dont kno if im posting this in the correct section or not but can some one plz help? i was trying to flash the stock files for my samsung vibrant with odin, but it froze so i unplugged and tried to reboot my phone but the phone to pc screen came up. ive tried holding the volume buttons + power to get back to download mode, but it just reboots and goes back to it, can anybody help?
Did you hold the power button down till it disappears and then release the power button immediately as it disappears?
hadnt tryin releasing the power button right away but i just tried and still no luck
Johnz is right. To make sure, unplug & plug back in the usb cable, then hold down the volume keys & power, wait till the screen flashes to black, then release power.
Unplug and pull the battery.
Install battery.
While holding both volume buttons, plug in usb cable.
Have odin ready to go, it seems to help. The phone should power up directly to download mode, once odin sees it, hit start.
i dont get what im doing wrong because ive tried what u guys said but after the screen flashes black when it comes back on its the phone to pc screen. ive also noticed that if i pull the battery while the usb cord is connected the phone stays on at that screen until i remove the usb cord, is that normal?
i just read that if the normal ways dont work that means ur phone is hardware locked. looks like im gonna have to try to send it back to tmobile and hope for the best
Try the above, but also hold the home key. I did the exact same as you, and this enabled me to get back to download mode, so I could Odin.
1) Remove battery, SIM, and sd card.
2) Plug in USB Cable.
3) Hold down Vol +/- as well as home.
4) Press power button for 2 seconds, then release.
This should get you into download mode. Then you can Odin back to whatever you were intending to do.
thanx for all the help guys but nothing seems to be working for me
Just throwing out an update incase anyone was wondering, I got my replacement phone yesterday and it turned out to be hardware locked as well. Tried to flash the fix for it and it failed and bricked my phone! So after calling tmobile they will be sending me another replacement and hopefully that one wont be locked as well
I had the same problem trying to get into Download Mode, I got into download mode and using ODIN tried to flash update. The process was stick for 10 min.
So I unplugged USB and got this phone to PC icon. All I had to do to fix it was to go into download mode again by holding both vol +/- keys and pressing power button until screen goes black then release the power button as soon as the screen went black. If you hold the button longer it will go into recovery mode. Then open ODIN again and re-connect USB and ODIN will detect COM port. However you have to make sure that all samsung usb drivers are installed. That is it. Then flash the update and you all set. The phone will reboot and you are back up and runing.
ttabbal said:
Unplug and pull the battery.
Install battery.
While holding both volume buttons, plug in usb cable.
Have odin ready to go, it seems to help. The phone should power up directly to download mode, once odin sees it, hit start.
Click to expand...
Click to collapse
there is another way to this method, that works on any vibrant i've tried it on and also the captivates, had to help a friend restore his yesterday.
remove battery, sd and sim cards
plug in usb cable to pc and phone
hold down the volume buttons only
pop in the battery
if it comes up to the battery charging icon, pull the battery and put it back in again, should go right into download mode.
again, this works on any vibrant i've tried it on, and the captivate as well, good luck.
Related
hi guys... so i don't know how i got this vibrant soooooo far gone .. im afraid i have gotten it too far...
i was doing a odin back up and odin froze!... i did nothing for hours!!!! finally i shut off the program.... the phone rebooted into a screen with a picture of a phone with a triangle then dots to a computer!!!
omg!!! so im freaking out.. anyone know if there is a way back from this?? i can't even get back into recovery mode!!
please any help will do......
there was a thread about that issue, turn off your phone, unplug the usb cord, plug the usb cord. hold vol up and vol down and the power button. it will come on but when it goes off release the power button and keep holding down the vol up and vol down. should go into auto download mode. then u can reload it via odin.
xsilvercivicx said:
hi guys... so i don't know how i got this vibrant soooooo far gone .. im afraid i have gotten it too far...
i was doing a odin back up and odin froze!... i did nothing for hours!!!! finally i shut off the program.... the phone rebooted into a screen with a picture of a phone with a triangle then dots to a computer!!!
omg!!! so im freaking out.. anyone know if there is a way back from this?? i can't even get back into recovery mode!!
please any help will do......
Click to expand...
Click to collapse
this is normal just continue to download mode as normal.
http://forum.xda-developers.com/showthread.php?t=741027
you can save your device through odin, plug your phone in to your computer and try to go into download mode may take a couple tries, and flash the stock ROM you can find on these forums
i have already tried the sequence to get it into download mode... it doesnt work... tried adb and nothing registers....
anymore ideas? looks like im going to have to do a warranty exchange.
