Hi guys I just got my G1 and I so sad because I have a really weird problem with it.
When the phone is in sleep mode (screen off) sometimes the unlock screen shows, but sometimes weird things happen: only the top bar appear then fade and the screen stay black although still on (I can see the back-light on). Sometimes the screen fades but not to black, to random colors like green, red or blue and then to black.
At first I thought this was an software bug, I'm a software engineer working with cell phones development and I never see a hardware problem like that. But I changed everything software related and I still have this problem (spl, radio and OS), so this has to be a hardware problem unless I'm forgetting something.
[update]
Looks like it happens more often in R33 (original and JF) than in 1.5 (Haykuro H build).
Anyone with ideas?
I'm in Brazil, so I bought it through an importer, I have a warranty if I need to replace the phone, but that would take some weeks, so I'm trying hard to fix it by myself.
I know at least 10 people with a G1... and have NEVER seen this issue with ANYONE.
Dude I would highly recommend replacing the phone.
I myself am a software engineer as well.... this behavior is not conducive to something buggy software would do.
My guess would be a faulty wire connecting to your phones board.
Related
Hey all,
I've read these forums, and am 90% sure I have a defective Hermes. However, I'm unsure, as these forum posts were just text, and therefore can't really accurately describe the problems being seen. So, I made a YouTube video showing a couple of my issues, especially the screen fading to white. Like I say, I'd just like confirmation, and I'd like this post and video to serve as a help to others who are wondering if they have the same problem. You know what they say, a picture is worth a 1000 words .
Here are more details of my problems, in no particular order:
o The buttons reset after a quick power off and on (not a reset).
o The screen fade problem resets itself after a quick power off and on (not a reset).
o The screen calibration issue (not shown in video) seems to last a little longer sometimes. The issue is that calibration gets a little off. It seems to be by 10-20 pixels, but I can't repeat this as readily as the screen fade.
o This has happened with and without a memory card inserted.
o I've tried two different batteries, with the same results.
o I've tried three different firmwares (original, WM5 update, WM6 Black 2.0).
o The battery quick powerdown issue has only happened to me once (battery drains 10% every minute).
Here's the link to the video. It's only 84 seconds, so take a peek!
http://www.youtube.com/watch?v=zQWqTkoMX_4
Let me (and others) know your thoughts. It'd be appreciated.
PS... about the screen calibration...
FYI, I know about the screen calibration issues some have had wth the Hermes. However, I don't think this is that problem, since I never, ever have to recalibrate my phone. It always corrects itself eventually.
The screen calibration issue (not shown in video) seems to last a little longer sometimes. The issue is that calibration gets a little off. It seems to be by 10-20 pixels, but I can't repeat this as readily as the screen fade.
Click to expand...
Click to collapse
This has been documented HEAVILY in the wiki and the forums so I wont answer that.
The rest seems VERY weird indeed especially the screen going white?!?!
Is it still in warranty because I would so send it to be repaired.
Not seen anything like that on any forum. Are you keeping it somewhere hot or near an e.m. field just before use?
What additional apps have you installed? Do these problems still occur with an "empty" phone (i.e. right after a hard reset before installing third party apps)? If so then that should rule out software and firmware (ROM).
Fade to white issue: hardware problem IMO
Buttons stop working issue: looks like software IMO
Sleuth255 said:
Fade to white issue: hardware problem IMO
Buttons stop working issue: looks like software IMO
Click to expand...
Click to collapse
I agree, the screen going white is similar to when I had my O2 XDA EXEC (HTC Universal) in which whenever I moved the lcd into the mini laptop mode the screen would fade to pure white. When I sent it into PPC Tech they notified me saying in which the lcd cable was damaged itself. Im not sure if thats the case with you necesarily, since it seems the screen goes back to normal after powering the device to standby and back.
The keys are most likely software/rom issues. Perhaps maybe you should reflash to a recent rom and see what happens. Although if that doesnt work I suggest you send in for replacement or warranty. I neeever in the 6 months I had my phone did I ever have problems like the one you've listed.
::EDIT::
I just realized I saw that you tried multiple roms, if thats the case I realllly believe you have a defective phone. It does happen that one in a hundred tend to go bad..
Had similar occurance when mine had gotten damp.
fading screen and hardware buttons
Hi,
I've reported some time ago these issues, they started with LVSW Edition (2007-03-20) and after that Pro - BLACK 2.0, 2.5, 3.0 and still with 3.01.
I don't think is hardware related. i happens in random way. No specific apps or time or connection.
I've had similar issues with the buttons not working on my 8525. It seems to have to do with changing in and out of landscape mode. For example, I'll always have problems if I reset the phone and leave it in landscape mode and I always have to push the keyboard in and pull it back out to get everything working right.
If the buttons DO work, they are usually wrong, like up and down will instead move left to right. Again, pushing in and pulling out the keyboard fixes it for me. I recently upgraded to a new ROM and couldn't say if the problem persists or not.
As for the white screen issue - I'd say it's FUBAR'd.
My Cingular 8525 is having screens issues that I thought I'd post to the community if anyone has seen this.
