Hi *.
I've managed to torn flex with 5 buttons Until I found one to replace, I need to adjust HD2 to be usable without them. Without "menu" and "back" I can live, "call" is replaced with manila shortcut to "Phone". Two buttons left - "home" and "end call/power".
I've installed AEBPlus and old volume control, to be able to map volume keys. Long up is mapped to "show today" and it's almost working - hides current application, but doesn't switch to main manila tab. Is there a way to do this?
The bigest problem is with long pressed vol. down. I've assign it to "Switch display Off/On". First function [switching off] works flawless, but waking device doesn't.
Sure there's "shake 'n' wake" and it works great, but hard to call it convenient. Sometimes I have to shake it hard for over a second to wake up. Lookin' like an idiot Is there a way to wakeup HD2 with vol.down.? I'd really appreciate this.
Shameless bump. No idea why, but shake'n'wake stopped workin' (I haven't changed anything) Few restarts didn't help. So right now I can't put HD2 into sleep, or even lock the screen - because there's no way (or at least I don't know it) to prevent lock screen from suspending device.
500£ device unusable because of stupid flex worth quid or two
[HKEY_CURRENT_USER\ControlPanel\Keybd]
"DefaultKeyLock"= 0
restart。。。done
http://ip208-100-42-21.static.xda-developers.com/showthread.php?t=470807
Related
Does anyone know if there's any type of hack to enable a different button on the Cingular 8525 to be the power on button? Being right-handed, when I pulll out the phone, it's annoying to have to use 2 hands to turn on the phone. I have the AEBPlus program but it only lets you assign a different button to power "off" the phone. I'm looking for a way to program a button on the left-hand side (possibly button 5 [ptt button] or the Windows button [labeled "ok] to power on the phone). Anyone have any ideas?
I guess no, power buttons on almost devices is connected directly to procesor (like reset button and watchdog circuit), and in fact if device is off, no system loaded, there is no way to adjust registry settings to change this.
might sound stupid, but you can try to hold the phone differently? i operate the phone with both hands (am right handed) and either way, you can power on/off the phone with 1 hand.
if holding it in the left hand, use your left hand's index finger wrapped around the back of the phone.
if holding it in the right hand, use the thumb of your right hand.
i know it isn't the solution you were looking for, but it might help
Yeah, I figured that I could do that. It's just that when I wrap my hand around like that, i have a tendency to push out the keyboard and then I have to go back to 2 hands anyway.
In using AEBPlus (or even the default commands under the "buttons" settings) and it wouldn't be so bad if I could figure out a way to get the screen to come back on. But even when I try and set one of the buttons on the right to "screen on/off" it will turn off the screen but won't turn it back on. I'm not talking about a powering on/off of the phone. I'm just talking about a way to turn on/off the screen.
never mind. I figured it out. I had the "key lock" set to the fact that the only button that would turn on the device (if the screen was off) was the power button. I fixed that. Now I'm good to go.
Hi all,
I've had my touch hd for a few days now and overall im very hapy with it but the volume button on the side is driving me mad. It's very large and very sensitive so im constantly pressing it. Can it be disabled any way?
On another note im having a minor issue with sms alerts in touchflo. sometimes when I get a new message and have read it in touchflo the green '1' will stay indicating that I have an unread message until I go into my actual inbox and have opened it in there. Again, any advice appreciated
dayloon said:
Hi all,
I've had my touch hd for a few days now and overall im very hapy with it but the volume button on the side is driving me mad. It's very large and very sensitive so im constantly pressing it. Can it be disabled any way?
On another note im having a minor issue with sms alerts in touchflo. sometimes when I get a new message and have read it in touchflo the green '1' will stay indicating that I have an unread message until I go into my actual inbox and have opened it in there. Again, any advice appreciated
Click to expand...
Click to collapse
Yes. Install AEBplus. Then, configure the single press of volume buttons to something like Up and Down Arrow Key, and Double Press to Volume Up and Down.
