Database Users

Urgently need to revert to stock HSPL

Guys,
Help me out ASAP please.
I have an HD2 which screen isn't working and need to give for repair.
The problem is I already flashed Energy ROM and now I need to revert back to stock ROM.
I have reflashed my drive to shipped ROM, but when I go to the boot loader (Vol down power) I get the following:
PB81100 HX-BC
SPL-1.42.HSPL XE
0x05
CotullaHSPL 0x30
I don't think that is the stock HSPL, or whatever its name is. How do I get my device back to stock situation??? I must give the device tomorrow for repair so I really don't have any time. Have to do it ASAP.
Thanks

mobiler said:
Guys,
Help me out ASAP please.
I have an HD2 which screen isn't working and need to give for repair.
The problem is I already flashed Energy ROM and now I need to revert back to stock ROM.
I have reflashed my drive to shipped ROM, but when I go to the boot loader (Vol down power) I get the following:
PB81100 HX-BC
SPL-1.42.HSPL XE
0x05
CotullaHSPL 0x30
I don't think that is the stock HSPL, or whatever its name is. How do I get my device back to stock situation??? I must give the device tomorrow for repair so I really don't have any time. Have to do it ASAP.
Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=609477
Check the link above, and read.

run hspl2 and choose 1.42.0000

That's odd, coz when you flash a stock ROM via SD-Card it practically overwrites everything in the cellphone (including SPL, Radio, bootscreen) to stock values..
Anyway in case you flashed the stock ROM using the customruu utility, just launch hspl3 again---> select SPL 1.42.0000 from the drop down list----> flash that and you should be good to go.

MartinXDA said:
just launch hspl3 again---> select SPL 1.42.0000 from the drop down list----> flash that and you should be good to go.
Click to expand...
Click to collapse
hspl2, , ,, hspl3 doesnt have 1.42.0000 as an option.

samsamuel said:
hspl2, , ,, hspl3 doesnt have 1.42.0000 as an option.
Click to expand...
Click to collapse
yeah right..sorry 'bout that.

Thanks. You guys are great.

Return HD2 Back to Stock

My touch screen decided to take a crap on me. Tmobile is sending me a replacement in the mail which should be here in about 5-7 days.
I just need some help returning the phone back to stock. I already removed ChunkyRom using Task29. Then booted the phone to the bootloader to flash the updated Tmobile rom. Now when I boot this is what the screen shows.
PB81120 SS-B3
SPL-2.08 HSPL 8g XE
0x05
CotullaHSPL 0x40
My dad has the same phone (completely stock) and this is what his shows:
pb8 ss-b3
spl-2.10.0000 8g xe
microP(LED) 0x05
MicroP(Touch) 0x40
So I am not sure. I just dont want tmobile to charge my account. Thank you for the advice. I tried to follow some of the posts already on this amazing forum but I wasnt having any luck. I promise I tried to search!

Yeh I am having the same exact problem...My screen just stopped working out of no where and now I need to revert back to original rom radio and hspl...anyone got a link or instructions?

kplonsky said:
My touch screen decided to take a crap on me. Tmobile is sending me a replacement in the mail which should be here in about 5-7 days.
I just need some help returning the phone back to stock. I already removed ChunkyRom using Task29. Then booted the phone to the bootloader to flash the updated Tmobile rom. Now when I boot this is what the screen shows.
PB81120 SS-B3
SPL-2.08 HSPL 8g XE
0x05
CotullaHSPL 0x40
My dad has the same phone (completely stock) and this is what his shows:
pb8 ss-b3
spl-2.10.0000 8g xe
microP(LED) 0x05
MicroP(Touch) 0x40
So I am not sure. I just dont want tmobile to charge my account. Thank you for the advice. I tried to follow some of the posts already on this amazing forum but I wasnt having any luck. I promise I tried to search!
Click to expand...
Click to collapse
Pivo99 said:
Yeh I am having the same exact problem...My screen just stopped working out of no where and now I need to revert back to original rom radio and hspl...anyone got a link or instructions?
Click to expand...
Click to collapse
Download your official stock rom. Extract it to get the nbh file. Rename that nbh to LEOIMG.nbh. Copy it to your SDcard, and flash in bootload mode. This should reverse your HSPL back to spl

