Related
I think it's taken a knock and now it won't boot. I just get a white screen. If I try a hard reset it gives me the text that I'll wipe all personal settings etc.
I've flashed to a duttys ROM and a 2.x.50.x radio and I'm on O2. Is there any way I can fix this as I'm guessing the ROm update voided the warrenty. As the Hard reset shows text I can see something is working but even plugging it into my PC via USB gets no response.
If anyone can help it would be a major relief.
Let it do the hard reset and see what happens. So you'll lose what ever MMS/SMS you didn't delete, the programs you have loaded since putting the ROM on, etc etc. Your not going to lose all your numbers unless they are stored on the actual phone and not the SIM card.
You could try doing a task29 on it and see if that helps. As for the warranty being voided it just depends on whether or not it can be wiped and loading with a OEM ROM back onto it with the correct HSPL before sending it back. You haven't bricked it if you can get into bootloader or hard reset.
I have tried the hard reset but no joy. It runs the reset but then on boot back to white screen. I'm not fussed about the contacts etc as it's all backed up. Have removed the SD card too.
Do a task29 on it. Flash a new radio and ROM(would suggest OEM) and then get back to us. Worst case something got knocked loose inside and it needs to go to HTC for repair.
craigpyro said:
I have tried the hard reset but no joy. It runs the reset but then on boot back to white screen. I'm not fussed about the contacts etc as it's all backed up. Have removed the SD card too.
Click to expand...
Click to collapse
i've encountered this lately for some strange reason ( being a flash junky) but found my way out of it.
flash your stock ROM via sdcard method, this will reset the spl to the original. (you can easily flash hspl anyway afterwards when you tire of the stock rom).
Ignore my post below. Have drained the battery overnight and this morning have been able to boot to:
PB81100 HX-BC
SPl-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x30
SERIAL
From here I'm hopeful I can do something.
_______________________________________________________________________________________________________
Sorry guys - but I don't understand how I am meant to do a task29 or ROM via SD card method when I cannot link by USB/ActiveSync or see anything on the screen.
craigpyro said:
....
Sorry guys - but I don't understand how I am meant to do a task29 or ROM via SD card method when I cannot link by USB/ActiveSync or see anything on the screen.
Click to expand...
Click to collapse
The microSD method does not require your phone to connect to the computer.
Here from the newbie guide to flashing a ROM:
Download a shipped Rom from *HERE*
- Rename the extension to .zip
- open it with winzip and extract the RUU_signed.nbh file to a folder
- Rename it to LEOIMG.nbh and copy it to the root of a microSD card thats been formatted to FAT32
- Insert your storage card into your phone
- Enter Bootloader and follow onscreen instructions to flash
This flashes your phone back to warranty status - it replaces the HardSPL, the ROM and the Radio.
Once your phone is repaired, you can always HardSPL your phone again.
I've tried using the HSPL tool to re-install back to 1.41 and other SPLs. The application says it's successful but when I restart the bootloader still reads:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x30
have tried Flashing ROMs and running Task29. Everytime the Bootloader switches to the updating progress bar then crashes out to Error [262].
I dont have a card reader to try from the SD card but even if I did I'm starting to feel doubtful.
are you sure, that the radio is compatible with the rom?
i'm pretty sure its the same fail.
DN41
OK - booting from FAT32 formatted microSD.
Stock ROM failed
Radio_2.08.50.05 failed
maybe a corrupt image file ? try downloading another one and see if that helps
I've tried 2 images. They get to different points at the radio install then fail. Try to get another img.
Starting to despair a little now. Trying to get just the radio on to start with.
This radio installs up to 100% (instead of about 20%) then reads:
00018003
LEOIMG.nbh - FAIL
Radio_V2Fail
Update Terminate
UPDATE FAIL
I really am getting desperate now having spent almost all day working on this.
Try using the supplied 2GB microSD card that came with the phone. Sometimes there are problems with using larger cards.
Thanks for the idea however I'm using a spare 1GB.
Silly question, but it is an O2 original ROM (assuming that is what your phone originally had on it) you downloaded and are flashing and not an HTC stock ROM (ie 1.66 WWE)?
I have tried both.
I am on the same issue here. Have read almost anything i could find to fix this. Am able to change spl through hspl2 successfully but showing the same spl 1.42 hspl in bootloader. The thing is only unable to flash radio. I can flash a custom rom with sd card but after flashing when it boot up only a white screen is showing. When i try to install a official stock rom it shows that the radio v2 not installed successfully. So its probably radio problem. Hope some one could help us fix this. I tried installing a radio with the sd card and still gets the radio v2 fail. Tried installing custom rom and radio with the usb but doest go beyond 0% and error shown in the pc. HELP HELP HELP
craigpyro said:
Starting to despair a little now. Trying to get just the radio on to start with.
