hi all,
i have an IPAQ 914 and i have many issues with bluetooth:
1) no sound on bluetooth headset when i receive a call
2) no sound when i'm doing a call from headset
3) the 914 bluetooth disconnects automatically and i need to reenable it from the menu.
4) the audio of ipaq is redirect at maximun volume on headset if connected with A2DP feature, this causes a lot of noise and the voice command is distorced.
Now i have the Montecristo image and i have the same issue.
can anyone help me?
is there a way to upgrade the bluetooth stack/driver?
Best Regards,
Sold
I'm running this ROM http://forum.xda-developers.com/showpost.php?p=3541058&postcount=4 and bluetooth is working fine so far, A2DP, calls, everything...
TauTau said:
I'm running this ROM http://forum.xda-developers.com/showpost.php?p=3541058&postcount=4 and bluetooth is working fine so far, A2DP, calls, everything...
Click to expand...
Click to collapse
do you use this image on ipaq 914?
the link that you reported has in the signature the model 614.
i report these links to describe our bluetooth issues:
http://social.microsoft.com/forums/.../thread/57d13f5d-3c4b-433f-bedb-509203ad9ad2/
and this CUSTOMER ADVISORY --Document ID: c01614043
http://h20000.www2.hp.com/bizsuppor...Id=101&prodSeriesId=3551665&prodTypeId=215348
the question is:
is there an alternative driver for BLUECORE4ROM chipset?
now with WM 6.1 and WM 6.5 the driver is always BCHS_WINCE_MOBILE_4_7_3.
Regards
Sold
I *think* I run that ROM... it's long on there and afterwards it's hard to tell Where can I check the version of the driver? Then I cann see what version I have
TauTau said:
I *think* I run that ROM... it's long on there and afterwards it's hard to tell Where can I check the version of the driver? Then I cann see what version I have
Click to expand...
Click to collapse
into the menu settings there is the HP asset viewer that reports the bluetooth driver
Related
I found out about this BT stack driver through a thread regarding the toshiba BT stack driver, so i thought: other driver, other thread :wink:
Original thread here: http://forum.xda-developers.com/viewtopic.php?t=15604
Download BlueSoleil CE here: http://ivtcorporation.com/download/BlueSoleil_Download.php#bluesoleilforce
Credits for finding this BT stack go to: rdkay
It has a lot more profiles then the standard MS stack.
Occording to their web site, supported profiles are:
PAN, OPP, SYNC, LAP, DUN, FTP, FAX, HID, SPP, HCRP, BIP, Headset, AV
The manager that comes along with it, is also a lot better then the standard one, more options, more playing around
I played around with it for a while, and i think it is rock sollid. Although I have only tested the SPP profile (with BT GPS). It never crashed, not even on suspend & resume. The radio will be deactivated during suspend though. For me this is perfect, because it will save battery life.
On resume, it will be automatically reactivated.
Installation procedure:
- Download Bluesoleil CE: http://www.bluesoleil.com/update/index.asp
- Before install, delete these reg keys:
[HKEY_LOCAL_MACHINE\Services\BTIcon]
[HKEY_LOCAL_MACHINE\SOFTWARE\microsoft\bluetooth]
- Reboot PPC
- Install Bluesoleil CE
- During setup on PPC select Manual -> USB driver, then let setup reboot
This next step is optional, do this only when you have troubles with your GPRS connection (a newly installed network driver prevents it from operating properly on my device) Delete following reg keys:
[HKEY_LOCAL_MACHINE\Comm\BTNIC]
[HKEY_LOCAL_MACHINE\Comm\BTNIC1]
Reboot once more
Finished! enjoy
Sorry to spoil the celebrations, but I have already tried this stack. Indeed it works fine - except for the dirty details mentioned on the download page:
"Note: If your Bluetooth Hardware device (such as USB Dongle) is not licensed by IVT for using with BlueSoleil, any BlueSoleil version downloaded here can only be used as evaluation version, only 5M data can be transfered through Bluetooth link in evaluation version."
Unfortunately this is true - it shuts down the connection after transfer of 5Mb and after some time (a couple of weeks?) it no longer functions at all. I would be happy to buy the full version of this Bluetooth stack for my MDA Compact, but sadly the company does not seem willing to sell it.
Heimiko said:
I found out about this BT stack driver through a thread regarding the toshiba BT stack driver, so i thought: other driver, other thread :wink:
(...)
Finished! enjoy
Click to expand...
Click to collapse
WOW :lol:
is this the solution i've been looking for, for my Parrot CK3000 carkit?
Just 3 questions before i will try this one tonight:
- Is it un-installable? (cause you change the regkeys)
- You had no problems with ActiveSync? Cause i would really feel bad loosing that!
