Hey Guys,
Ive been using a trial of voice control for a few days now, and wondered wether i have to press my mapped button everytime i want to tell my xda what to do.
As far as i can make out, if i have to press a button each time, it looses its appeal quickly
I use the hands free xda headphones to command it, so while im on my bike it would be nice to tell media player what to do without pressing a button in my pocket each time.
Please help,
Adam
There is no "Microsoft Voice Control", neither there is a "Microsoft Voice Command Trial"...
Chatty said:
There is no "Microsoft Voice Control", neither there is a "Microsoft Voice Command Trial"...
Click to expand...
Click to collapse
I apologise, using the word "control" rather than "Microsoft Voice Command", and there is a trial of this software, im using it right now and I downloaded it from http://www.handango.co.uk/PlatformP...2&platformId=2&productType=2&productId=151270
So does anyone have an answer to my question above, do I have to press the button to start "Microsoft Voice Command" everytime I want to do somthing.
Thanks
i suspect that it does it like that because of cause if it would just catch the commands when ever spoken it would have to be turned on all the time
and if it were running like that it would be trying to recognize background noise and voices as commands all the time and use even more power and possible recognize some of the stuff as something and do odd things
I thought that might happen too, then i realised i have the 2 call buttons on the handsfree earphones that are easy to access (ref and green caller buttons) however i cant map these to voice control, does anyone know how to hack the button mapping ? like the volume sliders
You can only map buttons 1,2,3,and 4
Thanks everyone for your inputs, i have now managed to map the green or red buttons to anything i like, so now i can use my xda earphones green button to tell voice control what to do, works a treat, if anyone wants to know how, just ask.
adam_beasley said:
Thanks everyone for your inputs, i have now managed to map the green or red buttons to anything i like, so now i can use my xda earphones green button to tell voice control what to do, works a treat, if anyone wants to know how, just ask.
Click to expand...
Click to collapse
pls go ahead and post how u did it..
Go to http://ae.inc.ru/aebplus_t.html and install this simply utility onto your XDA (found searching on the forums earlier)
Once this is done, you can choose to unmap hardware buttons (red and green call buttons) as well as the volume slider etc etc
Then, like voice control requires, you go to control panel > buttons.
You will notice the usual "Button 1, Button 2" etc, however now you have the option to map "Green btn" or "Red Btn" (or any button you unmapped)
Link voice control to either of your choice, I used green for this test. Once you have done this, plug in your xda official headphones. You can then press the green button on the earphones to activate voice control, and therefore instruct it to do the usual things.
Tonight this was especially usefull on my bike to work, allowing me to change songs without having to stop and take my xda out my bag each time.
This obviously means you loose the use of the green button for accepting or making calls without remapping each time, the onlt workaround for this is having "Phone" on the start menu and just using the touch buttons on the dialer for calling etc.
Hope this is of use to some people out there, its certainly prompted me to buy the full voice control later today.
You can still use the green button to make calls!
Press the button and say 'CALL whoever'
although it isn't a good idea to make calles while on a bike anyway :lol:
Green Phone button mapping
@adam_beasley:
rather than place the phone icon (shortcut) in the start menu, why not map the phone to let's say contacts or calendar buttons?
you can also map 3 programs to a single button & access the programs by the number of press(es). program 1 = single press, program 2 = double press, and so on....
also, you may try to map the phone function as program 2 in the green button so that when you double press it will function as the usual phone button.
unluckily, I can't test & confirm to you since I haven't reinstalled it yet after the upgrade to WM2k5 V1.60a.
Cheers.
The problem i have from all of this, is that during playback on media player i toggle the screen off to save power, when i do this, my red or green buttons do nothing, even with button lock off.
So even tho this system works well, its flawed bigtime for me over this one problem, anyone have some ideas ?
Why don't you try turning the backlight down to 0%, but leaving the screen on? It's the backlight that is responsible for most of the battery drain.
You could make a profile in PocketZenPhone with all the settings for your audio playback (backlight, volume etc). I seem to remember there is a way to make PocketZenPhone change profile from a button press - you could map a double click of 'hang up' button to change profiles.
I also switch the screen off whilst listening to MP3s and have mapped the Action (joystick click) button to 'toggle' the screen display. In this mode pressing any other button does toggle the screen back on. I do not have the ButtonLock on as you can't then wake the machine up to accept a Voice Command. I have Voice Command currently mapped to the Record button on the side of the device but would like to map to the Green button. I would prefer single press - to answer the phone, double press - to activate Voice Command. I have e-mailed a few questions to the author of the AE Button Plus utility to confirm this can be done.
anybody want voicecommand
Email me i will attach to you.
If only we could map the BT headset to the green button....
Is there a way to get the BT headset into the option list for the green button. Is there some other BT program that facilitates the recognition of the main button of the BT headset?
AE Button Plus has inactivated several buttons in my Blue A
Well, it seems i should read with more attention, but now that the damage is done I hope someone can help.
