HI,
Can any kind soul post the cab install for the WIDCOOM stack that the HD2 s using ?
NO One ?
Anyone have the cab ? Please.....thanks.
Widcomm
yeokpd said:
Anyone have the cab ? Please.....thanks.
Click to expand...
Click to collapse
Maybe that nobody understands your question. Widcomm bluetooth stack is in every HD2 rom - each stock rom and even in the cooked roms e.g. the Artemis rom.
no cab, extract a ROM, then look into sys folder and oemdriver...
Original bluetooth stack instead of Widcomm
smaberg said:
no cab, extract a ROM, then look into sys folder and oemdriver...
Click to expand...
Click to collapse
@smaberg: I have the problem the other way: I use the HD2 with the Artemis rom and would very much like to get rid of the Widcomm bluetooth stack, because it does not work with my car. I have also a diamond (original stock rom with 6.1 and standard stack) and an old touch with an 6.5 Windows with standard stack. The original Windows bluetooth stack works with my car without any problems. Is there a way to deinstall Widcomm and to install the original Windows stack at my HD2?
+1 for removal of widcomm i have similar problem but mine connects with car sudio and works well but the stack mixes sound very bad, and you cannot control the volume level on phone. So for instance when im listening to music and fireup a navigation system the commands from the system are badly mixed in with music too loud choppy cracky etc it's pain to ears. Before on xperia (with smabergs rom ) i did not had such a problem the playback was plain and smooth.
best Regards
Another one here for a way to replace the Widcomm stack as it won't work with my igo / think outside bluetooth mouse.
The stack seems to be different than from others.
I can send bluetooth messages from my HD2 to other bluetooth clients, no problem. But the HD2 does not ".AcceptBluetoothClient()"(32feet.net) so maybe the stack is somehow broken. The stack just works in one direction
anyone got Bluetooth stack "improven"
This BT Stack is crap. I can't get this device working as other phones do.
Anyone has a solution for it?
I have a Pioneer AVH-4100 car in-dash Multimedia system + CD-BTB200 Bluetooth adapter! And i can't seem to do the following:
1- Dial numbers
2- Access phonebook
3- Voice recognition
Everything else works fine, but unfortunately the most important features doesn't..
I wish JETware was compatible with the HD2..
Any idea what to do?
thx
Related
Do anyone have working widcom stack for artemis? I read in helmi's universal forum that it could be done via some reg changes. Made it anyone working. I'm gonna give it a try. Keep fingers crossed
didn't have time to try everything.
download
KING HELMI_C's widcomm stack
install
ad following registry entries:
Code:
unfortunately too long post :mad: so check the .reg included
I just finished so far I tried
filetransfer Orbit <> Universal works
AD2P (or whats name bt stereo) Orbit<> Moto HT820
AVPRC (or whats name remote control - next,previous,pause,play) Orbit<> Moto HT 820 (using m$hit media player) works
PAN not yet
Headset not yet.
regfile included.
to Helmi: I posted this in artemis upgrade forum as well
please feel free to post or PM or mail me any bugs.....
BTW: I'm using O2 Orbit - Arte200
Sorry for noob question ... but what is the difference betwin Original one and Widcom?
Cheers ...
check menneisys (soory for misspelling) posts somewhere in General/networking
it has more bt profiles at least
pnsnake:
Are you with helmi also working on this hack?
Your widcom stack made for universal works on artemis as well?
Do I simpy follow the same procedure described by you on the link specified by you?
Apps such as Sniper, which require widcom/broadcom stack, will work on Artemis, as with MS stack it is not?
For newbies here is the article from pocketpcmag.com blog about the difference:
http://www.pocketpcmag.com/blogs/index.php?blog=3&p=1649&more=1&c=1&tb=1&pb=1#more1649
dont know, i'm just trying to port it for arte, my Universal is running with Widcomm, so i decided to port it to my Orbit.