The only way I can reliably get to download mode is: power off, remove battery, replace battery, hold both vol buttons, plug in usb. works every time though.
Sent from my SGH-T959 using XDA App
update
ok so that actually worked!!!! i pulled the battery ... pluged the usb cable in and while holding volume up and down buttons i forced the battery in.. and now its in download mode!!!!
now here is my next road block.. whenever i tried to use odin i cant get pass that file analysis part and nothing happens..
any ideas? i looked it a thread and it said to reboot my computer into safe mode and disable digital driver sig.. still not working..
ideas on how to get pass the file analysis part?
Best way for us to help you, is for you to help yourself first, educate yourself and post this in the right forum please and we would all be more than gracious to help you out
sorry
hey guys thanks for all the help and suggestions... at first i just thought i would post in a development sections for some reason that made sense to me.. and im sorry if i posted in the wrong section....
xsilvercivicx said:
ok so that actually worked!!!! i pulled the battery ... pluged the usb cable in and while holding volume up and down buttons i forced the battery in.. and now its in download mode!!!!
now here is my next road block.. whenever i tried to use odin i cant get pass that file analysis part and nothing happens..
any ideas? i looked it a thread and it said to reboot my computer into safe mode and disable digital driver sig.. still not working..
ideas on how to get pass the file analysis part?
Click to expand...
Click to collapse
are you using a .pit file? and if so is it the right 512 .pit file?
if both those are yes, delete the one on your system and re-download it.
I had this same exact problem a few weeks back Odin would hang on the pit file, just redownloaded and it worked like a charm.
and just a quick reminder of everything out for the Vibrant right now
Only stock firmware use the 'PDA' option a pit file, and re-partition
froyo firmware use the 'PDA' option and a pit file, no re-partition
JACs kernels use the 'CSC' option and no pit file, no-repartition
i have a Bell Vibrant and all the methods don't work. i tried the 3 button (remove batt,place in batt, plug USB, wait for the the ''star" to appear, hold VOL+/- and POWER and wait for the screen to turn off, release POWER, but it just goes back to recharging screen. tried it 40 times
tried the power off, remove battery, replace battery, hold both vol buttons, plug in usb. no go as well.
ANything else? I'm stuck at the boot screen (the 'S' glowing part).
This is what always works for me.
Unplug your USB from your phone
Makes sure ODIN is ready to go on your PC
Hold down the Down Volume and Power until the download screen comes on
Then plug your USB back into the phone
fire up odin
pull your battery
connect phone to pc WITH THE BATTERY OUT
hold volume up+down and power
put battery in while still holding those buttons
the screen will light up with....something. Wait for the screen to blink and then release the buttons.
You are now in download mode!
i will try those methods. Thanks.
crap, still no. just keeps showing the battery charging. i remember rescuing my htc magic so many times, but no go on this guy.....
Odin all fired up when doing this......
Deliximus said:
i will try those methods. Thanks.
crap, still no. just keeps showing the battery charging. i remember rescuing my htc magic so many times, but no go on this guy.....
Odin all fired up when doing this......
Click to expand...
Click to collapse
Did you make sure that the USB was unplugged when you used my method of holding down the volume down button and power button together until the download screen came up?
If you are familiar with ADB. You can also power your phone on and then plug in the USB and then type in the command line:
adb reboot download
to get it to reboot into download mode.
You can also use this command from the recovery console if you are able to get to it.
mesajoejoe said:
Best way for us to help you, is for you to help yourself first, educate yourself and post this in the right forum please and we would all be more than gracious to help you out
Click to expand...
Click to collapse
Dude, the Vibrant is new to us all. None like it. So dev wise its harder to explain and understand when we are used to coming from a one press method, now were using Odin, and Thor's hammer to flash our phones, which is god awful, no pun intended.
Dont flame your fellow Vibrant user cause he doesent understand the 613 steps it involves, and every other way to do so. Help the kid.
I am also in this position, just using a finger in the socket method, if its on it'l shock me, know what i mean. Just try it all. I have a feeling its getting harder and harder to brick phones because the manufacture is not retarded, they fix them right back, and ship them back out to customers who need replacements. I know this as a friend works at an AT&T shipping warehouse.
So cant we all just hit a bong, or get a long? And help?
If someone could explain all this 512PIT, PDA, and CSC, and Phone. It would help so much, sometimes a picture is worth a thousand words. Just sayin.
