I got my new Touch 3G last week, but since removing the Orange branded rubbish by flashing to the default HTC rom I have had a problem. I can't be sure if the problem was there before I got rid of the Orange branding stuff though.
If I leave the phone turned on for a while, or stay on a app for too long the screen sort of stains in the background, like what was on the screen is still partially visible for a while before completely going away.
It isnt a particularly big issue and if it was caused by me doing something wrong when flashing the rom (presumably voiding my warranty?) its something I can live with, but if it isnt help with resolving the problem would be appreciated.
Anyone?
I think this is not a bug, it is normal. The TFT-Displays have a little delay in changing the screen content. This also means that you can see the content displayed before a short time after switching display off.
Its not really a little time, if I leave it for too long the screen can take about a day to clear.
In this case it seems to be defective.
Related
Something really strange happened to my K-JAM recently. I installed some text-to-speech program, which name I can't recall right now, because I removed it instantly. The thing is that this program was running in a VERY strange way. The following day the K-JAM fell on the ground and after some time it started to act weird. All of a sudden whole screen gone pale - like when you adjust the TV set for too high lightness. Everything works normal, except for that you can barely see anything on the screen...
Now, what I noticed next, is that the problem appears when I move the keyboard like I was going to extend it. Even small movement is enough to make the screen go pale. To be more specific - it goes pale when I "lock" the k-board in whichever position, not when I "unlock" it. When I turn the divice off and on back again, everything goes back to normal...
Any idea if this would be software or hardware problem? Anyone had something like that? If it just fell on the ground, I'd be sure that it is mechanical problem, but since there was this weird TTS program installed, I wonder if this isn't the case. Could it be, when the problem occurs even after a hard reset?..
Another question perhaps - do you think I should give some new ROM a try?
Which would you recommend?..
If the problem remains after a hard reset then it is not software. Sounds like the fall cocked something up.
You can return it under warranty but if they determine that you caused physical damage then you will end-up paying for it. If you have insurance then that should cover it.
Yeah, I do have insurance. The only problem is that I have to fly all the way to UK to sort it.
Bollox...
Hello from down-under ,
I've come to put forward a problem myself and a few others are having over at the Mtekk forums. I currently just purchased an I-Mate JasJam on Telstras' new NextG network and have been using it for about a week and a half. As this fantastic piece of equipment is a little on the expensive side, I wanted to make sure it was kept safe all the time, so I began to use (no matter how silly it made me look ) the I-Mate supplied Pouch, little did I know it did more damage then not using it...
After investigating over the last few days, It was concluded that the magnetic found in the supplied Pouch had some diverse effect on the switching on Landscape to Portrait mode when removing the JasJam from the Pouch to answer/make a call, play a game or send a text message; often resulting in a 'bugged' or 'glitched' screen, stuck between either Landscape or Portrait etc (I fixed by removing the JasJam and sliding out the Keyboard and back in).
After I few days I thought that this couldn't be right for a brand new machine and took my problem to the Internet in which I found others with the same problem. Since then I have stopped using the supplied Pouch and am now looking at purchasing the Krussel Orbit Pouch as a magnetic-less replacement (any users with one, I'd love your feedback). I am making this thread to see if any users of the XDA-Developers board have faced this issue and ask one further question:
1. Since I stopped using the Pouch I can only find one annoying trait left, whenever I switch the Screen back on from 'Standby' mode I seem to receive a small 'glitch' in the Today Screen if the device has been locked, if the device has been left unlocked the Screen can be switched on/off with no issue - does anyone else have this problem, I'm concerned that the magnetic pouch has caused some internal damage...
Thanks,
Elite_Gamer04
Hi, there is a bit more about this problem in the accessories thread, I noticed the magnet causing issues and wondered about internal damage as you did, even possibly causing the align issues, but a few people reported back they had been using the case from day 1 and while it affected the landscape/portrait, they had no align issues or any other problems, so I don't suspect that there is any internal damage occurring..I do wonder about your screen glitch but without actually seein it..I haven't a clue, also do you have a lot of today plugins?..could possibly be one of them is buggy..I'm not sure, but the case does certainly suck, I was immediately concerned with the magnet strength, off topic..but on my device if my thumb is a bit damp or any metal touches the aluminum bezel around the ear piece of the phone..the screen will flicker.
