Database Users

Video of Hermes problems... please watch and let me know your opinion?

Hey all,
I've read these forums, and am 90% sure I have a defective Hermes. However, I'm unsure, as these forum posts were just text, and therefore can't really accurately describe the problems being seen. So, I made a YouTube video showing a couple of my issues, especially the screen fading to white. Like I say, I'd just like confirmation, and I'd like this post and video to serve as a help to others who are wondering if they have the same problem. You know what they say, a picture is worth a 1000 words .
Here are more details of my problems, in no particular order:
o The buttons reset after a quick power off and on (not a reset).
o The screen fade problem resets itself after a quick power off and on (not a reset).
o The screen calibration issue (not shown in video) seems to last a little longer sometimes. The issue is that calibration gets a little off. It seems to be by 10-20 pixels, but I can't repeat this as readily as the screen fade.
o This has happened with and without a memory card inserted.
o I've tried two different batteries, with the same results.
o I've tried three different firmwares (original, WM5 update, WM6 Black 2.0).
o The battery quick powerdown issue has only happened to me once (battery drains 10% every minute).
Here's the link to the video. It's only 84 seconds, so take a peek!
http://www.youtube.com/watch?v=zQWqTkoMX_4
Let me (and others) know your thoughts. It'd be appreciated.

PS... about the screen calibration...
FYI, I know about the screen calibration issues some have had wth the Hermes. However, I don't think this is that problem, since I never, ever have to recalibrate my phone. It always corrects itself eventually.

The screen calibration issue (not shown in video) seems to last a little longer sometimes. The issue is that calibration gets a little off. It seems to be by 10-20 pixels, but I can't repeat this as readily as the screen fade.
Click to expand...
Click to collapse
This has been documented HEAVILY in the wiki and the forums so I wont answer that.
The rest seems VERY weird indeed especially the screen going white?!?!
Is it still in warranty because I would so send it to be repaired.

Not seen anything like that on any forum. Are you keeping it somewhere hot or near an e.m. field just before use?

What additional apps have you installed? Do these problems still occur with an "empty" phone (i.e. right after a hard reset before installing third party apps)? If so then that should rule out software and firmware (ROM).

Fade to white issue: hardware problem IMO
Buttons stop working issue: looks like software IMO

Sleuth255 said:
Fade to white issue: hardware problem IMO
Buttons stop working issue: looks like software IMO
Click to expand...
Click to collapse
I agree, the screen going white is similar to when I had my O2 XDA EXEC (HTC Universal) in which whenever I moved the lcd into the mini laptop mode the screen would fade to pure white. When I sent it into PPC Tech they notified me saying in which the lcd cable was damaged itself. Im not sure if thats the case with you necesarily, since it seems the screen goes back to normal after powering the device to standby and back.
The keys are most likely software/rom issues. Perhaps maybe you should reflash to a recent rom and see what happens. Although if that doesnt work I suggest you send in for replacement or warranty. I neeever in the 6 months I had my phone did I ever have problems like the one you've listed.
::EDIT::
I just realized I saw that you tried multiple roms, if thats the case I realllly believe you have a defective phone. It does happen that one in a hundred tend to go bad..

Had similar occurance when mine had gotten damp.

fading screen and hardware buttons
Hi,
I've reported some time ago these issues, they started with LVSW Edition (2007-03-20) and after that Pro - BLACK 2.0, 2.5, 3.0 and still with 3.01.
I don't think is hardware related. i happens in random way. No specific apps or time or connection.

I've had similar issues with the buttons not working on my 8525. It seems to have to do with changing in and out of landscape mode. For example, I'll always have problems if I reset the phone and leave it in landscape mode and I always have to push the keyboard in and pull it back out to get everything working right.
If the buttons DO work, they are usually wrong, like up and down will instead move left to right. Again, pushing in and pulling out the keyboard fixes it for me. I recently upgraded to a new ROM and couldn't say if the problem persists or not.
As for the white screen issue - I'd say it's FUBAR'd.

