Database Users

power button hack for Cingular 8525?

Does anyone know if there's any type of hack to enable a different button on the Cingular 8525 to be the power on button? Being right-handed, when I pulll out the phone, it's annoying to have to use 2 hands to turn on the phone. I have the AEBPlus program but it only lets you assign a different button to power "off" the phone. I'm looking for a way to program a button on the left-hand side (possibly button 5 [ptt button] or the Windows button [labeled "ok] to power on the phone). Anyone have any ideas?

I guess no, power buttons on almost devices is connected directly to procesor (like reset button and watchdog circuit), and in fact if device is off, no system loaded, there is no way to adjust registry settings to change this.

might sound stupid, but you can try to hold the phone differently? i operate the phone with both hands (am right handed) and either way, you can power on/off the phone with 1 hand.
if holding it in the left hand, use your left hand's index finger wrapped around the back of the phone.
if holding it in the right hand, use the thumb of your right hand.
i know it isn't the solution you were looking for, but it might help

Yeah, I figured that I could do that. It's just that when I wrap my hand around like that, i have a tendency to push out the keyboard and then I have to go back to 2 hands anyway.
In using AEBPlus (or even the default commands under the "buttons" settings) and it wouldn't be so bad if I could figure out a way to get the screen to come back on. But even when I try and set one of the buttons on the right to "screen on/off" it will turn off the screen but won't turn it back on. I'm not talking about a powering on/off of the phone. I'm just talking about a way to turn on/off the screen.

never mind. I figured it out. I had the "key lock" set to the fact that the only button that would turn on the device (if the screen was off) was the power button. I fixed that. Now I'm good to go.

HD Volume button

Dont know if its even possible, but i am finding as i am putting the HD in and out of the sleeve, the volume button, is continually adjusting the volume.
Can this poorly designed button be deactivated???
its a pain in the backside!

i just installed swipe to lock or whatever it's called and it seems to have fixed this issue. when the phone has been put into hibernation (tapping power button) the keys are disabled.
is this what you're after?

I installed AEButtons, there you can add a lot more things, e.g. double click the up volume button for screenshot or an application you like ...

I accidentally fixed it by using a coloured top bar - here

Wake up HD2 with volume button

Hi *.
I've managed to torn flex with 5 buttons Until I found one to replace, I need to adjust HD2 to be usable without them. Without "menu" and "back" I can live, "call" is replaced with manila shortcut to "Phone". Two buttons left - "home" and "end call/power".
I've installed AEBPlus and old volume control, to be able to map volume keys. Long up is mapped to "show today" and it's almost working - hides current application, but doesn't switch to main manila tab. Is there a way to do this?
The bigest problem is with long pressed vol. down. I've assign it to "Switch display Off/On". First function [switching off] works flawless, but waking device doesn't.
Sure there's "shake 'n' wake" and it works great, but hard to call it convenient. Sometimes I have to shake it hard for over a second to wake up. Lookin' like an idiot Is there a way to wakeup HD2 with vol.down.? I'd really appreciate this.

Shameless bump. No idea why, but shake'n'wake stopped workin' (I haven't changed anything) Few restarts didn't help. So right now I can't put HD2 into sleep, or even lock the screen - because there's no way (or at least I don't know it) to prevent lock screen from suspending device.
500£ device unusable because of stupid flex worth quid or two

[HKEY_CURRENT_USER\ControlPanel\Keybd]
"DefaultKeyLock"= 0
restart。。。done
http://ip208-100-42-21.static.xda-developers.com/showthread.php?t=470807

Turn screen on with a touch

In the display setting we can adjust the screem timeout. Mine is on 10 minutes for example.
Is there any application which can turn on the screen just with a touch on the screen (instead of pressing the power button) ?
Would be very nice together with the application "Unlock with WiFi"