Thanks for your reply Chaotic, My device is in the same state as when it come out of the box, so this isn't a 3rd party issue. I have tried removing/adding the default Today Screen icons to see if it makes an issue to the 'glitching' of my screen when it on/off and it makes no difference, only thing I can see that makes it not happen *sometimes* is when the device is not locked.
Well thats one user without my issue, hoping someone will report it, or I'm going to get a replacement.
*If your testing to see if you have the same issue as me, simply hold your device in your hand (try both with it Locked and Unlocked) and push the top right-hand side button which should switch your screen off, press it again for it to come on. If you see a sort of 'glitch' of white on your Today Screen and then it fixes itself (I'm talkin 1-2 seconds) you have the same as me.*
Hi chaps,
I've used the magnetic pouch from day one with my UK T-Mobile Vario II and am still yet to see the landscape/portrait switching issue when removing the Vario II to answer a call.
I had a theory about this, and it's probably going to get shot down in flames for it's obviousness, but I'll mention it anyway... Could the problem be down to the machine being powered down (manually or automatically) while in Landscape mode... then when switching on automatically when a phone call is received, the phone tries to switch back to portrait mode but gets stuck?
I have road tested this theory on my own Vario II and have not seen the problem at all, but my ROM may handle things differently to yours? Apologies again if this suggestion is obvious.
elite_gamer04 said:
Thanks for your reply Chaotic, My device is in the same state as when it come out of the box, so this isn't a 3rd party issue. I have tried removing/adding the default Today Screen icons to see if it makes an issue to the 'glitching' of my screen when it on/off and it makes no difference, only thing I can see that makes it not happen *sometimes* is when the device is not locked.
Well thats one user without my issue, hoping someone will report it, or I'm going to get a replacement.
*If your testing to see if you have the same issue as me, simply hold your device in your hand (try both with it Locked and Unlocked) and push the top right-hand side button which should switch your screen off, press it again for it to come on. If you see a sort of 'glitch' of white on your Today Screen and then it fixes itself (I'm talkin 1-2 seconds) you have the same as me.*
Click to expand...
Click to collapse
I assume you are referring to the lock/unlock option found on the Today screen? I also see a short white screen delay when using this Today screen option.
I also see an even longer delay when using the password/pin lock option. Probably something to do with the locking program checking to see if the preset time delay for locking and requesting the password/pin has passed.
Disabling both options makes starting up a lot faster, although you may of course need these options enabled. I'm sure it's something that will be resolved by the manufacturer in time.
elite_gamer04, I hadn't ever used the lock on my device, so I enabled it just to test, and there wasn't any differences, I also wasn't sure of what the actual glitch was, but since you mentioned it I did some further investigating, I do notice a white screen when coming back from standby, but it lasts no longer than half a second..definitely not 2 seconds.
g00nerz, its all good, all info around here is appreciated, but there is definitely an issue with the case magnet, I don't have a single landscape/portrait issue unless I put it in the bundle case..I use a modded aluminum case at the moment..but if I switch back it happens, I'm pretty sure the words "bundle case" are in the title of the post with others with this issue if you want to check it out.
I have read where some people were discussing that they thought some had different screens..that could be why you haven't had this issue or maybe it is ROM related, but from what I understand its been a variety of brands with this issue...now that I think about it..I wonder if all the brands bundle cases are the same?
I think its Mike(I hope I got that right) that has tore one of these apart..few posts about it with pics on the forum he might know, but anyhow I wonder if theres actually a hardware switch that triggers the switch from portrait/landscape when the slide out kb is opened, and the magnet is affecting that..could also be it was revised on some models.
I'm just speculating/guessin on what might be causing it, I really haven't any solid info other than some people definitely have an issue with the case, including me.
I also see a short white screen delay when using this Today screen option
Click to expand...
Click to collapse
I <3 you hehe. Thank god its not just me . Yes I was referring to the 'Device Lock' and 'Device Unlock' function on the Today Screen. When it is Unlocked and I switch on/off the screen I see no 'lag' or 'white glitch' but with it on I see a small 1-2 sec lag. Anyways as you have confirmed it also I don't have to worry about returning mine and will get on with my new Krussel case I'm about to order.
Thanks
P.S If others are having this issue, or know of how to fix, don't hesitate to post.