10507 said:
Rename that nbh to LEOIMG.nbh. Copy it to your SDcard, and flash in bootload mode. This should reverse your HSPL back to spl
Click to expand...
Click to collapse
This is the part where I am confused. I renamed the file to LEOIMG.nbh but I dont have a clue how to flash it when I am in the bootloader mode.

you not seached for the million and 1 posts about how to return to stock???if its copied right, instead of boot loader it will have LEOIMG to install..search to do it right

Well I formatted my SD card to FAT32 and put the LEOIMG.nbn on the sim card. Boot the phone to the bootloader and it doesn't automatically go to the other screen that is needed to flash the phone.

This is all you have to do..
This is all you have to do:
1. Download HSPL3_PKG, don't ask where, google it!
2. Extract and run as if you were going to flash the HSPL, hit next on first screen, now you get a drop down list, select 2.08.0000 not 2.08.HSPL.
3. Run the program and tarraaaaa.
4. NOw just flash your stock rom the normal way and not from sd since it still didn't work for me after removing HSPL.

fmedrano1977 said:
This is all you have to do:
1. Download HSPL3_PKG, don't ask where, google it!
2. Extract and run as if you were going to flash the HSPL, hit next on first screen, now you get a drop down list, select 2.08.0000 not 2.08.HSPL.
3. Run the program and tarraaaaa.
4. NOw just flash your stock rom the normal way and not from sd since it still didn't work for me after removing HSPL.
Click to expand...
Click to collapse
Here is HSPL3_PKG

Is my HD2 back to stock ?
Hi, after reading loads of posts on this forum I think I managed to put my phone back to stock as I need to return it to HTC.
I had HSPL with some custom rom.
Here are the details from my phone after removing HSPL and Cusrom ROM:
With volume down:
PB81100HX-BC
SPL-1.42.000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x30
Installed rom
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
I will appreciate if anyone can tell me if this is a Stock HD2.
Thanks !

mario_250r said:
Hi, after reading loads of posts on this forum I think I managed to put my phone back to stock as I need to return it to HTC.
I had HSPL with some custom rom.
Here are the details from my phone after removing HSPL and Cusrom ROM:
With volume down:
PB81100HX-BC
SPL-1.42.000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x30
Installed rom
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
I will appreciate if anyone can tell me if this is a Stock HD2.
Thanks !
Click to expand...
Click to collapse
Yes you are back to stock

I finally got mine to read :
PB81120 HX-B3
SPL-2.08.0000 8G XE
MicroP(LED)
MicroP(TOUCH)
Is this stock for a tmobile HD2 bought in north america?

GutterFaceMobile said:
I finally got mine to read :
PB81120 HX-B3
SPL-2.08.0000 8G XE
MicroP(LED)
MicroP(TOUCH)
Is this stock for a tmobile HD2 bought in north america?
Click to expand...
Click to collapse
If you have the 3.10 stock ROM then yes that is correct, but if you have the 3.14 stock ROM you need SPL 3.03.0000.
I like the pic for your avatar too by the way.

Help restoring htc hd2 to factory condition after mgldr. Android install
HI, Im new here and im really in need of help restoring my htc hd2 tmobile to factory condition so i can return it for warranty replacement because my screen is not responding at all.
Thanks and more power

This is hat mine shows up.
This is what mine shows up
PB81120 HX-B3
SPL-2.10.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x04
Is this already been restored to stock so i can return it for warranty exchange..I updated the rom from TMobile site 3.14 version..
Thanks so much.

blue_pirate said:
This is what mine shows up
PB81120 HX-B3
SPL-2.10.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x04
Is this already been restored to stock so i can return it for warranty exchange..I updated the rom from TMobile site 3.14 version..
Thanks so much.
Click to expand...
Click to collapse
Yes. All SPL xx.0000 is a stock SPL