So far A2DP,AVCPR is working, file transfer, serial port are working. Headset profile not yet. I'm still trying to figure it out. Maybe Helmi will help.
so far i can transfer all sound from phone to my moto ht820 but not yet phonecalls
Tnx for quick reply. Guess I will try it out. I hope it is easy to remove it and come back to default settings (ms stack). I don't need bluetooth profiles, neither plan on using bt earphones.
File transfer (both ways), bluetooth sync and modem are indeed required. Hope it works.
I have a big problem. I tried this stack and bluetoothe works fine but GPS stoped working. If I uninstall it and try to activate MS Bluetooth stack, bluetooth stops working. So I have to decide: Bluetooth or GPS.
Is there any possibility to reactivate the MS Bluetooth stack?
Ah, I do have WM6 btw...
I was looking at a fix to get my car working with my WM6 Artemis, and thinking of trying the Widcomm stack. However, reading through this thread am I right in understanding that this version of the Widcomm stack won't yet support hands-free kits anyway?
When I run Tomtom6 with my Emtac BT GPS,it works perfectly.
When I use my headset motorolla HP500, it works perfectly.
But when I launch my headset when using tomtom6,it always disconnects the GPS.
Coud someone help me,please?
I have the same problem with the original WM6 of Helmi.
I'm using the same ROM as you. Does anybody have this problem with the others ROMs?
Other roms have same problem！
HKLM\Comm\BTPAN1\Parms\MaxConnections maybe ? =)
slowmouse said:
HKLM\Comm\BTPAN1\Parms\MaxConnections maybe ? =)
Click to expand...
Click to collapse
No dice, I changed it from 1 to 2 and same results. It has been this way with every 6.x ROM I have flashed. Still waiting for a solution.
Bt problem
Hi !
And if we change the bluetooth broadcomm stack ? it was only an idea ....
Tamage
I also tried to increase the maxcommunications value with no success.
I haven't tried the stack software yet because in some posts, I've read that it solved the bluetooth file transfer but not our problem. Maybe I will try but I'm not confident on it.
I'm downloading the 6.1 ROM from PDAviet and will inform you in many minutes about my result.
Unfortunately, it's the same result with the 6.1ROM from PDAViet
I think that there isn't a solution for this problem...it's a limit of BT stack of BA.
No,it's not due do the BT stack of the BA because it runs perfectly with the original WM2003SE. It should be due to a BT different management from the OS WM5 and 6.
syl202gas said:
No,it's not due do the BT stack of the BA because it runs perfectly with the original WM2003SE. It should be due to a BT different management from the OS WM5 and 6.
Click to expand...
Click to collapse
Well it didn't run "perfectly"on WM2003SE. It also was a main problem on that OS too. Especially in receiving calls. The opposite site wasn't heard!
viscocesco said:
I think that there isn't a solution for this problem...it's a limit of BT stack of BA.
Click to expand...
Click to collapse
I presume you meant to say a limit of the BT hardware in the BA not the stack as the stack is software. This is a known bug in the WM5/6/6.1 ROMS, multiple connections works fine in WM2003SE but not in the hacked ROMS.
On my MDA3 it works fine, BT GPS and BT Headset together.
Have a look here.
But sound ist only working on phone, the voice/sound from navi won't come.
I tried BTAudioToggle but all I got was random noise.
Greets Rossi
syl202gas said:
When I run Tomtom6 with my Emtac BT GPS,it works perfectly.
When I use my headset motorolla HP500, it works perfectly.
But when I launch my headset when using tomtom6,it always disconnects the GPS.
Coud someone help me,please?
Click to expand...
Click to collapse
Install Broadcom 1.7
Hi,
i have a new JVC car radio (AVX33) with builtin Bluetooth and a Bluetooth GPS Mouse. Everything work fine also A2DP stereo but only one at time When my BA (with last Explode Rom) is connected to the radio and i want navigate with TomTom or any other programm i cant connect to the GPS mouse.
Disconnect the Radio, the GPS Mouse worked fine but when i reconnect the radio, it disconnect the GPS mouse.
