Need some Help.... - HD2 General

I was about to flash a new ROM to my T-Mobile HD2 and decided to install and run Task 29. After doing that my phone stays on the White screen with the pink square that says stick together. I can not get it to get to the bootloader screen and my computer does not recognize that it is linked by USB anymore. I have reset it several times. Any ideas?

yeah this is simple
pull the battery
remove the usb
put battery back on
turn phone on immediatly hold vol down + power(end key)
wait for bootlader screen
insert usb
flash

I tried the above several times and it just does the hard reset and then goes to the stick together screen and doesnt move.

vol up and vol down is hardreset
vol down and end key is bootloader

That fixed it......thanks!

Question answered Thread closed

Related

O2- XDAIIi upgrade

Guy,
Please Help
I was upgrading my XDAIIi to Xda IIi ROM v 1.11.162. during which it show an error message and it just went blank looking closely at the screen showing USB at the top of the screen and the bottom of it has v1.01,
when put on the cradle it showing USB.
I have press the reset botton God knows how many times
Please help someone
Were you trying to upgrade to the rom I posted? With RADIO 1.03 in the filename?
You need to press the power, d-button down and the reset button all together.
Then run the update program again. If it is the original O2 rom then it should work fine from there. If it is the rom I posted then the update will fail initially, just run the program a second time without touching your phone at all.
Hope this helps.
No, I am upgrading from O2 website. I am sorry it not connecting to my pc at all. No sign of life ,
it only display USB on the screen
Try doing a hard reset by holding the power button down and pressing the reset button.
Put it into bootloader by pressing the power, d-button down and the reset button all together and releasing them at the same time. The screen should say SERIAL. Connect it to your PC and the screen should then say USB. Then you should be able to run the update.
If this doesn't work as a last resort try taking the battery out for a while to let the backup run down and start again. Whatever happens the phone needs to go into bootloader mode and a rom applied to get it working again.
Please, which is the D-botton you are refering to
The D button is the "Directional" button, in between the green pickup phone button and the red hang up button.

Tmobile wing stuck on the main screen need help

Hi my tmobile wing that i bought off the craigslist is stuck on the main screen with tmobile and is not going beyond it
can some one please help me how can i make this phone work again
Try a hard reset
(hold down both soft keys and poke the stylus through the hole on the side of the phone under the volume slider)
If that doesn't work, you need to install this :
T-MOBILE STOCK RUU
In order to run this, you'll need to plug your phone to your PC via USB, then go into bootloader mode ... which means you need to hold down the camera button (and keep it down) while you soft reset (poke stylus through hole under volume slider)
When your phone is in bootloader mode, and plugged into USB, it should show "USB" in the corner... once that happens, run that file which will take the phone back to factory settings.
duprade said:
Try a hard reset
(hold down both soft keys and poke the stylus through the hole on the side of the phone under the volume slider)
If that doesn't work, you need to install this :
T-MOBILE STOCK RUU
In order to run this, you'll need to plug your phone to your PC via USB, then go into bootloader mode ... which means you need to hold down the camera button (and keep it down) while you soft reset (poke stylus through hole under volume slider)
When your phone is in bootloader mode, and plugged into USB, it should show "USB" in the corner... once that happens, run that file which will take the phone back to factory settings.
Click to expand...
Click to collapse
Thanks a million for the help now my wing is working again !!!!
duprade said:
Try a hard reset
(hold down both soft keys and poke the stylus through the hole on the side of the phone under the volume slider)
If that doesn't work, you need to install this :
T-MOBILE STOCK RUU
In order to run this, you'll need to plug your phone to your PC via USB, then go into bootloader mode ... which means you need to hold down the camera button (and keep it down) while you soft reset (poke stylus through hole under volume slider)
When your phone is in bootloader mode, and plugged into USB, it should show "USB" in the corner... once that happens, run that file which will take the phone back to factory settings.
Click to expand...
Click to collapse
Ahhh... it's not working, the utiltu says that it can't connect to my phone. What do i do. Is there some thing in settings or some hting that i need to change. PLease help. The stcuk screen is really getting me scared.
Wont Run Bootloader
I have tried holding the camera button and soft resetting multiple times, but it keeps getting stuck on the tmobile screen? What do i do??
After I flashed a ROM for the just clean oven, I had this same problem.
I fixed it (after many hours) by downloading this ROM:
http://www.mediafire.com/?clvw3cvyclo
Entering bootloader (hold in camera button and soft-reset.)
Running the tmobile rom.
It was very strange, it took 3 or 4 tries, but it eventually worked.
I don't understand why, since I did nothing differently, but try it afew times.
Hope you get it up and running soon!
BTW, what are your SLP numbers shown on the bootloader screen?
thx really worked
tryed like 4 times then it worked
PuffyTacos said:
After I flashed a ROM for the just clean oven, I had this same problem.
I fixed it (after many hours) by downloading this ROM:
http://www.mediafire.com/?clvw3cvyclo
Entering bootloader (hold in camera button and soft-reset.)
Running the tmobile rom.
Click to expand...
Click to collapse
...worked for me as well. Now, I'm too chicken to run the Hard SPL.