Screen fading to white ongoing issue- MONEY AHEAD!

Hi all,
I need help,suggestions,anything with an issue I've had for a while. Since the time I started loading WM6 the screen has been randomly fading to white. I have LSVW latest rom 22/4 SE and 1.40.10 radio and 1.40oli although it doesn't matter what rom you load. I tried going back to WM5 and its better but now still fades to white as well.
on advise from oli and legolas I purchased a new battery but still have the same issue.
I have dropped my phone once which resulted in a crack to the right of the DEL/CR keys so could it be a HW issue and if you think so is it one I could open up the phone and fix?
Any and all help appreciated
IN FACT IF SOMEONE CAN RESOLVE THE ISSUE I WILL DONATE SOME CASH TO THEM!
test

Im updating to
LVSW 4-23 Full, Radio 1.40.30.00, SPL 2.10.Oli, IPL 1.04
seeing if any difference comes out.

This is not the first time this issue has been reported:
http://forum.xda-developers.com/archive/index.php/t-301003.html
The conclusion is that it's hardware related. It may be as simple as one of the internal ribbon connectors having a less than firm connection. It may be brought on my anything from physical movement or pressure to internal pressure if the device gats warm. However, it is possible that there is a failing component. IMHO, a case of take it for replacement/repair or first check connectors if your brave and not worried about a warranty.
Mike

mikechannon said:
This is not the first time this issue has been reported:
http://forum.xda-developers.com/archive/index.php/t-301003.html
The conclusion is that it's hardware related. It may be as simple as one of the internal ribbon connectors having a less than firm connection. It may be brought on my anything from physical movement or pressure to internal pressure if the device gats warm. However, it is possible that there is a failing component. IMHO, a case of take it for replacement/repair or first check connectors if your brave and not worried about a warranty.
Mike
Click to expand...
Click to collapse
HHmmm interesting thread .. the only issue i have out of that is the fade to white one.
Maybe Hardware .. i got the phone off ebay and now it has a crack in it .. so i dare say it isnt under warranty any more. (even though its a max of 6 months old).

It may also be software. I experienced the WSOD on my JASJAM when playing with the GPS-related DLL's. Once this problem appeared when switching on the camera. The screen would turn white and soft reset would not fix this, only power off/on would sort it out. Seems that the drivers do not reset (some of) the hardware to a known state on boot.

Had EXACTLY the same problem. Hoped it would be a software problem. Hard-reset a few times to no avail. Upgraded to a couple of the WM6 ROMs. No change. I did notice that when it was cool it tended not to happen, but after being on the phone a couple minutes or using the PDA for a while, it would do it AGAIN.
One weird thing I noticed was that if I did a Soft-reset and held down the Left Soft-key, I could "force" it to fade to white on start-up! VERY WEIRD.
I finally bit the bullet, and sent it back to Telstra to get it sorted. Didn't want to void warranty myself.
It has been just over 2 weeks since I sent it off, and They have sent this reply...
-------
-------
Hi
This phone is currently waiting on a part which was ordered yesterday. Some parts have already been issued but needs further repair.
Regards
Nadine
--------------------------------------------------------------------------------
From: LJ Boyd [mailto:[email protected]]
Sent: Friday, 20 April 2007 2:18 PM
To: ! TMS Customer Service
Subject: RE: Imate JASJAM Problem
Hello, I am emailing about an I-Mate JASJAM phone I sent for repairs early last week (tel # xxx ).
Can you please update me as to status of this repair, as the Telstra shop did not provide me with a second phone while I await return/repair/replacement of the phone.
Thanks,
-------
-------
So, I guess it IS a hardware problem. But then again, that kind of reply, sounds a bit "dodgy" as it doesn't seem to "technical" does it?
Hope this helps.