This radio installs up to 100% (instead of about 20%) then reads:
00018003
LEOIMG.nbh - FAIL
Radio_V2Fail
Update Terminate
UPDATE FAIL
I really am getting desperate now having spent almost all day working on this.
Click to expand...
Click to collapse
With the steps I describe here I was able to recover the device.
http://forum.xda-developers.com/showthread.php?t=668347
But only if you follow the exact steps!
I tried many stock roms first and all were stuck on the radio.
Only the method I describe worked for me.
Good luck.
for you guys across the pond, don't you have to flash a .51 radio, not a .50 that you were using for the custom ROMs?
9
Hey all,
A friend of mine tried to install android on his HD2.
After installing HSPL it worked fine.
But after flashing MAGLDR the phone gets stuck at the HTC bootscreen.
And I cant get the phone connected to activesync
What did I try:
1. Hard Reset
2. Using a stock rom RUU (ruu_signed.nbh)to flash like this:
a)Formatting the sd card to fat32(16GB)
b)Putting ruu_signed.nbh on the sd card and renaming it to leoimg.nbh.
(I tried the Unbranded and the NLD RUU)
c)Turning phone on with vol down.
After the thrid step (c) I get on a screen that says "Loading..." but after 30 minuts nothing happen.
Anyone! What do I need to do?
Greetz,
Michka
BTW i got my ruu_signed.nbh files from the %temp% folder of the RUU installer.exe
This is what he gets on the tripel color screen.
PB81100 HX-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
The SD card should be freshly formatted, FAT32 format.
It´s not easy to find out what went wrong with MAGLDR.
Did you use the latest version, 1.13?
What HSPL and what Radio ROM version were on the device?
And finally, do you still get into the bootloader screen (vol. down + power),
what does it say in there?
tictac0566 said:
The SD card should be freshly formatted, FAT32 format.
It´s not easy to find out what went wrong with MAGLDR.
Did you use the latest version, 1.13?
What HSPL and what Radio ROM version were on the device?
And finally, do you still get into the bootloader screen (vol. down + power),
what does it say in there?
Click to expand...
Click to collapse
Yes i used the latesd version o MAGLDR,
HSPL 3
Radio dont remember
Yes i can get in the bootloaderscreen.
Well, then please provide as much information as possible.
It´s really hard or even impossible to help without more information.
It´s a bit like: My car is broken. What should I do?
"A stock ROM" is very tight information...
For your reference, flashing through SD card deletes HSPL, that´s why I asked
what the bootscreen information says...
tictac0566 said:
Well, then please provide as much information as possible.
It´s really hard or even impossible to help without more information.
It´s a bit like: My car is broken. What should I do?
"A stock ROM" is very tight information...
For your reference, flashing through SD card deletes HSPL, that´s why I asked
what the bootscreen information says...
Click to expand...
Click to collapse
Oke if someone could help me I will provide some info tomorrow.
(I need to ask my friend cus i havent got the phone in my possesion)
This is what he gets on the tripel color screen.
PB81100 HX-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
Sent from my HTC Wildfire using XDA App
Bump
Sent from my HTC Wildfire using XDA App
See, the information you posted is helpful indeed.
You still have SPL 2.08.0000 on your device instead of 2.08.HSPL. On the other hand, I still don´t know what your original ROM was.
Please try to re-install with HSPL3.exe, and please make sure to install the correct Radio ROM in case you don´t have it yet, should be 2.15.50.14.
Both items are required to run MAGLDR properly.
If your attempt to flash a stock ROM failed, then something else was wrong.
There are known problems flashing with 8GB, or greater, SD Cards.
Put the phone into Bootloader Mode and then connect to the PC.
Run HSPL3 and select 2.08.HSPL
Put the phone into Bootloader Mode and then connect to the PC.
Download and flash the RADIO 2.15.50.14.
Put the phone into Bootloader Mode and then connect to the PC.
Now you are ready to go through the MAGLDR instructions and NANDRIOD flashing.
fred_up said:
There are known problems flashing with 8GB, or greater, SD Cards.
Put the phone into Bootloader Mode and then connect to the PC.
Run HSPL3 and select 2.08.HSPL
Put the phone into Bootloader Mode and then connect to the PC.
Download and flash the RADIO 2.15.50.14.
Put the phone into Bootloader Mode and then connect to the PC.
Now you are ready to go through the MAGLDR instructions and NANDRIOD flashing.