"Oh man, I am so high right now, i have no idea whats going on."
-Towelie
aloxotls said:
Did you make sure that the USB was unplugged when you used my method of holding down the volume down button and power button together until the download screen came up?
If you are familiar with ADB. You can also power your phone on and then plug in the USB and then type in the command line:
adb reboot download
to get it to reboot into download mode.
You can also use this command from the recovery console if you are able to get to it.
Click to expand...
Click to collapse
Yeah man, i'll try it again!! And when do I start typing (sending out the adb command) when the power turns on? Thanks.
Question is: when i press power+vol Down, the boot splashscreen comes on (Galaxy S etc etc).....
I am sorry you have a Bell Vibrant, it is a little different than my phone. I found this hope this helps
HOWTO GET INTO DOWNLOAD-MODE:
- Turn off your Phone
- Hold VOLUME DOWN + HOME Buttons
- While holding VOLUME DOWN + HOME Buttons press POWER Button until you reach Download-Mode
- Release all Buttons
I also read that some of the Bell Vibrants had their Download/Recovery mode disabled.
http://forum.xda-developers.com/showthread.php?t=754673&highlight=bell
As far as the adb command I would start as soon as it powers on. It will say "error:device not found" at first, but just keep on hitting arrow up and hitting the enter in the command window until it accepts the command.
Good Luck
my vibrant is bricked really badly i tried to odin back to stock but it failed and messed up my phone now i can't go into download mode and i have no battery sign or boot sign or any sign no matter how much i press buttons on it anymore
Have you tried this method?
1. Power off the phone
2. Take out the battery
3. Press and hold BOTH volume up and volume down buttons
4. Pop in the battery
5. Attach USB cable to the phone. The other end of the cable should already be plugged into a computer
The phone now should be in the download mode
If the above fails get a jig..... but the above post should do it...... Remember to have Odin up
Okay, so I think I brainfarted and softbricked my Vibrant. I tried to get it into download mode, but pressing vol up+down only gets me a gray battery icon, not the usual download screen. When I power it up regularly, it goes into bootloop. It's never had a problem going into download mode before, so I don't know if there's a malfunction with the vol buttons or what. I certainly seem to suck.
(Ugh, just noticed the no questions in the general forum rule. Mods, please delete)
Pull battery
Plug phone into computer via usb
Hold vol up, vol down, and power
Replace battery while still holding those buttons
U can go to 4shared and grab a app called hot boot, it will put u in recovery
Sent from my SGH-T959 using xda premium
Turn off phone
pull out battery
hold Volume UP and Volume Down
Plug in USB cable to computer
Put battery in
Once in download mode let go of Volume UP and Down
You could always us the toolbox
http://forum.xda-developers.com/showthread.php?t=954509
try to do the same steps but hold the vol up button only (not the down)!
this the only way that i can get into download mode!
These guys listed about every way to get in to download mode. If none of them work, you are doing something wrong...
Are you running gingerbread or froyo?
Button sequences are different. Gingerbread uses one volume button(depending on the kernel either up or down) and the power button, while froyo uses the both volume buttons only.
Sent from my SGH-T959 using xda premium
(Depending on the level of softbricking you will either see the Android with a shovel or a phone and computer with exclamation mark, both are download modes)
Froyo bootloader:
Pull Battery,
Put Battery back in phone,
Hold only volume up and down at same time.
Insert USB.
GB Bootloader:
Pull Battery,
Put Battery back in,
Press and hold Volume Up+Power button.
These should work without flaw. If neither work for you, you may need to invest a couple bucks in getting a USB Jig.
Same issue witht similar results
I am having the same issue, Phone was rooted, on the Keis Gingerbread Update. When I tried to restore to Froyo, using T959UVJFD it got stuck in a boot loop, Tried to go to CWM cyogenmod using both Oden and Recovery and Odin Failed, Recovery gave me the evil Signature Failed.
So I tried a different Froyo EUGENE373 which bricked the phone. I was able to unbrick with onclickUnbrick (Awesome app, thank You). But when I tried to apply The Factory Froyo again it failed in Odin.
Now, the PC will not recognize the phone, USB divice failed message. I removed and reinstalled the drivers, Tried the Samsung Drivers, the Keis drivers and Hiendall drivers as well as the USB drivers with the ADK / SDK toolkit. I tried to connect the phone to another PC with the same result. I know that I am doing the process to get into Download mode properly, but it only displays the greyed out battery, with the USB unplugged the phoned boots to the Galasy S GT-I9000 Samsung screen and I am not able to get out of it with any button combo.