[Q] phone to pc screen :(

dont kno if im posting this in the correct section or not but can some one plz help? i was trying to flash the stock files for my samsung vibrant with odin, but it froze so i unplugged and tried to reboot my phone but the phone to pc screen came up. ive tried holding the volume buttons + power to get back to download mode, but it just reboots and goes back to it, can anybody help?
Did you hold the power button down till it disappears and then release the power button immediately as it disappears?
hadnt tryin releasing the power button right away but i just tried and still no luck
Johnz is right. To make sure, unplug & plug back in the usb cable, then hold down the volume keys & power, wait till the screen flashes to black, then release power.
Unplug and pull the battery.
Install battery.
While holding both volume buttons, plug in usb cable.
Have odin ready to go, it seems to help. The phone should power up directly to download mode, once odin sees it, hit start.
i dont get what im doing wrong because ive tried what u guys said but after the screen flashes black when it comes back on its the phone to pc screen. ive also noticed that if i pull the battery while the usb cord is connected the phone stays on at that screen until i remove the usb cord, is that normal?
i just read that if the normal ways dont work that means ur phone is hardware locked. looks like im gonna have to try to send it back to tmobile and hope for the best
Try the above, but also hold the home key. I did the exact same as you, and this enabled me to get back to download mode, so I could Odin.
1) Remove battery, SIM, and sd card.
2) Plug in USB Cable.
3) Hold down Vol +/- as well as home.
4) Press power button for 2 seconds, then release.
This should get you into download mode. Then you can Odin back to whatever you were intending to do.
thanx for all the help guys but nothing seems to be working for me
Just throwing out an update incase anyone was wondering, I got my replacement phone yesterday and it turned out to be hardware locked as well. Tried to flash the fix for it and it failed and bricked my phone! So after calling tmobile they will be sending me another replacement and hopefully that one wont be locked as well
I had the same problem trying to get into Download Mode, I got into download mode and using ODIN tried to flash update. The process was stick for 10 min.
So I unplugged USB and got this phone to PC icon. All I had to do to fix it was to go into download mode again by holding both vol +/- keys and pressing power button until screen goes black then release the power button as soon as the screen went black. If you hold the button longer it will go into recovery mode. Then open ODIN again and re-connect USB and ODIN will detect COM port. However you have to make sure that all samsung usb drivers are installed. That is it. Then flash the update and you all set. The phone will reboot and you are back up and runing.
ttabbal said:
Unplug and pull the battery.
Install battery.
While holding both volume buttons, plug in usb cable.
Have odin ready to go, it seems to help. The phone should power up directly to download mode, once odin sees it, hit start.
Click to expand...
Click to collapse
there is another way to this method, that works on any vibrant i've tried it on and also the captivates, had to help a friend restore his yesterday.
remove battery, sd and sim cards
plug in usb cable to pc and phone
hold down the volume buttons only
pop in the battery
if it comes up to the battery charging icon, pull the battery and put it back in again, should go right into download mode.
again, this works on any vibrant i've tried it on, and the captivate as well, good luck.