The normal screen will go to all white under thermal conditions it appears. Thermal being inside a hot car, in my holster against my hip, gripping in my hand, heavy use with BT or wifi... thus I suspect thermal. I've changed battery's, no change. If it has changed to all white screen, a soft reset will not revert the screen back. The pda appears to have to "cool" off before screen will recover.
Could this be a LCD driver chip dieing? The screen itself? Worth repairing? Got my eye on the AT&T Fuze but wanted to keep the 8525 going for a few more months.
Thanks, Craig
holy crap I'm having the same problem. I havent determined heat to be the problem, but the only possible clue is that once, right after i hung up ona phone conversation, the screen turned semi white. If you looked real hard you could tell that the menus and programs were still operating normally, but the screen was screwy. using johkoss's V8 w. Manilla2D
Major problem, theres a MASSIVE thread going for this, sometimes it pays to use the search function.....
this is "the most common issue" on a hermes device.
I, personally, experienced it 3 times with 3 different hermes. Each time I had to send the device back to the shop. Because my device was under warranty, I always got a new one, free of charge.
You guys might want to check the Wiki, cause I believe there's a section there just dedicated for this issue.
I can't remember what the details are, but if my memory serves me right, it has something to do with the hardware (connection of cables to the screen).
I don't use hermes anymore, but I still come to the hermes forum every now and then...
Therer are actually a myriad of reasons you can get whitescreen, both hardware and software. From the descriptions though, it sounds like hardware.
This can be one of the most difficult things to fix as there may be multiple reasons and fixing one thing won't fix the issue.
^
I am agree with you. White screen may be appears occasionally and may be not. When white screen appears in my experience, it's enough to soft-reset.
May be different solutions with another?
HTC TyTN White Screen Issue with S/N Starting with HT6's
is your TyTN S/N start's with a HT6 you have a defective model for sure they are one of the first breads and are being known too have issues, so anyone make sure it starts with a HT733G4323 Etc, if your buying one of these used.
Or Even new Watch Out.
HTC TyTN
1.10
mobile 5
With 6.1 Plug-in's
Can't say that MY HT6 is a problem.. I actually found it faster than a HT7 (I have both). I did have to replace the LCD, BUT, it was because the touchscreen died, NOT whitescreen.
I bought the HT7 as a broken Hermes off ebay and found that it was actually less responsive than my older model. Used it to fix my older HT6 than use the HT7 motherboard in my, now, Frankenphone....
The "broken" Jasjam had a broken camera. It was actually just unplugged from the board. Liked my older model better...
Cheers...
White Screen
Hi to all,
I'm using PDAcorner v.20 w/ 5mb page pool,i to has encounter a white screen issue,it is true that its my be a hardware and software issue but if you only encounter white screen that all the time it is a software issue,you can check (schaps advance config) im using version 2.02.1.0.0 builtin in pdacorner v20 check the performance setting disable file system cache and file system filter cache in the glyph cache use only 8kb observe if the white screen will appear again.
hope that this will help all with white screen issue.
I got my new Touch 3G last week, but since removing the Orange branded rubbish by flashing to the default HTC rom I have had a problem. I can't be sure if the problem was there before I got rid of the Orange branding stuff though.
If I leave the phone turned on for a while, or stay on a app for too long the screen sort of stains in the background, like what was on the screen is still partially visible for a while before completely going away.
It isnt a particularly big issue and if it was caused by me doing something wrong when flashing the rom (presumably voiding my warranty?) its something I can live with, but if it isnt help with resolving the problem would be appreciated.
Anyone?
I think this is not a bug, it is normal. The TFT-Displays have a little delay in changing the screen content. This also means that you can see the content displayed before a short time after switching display off.
Its not really a little time, if I leave it for too long the screen can take about a day to clear.
In this case it seems to be defective.
So i've had my Nexus 4 for just over 2 years now. It's stuck by me through thick and thin, i think this might be the end though.
Anyway, so i picked the phone up at around 2 am this morning, it had been working perfectly all day up to this point. So i picked it up, the colours on the screen are a bit weird. I change what's on the screen and the colours remain weird, so i do the standard thing of a reboot to see if that clears it up. This is where the big issue comes in, when the phone turns on again, there's a 1 cm wide black bar on the left side of the screen. Nothing appears to affect it, but sometimes it randomly appears greyer than others.
The rest of the screen has the same weird colours as it did before i restarted, kind of muted, and moving light areas on the screen (like app icons) makes bars of lighter colour move across the screen with them.
If i didn't know that the phone hadn't been dropped i'd be saying that the screen was just broken right now. But i flashed CM12 (was on the latest PA beta) and when the phone was restarting the whole screen flashed working for a split second before going to its broken state again. This hints at the issue being software related, especially given that it initially happened with no physical damage occurring to the phone? When thinking about this, the colour issue reminds me of what happens when you installed CM11 with the wrong kernel and it looks messed up...
Anyway, I think my phone is dead, and i'm posting here in case someone has some genius idea as to what on earth killed my phone.
