power button hack for Cingular 8525? - 8525, TyTN, MDA Vario II, JasJam General

Does anyone know if there's any type of hack to enable a different button on the Cingular 8525 to be the power on button? Being right-handed, when I pulll out the phone, it's annoying to have to use 2 hands to turn on the phone. I have the AEBPlus program but it only lets you assign a different button to power "off" the phone. I'm looking for a way to program a button on the left-hand side (possibly button 5 [ptt button] or the Windows button [labeled "ok] to power on the phone). Anyone have any ideas?

I guess no, power buttons on almost devices is connected directly to procesor (like reset button and watchdog circuit), and in fact if device is off, no system loaded, there is no way to adjust registry settings to change this.

might sound stupid, but you can try to hold the phone differently? i operate the phone with both hands (am right handed) and either way, you can power on/off the phone with 1 hand.
if holding it in the left hand, use your left hand's index finger wrapped around the back of the phone.
if holding it in the right hand, use the thumb of your right hand.
i know it isn't the solution you were looking for, but it might help

Yeah, I figured that I could do that. It's just that when I wrap my hand around like that, i have a tendency to push out the keyboard and then I have to go back to 2 hands anyway.
In using AEBPlus (or even the default commands under the "buttons" settings) and it wouldn't be so bad if I could figure out a way to get the screen to come back on. But even when I try and set one of the buttons on the right to "screen on/off" it will turn off the screen but won't turn it back on. I'm not talking about a powering on/off of the phone. I'm just talking about a way to turn on/off the screen.

never mind. I figured it out. I had the "key lock" set to the fact that the only button that would turn on the device (if the screen was off) was the power button. I fixed that. Now I'm good to go.

Related

button to shut down and wake up ppc

okay, i have a strange feeling i'm making this more difficult than it should be ....but here goes.
I want to map one of my soft keys to shut down (or suspend) my ppc and then ONLY that same button to wake it up. I've tried several of the device lock programs, but they seem to just turn off the screen. i know i can use the power button on top, but i'd prefer it to be done with another button.
Possible???
thanks
js

Power ON (button) settings

Currently, I can only power on my phone via the power button, but at some point I had something installed (or tweaked some registry setting or something so that I could also press the green/phone button and that would also wake it up. All the other buttons - except power and phone - were locked out and did nothing (once I powered off). Now I can't recall how in the world I did that. Can anyone help me on this? Pleeease?
Deuce Nitro said:
Currently, I can only power on my phone via the power button, but at some point I had something installed (or tweaked some registry setting or something so that I could also press the green/phone button and that would also wake it up. All the other buttons - except power and phone - were locked out and did nothing (once I powered off). Now I can't recall how in the world I did that. Can anyone help me on this? Pleeease?
Click to expand...
Click to collapse
On mine, it's a setting under keylock.
Start -> Settings -> System
Yeah, I have that, too, but my options are...
Lock all buttons except Power button
Lock buttons if device is locked
Do not lock buttons
If I choose option 2, any of the HW buttons will wake it up. But I used to have it set so that only the power button OR the phone button would wake it up. The messaging, IE, camera, etc. buttons would not wake it up.
Are you saying that you have the option for just the power and phone buttons? If so, maybe it's an OS issue? I'm running WM6.1...
There is no such option for just the power and phone buttons under keylock. Just the 3 options u saw! Maybe a 3rd party app...
I guess it must have been a 3rd party app, then, or something that applies tweaks, but I've looked in AdvancedConfig and SKTools and I don't see it anywhere.
I know I did it somehow. Just hoping someone will recognize this and know how it's done.

Turn on Screen button

Is there any way to change the key to turn on the screen? The Power button is on the top and I bet most people hold the bottom of the phone, I can't reach the top button with one hand....
Thanks,
RayYung said:
Is there any way to change the key to turn on the screen? The Power button is on the top and I bet most people hold the bottom of the phone, I can't reach the top button with one hand....
Thanks,
Click to expand...
Click to collapse
You can try mapping it with this program.
I haven't tested on power button though.
Although it would work if I map the 'END' button to "screen power toggle". I also lost the End funtion....
Do you guys use two hands to turn on the screen everytime you use? I was so used to My Treo Pro that I can use the END key to turn on the screen...
Thanks,
First, there's a never version of keyboardcontrol.
Second, you have to set end key normal standard and e.g. longpress to turn on.