Click to expand...
Click to collapse
Thanks for adding that hint, I keep forgetting this very fact.
I do have the 2GB card which came with the device ready for flashing purposes... it was even my Goldcard at very early stages.
Oke thx for the replies.
I will try it tonight!
Greetz,
Michka
Sent from my HTC Wildfire using XDA App
Thank you guys.
The problem was hspl.
Because of the sd card (i think) hspl wasnt flashed right. So i couldnt install a radio or get magldr working. Now i reinstalled hspl and i can do anything.
So what i did in short:
1. Reinstalled hspl 3.00 with a 2gb sd.
2. Flashed the right radio.
3. So now magldr was working
4. Flashed the nld stock rom(to be 100% sure everyting works).
5. Reflashed magldr 1.03 again.
6. Flashed an android disre hd rom (standard nand rom doesnt seem to work).
7. We are happy everything works.
Thx again!
Sent from my HTC Wildfire using XDA App
Hi all,
I would really appreciate if someone can help me reverse this process. I have an HD2 that i need to restore it back to factory ROM/condition and return it to US T-Mobile. I previously have WP7 on nand, Android on SD, Radio 2.15, with Mgldr 1.13 with HSPL 3.
I followed the procedure for flashing through SD as it will remove the HSPL. So i downloaded the ROM from TmoUS website, renamed the file to LEOIMG.nbh, and put it on a 4gb class 2 (FAT32) card. Enter bootloader mode by holding down volume/power button. Then it said loading and ask if I want to write over the image, select yes ... then it start the process. Though, half way through i receive the error message! Now when i turn the phone on i can't get past the bootloader mode. Just the error message even when I try to flash again via SD (the process doesnt even start - just said "loading" then "not allow" error message). When i get it plugged in to flash via desktop, the device is not recognized by the update utility. I'm not sure what could have gone wrong .. but any help or tips to reverse this process is greatly appreciated.
Thanks guys!!
What does it say in bootloader now?
If i just power it on I get the blank screen that said "error installing rom" with the triangle and the exclamation mark in the middle. If I boot into bootloader mode it will first get to the screen where it said "loading" then shortly it will say "error" and "not allow" then take me back to the bootloader mode. though, I noticed that the SPL is now 3.03 instead of 2.08 .. but other than that, I couldnt find a way to flash it by SD or USB. Any suggestion on this? Thanks for your help Macgnolia!
Sounds like it flashed the correct SPL and may be failing on the ROM flash, it sounds like it may be flashing the correct radio too.
What I would do is keep your phone completely off for about 3 hours, then turn it back on into bootloader, then try the flash again.
It might have some random overheat thing going on or something. Since you're back to stock SPL, go ahead and flash via RUU instead of SD and see if that does anything, it should let you since it's a stock ROM you're flashing.
Yeah I am with Orangekid here it might help to let your HD2 rest for a while so the internal temp is reduced as it my be some kind of freak heat issue right now. The HD2 hates heat incase you did not know this. I would still like to know what the top line of your bootloader says so we will know if you have the right device I.D. and that you are not one of the unlucky people to get a their device I.D. mysteriously screwed up by a stock ROM flash.
I'm at work and can't really play with it but definitely I will try it again jz to see if its the heat issue. Also, you think it could be the issue with the card by any chance? I was reading on flashing with SD and there were some conflicting opinions about the class and format for SD. And this is my wifes hd2 .. she'll probably freak out .. hehehe ... Thanks guys '-)
Sent from my HTC HD2 using XDA App
qdochemistry said:
I'm at work and can't really play with it but definitely I will try it again jz to see if its the heat issue. Also, you think it could be the issue with the card by any chance? I was reading on flashing with SD and there were some conflicting opinions about the class and format for SD. And this is my wifes hd2 .. she'll probably freak out .. hehehe ... Thanks guys '-)
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
card shouldn't matter as long as it's 8gb or less from my experience. Once it's off for a few hours just try to reflash stock via RUU and see what happens.
And yeah, go ahead and load up bootloader first to see what the top line says.
I just tested it again .. same problem! at the top right corner it says "RUUNBH" then the series of lines in the red portion of the screen as follows:
PB81120 SS-B3
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Upgrade ROM code error
Please try again
and if I just power it on it goes to the error message .. then "loading" screen .. then "error" .. then "not allow" .. then back to bootloader mode but the third line now say MicroP-Wrong Platform (0x0)
any suggestion guys??
I thought it might have been that the download rom was corrupted .. went to tmo and download another one .. I tried to flash again .. get from bootloader mode .. then to loading mode .. and just stuck there ..
qdochemistry said:
I thought it might have been that the download rom was corrupted .. went to tmo and download another one .. I tried to flash again .. get from bootloader mode .. then to loading mode .. and just stuck there ..