jyetara said:
So, I guess it IS a hardware problem. But then again, that kind of reply, sounds a bit "dodgy" as it doesn't seem to "technical" does it?
Hope this helps.
Click to expand...
Click to collapse
Their reply was not very technical - does not surprise me however. The people who repair these devices are usually faced with some component/connection/screen or a m/board that needs replaced. They often fail to take account of something as basic as the case pressing on the screen or other components - particularly when device is warm. So they replace the component they think is faulty and then discover the problem is still there. With this issue in particular I think that there are no faulty components just the case is a fraction of a millimetre too tight for the internal components and hence swapping out parts can have no effect. With this fault I advise people to go for a replacement not a repair if possible.
NB: This issue should not be confused with white screen that may appear after installing particular software or when an application crashes, or when the flashing of a new ROM goes wrong! The hardware issue arises most commonly when the device gets warm or put another way goes white after maybe 10 minutes of use and will continue to go white even after hard reset.
Mike

I have this same problem! =(
My phone screen recently (4-5 days ago) started to go white. I never saw this happen with my own eyes but when i picked up my phone and its sleeping i push the power button to get to an all white screen. I can hear noises when i touch the screen but no image other than white. I can solve this by removing the battery and putting it back in, then my scren works fine....its not verry often just like 1-3 times a day.
I want to try a hard reset but have a question first: My phone is unlocked by the ebay guy i got it from, will a hard reset lock my phone back to Cingular?
Next i want to try upgrading my ROM and Radio and anything else...im looking in the wiki for instructions on how to do this. Any help? What else shouls i upgrade?
Ive only had my Hermes for around 2 months so im new to much of this.
THanks!

I recently purchased a Used Imate Jasjam (Ex Telstra Australia) with this issue.
I pulled the unit apart, and reseated and pressed the Power and LCD Display Data Cables... attempting to ensure they were firmly fastened.
I then upgraded to LVSW's Latest WM6 Release.
I have had the Phone go to White once in that timeframe since. I brought it back by pressing the power button of, then one again.
I don't feel that it's really a "100%" Faulty Part... Because it works fine othertimes. It almost seems as if connections or a Data Cable has an Issue.
I'm intending tonight and using the Phone over the weekend to see if the issue continues to occur.

BAD NEWS!!
Well, got my phone back after a bit over 3 weeks I think? I kept ringing the repair center and emailing. Finally they said it was ready, and was sent back to the shop I bought it from. Rang the shop "no it's not here yet, we will ring you"... now the repair centre to the shop is a 20 min drive... on the 3rd, I rang again at 1pm and "no it's not here yet, we will ring you when it arrives." At this point I was really getting p*ed off. So I went to the shop, and demanded, and guess what was AT the Shop?!?!?!
Anyway, after 1 friggin day, I have lost the Red & Green phone buttons! As of tonight the whole bottom section no longer work, and the screen has gone white again.
The repair report listed 3 things replaced...one was a "bezel" another was a "poly" something. I will get the report a list the replaced bits if anyone likes, but their descriptions are kind of strange if ya ask me.
Anyway, I have to send the phone back for repairs again, which could take another 3 weeks +, which I think is completely PATHETIC OF TELSTRA, especially for the fact they dont give the same phone or even similar to "loan" while I wait for my defective $1300 phone to get "repaired"... (more like 'fiddled with' & "yeah, she'll be right mate"...
GRRRRR!!!!

My girlfriends phone was having the same problem. Try popping out your SD card and putting the phone into/out of sleep and see if that brings back a visible screen. Thats how we determined her situation was a hardware problem and not a problem with the rom.