This is my wifes phone and I am in the doghouse for this one. I have rooted and flashed my Verizon Fascinate with no issues. Thank You for your help. if I can get into download mode I was going to follow the process in the NOOB root, flash sticky thread, unless someone has a better Idea.
Okay so I seem to have run into a little problem I was planning on updating cleanrom up to 1.2.5 but was on cwm. I had managed to switch over successfully to twrp 2.2.0. I went ahead and used goo manager to download the updated zip of 2.2.1 and tried flashing it thru twrp. Now I am stuck in google bootloop and cant get into recovery or more importantly bootloader. I have been trying last 30mins to hold power and both volume buttons but it either keeps rebooting back to the google screen or not doing anything at all just have to repress to to turn it off but it will turn back on automatically. I tried hooking it up to my usb and labtop but it looks like it wont even recognize it. I just fully charged it so I am good for now just a little worried cant get out of this mess.
I ran into a problem like that with clockwork recovery it kept on rebooting in recovery but I could still go into download mode I was at work away from my computer so I had no choice but to keep trying that three button magic until it finally restored a backup I had on my external card.just keep on trying to pull the battery then try to go into recovery. You might 've gotten a bad download
Sent from my SGH-T999 using xda premium
problem is I cant get into recovery. or the green screen to get to bootloader. It just completely stuck in a bootloop on the google screen mocking me... I am really contemplating opening it up and taking out battery but is that a good idea? Or is there anything else I can do?
so I pulled off the back cover but really dont want o disconnect the battery might mess something up but I cannot get the device to shut off.
disconnecting the battery does nothing it shuts it off and keeps it off but when I connect it to the charger the battery symbol pops up for a second and then goes completely blank. I went ahead and tried again to boot into bootloader pressing power vol up + down and all combinations of power vol -, power vol +
power turbo press vol +/- but no luck still in google screen.
If you're in a bootloop you need to connect your Nexus 7 to a computer. Then you will be able to access recovery via the Power button and volume buttons.
is it going to make a difference that everytime i try to reboot it just the black google screen? I have tried it connected to the wall charger and connected usb to the labtop but nothing.
clago87 said:
is it going to make a difference that everytime i try to reboot it just the black google screen? I have tried it connected to the wall charger and connected usb to the labtop but nothing.
Click to expand...
Click to collapse
It's supposed to do that when you're trying to go to recovery from bootloader without the USB cable plugged into a computer, may need to have the drivers installed on said computer. It's an issue with the nexus 7 bootloader and every one of them does it. What your experiencing is perfectly normal if you tried to go to recovery from bootloader with the bolume buttons and then got the google screen bootloop.
If it doesn't work when you plug it in and try, then try unplugging it, manually rebooting with it plugged in first, or vice versa
Update: I can get on Team Viewer and remotely reboot you into recovery through the PC if you want, or at least give it my best shot.
ok so i disconnected battery and have the device off. I should then try connecting it to the pc and try booting up holding down all buttons?
clago87 said:
ok so i disconnected battery and have the device off. I should then try connecting it to the pc and try booting up holding down all buttons?
Click to expand...
Click to collapse
Have you installed the right drivers on the computer you're using, for ADB and the device drivers, when you unlocked and rooted?
Answer to your question is yes try that. But I wouldn't be disconnecting and reconnecting it, I can't recommend that and then learn tomorrow that static zapped something important.
yea I am getting nothing by connecting to pc. I have all the drivers adb and fastboot installed when I rooted and unlocked couple weeks back but it looks like device is not being recognized or read at all by the pc.
connecting to the pc holding the volume + button gets it recognized for a second and tries to install a driver apx but unsuccessfully.
I am not making any progress whatsoever kinda sucks starting the weekend like this. I have gone thru some bad stuff with my atrix but nothing like this were I cant even access my bootloader boot into recovery or even fastboot. Should I try and get it to just stay off and see if overnight it works its own magic? Hate going to sleep witht his on my mind but I think with a clear mind in the morning something good will happen.
I can get it to stay off by holding both vol+ and vol- but trying to turn it off with just the power button just keeps it turning back on/off...
so I slepted on it thru the night let the tablet rest but went back this morning and I still cant get into bootloader or recovery. Is there anything I can do?