I installed AE Button Plus in my Blue Angel, and as a result the ok and explorer buttons do not respond to anything anymore. I then unistalled the program, did a a full back up, a hard reset followed be restoration. Nothing has changed, these two buttons are still dead. The don't even show on the list of buttons anymore. Argggghhhh!!
Any help will be appreciated. Thanks
Hi, this is slightly off-topic, but I tried the PC version of Voice Command a long time ago (I don't think M$ still has it out on the streets), and it used to listen to every command, but won't do anything unless I begin the command with the word "Computer"... e.g. "Computer, what time is it?"
Wonder if there is such a switch for the O2... :roll: O2, what's my battery status :lol:
Re: AE Button Plus has inactivated several buttons in my Blu
gonzaloblanco1992 said:
Well, it seems i should read with more attention, but now that the damage is done I hope someone can help.
I installed AE Button Plus in my Blue Angel, and as a result the ok and explorer buttons do not respond to anything anymore. I then unistalled the program, did a a full back up, a hard reset followed be restoration. Nothing has changed, these two buttons are still dead. The don't even show on the list of buttons anymore. Argggghhhh!!
Any help will be appreciated. Thanks
Click to expand...
Click to collapse
This happened to me at first, but i think your biggest fault was backing up while having this error, now any restoration is going to have this fault.
Rather than uninstall, just try installing it again, however when then screen appears with buttons to handle (about 7 drop down boxes), just choose "Do Not Handle" on each button then soft reset, worked on mine, then I uninstalled it.
How to upload the files to ftp, i have voicecommand 1.5, it working fine with me.
Hi Guys,
this issue has been driving me slightly mad, tried searching with no luck, hopefully someone can help.
basically when i get an incoming call a) the flip phone over does not mute call, b) pressing the mute button on the incoming call screen does not work.
Now this used to work, and i have no idea what changed to cause it to stop.
i have checked the following :
regsitry - FaceDownMuteRing set to 1
HD Tweak tool - mute call is enabled
S2u2 - i have all phone settings off (callerID section set to off)
Now i do have AEbuttons installed which is probably the last thing i installed, on this i have mapped several buttons to the volume keys. Cant see this been an issue though.
Also, another issue which has developed is my backlight settings keep reverting back to timeout after 10 seconds everytime i reboot the device, could this be related.
any help will be much appriciated,
thanks
tas
taz2007 said:
Hi Guys,
this issue has been driving me slightly mad, tried searching with no luck, hopefully someone can help.
basically when i get an incoming call a) the flip phone over does not mute call, b) pressing the mute button on the incoming call screen does not work.
Now this used to work, and i have no idea what changed to cause it to stop.
i have checked the following :
regsitry - FaceDownMuteRing set to 1
HD Tweak tool - mute call is enabled
S2u2 - i have all phone settings off (callerID section set to off)
Now i do have AEbuttons installed which is probably the last thing i installed, on this i have mapped several buttons to the volume keys. Cant see this been an issue though.
Also, another issue which has developed is my backlight settings keep reverting back to timeout after 10 seconds everytime i reboot the device, could this be related.
any help will be much appriciated,
thanks
tas
Click to expand...
Click to collapse
Had the same problem. And exactly the same possible culprit. Thus, I decided to try restoring the volume keys to their default mappings in AEB, and alas, now the muting works when I press the mute button or face the phone down.
On the other hand, if you really need to map the volume buttons, I also discovered that while the mute button or facing the phone down would not mute the phone while it is ringing, pressing the volume down button will (assuming that it is not mapped in AEB).
Hope that helped!
vince_b said:
Had the same problem. And exactly the same possible culprit. Thus, I decided to try restoring the volume keys to their default mappings in AEB, and alas, now the muting works when I press the mute button or face the phone down.
On the other hand, if you really need to map the volume buttons, I also discovered that while the mute button or facing the phone down would not mute the phone while it is ringing, pressing the volume down button will (assuming that it is not mapped in AEB).
Hope that helped!
Click to expand...
Click to collapse
Hi Vince, nice one that was exactly the issue. Unmapped the buttons in AEB and it now all works..who would have thought. Now i have to decide what want the mute option or the mapped buttons
thanks
tas
Hello.
I have got salt on my HTC Touch HD, so the volume up button is from time to time "pressing itself". When it's not, the button don't work if I try to press it, but then suddenly it starts to increase the volume, even though I don't press it.
Now I would like to just disable it, since the physical button don't work anyway, so I can't use it anyway, it just irritates me.
So, any suggestions?
Thanks for ANY help I can get...
Hi *.
I've managed to torn flex with 5 buttons Until I found one to replace, I need to adjust HD2 to be usable without them. Without "menu" and "back" I can live, "call" is replaced with manila shortcut to "Phone". Two buttons left - "home" and "end call/power".
I've installed AEBPlus and old volume control, to be able to map volume keys. Long up is mapped to "show today" and it's almost working - hides current application, but doesn't switch to main manila tab. Is there a way to do this?