jyetara said:
Well, got my phone back after a bit over 3 weeks I think? I kept ringing the repair center and emailing. Finally they said it was ready, and was sent back to the shop I bought it from. Rang the shop "no it's not here yet, we will ring you"... now the repair centre to the shop is a 20 min drive... on the 3rd, I rang again at 1pm and "no it's not here yet, we will ring you when it arrives." At this point I was really getting p*ed off. So I went to the shop, and demanded, and guess what was AT the Shop?!?!?!
Anyway, after 1 friggin day, I have lost the Red & Green phone buttons! As of tonight the whole bottom section no longer work, and the screen has gone white again.
The repair report listed 3 things replaced...one was a "bezel" another was a "poly" something. I will get the report a list the replaced bits if anyone likes, but their descriptions are kind of strange if ya ask me.
Anyway, I have to send the phone back for repairs again, which could take another 3 weeks +, which I think is completely PATHETIC OF TELSTRA, especially for the fact they dont give the same phone or even similar to "loan" while I wait for my defective $1300 phone to get "repaired"... (more like 'fiddled with' & "yeah, she'll be right mate"...
GRRRRR!!!!
Click to expand...
Click to collapse
Yes, sadly this is kind of predictable as I said in an earlier post in this thread:
http://forum.xda-developers.com/showpost.php?p=1233420&postcount=7
This is why, as I said, get a replacement not a repair if possible. My view is that the individual components are fine but connectors come loose or the heat generated causes pressure to be put on the screen etc So it's a problem with some cases and how the innards in some cases get squeezed. So off course changing the top poly board, connectors, bezel gasket, may by pot luck make a difference but is just as likely to make no difference at all.
Mike

Status Report:
After having my phone playing Video's Through the Night (My Way of a "Stress Test" to Generate Heat) I woke up the find the screen to be "almost completely" White.
Usually its gone completely, however in this instance I was able to see the icons through the whitewash.
I put the phone into sleep and back out and the Display is fine again.
Being that these phones are much easier to pull apart and put back together than my old JasJar I might to do some further experimentation.
I think the issue will have something to do with either one of the following
- Heat
- Pressure on the LCD from Parts Around it
- Faulty Ribbon or Power Leads to the LCD
My suggestions
- In the Case of Heat... I'll run the Same Test, with the Phone Directly in front of a small airconditioning unit I have.
- In the Case of Pressure, I'm going to look and see if I can place some extra Insulation Tape or Similar on the Phone to relieve this
- I wish I could find somewhere to buy the Replacement Ribbon Cables but I don't know where I can get them in Australia... any ideas?

VolarisPtyLtd said:
Status Report:
After having my phone playing Video's Through the Night (My Way of a "Stress Test" to Generate Heat) I woke up the find the screen to be "almost completely" White.
Usually its gone completely, however in this instance I was able to see the icons through the whitewash.
I put the phone into sleep and back out and the Display is fine again.
Being that these phones are much easier to pull apart and put back together than my old JasJar I might to do some further experimentation.
I think the issue will have something to do with either one of the following
- Heat
- Pressure on the LCD from Parts Around it
- Faulty Ribbon or Power Leads to the LCD
My suggestions
- In the Case of Heat... I'll run the Same Test, with the Phone Directly in front of a small airconditioning unit I have.
- In the Case of Pressure, I'm going to look and see if I can place some extra Insulation Tape or Similar on the Phone to relieve this
- I wish I could find somewhere to buy the Replacement Ribbon Cables but I don't know where I can get them in Australia... any ideas?
Click to expand...
Click to collapse
We wait to see. Mind you one guy on these boards found he could get half an hour from his device if he put it in the freezer for a while - so I'm not sure that air-con will be strong enough!!!
Mike

Well Results.....
After pulling apart the unit and reconnected, I think I found my cause to simply be excess pressure.
I've removed the "Black Plastic" Micro SD Card from its Blanking Plate.
Since I've done this... not one White Screen Whatsoever.
I don't use an SD Card, so the issue is resolved for me, however it is very interesting.
Could be Pressure or Heat (Small Hole Might Increase Airflow/Allow for Greater Dissapation or something)

Hi folks,
i've also small experience with this "white screen" issue and just wanted to inform you about it.
I got the device from my former boss who did already complain about this "white screen" issue on his O² XDA trion with original ROM. (honestly i did not really believe him due to my experience with couple of other devices so after i got the device i was just wondering - ok back to the facts).
I installed on Friday the Windows Mobile VI Pro - BLACK 2.5 Release and until today it was running (as far as i remember expect one time) nearly perfect w/o white screens. About 45min ago, i flashed the device with BLACK 3.0 Release and got until now about 5-10 times a white screen.
I assume this is not a hardware ONLY issue but indeed very strange.
I'll go back to 2.5 and will look forward if i get again the white screen or it'll be ok.
Cheers so far