It this way, when you touch the rocker, it meanly send an up arrow signal, which for most situation is not going to do anything. When you really want to change volume, double press it. Alternatively, you could configure long press to change volume.
With this setting, you will be able to change your music track and radio channel too, as the Up Down arrow keys are those players use to change track/channel.
Yes, the volumn buttons are very sensitive, so AEB+ is a must to install!
I use D810 for over 2 years, and scroll wheel is very handy to me, so I just config volumn buttons in HD to be up & down button. It can help some, but not all.......
Aside from the rocker volume being touched accidentally, the green phone button can also be touched accidentally. If you do it twice, it makes a call without you even knowing.
So, I do the same. Single press will start my AgePhone, double press for normal phone. In this way, the phone does not dial out unless I want it do.
Yep, AEB plus will be your answer. You can also configure this to do nothing on single press and then volume up/down on double, triple or long press.
Just bought my HD and is loving it. However, the lack of physical buttons is quite frustrating, especially when I am driving.
I like to listen to music with the screen turned off. However, when the screen is off, all the virtual buttons are disabled. Only the physical buttons like the volume and power are active.
Does anyone know if there is a way to enable the virtual buttons even when the screen is off?
i too would be very interested in this. the buttons are not capacitive, but still the ability to wake / power on the phone using the front buttons would be cool
Unfortunately the use of the hardware keys are disabled whilst in standby mode and this cannot be changed
However you can use 3rd party apps like AEBPlus to map other functions to buttons like vol up
i.e.
Volume Up button
One short press > move up
two short press > play
Long press > volume up
and this can be duplicated with different functions to other buttons
Try doing a search for AEB Plus and read up on it. Also search this forum for other methods
Fallen Spartan said:
Unfortunately the use of the hardware keys are disabled whilst in standby mode and this cannot be changed
However you can use 3rd party apps like AEBPlus to map other functions to buttons like vol up
i.e.
Volume Up button
One short press > move up
two short press > play
Long press > volume up
and this can be duplicated with different functions to other buttons
Try doing a search for AEB Plus and read up on it. Also search this forum for other methods
Click to expand...
Click to collapse
I am already using AEBPlus but I need more than 2 buttons. The mapping is done by the application, PocketPlayer, and it doesn't support double press.
Interestingly, when you are making a phone call, the screen will go off initially. You can actually press one of the virtual button to turn the screen back on. So I thought there might be a way to achieve this...
How is your screen getting turned off? By PocketPlayer or by the system's energy-settings? Possibly try Display Switch (yet another little app as Part of psshutXP) for this. Found this in my Touch (ELF) Rom and use it for any app, that doesn't support display-switching itself. Keeps my (hardware)-buttons funktional...
references: http://forum.xda-developers.com/showthread.php?t=320450
or http://forum.xda-developers.com/showthread.php?t=463064
Annoying Touch buttons
I think that the most DHD users have the same problem, touching the buttons at the bottom if you really dont want to.
So my question is if it would be possible to change the "Home" or the "Menu" button (pushing long) from "last used apps" to "turn on/off the touch keys???
that would be awsome
thx Dr.Pepper
Never been an issue for me, although i was anticipating problems with no hardware buttons its been fine...
Pepper90 said:
I think that the most DHD users have the same problem, touching the buttons at the bottom if you really dont want to.
So my question is if it would be possible to change the "Home" or the "Menu" button (pushing long) from "last used apps" to "turn on/off the touch keys???
that would be awsome
thx Dr.Pepper
Click to expand...
Click to collapse
Can't help but say, "you're holding it wrong!"
Seriously though I've never encountered this problem on either this phone or my N1 which has a smaller screen.
How exactly are you managing to press the buttons by mistake?