[Q] WP7 bootloader?

Well, im going back to wm 6.5 so I can reinstall WP7 WITH my sd card so When i do Volume Down+ Power nothing comes up til i remove the power and put it back on and it works
And what´s the question now?
How can I get to the bootloader?
I really need to go back to Wm6.5 so i can reinstall
Wp7 with my SD card so it can get formatted
Keep volume down button pressed while pressing the power button to turn on the phone, to take it into the tricolor screen, if volume down doesn't work try volume up
just do a hard reset, turn off the device, hold down VOL up AND VOL down, whilst holding them tap the power button
oh make sure youre SD card in this time!
or if that doesnt work, boot to MAGLDR (hold down the end call button on the right hand side whilst turning on) go to usb flasher mode, insert USB cable and run the installer from the PC again
you dont need to go back to WM, although some have said it made it more stable, personally i havent seen that.
Ok thanks, I will try that later so if my dad doesn't like it, i can revert back!

Galaxy A40 infinite loop - impossible to turn on

Hi!
I have a problem with a galaxy a40 device, I flashed a stock ROM with Odin, everything went fine, green lights, PASS and all, but now the device just won't go pass the SM logo anymore. When I turn on, logo appears 2-3 secs I get a warning of the unlocked BL then logo comes back and after a second the phone restarts itself and the same goes on forever ( well about several hours, and after that it just shuts off somehow ). I cannot enter recovery mode or download mode at all. I keep pressing the combinations Power + Vol Down, Power + Vol Up, All three and every combinations I have just found on the internet so far. Odin doesnt recognize the phone, which is not a surprise since it won't start up. I have tried with adb but waiting for device is all I get.
How is it even possible that I cannot enter download mode at all? There was no problem with the physical keys, and the power still works, I cannot test the Vol buttons tho.
Has anyone ever had a problem like this? How can I come back from this? Is there a way to flash a ROM without download mode or turned off phone?
Thanks for any help!!
The download mode for this model is different from previous Samsung's :
IIRC, with the phone off, you need to hold VolumeUp and VolumeDown, then plug in the USB cable connected to a computer (you may need to press Power to power up the phone, I can't recall properly).
From there, you should be able to restore a stock ROM with Odin.
Let us know if it helped !
gmarko247 said:
Hi!
I have a problem with a galaxy a40 device, I flashed a stock ROM with Odin, everything went fine, green lights, PASS and all, but now the device just won't go pass the SM logo anymore. When I turn on, logo appears 2-3 secs I get a warning of the unlocked BL then logo comes back and after a second the phone restarts itself and the same goes on forever ( well about several hours, and after that it just shuts off somehow ). I cannot enter recovery mode or download mode at all. I keep pressing the combinations Power + Vol Down, Power + Vol Up, All three and every combinations I have just found on the internet so far. Odin doesnt recognize the phone, which is not a surprise since it won't start up. I have tried with adb but waiting for device is all I get.
How is it even possible that I cannot enter download mode at all? There was no problem with the physical keys, and the power still works, I cannot test the Vol buttons tho.
Has anyone ever had a problem like this? How can I come back from this? Is there a way to flash a ROM without download mode or turned off phone?
Thanks for any help!!
Click to expand...
Click to collapse
Here the same problem, have a40 in loop and never get rocgnized for computer, tryed many different cables, and installed a booring large amount of drivers software and nothing...
you need to power off device completely. let battery drain if you can't shut down. press and keep holding volume down + plug in usb cable for Odin3 (I doubt both?)
aIecxs said:
you need to power off device completely. let battery drain if you can't shut down. press and keep holding volume down + plug in usb cable for Odin3 (I doubt both?)
Click to expand...
Click to collapse
Generic answers, repeated 800 times why really need to waste a post with that? and that not was the problem:
1- For no usb recognition, is this phone bad design, in the back tap where is the battery in the samsung logo more or less if you push with fingers and charge is because the design of baterry is so crap and your usb port goes off when the under tap cable moves or just get little out of conection. If you can get working after push, usb on phone will do too.

Categories

Resources