FaCeOff said:
Hi folks,
i've also small experience with this "white screen" issue and just wanted to inform you about it.
I got the device from my former boss who did already complain about this "white screen" issue on his O² XDA trion with original ROM. (honestly i did not really believe him due to my experience with couple of other devices so after i got the device i was just wondering - ok back to the facts).
I installed on Friday the Windows Mobile VI Pro - BLACK 2.5 Release and until today it was running (as far as i remember expect one time) nearly perfect w/o white screens. About 45min ago, i flashed the device with BLACK 3.0 Release and got until now about 5-10 times a white screen.
I assume this is not a hardware ONLY issue but indeed very strange.
I'll go back to 2.5 and will look forward if i get again the white screen or it'll be ok.
Cheers so far
Click to expand...
Click to collapse
You are right to ask the question "is it hardware or software".
1
We know a white screens can arise if folk duff up flashing a new ROM.
2
We know there is a hardware caused white screen that comes and goes often when device gets warm.
3
But there maybe white screens caused by some kinds of crashing software or a buggy ROM etc
Crucially in terms of finding a cure will be distiguishing between these.
2 for most people is easy - take it back and get a replacement.
1 is a matter for the ROM upgrading and fixing boards
3 is a case of trying different ROMs testing 3 party software by selective installation until the problem starts or stops.
In your case I am worried that this is a number 2 device as it did sometimes get the problem before you flashed the ROM and now it's worse. It may only be worse because this particular ROM is generating more heat and consequently more white screens. (see explanations elsewhere).
I suppose if it's an occasional problem you might live with it but otherwise it's replacement at best and repair as a rather dodgy alternative.
Mike

Hey Mike,
well, before flashing the device with a custom ROM, in my opinion it was really difficult to use it.
By flashing it with V 2.5, it was very good usable and with V 3.0 it returned to become more unusable. Nevertheless, i upgraded 10min ago with HARD-SPL-V7 and it's running fine now (i've been wating with downgrading to V 2.5. If it returns to become unstable, i will downgrade to V 2.5 again.
I'll keep you informed.

yes for this particular "white screen" issue it will be useful to hear how things go - thanks
Mike

White screen - in my case definitely a hardware issue
Hi folks,
i was testing and playing around with my Hermes and today i found the problem (very funny because now i can't reproduce it anymore but just read ahead).
Today i was playing around and after pressing by accident on the case of the Hermes, the screen appeared disappeared and changed into white.
Please download the video i recorded from the attached link - you'll see that it was able to reproduce it by tapping on the case:
http://asuka.descipe.de/dphome/test/HTC_Hermes_White_Screen_issue.mp4
Please use VLC or MPC (additional codecs required) to watch the movie.
Honestly i'm not sure if this can be reproduced by anyone but this makes the whole situation much more clear.
Any feedback is welcome.
Cheers

What problems to look for when buying a 2nd hand hermes?

I think this information might be useful for lots of people.
The question is: What problems should we look for when wanting to buy a second hand hermes, and how to look for them?
Everyone who's had problems with herms or knows about them should give an oppinion.thanks

Watch out for:
High frequent tone, ONLY when the display is on. Very annoying.
My phone has been to the shop for 3 times. Now I have got a new phone!
But I miss my HTC......

i had that one too, on the day i bought the 2nd hand tytn. changed the radio and rom and it went away. then the battery started heating, but i don't know if it heated before too