Regards.
iam the only one who has the problem that he accidently hits a touch key while using the phone or playing a game? every little contact triggers the keys. i.e. if i use the thumb to type a message, holding the phone in the right hand, i sometimes trigger the search key.
my idea is to make it harder to trigger these keys. as they are part of the touchscreen, it sould be possible to do anything that can be done with the touch sreen. my ideas:
1. double-touch; tapping the key 2 times (like a double-klick) triggers it once
2. sweep; i.e. you touch the home-button and sweep out of it, then release. can be even harder with sweeping out and back in.
3. circle-touch; making a little circle over the button triggers it.
other ideas welcome.
---------------------------------
2nd problem: easier unlocking;
i feel it sometimes tricky to unlock the pone, wich is done by pressing the powerbutton at the top of the phone and sweeping on the bottom of the screen. the phone is'nt very small (or i have small hands). if iam holding the phone at the bottom, i can nearly reach the whole touch area with my thumb, but to unlock, i need to use my 2nd hand or to juggle the phone so i can reach the power button with the right hand. with the G1, which had a menu button at the bottom, it was just double-pressing that button and the phone was unlocked. iam looking for a similar easy way to do it.
its just annoying to take the phone out of the pocket and use both handy or juggle around to unlock it...
i dont know it it wastes additional energy to have the touchscreen active, so it can be used to unlock the phone. so my ideas:
1. use the touchscreen to unlock; i.e. draw a pattern, press the bottom key in some order (home, back, menu to unlock)
2.1 use the volume keys. if the screen is disabled, they are used to change the audio volume (or is that only the case, if music is playing?) When holding the phone at the bottom with the right hand, the volume-down hey is easily reachable. so you can do volume-down (which activates the screen) and then slide on the screen like you would do if you have pressed the power button. pressing volume-down with deactivated screen does not change the volume, but pressing it twice does (i.e. 1st press unlocks the screen and 2nd press takes volume down).
2.2 press vol-up and vol-down at the same time to unlock the phone. if i do that the phone vibrates sometimes, no idea why.
3. use acceleromater (or a other sensor?) to unlock, i.e. shaking the phone in a special way (i.e. a circle), activates the screen, so you can unlock it by sliding on it. also full unlock by shaking a phone could be possible (also known as kung-fu-unlock )
other ideas also welcome.
Proximity sensor for unlock when taking it out of the pocket :-D. I have the same problem as you so a 'fix' would be nice
yeah, you take the phone out of the pocket and it unlocks and says "hello raw, how you are doing?".
but that would be nice. question is if constantly checking the prox sensor would drain the battery much. it needs to be checked every 3 seconds or so.
lynxboy said:
Can't help but say, "you're holding it wrong!"
Seriously though I've never encountered this problem on either this phone or my N1 which has a smaller screen.
How exactly are you managing to press the buttons by mistake?
Regards.
Click to expand...
Click to collapse
if i try to use the phone with one hand
seems like here (http://forum.xda-developers.com/showthread.php?t=854073) is another user with that problem.
same problem: http://forum.xda-developers.com/showthread.php?p=9550179#post9550179
Merged threads as topic is similar....
Cheers,
M_T_M
New guy here!
I'm from holland and I have a 2009 hd2 which is currently running AOKP Milestone 5 SE
So this is my first guide and i'll start with something simple.
Eliminating those frustrating pocket unlocks and the screen turning on in your pocket which drains your battery.
The easiest option is to start using your volume rocker as a unlock button and removing all the front button mappings for waking your phone.
Your power button is still your lock button though.
1. Find out if your rom has any special rom options (e.g. rom control, some toolbox, cynogen mod options etc)
2. Go through those options and try to find something with volume wake, it's probably under lockscreen options.
3. If you have found the option enable it, if not you have to download WidgetLocker in the market it comes with the option in it.
4. Once you've tested it we can begin with disabling the front keys by downloading ButtonRemapper in the market.
5. Now when you're in the app, you are seeing a list of key numbers with their name and function behind it. key number 116 is the only one you need to keep on its original state, it is for the power button when the phone is unlocked.