- If it works on the Magican, it should also work on my dutch MDA Compact (T-Mobile, but ROM upgraded to 1.06, radio 1.05) right?
Thomas
lars_juhl said:
Sorry to spoil the celebrations, (...)
Click to expand...
Click to collapse
I want a crack crack crack!!!???
anybody?
(If they are not willing to sell it...)
lars_juhl said:
Sorry to spoil the celebrations, but I have already tried this stack. Indeed it works fine - except for the dirty details mentioned on the download page:
"Note: If your Bluetooth Hardware device (such as USB Dongle) is not licensed by IVT for using with BlueSoleil, any BlueSoleil version downloaded here can only be used as evaluation version, only 5M data can be transfered through Bluetooth link in evaluation version."
Unfortunately this is true - it shuts down the connection after transfer of 5Mb and after some time (a couple of weeks?) it no longer functions at all. I would be happy to buy the full version of this Bluetooth stack for my MDA Compact, but sadly the company does not seem willing to sell it.
Click to expand...
Click to collapse
aaaahjjj, bummer!! Have you tried emailing the company, asking if you could buy it from them? As far as it seems now, this stack is working perfectly, and I am REALY happy if I could buy it from them........
wroet said:
Just 3 questions before i will try this one tonight:
- Is it un-installable? (cause you change the regkeys)
- You had no problems with ActiveSync? Cause i would really feel bad loosing that!
- If it works on the Magican, it should also work on my dutch MDA Compact (T-Mobile, but ROM upgraded to 1.06, radio 1.05) right?
Thomas
Click to expand...
Click to collapse
- You should make a backup of the reg keys you delete, only then it will be reversible.
- No problems with activesync of any kind.
- I have radio version 1.05 myself, so for that it should work. For ROM however, I have version 1.03, since too many ppl were complaining about bugs & instability.
--------
Also, I have written an email to their company, asking if they would sell it, and howmuch it would cost. Lets see if we'd get some awnser. I could live with a 60 days limit (i would reinstall my PPC long before that), but a 5 meg limit....... :?
So, which devices are licensed?
Found a configuration file, so we can do some additional tinkering :wink:
File: \Windows\bttl.ini
The following file has obviously to do with the license for application.
I suspect, that if we might be successfull with tickering in this file, we might get a full blown version. But lets first wait if I get awnsers from the company if they'd sell it; I prefer a legal version.
License File: \Windows\IVTLicConf.dat
Also, an additional ini file, that appears to be the same (?) as my first reported bttl.ini : \Windows\BTDynamicConfig.ini
for me it is working perfect. thx a lot heimiko.
Anybody tried this stuck with BT headsets...?...I would like to know if it works with SE HBH-660 or some other BT headset supporting Caller ID...
Regards,
Primoz
with the parrot ck3300 it works just perfect...
xlephant said:
with the parrot ck3300 it works just perfect...
Click to expand...
Click to collapse
Xlephant: I was really looking for a good stack for my ck3000 also! Can you tell me if it allows me to upload the phone numbers to my carkit also and use the voicedialing app inside the ck3000? (Cause with my old Sony Ericsson T610 I could)
:shock:
Thomas
don't know much about the ck3000. but i have no problems to upload the phonebook with this stack. but i was also be able to upload it with the ms stack(the ck3300 works perfect with the ms stack). i swaped the stack only because of the PAN profil.
I don't understand what everyone is getting excited about. If you cannot buy it, then it is useless to me.
Regards,
William
thats true but i think there should be a way to buy it or to reset the 5mb limit.
Hello,
Does this stack allow voice dialing with a bluetooth headset ?
Thanks in advance...
Largo_Winzclav said:
Hello,
Does this stack allow voice dialing with a bluetooth headset ?
Thanks in advance...
Click to expand...
Click to collapse
It should, provided you have a dialer app that does. And as the bluetooth is switched off in standby you would have to initiate the dial-up from the device, not from the headset.
Radio issue
What do you mean by the radio will be deactivated during suspend? The Bluetooth radio or won't I be able to recieve any incomming calls on my MDA Compact?
Has anyone actually experienced any of the mentioned limitations, i.e. 5 MB limit, etc.?
Cheers for the reply!
I should try it
Hi All. i've got a qtek 9000 and i can't use my bt headphones.
I bought this one with the ipaq and than i succed using it also with my qtek 9090
right now i can't with the new 9000 and i have no idea how to do it
please can someone help me?
Please be more specific as to where the problem is. You say you got it working on the 9090 but not on the 9000. Exactly what part of the pairing process does the difference come out?