1). turn device on if you can.
2) sceen alignment and whitescreen - some people have the whitescreen problem, to see if it could be in yours(one type anyway) run your finger down to the bottom right at the side lcd screen (not on the screen, the casing) til you are about 2/3 of the way down from the top. lightly increase pressure and see if it starts going white. Please note this is a specific type of whitescreen which can be fixed BUT will have the warranty voided to do so. Try running a screen alignment (ask if FTouch flo is on the phone & active as this will stop this working and require a soft reset to fix)
2). test the buttons usually the bottom buttons ie. hotkeys, answer/hangup. but dont forget to check out the slideout keyboard too.
3). check to see if the battery gets hot or if there are any "hot spots" on the case. this indicates problems too. there may be a short somewhere on the hermes that is draining power REALLY quickly or may be affecting if power gets to where its needed.
4). soft reset and check if "no GSM" flashes up in the loading stage as this shows its a brick with a corrupted radio rom. this may be fixable but for me personally it would be bought only for parts (and would have to be cheap).
This is what I'd do as it is fairly quick BUT ths works only if you can see the device before you buy it otherwise you may be in for a nasty surprise.
Hope this helps...

hostedrage said:
The question is: What problems should we look for when wanting to buy a second hand hermes, and how to look for them?
Click to expand...
Click to collapse
While it's not exactly a problem, it could be a warning that problems may happen in the future.
Check the stickers under the battery, make sure the VOID sticker is intact and the (at least mine had one) reflective sticker is also intact.
Check the model and IMEI listed on the sticker, then compare it to the model and IMEI listed under the Identity tab in Device Information (Start -> Settings -> System -> Identity tab). This could give away someone trying to sell a HERM100 model as a new HERM200 (and asking a higher price), or a phone that may have been dropped and damaged. Also check the call duration tab if it's being sold as 'low use' (true, this can be cleared, but it's not exactly a couple of taps to do it).
At the very least, this could save the buyer some dosh and expose the seller as the potentially slimy person they are.

White screen mda vario 2
Hi,
I have purchased a mda vario 2, last november, with only 3 months waranty, now I`m having problems.
I have had my screen going white, some times if I go into landscape mode or turn the light on and off by means of pressing the power buton quickly the screen comes back, then the screen sometimes goes all blurry.
Now the phone wont come back on at all, all I get is this white screen, the screen lights up but just a white screen, nothing else.
So I bought a new screen from E-Bay and I connected it up to my phone but I get the same, the screen lights up, same old white screen.
Nothing else, If anyone knows what this problem is I would be very grateful.
It was a shop I brought the screen from off of E-Bay, I asked prior to purchasing this screen if it would be compatible with my phone and they told me that it was.
Many Thanks for any help, ideas what this could be.

Roy2008,
Not nice of you to hijack someone else's thread.
Anyway, read the following thread for information: http://forum.xda-developers.com/showthread.php?t=321163

li-ion have a limited number of hours before it dies i would check batt time of cause thats kinda problematic to test

I appologize if I hijacked someone else`s thread.
As I am new to this site I thought that you just use it like you do in a chat room.
I guess I was wrong, I`ll try to figure out how you use this site without annoying anyone.
My Appologies.
Anyways, Thankyou for your help, and for the hijacking part.

thinking of buying a hermes
I've been reading through out the forums because I am seriously thinking of buying this phone, a second-hand because I can't afford a brand new one. I'm a bit worried about the Whitescreen and D-pad failures thread, it seems it's the usual or maybe common problem of this model. So I have some questions before I do get this model.
-How would I know if the phone has been opened for repairs?
because I read here that you need to open the phone to fix the whitescreen prob.
-Do I look for one that has FTouch flo to check the screen alignment?
is there any other way to do this just in case the phone doesn't have one installed.
-How long does the battery last if you only use it for texting, wifi and making short calls? Also about the battery heating up, does it mean while it's idle? Is it sometimes normal for batteries to heat/warm up?
-ultramag69
sceen alignment and whitescreen - some people have the whitescreen problem, to see if it could be in yours(one type anyway) run your finger down to the bottom right at the side lcd screen (not on the screen, the casing) til you are about 2/3 of the way down from the top. lightly increase pressure and see if it starts going white. Please note this is a specific type of whitescreen which can be fixed BUT will have the warranty voided to do so
Are there other more ways to check if symptoms of whitescreen is present? I'd really like to be thorough because I'm pretty sure the ones that I can afford would not have any warranty anymore.
The ff. are the things I think I should do to make sure the phone is in good condition:
Make a call
Send SMS
Try wifi
Use the camera
Check all keys/buttons on the front, sides and dpad if all working
Bluetooth
Try a memory card
Pls. advice me if I've forgotten anything else.
I'm actually choosing between Hermes and HTC Elf, I'm leaning more to the Hermes because of the Dpad and it's slightly cheaper than the Elf.
Thanks in advance!

