T-Mobile update (that is if you hAve a T-Mobile HD2) the SPL is 2.10.0000.

T-Macgnolia said:
The stock SPL is 2.08.0000 but if you have flashed the latest T-Mobile update (that is if you hAve a T-Mobile HD2) the SPL is 2.10.0000.
Click to expand...
Click to collapse
What what what!?!?!?!?! I installed the latest TMOUS update and my SPL is still 2.08.0000
I sent my phone with the SPL 2.08.0000
Will that void my warranty?

simon_66 said:
What what what!?!?!?!?! I installed the latest TMOUS update and my SPL is still 2.08.0000
I sent my phone with the SPL 2.08.0000
Will that void my warranty?
Click to expand...
Click to collapse
Don't worry you are cool it is still a stock SPL. And the 2.08.0000 SPL is what was originaly on your phone. Sometimes the SPL does not get changed when flashing a official ROM because the SPL you have fits the requirements of the ROM.

T-Macgnolia said:
Don't worry you are cool it is still a stock SPL. And the 2.08.0000 SPL is what was originaly on your phone. Sometimes the SPL does not get changed when flashing a official ROM because the SPL you have fits the requirements of the ROM.
Click to expand...
Click to collapse
Few. For a second there you got me sh*tting my pants. lol

Cant remove my ROMs...

i cant flash my HD2 any ROMs or NAND or eaven run task29 all rom flash just stuck to 0% and then comes USB connection error or something else. Im stuck whit energy rom i downloaded a while a go. I use radio 2.15.50.14 and HSPL4 but i shows spl-2.08. When i try flash or use task29 to clean my phone nothing happens.. What should i need to do to make me able to run NAND .... Thanks!!!

but I shows spl 2.08
Click to expand...
Click to collapse
...... yes, go on, the rest of that number is?...
Cos if it says 2.08.0000 then that's stock and wont allow flashing.

yes, this is all thet read on security unlocked / boot ? menu
PB81*** HX-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30

would it help to install some different hspl / spl like 3/4 that u have linked? would those allow me to flash ROMs again? or how would i be able to do those? Thanks!

it will not only help, it is the only way, since your spl says 2.08.0000 which is stock meaning you DO NOT have hspl installed. Just because you used hspl program to set 2.08.0000, you have installed a stock spl, NOT hspl, so yes, use any hspl (2,3 or 4, doesnt really matter) to change your spl to 2.08.hspl.

[Q] Flashing a german HD2 with a stock rom

Hello,
I had my phone repaired where they changed its motherboard so now instead of being with an english WWE rom it has a german one. My point is that I want to install android on my memory card and also install a normal english rom on my phone. Can anyone suggest me what radio, stock rom and anything else do I have to install.
Currently this is what I have:
rom 3.14.162.5 04666 ger
manilla 2.5.20181527.1
radio 2.15.50.14
Also this rom has vodafone splash screen and installed vodafone apps.
To summarise my post:
How can I make my phone in english (change the stock rom)?
What do I need to do to make it ready for Android?

bootloader
usb
hspl4
choose 3.03.hspl
bootloader
usb
run 3.14 wwe rom install
rom and radio should be fine for android.

I just checked and it says that I have SPL 3.03.0000 XE
everything in the bootloader is the following:
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
So should I flash HSPL ?

That's why I said to.
See the 3.03.0000? Well whenever it ends. 0000,,,that's a stock spl. Once hspl is installed it ends .hspl, not. 0000

Thanks.
Sorry for asking so noob questions, but I bricked it once and I'm being causious now.

samsamuel said:
That's why I said to.
See the 3.03.0000? Well whenever it ends. 0000,,,that's a stock spl. Once hspl is installed it ends .hspl, not. 0000
Click to expand...
Click to collapse
Just learnt something thank-you
Sent from my HTC HD2 using XDA Premium App

[Q] is this stock htc hd2??

hey guys, i had (and still have) a non responding touchscreen on my htc hd2. I am now trying to get it back to stock to send it in, cause it still has warranty...
anyway, i downloaded winmob6.5 from the htc side, its a vodafone branding, so i downloaded the one where it says vodafone=) its a phone from germany.
I did task 29, and then installed the rom. (phone still had 2.08HSPL). afterwards i installed 2.08 SPL with hd2 toolkit.
The phone now reads:
PB81100 HX-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MircoP(TOUCH) 0x50
in bootloader and:
R 2.15.50.14
G 15.42.50.11U
D 3.14.04666
when starting up.
my questions now are:
IS THIS ABLE TO BE SENT IN?
DO I HAVE TO CHANGE THE RADIO? IF SO,WHICH ONE?
ANYTHING I HAVE TO DO DIFFERENT TO MY WAY OF TRYING TO GET IT BACK TO STOCK??
help would be so much appreciated guys!
thanks in advance
(i posted this in the question and answer forum before, but no response, so im trying again here, cause i really dont wanna loose that phone for nothing...)