I'm pretty good at doing stuff with the phone, so can flash and install whatever, hindered only slightly by missing 1 cm of the recovery menu. I would take pictures, but normally i use my phone as a camera and...... If any more info would be useful then please ask!
Thanks for any help, ideas or input in advance!
T
I'm new to this forum, so I posted in general this problem I'm having since I don't know which category fits for this.
I know this forum is for software-related topics, but I've found hardware questions as well, so I guess this should be fine.
Basically, some time ago my phone started having this problem, which I suspect is hardware related, which is what they call screen burn.
Funny thing is, people usually say this problem is permanent, but in my case it's just temporal.
Sometimes my screen is working just fine, and suddenly starts flickering. If I try to switch apps, a "ghost image" of the other app stays there in the background, and until the screen refreshes, it takes time, or maybe I have to switch my screen on-off again, etc.
Another times It turns white, but I still can use my phone properly.
I've identified it's just a screen issue, because as I said, I can actually use my phone fine, but I have this flickers and ghost images. These ghost images are actually the most annoying problem when they happen.
To do some testing, I downloaded a burn-in test app to check every colour, and I've noticed that most colours work fine, but just the white and grey were weird? Like, maybe in the top of the screen the colour wouldn't show, but in the rest of the screen it was working.
Other times, the screen starts to display "colour lines" in front of everything, and after some time they disappear.
Want I want to know is, is this a hardware problem, or software? I guess it's hardware, I'd find it weird to be software.
If so, changing the screen would fix this ghost images and flickers? I haven't tried changing a phone screen before, but I can just buy one and there are videos for my model on how to change the screen so I could do it.
What I want to know is, how to fix this, and If replacing the screen would do. I honestly am against the consumerism trend of throwing away phones, so I at least want to try.
Thanks.
adrianjaramillo said:
I'm new to this forum, so I posted in general this problem I'm having since I don't know which category fits for this.
I know this forum is for software-related topics, but I've found hardware questions as well, so I guess this should be fine.
Basically, some time ago my phone started having this problem, which I suspect is hardware related, which is what they call screen burn.
Funny thing is, people usually say this problem is permanent, but in my case it's just temporal.
Sometimes my screen is working just fine, and suddenly starts flickering. If I try to switch apps, a "ghost image" of the other app stays there in the background, and until the screen refreshes, it takes time, or maybe I have to switch my screen on-off again, etc.
Another times It turns white, but I still can use my phone properly.
I've identified it's just a screen issue, because as I said, I can actually use my phone fine, but I have this flickers and ghost images. These ghost images are actually the most annoying problem when they happen.
To do some testing, I downloaded a burn-in test app to check every colour, and I've noticed that most colours work fine, but just the white and grey were weird? Like, maybe in the top of the screen the colour wouldn't show, but in the rest of the screen it was working.
Other times, the screen starts to display "colour lines" in front of everything, and after some time they disappear.
Want I want to know is, is this a hardware problem, or software? I guess it's hardware, I'd find it weird to be software.
If so, changing the screen would fix this ghost images and flickers? I haven't tried changing a phone screen before, but I can just buy one and there are videos for my model on how to change the screen so I could do it.
What I want to know is, how to fix this, and If replacing the screen would do. I honestly am against the consumerism trend of throwing away phones, so I at least want to try.
Thanks.
Click to expand...
Click to collapse
Hi...
so it could be software or hardware based.
first i would make a full backup and then try to completly reset the firmware and check if the issue is done
if not...it could be the screen or the mainboard or the connector to the mainboard.
at first i would try to change the screen to a new one. mostly the screen have problems. if that not work it can be the mainboard...for a buying a mainboard i would look at ebay for a completly damage devices just to remove the mainborad there and to buod in to your Device
hope that helps you
solong
speedson
speedson said:
Hi...
so it could be software or hardware based.
first i would make a full backup and then try to completly reset the firmware and check if the issue is done
if not...it could be the screen or the mainboard or the connector to the mainboard.
at first i would try to change the screen to a new one. mostly the screen have problems. if that not work it can be the mainboard...for a buying a mainboard i would look at ebay for a completly damage devices just to remove the mainborad there and to buod in to your Device
hope that helps you
solong
speedson
Click to expand...
Click to collapse
I commented my problem with a friend who studied CS with me, and he told me after seeing the phone that in his opinion it's likely the screen. I think so too.
It's ebay a decent play for buying a screen? Or better aliexpress? I've seen screens for huawei p10 lite in aliexpress
adrianjaramillo said:
I commented my problem with a friend who studied CS with me, and he told me after seeing the phone that in his opinion it's likely the screen. I think so too.
It's ebay a decent play for buying a screen? Or better aliexpress? I've seen screens for huawei p10 lite in aliexpress
Click to expand...
Click to collapse
Hi...
Idk if ebay or Alie would be better. I would take a look wich one could send it fastest to me and if it is original Part or from another manufacture.
Hello, I've been experiencing same kind of issues in recent months and I'm interested how the story continued and did fixing the screen was the solution?
Thanks in advance.