6. Start by clicking a key and putting its state in NONE and press ok, now do this for the remaining keys, EXCLUDING 116.
7. Hit the apply button and see your hd2 hot rebooting
8. When the phone comes to its senses again, try it out!
Lock with your power button
Unlock with your volume rocker.
It almost feels like a modern android phone with the lock/unlock button on the top or side.
I hope you like it, because I really do!
3ll0s said:
New guy here!
I'm from holland and I have a 2009 hd2 which is currently running AOKP Milestone 5 SE
So this is my first guide and i'll start with something simple.
Eliminating those frustrating pocket unlocks and the screen turning on in your pocket which drains your battery.
The easiest option is to start using your volume rocker as a unlock button and removing all the front button mappings for waking your phone.
Your power button is still your lock button though.
1. Find out if your rom has any special rom options (e.g. rom control, some toolbox, cynogen mod options etc)
2. Go through those options and try to find something with volume wake, it's probably under lockscreen options.
3. If you have found the option enable it, if not you have to download WidgetLocker in the market it comes with the option in it.
4. Once you've tested it we can begin with disabling the front keys by downloading ButtonRemapper in the market.
5. Now when you're in the app, you are seeing a list of key numbers with their name and function behind it. key number 116 is the only one you need to keep on its original state, it is for the power button when the phone is unlocked.
6. Start by clicking a key and putting its state in NONE and press ok, now do this for the remaining keys, EXCLUDING 116.
7. Hit the apply button and see your hd2 hot rebooting
8. When the phone comes to its senses again, try it out!
Lock with your power button
Unlock with your volume rocker.
It almost feels like a modern android phone with the lock/unlock button on the top or side.
I hope you like it, because I really do!
Click to expand...
Click to collapse
Nice guide! Very similiar to my original mod here but you make it a bit more simplified xD
After removing WAKE and WAKE_DROPPED from the keys, clicking buttons doesn't wake the screen (as expected), but lights the buttons, and they stay lit forever (i.e. until the next unlock/lock).
Do you also experience the same thing? Any solution?
d4v0r said:
After removing WAKE and WAKE_DROPPED from the keys, clicking buttons doesn't wake the screen (as expected), but lights the buttons, and they stay lit forever (i.e. until the next unlock/lock).
Do you also experience the same thing? Any solution?
Click to expand...
Click to collapse
Yes this is normal, caused by a gpio wake lock from the kernel. No solution yet, I personally don't care as it drains a lot less battery than having your screen come on
Sent from my HTC HD2 using Tapatalk
elesbb said:
Yes this is normal, caused by a gpio wake lock from the kernel. No solution yet, I personally don't care as it drains a lot less battery than having your screen come on
Sent from my HTC HD2 using Tapatalk
Click to expand...
Click to collapse
gpio don't need wakelocks in kernel, when interrupt is raised, cpu exits suspend and services the raised gpio interrupt. This is problem with bad coding logic of the key's backlight driver, i will see what can be done in some days (really busy atm).
Rick_1995 said:
gpio don't need wakelocks in kernel, when interrupt is raised, cpu exits suspend and services the raised gpio interrupt. This is problem with bad coding logic of the key's backlight driver, i will see what can be done in some days (really busy atm).
Click to expand...
Click to collapse
This is still kernel related though right? as it deals with the driver? And you really dont have to work on it its not that big of a deal, put it on lowwwww priority you do amazing work here so as it is
the most important thing is to not keep anything else metal and/or hard, in your pocket with the hd2. Items like batteries or keys
3ll0s said:
...
Lock with your power button
Unlock with your volume rocker.
...
Click to expand...
Click to collapse
This idea is awesome, thank you!
I've customized it a little bit to save my power button (and so my touchscreen connector).
I've set all my hardware buttons to power, but without wake property.
Now, I can:
Lock with any hardware button
Unlock with volume rocker.
thanks a lots aha