Please consider that the use of wifi may drasticely slow down the device's power up. I do use the default case with the strong magnet, and when I power up my device with the wifi enabled it takes a while until he completely awake; the wifi plus the switch landscape => portrait (thanks HTC case) slow it down.
I am also experiencing the "auto answer" issue; from time to time when I put my device off its case it answer to the incoming phone call, but till now I was not sure that the case could be involved; are you sure about this? I tried to give some testing but I was not able to reproduce it; it only happen when it is not expected to happen
elite_gamer04 said:
Hello from down-under ,
As this fantastic piece of equipment ......the I-Mate supplied Pouch, little did I know it did more damage then not using it.........I switch the Screen back on from 'Standby' mode I seem to receive a small 'glitch' in the Today Screen if the device has been locked, ....
Click to expand...
Click to collapse
Hi elite_gamer04, As you had rightly mentioned this is really a fantastic device and no doubt about it.....like you I had the same problem when I bought it around 2 months back.
I was breaking my head as to why its happening, it looked for me as if the device hangs on and off...but did not notice keenly the instances when it happened as removing it out of the pouch was too normal a thing that did not hint me that it has something to do with the issue...But I was totally broken and disturbed and decided somehow I am going to get a replacement. I took it to the service centre and the guy there (very smart) as soon as I mentioned about the problem ( I went there thinking that it has something to do with the sliding mechanism) responded spontaneously taking the pouch opened the flap and took the magnet side over the screen and showed it to me....wow yes...its the pouch which was the culprit as we noticed the screen going crazy....Anyway I was relaxed but from that instance I kept aside the pouch that came with the pack and I am currently using a different one from the stores. Till now I have noticed no glitches and am happy I own a real amazing fast device.
About the other glitch you mentioned when the phone is locked yes I tried and it is there even for me but I dont think its a major issue for you to replace the device as its something to do with the screen refresh rate and memory which am sure would be fixed by new ROM upgrades in the days to come...but relax rest assured you own a fantastic device.
All the best
Thanks for posting this about the screen - I thought I was going nuts. I bought a replacement pouch that has a belt loop - so slightly more secure than the clip. But when i started using it - it always switches to landscape mode.
I'll have to find one without a magnet i guess!
Hey all,
I've read these forums, and am 90% sure I have a defective Hermes. However, I'm unsure, as these forum posts were just text, and therefore can't really accurately describe the problems being seen. So, I made a YouTube video showing a couple of my issues, especially the screen fading to white. Like I say, I'd just like confirmation, and I'd like this post and video to serve as a help to others who are wondering if they have the same problem. You know what they say, a picture is worth a 1000 words .
Here are more details of my problems, in no particular order:
o The buttons reset after a quick power off and on (not a reset).
o The screen fade problem resets itself after a quick power off and on (not a reset).
o The screen calibration issue (not shown in video) seems to last a little longer sometimes. The issue is that calibration gets a little off. It seems to be by 10-20 pixels, but I can't repeat this as readily as the screen fade.
o This has happened with and without a memory card inserted.
o I've tried two different batteries, with the same results.
o I've tried three different firmwares (original, WM5 update, WM6 Black 2.0).
o The battery quick powerdown issue has only happened to me once (battery drains 10% every minute).
Here's the link to the video. It's only 84 seconds, so take a peek!
http://www.youtube.com/watch?v=zQWqTkoMX_4
Let me (and others) know your thoughts. It'd be appreciated.
PS... about the screen calibration...
FYI, I know about the screen calibration issues some have had wth the Hermes. However, I don't think this is that problem, since I never, ever have to recalibrate my phone. It always corrects itself eventually.
The screen calibration issue (not shown in video) seems to last a little longer sometimes. The issue is that calibration gets a little off. It seems to be by 10-20 pixels, but I can't repeat this as readily as the screen fade.
Click to expand...
Click to collapse
This has been documented HEAVILY in the wiki and the forums so I wont answer that.
The rest seems VERY weird indeed especially the screen going white?!?!
Is it still in warranty because I would so send it to be repaired.
Not seen anything like that on any forum. Are you keeping it somewhere hot or near an e.m. field just before use?
What additional apps have you installed? Do these problems still occur with an "empty" phone (i.e. right after a hard reset before installing third party apps)? If so then that should rule out software and firmware (ROM).