T-Macgnolia said that if you have 3.14 rom you need SPL 3.03.0000 to make it a stock version, but mine is SPL-2.10.000 and 3.14 rom, if i return it for warranty exchange are they gonna find out that i hacked it and restored it back?
Thanks

blue_pirate said:
T-Macgnolia said that if you have 3.14 rom you need SPL 3.03.0000 to make it a stock version, but mine is SPL-2.10.000 and 3.14 rom, if i return it for warranty exchange are they gonna find out that i hacked it and restored it back?
Thanks
Click to expand...
Click to collapse
Yea I've mentioned this several times, that the tmous 3.14 doesn't seem to update the spl. Its not a problem because it will run happily on spl 2, unlike regular hd2 which will not run 3.14 on anything less than spl 3.03.

samsamuel said:
Yea I've mentioned this several times, that the tmous 3.14 doesn't seem to update the spl. Its not a problem because it will run happily on spl 2, unlike regular hd2 which will not run 3.14 on anything less than spl 3.03.
Click to expand...
Click to collapse
Thanks so much for the info, im new to HTC HD2 hacking and i really appreciate all the infos and help..

Cant remove my ROMs...

i cant flash my HD2 any ROMs or NAND or eaven run task29 all rom flash just stuck to 0% and then comes USB connection error or something else. Im stuck whit energy rom i downloaded a while a go. I use radio 2.15.50.14 and HSPL4 but i shows spl-2.08. When i try flash or use task29 to clean my phone nothing happens.. What should i need to do to make me able to run NAND .... Thanks!!!

but I shows spl 2.08
Click to expand...
Click to collapse
...... yes, go on, the rest of that number is?...
Cos if it says 2.08.0000 then that's stock and wont allow flashing.

yes, this is all thet read on security unlocked / boot ? menu
PB81*** HX-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30

would it help to install some different hspl / spl like 3/4 that u have linked? would those allow me to flash ROMs again? or how would i be able to do those? Thanks!

it will not only help, it is the only way, since your spl says 2.08.0000 which is stock meaning you DO NOT have hspl installed. Just because you used hspl program to set 2.08.0000, you have installed a stock spl, NOT hspl, so yes, use any hspl (2,3 or 4, doesnt really matter) to change your spl to 2.08.hspl.

[Q] Flashing a german HD2 with a stock rom

Hello,
I had my phone repaired where they changed its motherboard so now instead of being with an english WWE rom it has a german one. My point is that I want to install android on my memory card and also install a normal english rom on my phone. Can anyone suggest me what radio, stock rom and anything else do I have to install.
Currently this is what I have:
rom 3.14.162.5 04666 ger
manilla 2.5.20181527.1
radio 2.15.50.14
Also this rom has vodafone splash screen and installed vodafone apps.
To summarise my post:
How can I make my phone in english (change the stock rom)?
What do I need to do to make it ready for Android?

bootloader
usb
hspl4
choose 3.03.hspl
bootloader
usb
run 3.14 wwe rom install
rom and radio should be fine for android.

I just checked and it says that I have SPL 3.03.0000 XE
everything in the bootloader is the following:
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
So should I flash HSPL ?

That's why I said to.
See the 3.03.0000? Well whenever it ends. 0000,,,that's a stock spl. Once hspl is installed it ends .hspl, not. 0000

Thanks.
Sorry for asking so noob questions, but I bricked it once and I'm being causious now.

samsamuel said:
That's why I said to.
See the 3.03.0000? Well whenever it ends. 0000,,,that's a stock spl. Once hspl is installed it ends .hspl, not. 0000
Click to expand...
Click to collapse
Just learnt something thank-you
Sent from my HTC HD2 using XDA Premium App

[Q] is this stock htc hd2??

hey guys, i had (and still have) a non responding touchscreen on my htc hd2. I am now trying to get it back to stock to send it in, cause it still has warranty...
anyway, i downloaded winmob6.5 from the htc side, its a vodafone branding, so i downloaded the one where it says vodafone=) its a phone from germany.
I did task 29, and then installed the rom. (phone still had 2.08HSPL). afterwards i installed 2.08 SPL with hd2 toolkit.
The phone now reads:
PB81100 HX-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MircoP(TOUCH) 0x50
in bootloader and:
R 2.15.50.14
G 15.42.50.11U
D 3.14.04666
when starting up.
my questions now are:
IS THIS ABLE TO BE SENT IN?
DO I HAVE TO CHANGE THE RADIO? IF SO,WHICH ONE?
ANYTHING I HAVE TO DO DIFFERENT TO MY WAY OF TRYING TO GET IT BACK TO STOCK??
help would be so much appreciated guys!
thanks in advance
(i posted this in the question and answer forum before, but no response, so im trying again here, cause i really dont wanna loose that phone for nothing...)