Ops, i miss it!
I installed on the 9090 an audio driver that add a new voice in the bt connection manager.
The high quality stereo headphones. This driver couldn't be installed on the new wm5 because was designed for pocket pc 2003
so rightnow i can pair the device but no service is offered when i try to discover device services.
So even if i have paired the device i can't use it because no service is found.
i hope i've explained the problem
tnk u 4 your support
Barinight.com said:
Ops, i miss it!
I installed on the 9090 an audio driver that add a new voice in the bt connection manager.
The high quality stereo headphones. This driver couldn't be installed on the new wm5 because was designed for pocket pc 2003
so rightnow i can pair the device but no service is offered when i try to discover device services.
So even if i have paired the device i can't use it because no service is found.
i hope i've explained the problem
tnk u 4 your support
Click to expand...
Click to collapse
You mean it cannot be paired without running a particular software? Yikes... So when you put the Bluetooth headset to discoverable mode, then try detecting it from the Universal, it sees it but there are just no services available, am I right?
So it seems that the one at fault is the Bluetooth stack installed in the Universal... In that case, I cannot help you... SOrry
The Universal does not support A2DP or what HP calls High Quality Stereo, as such it does not support your headphones. A2DP is suppose to be part of what is included in the MSFP update but i-mate has chosen not to include it. Until someone releases A2DP support your headphones will not work. Now if you happen to read German I understand their is a German ROM that supports this feature.
Otherwise it just a question of waiting till someone releases this update, if they do.
i think that is the stack but the question is:
the 9090 doesn't support the high quality too but installing the driver things changes so i won't belive that thare isn't a driver for the 9000
i tried to find something from Widcom (i hope is the right way to write!) nut i dind't find anythink
so i hope that someone can help me because i've payed 120€ the headset and i will love to continue using it!
When I run Tomtom6 with my Emtac BT GPS,it works perfectly.
When I use my headset motorolla HP500, it works perfectly.
But when I launch my headset when using tomtom6,it always disconnects the GPS.
Coud someone help me,please?
I have the same problem with the original WM6 of Helmi.
I'm using the same ROM as you. Does anybody have this problem with the others ROMs?
Other roms have same problem!
HKLM\Comm\BTPAN1\Parms\MaxConnections maybe ? =)
slowmouse said:
HKLM\Comm\BTPAN1\Parms\MaxConnections maybe ? =)
Click to expand...
Click to collapse
No dice, I changed it from 1 to 2 and same results. It has been this way with every 6.x ROM I have flashed. Still waiting for a solution.
Bt problem
Hi !
And if we change the bluetooth broadcomm stack ? it was only an idea ....
Tamage
I also tried to increase the maxcommunications value with no success.
I haven't tried the stack software yet because in some posts, I've read that it solved the bluetooth file transfer but not our problem. Maybe I will try but I'm not confident on it.
I'm downloading the 6.1 ROM from PDAviet and will inform you in many minutes about my result.
Unfortunately, it's the same result with the 6.1ROM from PDAViet
I think that there isn't a solution for this problem...it's a limit of BT stack of BA.
No,it's not due do the BT stack of the BA because it runs perfectly with the original WM2003SE. It should be due to a BT different management from the OS WM5 and 6.
syl202gas said:
No,it's not due do the BT stack of the BA because it runs perfectly with the original WM2003SE. It should be due to a BT different management from the OS WM5 and 6.
Click to expand...
Click to collapse
Well it didn't run "perfectly"on WM2003SE. It also was a main problem on that OS too. Especially in receiving calls. The opposite site wasn't heard!
viscocesco said:
I think that there isn't a solution for this problem...it's a limit of BT stack of BA.
Click to expand...
Click to collapse
I presume you meant to say a limit of the BT hardware in the BA not the stack as the stack is software. This is a known bug in the WM5/6/6.1 ROMS, multiple connections works fine in WM2003SE but not in the hacked ROMS.
On my MDA3 it works fine, BT GPS and BT Headset together.
Have a look here.
But sound ist only working on phone, the voice/sound from navi won't come.
I tried BTAudioToggle but all I got was random noise.
Greets Rossi
syl202gas said:
When I run Tomtom6 with my Emtac BT GPS,it works perfectly.
When I use my headset motorolla HP500, it works perfectly.
But when I launch my headset when using tomtom6,it always disconnects the GPS.
Coud someone help me,please?
Click to expand...
Click to collapse
Install Broadcom 1.7
Hi,
i have a new JVC car radio (AVX33) with builtin Bluetooth and a Bluetooth GPS Mouse. Everything work fine also A2DP stereo but only one at time When my BA (with last Explode Rom) is connected to the radio and i want navigate with TomTom or any other programm i cant connect to the GPS mouse.