Also check the external speaker, I have four that I tweak, and two had loose speaker connections(made a good deal for me). It's an easy fix, I got the tool at radio shack. BTW these units are out of warranty.

Ok I'll add that.
Anything else?

Essentially a good indication of a possible whitescreen issue is the buttons on the front not working.
To check to see if its been opened look under battery as jdc said, theres a small white sticker over a screw on the right hand side thats says Void if removed, If can see a screw under the flash LED, then its been opened.
Cheers...

Help! Issues with my Qtek 9100/i-mate k-jam

Hi everybody,
I recently received a Qtek 9100 from a friend, but I'm having some issues with it.
Firstly, it has Windows Mobile 6.5 installed and I'd like to revert to the OEM version, 5.0, hoping for it to be less buggy, but I could not find a decent method. Could anyone advise, please?
Secondly, I'm having some issues with the display. At first I suspected a hardware issue, now I'm not that sure about it.
So,... after freezing (as WM6.5 seems to have this function really well implemented), I reset the device and instead of the boot screen I got a flickering light screen with all sorts of horizontal and vertical lines. I checked with eBay, found a new screen at a decent price and just as I was about to order the new screen, the display started working again, until last night when a soft reset sent it back where we started from, meaning all sorts of lines.
Now I'm thinking it's either a hardware issue such as a bad contact, or the lines are caused by the damn WM6.5. I'm leaning towards the hardware problem, since the boot loader doesn't show properly either.
Any advices would be greatly appreciated. Thanks in advance

It can be Omap overclocking. Try to look at the wiki for a original rom for your phone

it's hard to say what rom it had since i got it with wm6.5.
i found a link on this forum to a file called RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_cingular.rar
it seems to be one of the many originals, so i'll try to flash this one as soon as i can figure out the connection issue with ActiveSync. I tried both 4.0 and 4.5 but they both fail to connect i need to fix the pda's display (or wait until it solves itself, like the previous time) in order to troubleshoot the connection error

Can you get into bootloader?

no, i keep getting those flickering horizontal and vertical lines. the odd piece is that anything else besides the connection seems to work. my guess is that the active sync connection can be solved via connection manager, but since i cannot see a damn thing... it's gonna be complicated.
my best guess is to buy a new display from ebay since i found some real cheap ones ($9) and replace it, hoping this would solve the hardware issue.
is there anybody else who got those mad lines? perhaps there's a less complicated solution to this problem that you would like to share

apparently, this is not a common issue, good to know
nobody had horizontal and vertical flickering lines?

[HUAWEI P10 LITE] Screen burn, ghost images, but it's temporal

I'm new to this forum, so I posted in general this problem I'm having since I don't know which category fits for this.
I know this forum is for software-related topics, but I've found hardware questions as well, so I guess this should be fine.
Basically, some time ago my phone started having this problem, which I suspect is hardware related, which is what they call screen burn.
Funny thing is, people usually say this problem is permanent, but in my case it's just temporal.
Sometimes my screen is working just fine, and suddenly starts flickering. If I try to switch apps, a "ghost image" of the other app stays there in the background, and until the screen refreshes, it takes time, or maybe I have to switch my screen on-off again, etc.
Another times It turns white, but I still can use my phone properly.
I've identified it's just a screen issue, because as I said, I can actually use my phone fine, but I have this flickers and ghost images. These ghost images are actually the most annoying problem when they happen.
To do some testing, I downloaded a burn-in test app to check every colour, and I've noticed that most colours work fine, but just the white and grey were weird? Like, maybe in the top of the screen the colour wouldn't show, but in the rest of the screen it was working.
Other times, the screen starts to display "colour lines" in front of everything, and after some time they disappear.
Want I want to know is, is this a hardware problem, or software? I guess it's hardware, I'd find it weird to be software.
If so, changing the screen would fix this ghost images and flickers? I haven't tried changing a phone screen before, but I can just buy one and there are videos for my model on how to change the screen so I could do it.
What I want to know is, how to fix this, and If replacing the screen would do. I honestly am against the consumerism trend of throwing away phones, so I at least want to try.
Thanks.