The bigest problem is with long pressed vol. down. I've assign it to "Switch display Off/On". First function [switching off] works flawless, but waking device doesn't.
Sure there's "shake 'n' wake" and it works great, but hard to call it convenient. Sometimes I have to shake it hard for over a second to wake up. Lookin' like an idiot Is there a way to wakeup HD2 with vol.down.? I'd really appreciate this.
Shameless bump. No idea why, but shake'n'wake stopped workin' (I haven't changed anything) Few restarts didn't help. So right now I can't put HD2 into sleep, or even lock the screen - because there's no way (or at least I don't know it) to prevent lock screen from suspending device.
500£ device unusable because of stupid flex worth quid or two
[HKEY_CURRENT_USER\ControlPanel\Keybd]
"DefaultKeyLock"= 0
restart。。。done
http://ip208-100-42-21.static.xda-developers.com/showthread.php?t=470807
Annoying Touch buttons
I think that the most DHD users have the same problem, touching the buttons at the bottom if you really dont want to.
So my question is if it would be possible to change the "Home" or the "Menu" button (pushing long) from "last used apps" to "turn on/off the touch keys???
that would be awsome
thx Dr.Pepper
Never been an issue for me, although i was anticipating problems with no hardware buttons its been fine...
Pepper90 said:
I think that the most DHD users have the same problem, touching the buttons at the bottom if you really dont want to.
So my question is if it would be possible to change the "Home" or the "Menu" button (pushing long) from "last used apps" to "turn on/off the touch keys???
that would be awsome
thx Dr.Pepper
Click to expand...
Click to collapse
Can't help but say, "you're holding it wrong!"
Seriously though I've never encountered this problem on either this phone or my N1 which has a smaller screen.
How exactly are you managing to press the buttons by mistake?
Regards.
iam the only one who has the problem that he accidently hits a touch key while using the phone or playing a game? every little contact triggers the keys. i.e. if i use the thumb to type a message, holding the phone in the right hand, i sometimes trigger the search key.
my idea is to make it harder to trigger these keys. as they are part of the touchscreen, it sould be possible to do anything that can be done with the touch sreen. my ideas:
1. double-touch; tapping the key 2 times (like a double-klick) triggers it once
2. sweep; i.e. you touch the home-button and sweep out of it, then release. can be even harder with sweeping out and back in.
3. circle-touch; making a little circle over the button triggers it.
other ideas welcome.
---------------------------------
2nd problem: easier unlocking;
i feel it sometimes tricky to unlock the pone, wich is done by pressing the powerbutton at the top of the phone and sweeping on the bottom of the screen. the phone is'nt very small (or i have small hands). if iam holding the phone at the bottom, i can nearly reach the whole touch area with my thumb, but to unlock, i need to use my 2nd hand or to juggle the phone so i can reach the power button with the right hand. with the G1, which had a menu button at the bottom, it was just double-pressing that button and the phone was unlocked. iam looking for a similar easy way to do it.
its just annoying to take the phone out of the pocket and use both handy or juggle around to unlock it...
i dont know it it wastes additional energy to have the touchscreen active, so it can be used to unlock the phone. so my ideas:
1. use the touchscreen to unlock; i.e. draw a pattern, press the bottom key in some order (home, back, menu to unlock)
2.1 use the volume keys. if the screen is disabled, they are used to change the audio volume (or is that only the case, if music is playing?) When holding the phone at the bottom with the right hand, the volume-down hey is easily reachable. so you can do volume-down (which activates the screen) and then slide on the screen like you would do if you have pressed the power button. pressing volume-down with deactivated screen does not change the volume, but pressing it twice does (i.e. 1st press unlocks the screen and 2nd press takes volume down).
2.2 press vol-up and vol-down at the same time to unlock the phone. if i do that the phone vibrates sometimes, no idea why.
3. use acceleromater (or a other sensor?) to unlock, i.e. shaking the phone in a special way (i.e. a circle), activates the screen, so you can unlock it by sliding on it. also full unlock by shaking a phone could be possible (also known as kung-fu-unlock )
other ideas also welcome.
Proximity sensor for unlock when taking it out of the pocket :-D. I have the same problem as you so a 'fix' would be nice
yeah, you take the phone out of the pocket and it unlocks and says "hello raw, how you are doing?".
but that would be nice. question is if constantly checking the prox sensor would drain the battery much. it needs to be checked every 3 seconds or so.
lynxboy said:
Can't help but say, "you're holding it wrong!"
Seriously though I've never encountered this problem on either this phone or my N1 which has a smaller screen.
How exactly are you managing to press the buttons by mistake?
Regards.
Click to expand...
Click to collapse
if i try to use the phone with one hand
seems like here (http://forum.xda-developers.com/showthread.php?t=854073) is another user with that problem.
same problem: http://forum.xda-developers.com/showthread.php?p=9550179#post9550179
Merged threads as topic is similar....
Cheers,
M_T_M