Is there any way to use both at the same time?
Thanks,
tasar
It seems that all BA WM6 (6.1) ROM do not manage correctly multiple connections with BT devices at the same time. There is no way, for example, to grant BT ActiveSync connection while connected to a stupid BT hearphone (or to a GPS unit, as in your example).
I will downgrade to WM 2003 very soon...
Not good to hear But when i go back to 2003 i cant play music over BT,right? No A2DP with 2003?
Is this a problem form the BA or from WM6? I tkink to buy another PDA (which?) but when there is the same problem, i can keep my BA.
Tasar
Correct Mixture can be possible
Unfortunately, the current answer is a mixture between the WWE os and BT Software with know sacrafice.
My current build is: BA 5.2.19202 with MS BT
This is the current issue that you are defining.
Previous build:
TouchFlo 5.2.1938 with Broadcom 1.7.1
This allows the use of BT GPS and A2DP stereo at the same time.
Unfortunately it is at the cost of the phone feature. If you pair the headset feature of the of the stereo device, it will always choose the headset and not A2DP.
So the end question is: what enviroment do you want. A phone pda or pda
One final issue: The Broadcom 1.7.1 software does not work with all os. My 5.2.1902 will not work and the uninstall restores an older version of the MS BT with problems. I ended up reflashing the device.
aerotrike said:
So the end question is: what enviroment do you want. A phone pda or pda
Click to expand...
Click to collapse
What a question Of course i want a Phone PDA!
But is the Bluetooth Problem an BA problem or a WM6? I think to buy another/newer PDA but when this is an WM6 Problem i can keep my BA.
Tasar
Push this to top again.
Is there a solution for this problem...?
I want to connect my BA (WM6) to a BT-Mouse and to a BT-Headset (mono) at the same time. Does this cause any Problems, or does it work...?
Greets Rossi
You should try; i connect my BT-GPS receiver and my BT-headset in the same time, with no problems.
Can you tell which GPS and Headset, and what are youre settings...?
I tried with these and it won't work:
- Navilock BT-348 Bluetooth GPS
- MIDLAND Rider Bluetooth Headset
Which version of WM6, eg. HELMIs...?
Greets Rossi
Hi there,
is it possible to install an alternative BT stack on the TP2? I can't pair with a BT mouse and keyboard and want to try if replacing BT stack might solve this?
I guess grabbing another stack from another model might brick my phone or isn't that so risky
Tnx.. Marco
I replaced the bt stack on my Hermes once.
It did work but it kinda wrecked my wm 6.1 install, causing horrible performance.
I guess (esp at this moment) your best bet is to get the current bt stack to work with your devices.
I personally love the new BT stack, the default microsoft stack doesn't seem to support anything and is incredibly slow.
Stoway BT drivers can be downloaded here it probably doesnt have direct support for the Rhodium, but if you check which other devices used a Widcomm Stack, then it should work.
Cheers,
Beasty
Anyone tried to install MS Bluetooth Stack?
I dont think you can just "install" a BT stack.... although I wish you could...
it is possible tbough with a lot of driver modifications.
For sure it will be required to cook the MS bluetooth stack into the ROM instead of just install, but many other parts of the rom are using the widcomm stack so it will be a big job.
Its a shame, because i found the sound via A2DP was better via the MS stack, and other users have found the widcomm stack unreliable with car kits or hands free headsets.
I think a better approach would be for a updated widcomm stack
whether they update the widcomm stack, or change it for MS, I don't care, I just wish HTC would hurry up and do it... so many people have problems with it.
I've tried and failed... The Leo and the Rhodium use different BT/Wifi chipsets that arent compatible with the MS BT Stack
Oh dear, that doesn't sound good.
Thank you very much for trying to do it anyway NRG.
NRGZ28 said:
I've tried and failed... The Leo and the Rhodium use different BT/Wifi chipsets that arent compatible with the MS BT Stack
Click to expand...
Click to collapse
Not compatible....