adrianjaramillo said:
I'm new to this forum, so I posted in general this problem I'm having since I don't know which category fits for this.
I know this forum is for software-related topics, but I've found hardware questions as well, so I guess this should be fine.
Basically, some time ago my phone started having this problem, which I suspect is hardware related, which is what they call screen burn.
Funny thing is, people usually say this problem is permanent, but in my case it's just temporal.
Sometimes my screen is working just fine, and suddenly starts flickering. If I try to switch apps, a "ghost image" of the other app stays there in the background, and until the screen refreshes, it takes time, or maybe I have to switch my screen on-off again, etc.
Another times It turns white, but I still can use my phone properly.
I've identified it's just a screen issue, because as I said, I can actually use my phone fine, but I have this flickers and ghost images. These ghost images are actually the most annoying problem when they happen.
To do some testing, I downloaded a burn-in test app to check every colour, and I've noticed that most colours work fine, but just the white and grey were weird? Like, maybe in the top of the screen the colour wouldn't show, but in the rest of the screen it was working.
Other times, the screen starts to display "colour lines" in front of everything, and after some time they disappear.
Want I want to know is, is this a hardware problem, or software? I guess it's hardware, I'd find it weird to be software.
If so, changing the screen would fix this ghost images and flickers? I haven't tried changing a phone screen before, but I can just buy one and there are videos for my model on how to change the screen so I could do it.
What I want to know is, how to fix this, and If replacing the screen would do. I honestly am against the consumerism trend of throwing away phones, so I at least want to try.
Thanks.
Click to expand...
Click to collapse
Hi...
so it could be software or hardware based.
first i would make a full backup and then try to completly reset the firmware and check if the issue is done
if not...it could be the screen or the mainboard or the connector to the mainboard.
at first i would try to change the screen to a new one. mostly the screen have problems. if that not work it can be the mainboard...for a buying a mainboard i would look at ebay for a completly damage devices just to remove the mainborad there and to buod in to your Device
hope that helps you
solong
speedson

speedson said:
Hi...
so it could be software or hardware based.
first i would make a full backup and then try to completly reset the firmware and check if the issue is done
if not...it could be the screen or the mainboard or the connector to the mainboard.
at first i would try to change the screen to a new one. mostly the screen have problems. if that not work it can be the mainboard...for a buying a mainboard i would look at ebay for a completly damage devices just to remove the mainborad there and to buod in to your Device
hope that helps you
solong
speedson
Click to expand...
Click to collapse
I commented my problem with a friend who studied CS with me, and he told me after seeing the phone that in his opinion it's likely the screen. I think so too.
It's ebay a decent play for buying a screen? Or better aliexpress? I've seen screens for huawei p10 lite in aliexpress

adrianjaramillo said:
I commented my problem with a friend who studied CS with me, and he told me after seeing the phone that in his opinion it's likely the screen. I think so too.
It's ebay a decent play for buying a screen? Or better aliexpress? I've seen screens for huawei p10 lite in aliexpress
Click to expand...
Click to collapse
Hi...
Idk if ebay or Alie would be better. I would take a look wich one could send it fastest to me and if it is original Part or from another manufacture.

Hello, I've been experiencing same kind of issues in recent months and I'm interested how the story continued and did fixing the screen was the solution?
Thanks in advance.