I think you have to change your SPL to either 3.03, 1.66 or anything other than 2.08.
Because as far as I know, that SPL you have is for T-mous only, having it on means you've "HSPL-ed" your device, and since your device is not a T-Mous .....
I'm not sure about the above, wait for someone more experienced to confirm.

wAVe4s said:
hey guys, i had (and still have) a non responding touchscreen on my htc hd2. I am now trying to get it back to stock to send it in, cause it still has warranty...
anyway, i downloaded winmob6.5 from the htc side, its a vodafone branding, so i downloaded the one where it says vodafone=) its a phone from germany.
I did task 29, and then installed the rom. (phone still had 2.08HSPL). afterwards i installed 2.08 SPL with hd2 toolkit.
The phone now reads:
PB81100 HX-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MircoP(TOUCH) 0x50
in bootloader and:
R 2.15.50.14
G 15.42.50.11U
D 3.14.04666
when starting up.
my questions now are:
IS THIS ABLE TO BE SENT IN?
DO I HAVE TO CHANGE THE RADIO? IF SO,WHICH ONE?
ANYTHING I HAVE TO DO DIFFERENT TO MY WAY OF TRYING TO GET IT BACK TO STOCK??
help would be so much appreciated guys!
thanks in advance
(i posted this in the question and answer forum before, but no response, so im trying again here, cause i really dont wanna loose that phone for nothing...)
Click to expand...
Click to collapse
+1 to what Marvlesz said, the SPL version needs to be 3.03. I think 1.66 is only stock for the older ROMs with .51 radios, but on ROM version 3.14 the correct SPL is definitely 3.03.

Aren't HSPLs replaced to stock ones (SPLs) when installed signed rom? For example stock HD2 has SPL 3.03. You install 2.08 HSPL After fun with Android you flash stock rom. All changes caused by flashing Android and HSPL are restored to defauld SPL 3.03 That's what I think and remember. Check that.
If not, then download http://forum.xda-developers.com/showthread.php?t=966228 this and flash SPL 3.03

kubekpop said:
Aren't HSPLs replaced to stock ones (SPLs) when installed signed rom? For example stock HD2 has SPL 3.03. You install 2.08 HSPL After fun with Android you flash stock rom. All changes caused by flashing Android and HSPL are restored to defauld SPL 3.03 That's what I think and remember. Chech that.
Click to expand...
Click to collapse
Yes, you are correct. But if you re-read his post, you'll notice that he said he had installed SPL using the NAND toolkit, which gave him (or he chose) SPL 2.08 (only for T-mous).
Whereas flashing his "original" stock ROM via sdcard would've definitely restored his device back to complete stock.

first of all: thanks guys!
@kubekpop i downloaded hspl4 from DFT and installed hspl 3.03.
the phone now reads:
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
in bootloader and
R 2.15.50.14
G 15.42.50.11U
D 3.14.04666
when starting up.
What do you guys reckon? ready to be sent in? what about the radio - leave it?
@Marvlesz, I didnt install from SD because i dont have a touchscreen nomore. and i though installing the original RUU via MAGLDR doesnt make sence? so thats why i just plugged it in the pc and started it from there=)
cheers

Yep, that's fine now

But installation from SD doesn't need touchscreen. You just need nbh file (you can take it from temp files after running installer on PC - while it is still running search on drive C:/ [or other system partition] file ruu_signed.nbh And this should be in temp), formated SD without any partitions other than Fat32 (one). You rename ruu_SIGNED.nbh to leoimg.nbh and put it in SD. And via bootloader. But this what you have is enough

yeah nice, ill send it in on wednesday then.... Thanks again guys!
@kubekpop, well thats good to know, but if my phones is ready to be send in like this, ill just leave it that way=) thanks though!