[Q] Making touch keys less touchy/easier unlock

Annoying Touch buttons
I think that the most DHD users have the same problem, touching the buttons at the bottom if you really dont want to.
So my question is if it would be possible to change the "Home" or the "Menu" button (pushing long) from "last used apps" to "turn on/off the touch keys???
that would be awsome
thx Dr.Pepper
Never been an issue for me, although i was anticipating problems with no hardware buttons its been fine...
Pepper90 said:
I think that the most DHD users have the same problem, touching the buttons at the bottom if you really dont want to.
So my question is if it would be possible to change the "Home" or the "Menu" button (pushing long) from "last used apps" to "turn on/off the touch keys???
that would be awsome
thx Dr.Pepper
Click to expand...
Click to collapse
Can't help but say, "you're holding it wrong!"
Seriously though I've never encountered this problem on either this phone or my N1 which has a smaller screen.
How exactly are you managing to press the buttons by mistake?
Regards.
iam the only one who has the problem that he accidently hits a touch key while using the phone or playing a game? every little contact triggers the keys. i.e. if i use the thumb to type a message, holding the phone in the right hand, i sometimes trigger the search key.
my idea is to make it harder to trigger these keys. as they are part of the touchscreen, it sould be possible to do anything that can be done with the touch sreen. my ideas:
1. double-touch; tapping the key 2 times (like a double-klick) triggers it once
2. sweep; i.e. you touch the home-button and sweep out of it, then release. can be even harder with sweeping out and back in.
3. circle-touch; making a little circle over the button triggers it.
other ideas welcome.
---------------------------------
2nd problem: easier unlocking;
i feel it sometimes tricky to unlock the pone, wich is done by pressing the powerbutton at the top of the phone and sweeping on the bottom of the screen. the phone is'nt very small (or i have small hands). if iam holding the phone at the bottom, i can nearly reach the whole touch area with my thumb, but to unlock, i need to use my 2nd hand or to juggle the phone so i can reach the power button with the right hand. with the G1, which had a menu button at the bottom, it was just double-pressing that button and the phone was unlocked. iam looking for a similar easy way to do it.
its just annoying to take the phone out of the pocket and use both handy or juggle around to unlock it...
i dont know it it wastes additional energy to have the touchscreen active, so it can be used to unlock the phone. so my ideas:
1. use the touchscreen to unlock; i.e. draw a pattern, press the bottom key in some order (home, back, menu to unlock)
2.1 use the volume keys. if the screen is disabled, they are used to change the audio volume (or is that only the case, if music is playing?) When holding the phone at the bottom with the right hand, the volume-down hey is easily reachable. so you can do volume-down (which activates the screen) and then slide on the screen like you would do if you have pressed the power button. pressing volume-down with deactivated screen does not change the volume, but pressing it twice does (i.e. 1st press unlocks the screen and 2nd press takes volume down).
2.2 press vol-up and vol-down at the same time to unlock the phone. if i do that the phone vibrates sometimes, no idea why.
3. use acceleromater (or a other sensor?) to unlock, i.e. shaking the phone in a special way (i.e. a circle), activates the screen, so you can unlock it by sliding on it. also full unlock by shaking a phone could be possible (also known as kung-fu-unlock )
other ideas also welcome.
Proximity sensor for unlock when taking it out of the pocket :-D. I have the same problem as you so a 'fix' would be nice
yeah, you take the phone out of the pocket and it unlocks and says "hello raw, how you are doing?".
but that would be nice. question is if constantly checking the prox sensor would drain the battery much. it needs to be checked every 3 seconds or so.
lynxboy said:
Can't help but say, "you're holding it wrong!"
Seriously though I've never encountered this problem on either this phone or my N1 which has a smaller screen.
How exactly are you managing to press the buttons by mistake?
Regards.
Click to expand...
Click to collapse
if i try to use the phone with one hand
seems like here (http://forum.xda-developers.com/showthread.php?t=854073) is another user with that problem.
same problem: http://forum.xda-developers.com/showthread.php?p=9550179#post9550179
Merged threads as topic is similar....
Cheers,
M_T_M

Any tricks to save power button?

I find power button is extensively used during EVO operation. Each time I want to check the the screen, or after making a call, I have a press that small tiny little power button to light up the screen. I am not sure whether this button is the weakest part of EVO.
Are there any tricks to save the use of this button?
http://www.xda-developers.com/android/a-concerning-amount-of-evo-users-report-power-button-crack/
No crack here so looks like they fixed it.
For tricks. Get an app that will turn the screen off. Change the setting to keep the screen on longer so if you are reading something it won't turn off. Have someone call you so the screen turns on and you don't have to use the power button.
Might be a way to use the volume rocker to turn the screen on. Have not looked into that since I am not concerned about my power key not working.
Aosp roms have configurations that allow you to turn the screen on and off without using the power button. Plus theirs an app in the market called screen locker that allows you to shut the screen with the "search" soft key
Sent from my PC36100 using xda premium

Categories

Resources