I think you have to change your SPL to either 3.03, 1.66 or anything other than 2.08.
Because as far as I know, that SPL you have is for T-mous only, having it on means you've "HSPL-ed" your device, and since your device is not a T-Mous .....
I'm not sure about the above, wait for someone more experienced to confirm.

wAVe4s said:
hey guys, i had (and still have) a non responding touchscreen on my htc hd2. I am now trying to get it back to stock to send it in, cause it still has warranty...
anyway, i downloaded winmob6.5 from the htc side, its a vodafone branding, so i downloaded the one where it says vodafone=) its a phone from germany.
I did task 29, and then installed the rom. (phone still had 2.08HSPL). afterwards i installed 2.08 SPL with hd2 toolkit.
The phone now reads:
PB81100 HX-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MircoP(TOUCH) 0x50
in bootloader and:
R 2.15.50.14
G 15.42.50.11U
D 3.14.04666
when starting up.
my questions now are:
IS THIS ABLE TO BE SENT IN?
DO I HAVE TO CHANGE THE RADIO? IF SO,WHICH ONE?
ANYTHING I HAVE TO DO DIFFERENT TO MY WAY OF TRYING TO GET IT BACK TO STOCK??
help would be so much appreciated guys!
thanks in advance
(i posted this in the question and answer forum before, but no response, so im trying again here, cause i really dont wanna loose that phone for nothing...)
Click to expand...
Click to collapse
+1 to what Marvlesz said, the SPL version needs to be 3.03. I think 1.66 is only stock for the older ROMs with .51 radios, but on ROM version 3.14 the correct SPL is definitely 3.03.

Aren't HSPLs replaced to stock ones (SPLs) when installed signed rom? For example stock HD2 has SPL 3.03. You install 2.08 HSPL After fun with Android you flash stock rom. All changes caused by flashing Android and HSPL are restored to defauld SPL 3.03 That's what I think and remember. Check that.
If not, then download http://forum.xda-developers.com/showthread.php?t=966228 this and flash SPL 3.03

kubekpop said:
Aren't HSPLs replaced to stock ones (SPLs) when installed signed rom? For example stock HD2 has SPL 3.03. You install 2.08 HSPL After fun with Android you flash stock rom. All changes caused by flashing Android and HSPL are restored to defauld SPL 3.03 That's what I think and remember. Chech that.
Click to expand...
Click to collapse
Yes, you are correct. But if you re-read his post, you'll notice that he said he had installed SPL using the NAND toolkit, which gave him (or he chose) SPL 2.08 (only for T-mous).
Whereas flashing his "original" stock ROM via sdcard would've definitely restored his device back to complete stock.

first of all: thanks guys!
@kubekpop i downloaded hspl4 from DFT and installed hspl 3.03.
the phone now reads:
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
in bootloader and
R 2.15.50.14
G 15.42.50.11U
D 3.14.04666
when starting up.
What do you guys reckon? ready to be sent in? what about the radio - leave it?
@Marvlesz, I didnt install from SD because i dont have a touchscreen nomore. and i though installing the original RUU via MAGLDR doesnt make sence? so thats why i just plugged it in the pc and started it from there=)
cheers

Yep, that's fine now

But installation from SD doesn't need touchscreen. You just need nbh file (you can take it from temp files after running installer on PC - while it is still running search on drive C:/ [or other system partition] file ruu_signed.nbh And this should be in temp), formated SD without any partitions other than Fat32 (one). You rename ruu_SIGNED.nbh to leoimg.nbh and put it in SD. And via bootloader. But this what you have is enough

yeah nice, ill send it in on wednesday then.... Thanks again guys!
@kubekpop, well thats good to know, but if my phones is ready to be send in like this, ill just leave it that way=) thanks though!