Click to expand...
Click to collapse
Have you try with different micro sd card?
battery pin check, whether it is bent.
Battery capacity should at least 50%
Did you rename the RUU_signed.nbh to leoimg.nbh?
When you transfer it to sd card, did you using card reader?
Anything is possible. Please take a look of the above check list
I'd be tempted to try a full change of spl, use hspl4 to drop spl from 3.03.0000 down to 2.08.0000 or 2.10.0000, then try first the 2.13 rom and then the 3.14 rom over USB again.
samsamuel said:
I'd be tempted to try a full change of spl, use hspl4 to drop spl from 3.03.0000 down to 2.08.0000 or 2.10.0000, then try first the 2.13 rom and then the 3.14 rom over USB again.
Click to expand...
Click to collapse
Done!! THANK YOU!!!!!
For some odd reasons, my laptop (win7 ultimate) always seems to have connection issues even with chevron for wp7. I plugged it in to my wife's laptop (vista ultimate) and it connects. I was reading your comment on a similar issue in another thread and along with your suggestion here .. I figured it must be HSPL issue. I first used HSPL4 to reinstall 2.08 and immediately mgldr popped up. Then i flash the Tmo stock ROM over it. Then use HSPL4 to flash over (twice) with 3.03 (the one without the HSPL).
It took away the Energy boot screen, now I'm on 3.14 with 2.15 radio. I checked bootloader and it saids the following:
PB81120 SS-B3
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Which is a problem because I checked on the refurbished device they sent and it has SPL 2.10. And so, I put HSPL 3.03 back on there to flash via SD again. Now i run into the same problem I orginally did .. about 20% into the update process and it stops and said update error. Could this be something obvious that I'm doing wrong? and also is there a way to get spl 2.10 without SD flash??
Thanks bud
Edit: I did it again a couple times via SD and it worked! I checked bootloader and it said spl 2.10 so I guess everything is back to stock now. I guess I'm gonna throw it back in the box and send it off. Thank you everyone for the fast reply and for all the help on this issue ... you guys are awesome! Thanks
Before I succesfully flashed Custom Windows Rom and had Android in my SD card root folder. I also flashed HSPL and MAGLDR113 and CWM Recovery v3.2 trying to install Nexus. But I couldn't copy the Nexus...rar file cause I didn't locate the file on the computer.
So I decided to flash back to original ROM for my HD2.
I copied LEOIMG.nbh to SD card but then it said "File cannot be located" so basically it partially copied and when I rebooted my phone and it showed white screen with a message of an update. I cancelled update but nothing happened it just came back to the same message and tried to update software but it failed.
So now I stuck in tri-color bootloader with a message:
SS-B3
SPL-2.10.0000 8G XE
MicroP(LED) 0x05
MicroP(Touch) 0x40
I doesn't even read the card any more so I CANT DO ANYTHING!!
What's weird too when I checked SPL version it was 2.08 but now it's 2.10.
WTF is going on? Can anybody tell me? Is it fixable at all?(((
Ok this is what I would do, I would back up my SD card on my computer. Then I would do a full reformat of my SD card with Fat 32. then re download the Windows Mobile stock ROM for your HD2 and copy it to the re formatted SD card. I would only have the ROM on my SD card and then put it in my HD2 and boot it up into bootloader.
The ROM you tried to flash is what changed your SPL to 2.10.0000. Cause the SPL flashes before the ROM does. So that means it was something wrong with the ROM and it could not flash it.
Yeeeeaaaaayyyy!
I fixed it, man!
What I've missed is to launch bootloader pressing down button, then it showed USB mode at the bottom, after that I could flash stock ROM to my HD2!!!
Now it's all good.
The only thing I wonder now: what HSPL should I flash?
Is HSPL 2.08 still ok?
zandulya said:
I fixed it, man!
What I've missed is to launch bootloader pressing down button, then it showed USB mode at the bottom, after that I could flash stock ROM to my HD2!!!
Now it's all good.
The only thing I wonder now: what HSPL should I flash?
Is HSPL 2.08 still ok?[/QUOTE
You must have flashed a official update for your HD2 so I would say yes cause you are still on official stock software. But I still suggest you do a little double checking to see that the ROM you have is a ROm that was released for your specific HD2.
Click to expand...
Click to collapse
Thanks!!
Yep, I don't remember what link I used but I put in my IMEI so it referred me to a particular rom!
Back on track now testing some new ROMs.
Do u have any suggestions for Android ROMs?