Disconnect the Radio, the GPS Mouse worked fine but when i reconnect the radio, it disconnect the GPS mouse.
Is there any way to use both at the same time?
Thanks,
tasar
It seems that all BA WM6 (6.1) ROM do not manage correctly multiple connections with BT devices at the same time. There is no way, for example, to grant BT ActiveSync connection while connected to a stupid BT hearphone (or to a GPS unit, as in your example).
I will downgrade to WM 2003 very soon...
Not good to hear But when i go back to 2003 i cant play music over BT,right? No A2DP with 2003?
Is this a problem form the BA or from WM6? I tkink to buy another PDA (which?) but when there is the same problem, i can keep my BA.
Tasar
Correct Mixture can be possible
Unfortunately, the current answer is a mixture between the WWE os and BT Software with know sacrafice.
My current build is: BA 5.2.19202 with MS BT
This is the current issue that you are defining.
Previous build:
TouchFlo 5.2.1938 with Broadcom 1.7.1
This allows the use of BT GPS and A2DP stereo at the same time.
Unfortunately it is at the cost of the phone feature. If you pair the headset feature of the of the stereo device, it will always choose the headset and not A2DP.
So the end question is: what enviroment do you want. A phone pda or pda
One final issue: The Broadcom 1.7.1 software does not work with all os. My 5.2.1902 will not work and the uninstall restores an older version of the MS BT with problems. I ended up reflashing the device.
aerotrike said:
So the end question is: what enviroment do you want. A phone pda or pda
Click to expand...
Click to collapse
What a question Of course i want a Phone PDA!
But is the Bluetooth Problem an BA problem or a WM6? I think to buy another/newer PDA but when this is an WM6 Problem i can keep my BA.
Tasar
Push this to top again.
Is there a solution for this problem...?
I want to connect my BA (WM6) to a BT-Mouse and to a BT-Headset (mono) at the same time. Does this cause any Problems, or does it work...?
Greets Rossi
You should try; i connect my BT-GPS receiver and my BT-headset in the same time, with no problems.
Can you tell which GPS and Headset, and what are youre settings...?
I tried with these and it won't work:
- Navilock BT-348 Bluetooth GPS
- MIDLAND Rider Bluetooth Headset
Which version of WM6, eg. HELMIs...?
Greets Rossi
HI,
Can any kind soul post the cab install for the WIDCOOM stack that the HD2 s using ?
NO One ?
Anyone have the cab ? Please.....thanks.
Widcomm
yeokpd said:
Anyone have the cab ? Please.....thanks.
Click to expand...
Click to collapse
Maybe that nobody understands your question. Widcomm bluetooth stack is in every HD2 rom - each stock rom and even in the cooked roms e.g. the Artemis rom.
no cab, extract a ROM, then look into sys folder and oemdriver...
Original bluetooth stack instead of Widcomm
smaberg said:
no cab, extract a ROM, then look into sys folder and oemdriver...
Click to expand...
Click to collapse
@smaberg: I have the problem the other way: I use the HD2 with the Artemis rom and would very much like to get rid of the Widcomm bluetooth stack, because it does not work with my car. I have also a diamond (original stock rom with 6.1 and standard stack) and an old touch with an 6.5 Windows with standard stack. The original Windows bluetooth stack works with my car without any problems. Is there a way to deinstall Widcomm and to install the original Windows stack at my HD2?
+1 for removal of widcomm i have similar problem but mine connects with car sudio and works well but the stack mixes sound very bad, and you cannot control the volume level on phone. So for instance when im listening to music and fireup a navigation system the commands from the system are badly mixed in with music too loud choppy cracky etc it's pain to ears. Before on xperia (with smabergs rom ) i did not had such a problem the playback was plain and smooth.
best Regards
Another one here for a way to replace the Widcomm stack as it won't work with my igo / think outside bluetooth mouse.
The stack seems to be different than from others.
I can send bluetooth messages from my HD2 to other bluetooth clients, no problem. But the HD2 does not ".AcceptBluetoothClient()"(32feet.net) so maybe the stack is somehow broken. The stack just works in one direction
anyone got Bluetooth stack "improven"
This BT Stack is crap. I can't get this device working as other phones do.
Anyone has a solution for it?
I have a Pioneer AVH-4100 car in-dash Multimedia system + CD-BTB200 Bluetooth adapter! And i can't seem to do the following:
1- Dial numbers
2- Access phonebook
3- Voice recognition
Everything else works fine, but unfortunately the most important features doesn't..
I wish JETware was compatible with the HD2..
Any idea what to do?
thx