Fade to white issue: hardware problem IMO
Buttons stop working issue: looks like software IMO
Sleuth255 said:
Fade to white issue: hardware problem IMO
Buttons stop working issue: looks like software IMO
Click to expand...
Click to collapse
I agree, the screen going white is similar to when I had my O2 XDA EXEC (HTC Universal) in which whenever I moved the lcd into the mini laptop mode the screen would fade to pure white. When I sent it into PPC Tech they notified me saying in which the lcd cable was damaged itself. Im not sure if thats the case with you necesarily, since it seems the screen goes back to normal after powering the device to standby and back.
The keys are most likely software/rom issues. Perhaps maybe you should reflash to a recent rom and see what happens. Although if that doesnt work I suggest you send in for replacement or warranty. I neeever in the 6 months I had my phone did I ever have problems like the one you've listed.
::EDIT::
I just realized I saw that you tried multiple roms, if thats the case I realllly believe you have a defective phone. It does happen that one in a hundred tend to go bad..
Had similar occurance when mine had gotten damp.
fading screen and hardware buttons
Hi,
I've reported some time ago these issues, they started with LVSW Edition (2007-03-20) and after that Pro - BLACK 2.0, 2.5, 3.0 and still with 3.01.
I don't think is hardware related. i happens in random way. No specific apps or time or connection.
I've had similar issues with the buttons not working on my 8525. It seems to have to do with changing in and out of landscape mode. For example, I'll always have problems if I reset the phone and leave it in landscape mode and I always have to push the keyboard in and pull it back out to get everything working right.
If the buttons DO work, they are usually wrong, like up and down will instead move left to right. Again, pushing in and pulling out the keyboard fixes it for me. I recently upgraded to a new ROM and couldn't say if the problem persists or not.
As for the white screen issue - I'd say it's FUBAR'd.
Hi guys I just got my G1 and I so sad because I have a really weird problem with it.
When the phone is in sleep mode (screen off) sometimes the unlock screen shows, but sometimes weird things happen: only the top bar appear then fade and the screen stay black although still on (I can see the back-light on). Sometimes the screen fades but not to black, to random colors like green, red or blue and then to black.
At first I thought this was an software bug, I'm a software engineer working with cell phones development and I never see a hardware problem like that. But I changed everything software related and I still have this problem (spl, radio and OS), so this has to be a hardware problem unless I'm forgetting something.
[update]
Looks like it happens more often in R33 (original and JF) than in 1.5 (Haykuro H build).
Anyone with ideas?
I'm in Brazil, so I bought it through an importer, I have a warranty if I need to replace the phone, but that would take some weeks, so I'm trying hard to fix it by myself.
I know at least 10 people with a G1... and have NEVER seen this issue with ANYONE.
Dude I would highly recommend replacing the phone.
I myself am a software engineer as well.... this behavior is not conducive to something buggy software would do.
My guess would be a faulty wire connecting to your phones board.
So i've had my Nexus 4 for just over 2 years now. It's stuck by me through thick and thin, i think this might be the end though.
Anyway, so i picked the phone up at around 2 am this morning, it had been working perfectly all day up to this point. So i picked it up, the colours on the screen are a bit weird. I change what's on the screen and the colours remain weird, so i do the standard thing of a reboot to see if that clears it up. This is where the big issue comes in, when the phone turns on again, there's a 1 cm wide black bar on the left side of the screen. Nothing appears to affect it, but sometimes it randomly appears greyer than others.
The rest of the screen has the same weird colours as it did before i restarted, kind of muted, and moving light areas on the screen (like app icons) makes bars of lighter colour move across the screen with them.
If i didn't know that the phone hadn't been dropped i'd be saying that the screen was just broken right now. But i flashed CM12 (was on the latest PA beta) and when the phone was restarting the whole screen flashed working for a split second before going to its broken state again. This hints at the issue being software related, especially given that it initially happened with no physical damage occurring to the phone? When thinking about this, the colour issue reminds me of what happens when you installed CM11 with the wrong kernel and it looks messed up...
Anyway, I think my phone is dead, and i'm posting here in case someone has some genius idea as to what on earth killed my phone.
I'm pretty good at doing stuff with the phone, so can flash and install whatever, hindered only slightly by missing 1 cm of the recovery menu. I would take pictures, but normally i use my phone as a camera and...... If any more info would be useful then please ask!
Thanks for any help, ideas or input in advance!
T