Has anyone else had this problem where they cant boot into recovery or bootloader? It's like the power button and vol keys are unresponsive even though they still work to turn on the device.
are you sure that you flashed the right recovery? but you should still be able to get the bootloader. are you pressing power + volume down(volume down, not both volume buttons. i noticed you wrote both volume buttons) to get into the bootloader?
I think I chose the right recovery the first version downloaded thru goo manager but it was the 2.2.0 version. I had the option on the of downloading the 2.2.1 zip or the .img but i downloaded the .img to just to flash with the current version of twrp that was working. There have been times were I have not been able to get into recovery on my atrix or htc but I've always been able to get into the bootloader this is the first time I've been locked out of my device kind of got me scared its not even a month old. So you say to get into bootloader you dont have to hold down both volume buttons? I will try again to power back up using the volume down and power button at same time... Wish me luck
clago87 said:
I think I chose the right recovery the first version downloaded thru goo manager but it was the 2.2.0 version. I had the option on the of downloading the 2.2.1 zip or the .img but i downloaded the .img to just to flash with the current version of twrp that was working. There have been times were I have not been able to get into recovery on my atrix or htc but I've always been able to get into the bootloader this is the first time I've been locked out of my device kind of got me scared its not even a month old. So you say to get into bootloader you dont have to hold down both volume buttons? I will try again to power back up using the volume down and power button at same time... Wish me luck
Click to expand...
Click to collapse
good luck!
yea, only power button and the volume down button.
quick question before I connect the battery does it make a difference whether or not I have it plugged in charging or connected to the PC while trying to boot into bootloader?
Hi!
I have a problem with a galaxy a40 device, I flashed a stock ROM with Odin, everything went fine, green lights, PASS and all, but now the device just won't go pass the SM logo anymore. When I turn on, logo appears 2-3 secs I get a warning of the unlocked BL then logo comes back and after a second the phone restarts itself and the same goes on forever ( well about several hours, and after that it just shuts off somehow ). I cannot enter recovery mode or download mode at all. I keep pressing the combinations Power + Vol Down, Power + Vol Up, All three and every combinations I have just found on the internet so far. Odin doesnt recognize the phone, which is not a surprise since it won't start up. I have tried with adb but waiting for device is all I get.
How is it even possible that I cannot enter download mode at all? There was no problem with the physical keys, and the power still works, I cannot test the Vol buttons tho.
Has anyone ever had a problem like this? How can I come back from this? Is there a way to flash a ROM without download mode or turned off phone?
Thanks for any help!!
The download mode for this model is different from previous Samsung's :
IIRC, with the phone off, you need to hold VolumeUp and VolumeDown, then plug in the USB cable connected to a computer (you may need to press Power to power up the phone, I can't recall properly).
From there, you should be able to restore a stock ROM with Odin.
Let us know if it helped !
gmarko247 said:
Hi!
I have a problem with a galaxy a40 device, I flashed a stock ROM with Odin, everything went fine, green lights, PASS and all, but now the device just won't go pass the SM logo anymore. When I turn on, logo appears 2-3 secs I get a warning of the unlocked BL then logo comes back and after a second the phone restarts itself and the same goes on forever ( well about several hours, and after that it just shuts off somehow ). I cannot enter recovery mode or download mode at all. I keep pressing the combinations Power + Vol Down, Power + Vol Up, All three and every combinations I have just found on the internet so far. Odin doesnt recognize the phone, which is not a surprise since it won't start up. I have tried with adb but waiting for device is all I get.
How is it even possible that I cannot enter download mode at all? There was no problem with the physical keys, and the power still works, I cannot test the Vol buttons tho.
Has anyone ever had a problem like this? How can I come back from this? Is there a way to flash a ROM without download mode or turned off phone?
Thanks for any help!!
Click to expand...
Click to collapse
Here the same problem, have a40 in loop and never get rocgnized for computer, tryed many different cables, and installed a booring large amount of drivers software and nothing...
you need to power off device completely. let battery drain if you can't shut down. press and keep holding volume down + plug in usb cable for Odin3 (I doubt both?)
aIecxs said:
you need to power off device completely. let battery drain if you can't shut down. press and keep holding volume down + plug in usb cable for Odin3 (I doubt both?)
Click to expand...
Click to collapse
Generic answers, repeated 800 times why really need to waste a post with that? and that not was the problem:
1- For no usb recognition, is this phone bad design, in the back tap where is the battery in the samsung logo more or less if you push with fingers and charge is because the design of baterry is so crap and your usb port goes off when the under tap cable moves or just get little out of conection. If you can get working after push, usb on phone will do too.