I mean is there any application which enables the functionality to get the screen back (phone is not locked) only by touching the screen (instead of pressing the power switch on the top).
I know, folks, it is not a big deal to press the power switch, it is just a little bit more comfort to touch the screen only

I don't, believe so, but you can use the volume keys:
http://forum.xda-developers.com/showthread.php?t=1107041

scoob8000 said:
I don't, believe so, but you can use the volume keys:
http://forum.xda-developers.com/showthread.php?t=1107041
Click to expand...
Click to collapse
Hi scoob800. Thanks, but the volume keys would be pritty "the same" as to press the power button.
Generally spoken. Is it possible (and in case it is) and is there any application which can detect a touch on the screen, even if the screen is off ?

Well, the only thing I can think of is to set your screen to never autolocking and have a screensaver app that leaves the screen black. If you do that your battery will probably drain a good bit seeing as your screen will always be on.
Sent from my Gingerblurred Atrix

You can achieve this with NoLED, but that is not its intended purpose. I will explain how: When you get a notification that would normally trigger your LED, NoLED displays a customizable icon on a black screen. With SGS, which it was developed for, has samoled screen and black uses little to no bat/cpu. This is NOT the case with the Atrix, your battery WILL suffer. So battery aside.. Set NoLED to display the time (that way its always on even when you dont have a new notification). Now play with the settings, tell it to "wake up" with the home key. TaDa!

the short answer is feasibly NO. having the touchscreen on at all times will DESTROY your battery life. your only option is to enable the volume buttons.

I use the volume buttons with no lock screen ..... waaaayyy better then powerbutton
Sent from my MB860 using XDA App

Would like to avoid stress on the buttons
dLo GSR said:
the short answer is feasibly NO. having the touchscreen on at all times will DESTROY your battery life. your only option is to enable the volume buttons.
Click to expand...
Click to collapse
OK. But to be honest, what is the difference to use the volume buttons instead the power button ? I would like to avoid this mechanical stress of these buttons. As I used my last phone ( a Samsung) for 8 years, I am afraid, my ATRIX will not make it such a long time
But I got an other idea. What about one of the four "softkey" buttons ? For example the home button.

1.ATRIX-in-PT said:
OK. But to be honest, what is the difference to use the volume buttons instead the power button ? I would like to avoid this mechanical stress of these buttons. As I used my last phone ( a Samsung) for 8 years, I am afraid, my ATRIX will not make it such a long time
But I got an other idea. What about one of the four "softkey" buttons ? For example the home button.
Click to expand...
Click to collapse
The problem is they're still softkeys and not actual hardware buttons. Using the volume is just easier to press depending how your holding the phone. That and your spreading out that wear of the power button across 3 different buttons.

scoob8000 said:
The problem is they're still softkeys and not actual hardware buttons. Using the volume is just easier to press depending how your holding the phone. That and your spreading out that wear of the power button across 3 different buttons.
Click to expand...
Click to collapse
Soft keys will waste a lot of battery, it isn't a good way to turn on your screen by either soft keys or touchscreen

[Guide] Anti pocket unlock tweak

New guy here!
I'm from holland and I have a 2009 hd2 which is currently running AOKP Milestone 5 SE
So this is my first guide and i'll start with something simple.
Eliminating those frustrating pocket unlocks and the screen turning on in your pocket which drains your battery.
The easiest option is to start using your volume rocker as a unlock button and removing all the front button mappings for waking your phone.
Your power button is still your lock button though.
1. Find out if your rom has any special rom options (e.g. rom control, some toolbox, cynogen mod options etc)
2. Go through those options and try to find something with volume wake, it's probably under lockscreen options.
3. If you have found the option enable it, if not you have to download WidgetLocker in the market it comes with the option in it.
4. Once you've tested it we can begin with disabling the front keys by downloading ButtonRemapper in the market.
5. Now when you're in the app, you are seeing a list of key numbers with their name and function behind it. key number 116 is the only one you need to keep on its original state, it is for the power button when the phone is unlocked.
6. Start by clicking a key and putting its state in NONE and press ok, now do this for the remaining keys, EXCLUDING 116.
7. Hit the apply button and see your hd2 hot rebooting
8. When the phone comes to its senses again, try it out!
Lock with your power button
Unlock with your volume rocker.
It almost feels like a modern android phone with the lock/unlock button on the top or side.
I hope you like it, because I really do!