Hello to you all,
I have some sort of the same problem. First my original windows 6.5 did not start up any more. That made me look on the internet to see what options there where to fix it. After finding a lot of options I choosed to install android on my system. That worked for a long time but unfortunately it also hung itself up. As a reaction I tried a hard reset and it looks like that was fatal for my phone because I cannot install anything anymore. The only thing I can come in is bootloader menu but when I want to install anything, it stops before finishing.
Is there someone who can help me with this problem? By forehand thanks!
Kind regards,
Jaimy
Hello everyone, I was trying to install new rom by using hd2 toolkit, first I did a task29 then I flashed radio. I mixed the steps and installed hspl, so after that I am not able to install anythink on my phone. First I tried installing Magdlr but it wouldn't passed 0%, then I tried task29 again and 0% again. Then I think the problem would be hd2 toolkit but no, I tried task29 standalone and no work, flashing a radio rom and no work. What can I do now? Thanks in advance..
ejjjjj said:
Hello everyone, I was trying to install new rom by using hd2 toolkit, first I did a task29 then I flashed radio. I mixed the steps and installed hspl, so after that I am not able to install anythink on my phone. First I tried installing Magdlr but it wouldn't passed 0%, then I tried task29 again and 0% again. Then I think the problem would be hd2 toolkit but no, I tried task29 standalone and no work, flashing a radio rom and no work. What can I do now? Thanks in advance..
Click to expand...
Click to collapse
Don't you read things carefully before doing something like this? If you had another phone, there's a chance you could have bricked it by doing something stupid like that.
Are you able to enter the bootloader? What SPL version does it show there? Have you tried flashing a stock ROM via the SD card?
First task29 was completed, then radio rom installed, and then hspl. All done by hd2 toolkit. After that I couldn't able to flash anythink like rom, task29 or else. So my phone only enters when i open it with volume button, else it only displays htc logo.
PB81100 SS-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
I even tried installing stock rom but still no good! It stucks at loading... screen, help me please!!
hi, check the link Below, does it show the same SPL?
nope, mine is SPL-2.08.0000, but I can change it with hspl4, but can't downgrade it!
ejjjjj said:
First task29 was completed, then radio rom installed, and then hspl. All done by hd2 toolkit. After that I couldn't able to flash anythink like rom, task29 or else. So my phone only enters when i open it with volume button, else it only displays htc logo.
PB81100 SS-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Click to expand...
Click to collapse
U mixed up the sequence mate, the guide says that 1st install HSPL then Task29 then Radio.
Did u still have connection between your phone and computer?
if not try hit reset button while holding down the volume key.
yep, i mixed it. i can reset it but without any rom update or any update (it won't pass 0%) it has no meaning to reset the phone. I have connection between computer via usb in bootloader mode only!
If u can connect the phone to your computer via boot loader that's a good new's mate. There's still hope to fix your phone.
So u currently has SPL 2.08 right?
and please check if u has radio ver 2.15.50.14?
if u has both of this and u still cannot install MAGDLR.
I used to has this problem. After i decided to switch to cLK it Fixed everything.
may be u should try too .
U can do it via HD2tool kit. by connect phone to your computer under bootloader mode (the red green white blue screen)
** Dont' for get to chosing cLK partition that's match your ROM requirement **
after install cLK then install Recovery then Flash the ROM.
thamlim said:
If u can connect the phone to your computer via boot loader that's a good new's mate. There's still hope to fix your phone.
So u currently has SPL 2.08 right?
and please check if u has radio ver 2.15.50.14?
if u has both of this and u still cannot install MAGDLR.
I used to has this problem. After i decided to switch to cLK it Fixed everything.
may be u should try too .
U can do it via HD2tool kit. by connect phone to your computer under bootloader mode (the red green white blue screen)
** Dont' for get to chosing cLK partition that's match your ROM requirement **
after install cLK then install Recovery then Flash the ROM.
Click to expand...
Click to collapse
Please, if you don't know exactly what you're talking about don't give out incorrect information. It is NOT possible to install cLK without HSPL, and thus the Task29 won't work either.
@OP, have you tried installing a stock ROM from the SD card? I'm not sure exactly how to do this (see, not giving incorrect info ) but if I'm not mistaken the procedure is to rename the stock ROM to a .zip extension, unzip it, copy RUU_signed.nbh to the SD card and rename it to LEOIMG.nbh, then enter the bootloader and follow the onscreen instructions. However, please check somewhere else that what I've said is correct as well. From here, you can just flash HSPL then MAGLDR, CWM and a zip ROM.
Problem solved, thanks for your answers!