3ll0s said:
New guy here!
I'm from holland and I have a 2009 hd2 which is currently running AOKP Milestone 5 SE
So this is my first guide and i'll start with something simple.
Eliminating those frustrating pocket unlocks and the screen turning on in your pocket which drains your battery.
The easiest option is to start using your volume rocker as a unlock button and removing all the front button mappings for waking your phone.
Your power button is still your lock button though.
1. Find out if your rom has any special rom options (e.g. rom control, some toolbox, cynogen mod options etc)
2. Go through those options and try to find something with volume wake, it's probably under lockscreen options.
3. If you have found the option enable it, if not you have to download WidgetLocker in the market it comes with the option in it.
4. Once you've tested it we can begin with disabling the front keys by downloading ButtonRemapper in the market.
5. Now when you're in the app, you are seeing a list of key numbers with their name and function behind it. key number 116 is the only one you need to keep on its original state, it is for the power button when the phone is unlocked.
6. Start by clicking a key and putting its state in NONE and press ok, now do this for the remaining keys, EXCLUDING 116.
7. Hit the apply button and see your hd2 hot rebooting
8. When the phone comes to its senses again, try it out!
Lock with your power button
Unlock with your volume rocker.
It almost feels like a modern android phone with the lock/unlock button on the top or side.
I hope you like it, because I really do!
Click to expand...
Click to collapse
Nice guide! Very similiar to my original mod here but you make it a bit more simplified xD

After removing WAKE and WAKE_DROPPED from the keys, clicking buttons doesn't wake the screen (as expected), but lights the buttons, and they stay lit forever (i.e. until the next unlock/lock).
Do you also experience the same thing? Any solution?

d4v0r said:
After removing WAKE and WAKE_DROPPED from the keys, clicking buttons doesn't wake the screen (as expected), but lights the buttons, and they stay lit forever (i.e. until the next unlock/lock).
Do you also experience the same thing? Any solution?
Click to expand...
Click to collapse
Yes this is normal, caused by a gpio wake lock from the kernel. No solution yet, I personally don't care as it drains a lot less battery than having your screen come on
Sent from my HTC HD2 using Tapatalk

elesbb said:
Yes this is normal, caused by a gpio wake lock from the kernel. No solution yet, I personally don't care as it drains a lot less battery than having your screen come on
Sent from my HTC HD2 using Tapatalk
Click to expand...
Click to collapse
gpio don't need wakelocks in kernel, when interrupt is raised, cpu exits suspend and services the raised gpio interrupt. This is problem with bad coding logic of the key's backlight driver, i will see what can be done in some days (really busy atm).

Rick_1995 said:
gpio don't need wakelocks in kernel, when interrupt is raised, cpu exits suspend and services the raised gpio interrupt. This is problem with bad coding logic of the key's backlight driver, i will see what can be done in some days (really busy atm).
Click to expand...
Click to collapse
This is still kernel related though right? as it deals with the driver? And you really dont have to work on it its not that big of a deal, put it on lowwwww priority you do amazing work here so as it is

the most important thing is to not keep anything else metal and/or hard, in your pocket with the hd2. Items like batteries or keys

3ll0s said:
...
Lock with your power button
Unlock with your volume rocker.
...
Click to expand...
Click to collapse
This idea is awesome, thank you!
I've customized it a little bit to save my power button (and so my touchscreen connector).
I've set all my hardware buttons to power, but without wake property.
Now, I can:
Lock with any hardware button
Unlock with volume rocker.

thanks a lots aha